5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




欧洲包装标准(EN packing standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号 中文名称 英文名称
CR 12340-1996 包装材料 对包装系统进行寿命周期盘点分析的建议 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems
CR 13504-2000 包装材料 材料回收 回收材料最小含量标准 Packaging - Material recovery - Criteria for a minimum content of recycled material
CR 13686-2001 包装材料 来自包装废弃物的能源回收的最佳化 Packaging - Optimization of energy recovery from packaging waste
CR 13688-2000 包装材料 材料重复利用 避免持续阻碍重复利用的物资和材料的需求报告 Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
CR 13695-1-2000 包装材料 关于测量和验证四种重金属和其它危险物资存在于包装材料中并向环境释放的要求 第1部分:关于测 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging
CR 13695-2-2002 包装材料 关于测量和验证四种重金属和其它危险物资存在于包装材料中并向环境释放的要求 第2部分:关于测 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa
CR 13910-2000 包装材料 包装材料寿命周期分析标准和方法学报告 Packaging - Report on criteria and methodologies for life cycle analysis of packaging
CR 14311-2002 包装材料 标志和材料识别系统 Packaging - Marking and material identification system
CR 14376-2002 粘合剂 纸和板、包装材料和一次性卫生产品用粘合剂 粘合过程的描述和评估 Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process
EN 1086-1995 食品运输袋 袋型选择和涉及包装物内袋的推荐规范 Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed
EN 12246-1999 平板架和包装用木材的质量分级 Quality classification of timber used in pallets and packaging
EN 12248-1999 工业包装用锯材 允许偏差和最佳尺寸 Sawn timber used in industrial packaging - Permitted deviations and preferential sizes
EN 12374-1998 包装 软管 术语 Packaging - Flexible tubes - Terminology
EN 12375-1998 包装 软铝管 壁厚测定方法 Packaging - Flexible aluminium tubes - Wall thickness determination method
EN 12377-1998 包装 软管 封闭气密性的试验方法 Packaging - Flexible tubes - Test method for the airtightness of closures
EN 12702-2000 纸、纸板包装和易处置卫生品用粘合剂 潜在胶粘层的阻塞的测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers
EN 12703-1999 纸、纸板、包装和易处置卫生品用粘合剂 低温柔韧性和冷裂开温度的测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
EN 12704-1999 纸、纸板、包装和易处置卫生品用粘合剂 含水胶粘剂起泡性的测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives
EN 12726-2000 包装 软木塞和回头明显的瓶口用口径为18.5mm的塞软木塞的瓶口 Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and temper evident capsules
EN 12960-2001 纸和纸板、包装及一次性卫生产品用粘合剂 抗剪切力的测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
EN 13010-2003 包装 单件包装 显示板的尺寸和要求 Packaging - Unit packaging - Dimensions and requirements for pegboard display
EN 13025-2000 包装 轻薄金属包装 标称填充容积最大可达40000毫升的圆、柱形和锥形通用金属容器 Packaging - Light gauge metal packaging - Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
EN 13026-2001 包装 轻薄金属包装 标称填充容积最大可达30000毫升的非圆、柱形和锥形通用金属容器 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml
EN 13027-2001 包装 轻薄金属包装 根据标称毛带盖容积确定的顶部开口圆罐 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
EN 13028-2001 包装 轻薄金属包装 根据标称填充容积确定的加或不加气饮品用顶部开口圆罐 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes
EN 13029-2001 包装 轻薄金属包装 插入式塑料封闭开口 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
EN 13045-2000 包装 挠性柱形塑料管 尺寸和公差 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
EN 13046-2000 包装 挠性柱形金属管 尺寸和公差 Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances
EN 13047-2000 包装 挠性锥形金属管 尺寸和公差 Packaging - Flexible conical metallic tubes - Dimensions and tolerances
EN 13048-2000 包装 挠性铝管 内部漆膜厚度测量法 Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
EN 13054-2001 包装 全填充运输包装 测定包装重心的试验方法 Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package
EN 13117-1-2000 运输包装 可再用刚性塑料分配箱 第1部分:一般应用 Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application
EN 13117-2-2000 运输包装 可再用刚性塑料分配箱 第2部分:通用测试规范 Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing
EN 13193-2000 包装 包装和环境 术语 Packaging - Packaging and the environment - Terminology
EN 13199-1-2000 包装 小负荷搬运系统 第1部分:普通要求和试验方法 Packaging - Small load carrier systems - Part 1: Common requirements and test methods
EN 13199-2-2000 包装 小负荷搬运系统 第2部分:柱状堆叠系统(CSS) Packaging - Small load carrier systems - Part 2: Column Stackable System (CSS)
EN 13199-3-2000 包装 小负荷搬运系统 第3部分:捆绑堆叠系统 Packaging - Small load carrier systems - Part 3: Bond Stackable System (BSS)
EN 13246-2001 包装 拉伸钢带规范 Packaging - Specification for tensional steel strapping
EN 13247-2001 包装 载荷提升、捆绑和固定用拉伸钢带规范 Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads
EN 13393-2001 包装 边缘保护器规范 Packaging - Specification for edge protectors
EN 13394-2001 包装 非金属拉伸带规范 Packaging - Specification for non-metallic tensional strapping
EN 13427-2000 包装 包装和包装废物领域中采用欧洲标准的要求 Packaging - Requirements for the use of European standards in the field of packaging and packaging waste
EN 13428-2000 包装 制造和合成的特殊要求 防止资源减少 Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
EN 13429-2000 包装 再生 Packaging - Reuse
EN 13430-2000 包装 以材料重复利用的方式回收的包装的要求 Packaging - Requirements for packaging recoverable by material recycling
EN 13431-2000 包装 以能量再生的方式回收的包装的要求,包括最小热值规范 Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
EN 13432-2000 包装 通过复合和降解而回收的包装的要求 包装终验试验大纲和评估标准 Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
EN 13437-2003 包装和材料再生 再生方法准则 再生过程描述和流程图 Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart
EN 13439-2003 包装 能量回收率 定义和计算方法 Packaging - Rate of energy recovery - Definition and method of calculation
EN 13440-2003 包装 再生率 定义和计算方法 Packaging - Rate of recycling - Definition and method of calculation
EN 13461-2001 包装 圆柱挠性层压管 尺寸和公差 Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
EN 13538-3-2002 羽绒制品 睡袋几何特性的测定 第3部分:重载下的体积和易包装性 Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing
EN 13590-2003 包装 用于各种零售物品运输的柔性运输袋 容积和承载力的一般特性和试验方法的测定 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
EN 13593-2003 包装 收集家庭废物用纸袋 类型、要求和试验方法 Packaging - Paper sacks for household waste collection - Types, requirements and test methods
EN 13626-2003 包装 箱平板架 通用要求和试验方法 Packaging - Box paletts - General requirements and test methods
EN 13628-1-2002 包装 挠性包装材料 用静态净空气相色谱法测定残余溶剂 第1部分:绝对法 Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods
EN 13628-2-2002 包装 挠性包装材料 用静态净空气相色谱法测定残余溶剂 第2部分:工业方法 Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
EN 13920-14-2003 铝和铝合金 废料 第14部分:消费品铝包装生产的废料 Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings
EN 13920-15-2003 铝和铝合金 废料 第15部分:消费品铝包装产生的去涂层铝废料 Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings
EN 14045-2003 包装 在特定堆放条件下包装材料定向试验中的分解的评定 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
EN 14046-2003 包装 在可控堆肥条件下包装材料极限有氧生物降解性的评估 二氧化碳释放的分析方法 Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide
EN 14047-2002 包装 在水介质中包装材料极限有氧生物降解性的测定 释放二氧化碳的分析方法 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
EN 14048-2002 包装 在水介质中包装材料极限有氧生物降解性的测定 用闭式呼吸测定计测量需氧量的方法 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
EN 14053-2003 包装 由波纹或实心纤维板制造的包装材料 型号和结构 Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction
EN 14054-2003 包装 纸和纸板包装 纸箱设计 Packaging - Paper and paperboard packaging - Design of cartons
EN 14149-2003 包装 装满的运输包装和单荷载 用旋转跌落法进行的冲击试验 Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop
EN 14182-2002 包装 术语 基本术语和定义 Packaging - Terminology - Basic terms and definitions
EN 1719-1998 纸和纸板、包装材料和一次性卫生制品用粘合剂 压力敏感粘合剂粘着力的测定 环行粘着力的测定 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack
EN 1720-1998 纸和纸板 包装和一次性用卫生制品用粘合剂 分散性的测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability
EN 1721-1998 纸和纸板、包装材料和一次性卫生产品用粘合剂 压敏粘合剂表面粘性的测量 滚球粘着力的测定 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack
EN 1895-2001 纸和纸板、包装材料和一次性卫生制品用粘合剂 挠性对挠性组装件的180 °"T"剥离试验 Adhesives for paper and board, packaging and disposable sanitary products - 180°- "T" peel test for a flexible-to-flexible assembly
EN 1896-2001 纸和纸板、包装材料和一次性卫生制品用粘合剂 抗拉伸强度和伸张度的测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
EN 22206-1992 包装 满装运输包装 试验时包装件的标识 Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987)
EN 22248-1992 包装 满装运输包装 跌落垂直冲击试验 Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985)
EN 22876-1992 包装 满装的运输包装 滚动试验 Packaging; complete, filled transport packages; rolling test (ISO 2876:1985)
EN 23-1-1978 洗涤粉和清洁粉的包装 纤维板硬纸盒和圆筒的尺寸和体积 Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board
EN 24178-1992 满装的运输包装 分类检验 记录的信息 Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980)
EN 24180-1-1992 满装的运输包装 性能计划编制的一般规则 第1部分:一般原则 Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980)
EN 24180-2-1992 满装的运输包装 性能计划编制的一般规则 第2部分:定量的数据 Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980)
EN 26590-1-1992 包装 袋 名词和种类 第1部分:纸袋 Packaging; sacks; vocabulary and types; part 1: paper sacks (ISO 6590-1:1983)
EN 26590-2-1992 包装 袋 名词和种类 第2部分:热塑柔性薄膜袋 Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986)
EN 26591-1-1992 包装 袋 测量的方法和说明 第1部分:.空纸袋 Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984)
EN 26591-2-1992 包装 袋 测量的方法和说明 第2部分:.热塑柔性薄膜空袋 Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
EN 26599-1-1992 包装 袋 试验的条件 第1部分:纸袋 Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983)
EN 27023-1992 包装 袋 空纸袋检验抽样方法 Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983)
EN 27965-1-1992 包装 袋 跌落试验 第1部分:纸袋 Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984)
EN 28317-1992 防止儿童拆开的包装 可再次包装的要求和试验程序 Child-resistant packaging; requirements and testing procedures for reclosable packages (ISO 8317:1989)
EN 28474-1992 包装 满装的运输包装 浸水试验 Packaging; complete, filled transport packages; water immersion test (ISO 8474:1986)
EN 28768-1992 包装 满装的运输包装 倒侄塌试验 Packaging; complete, filled transport packages; toppling test (ISO 8768:1986)
EN 29454-1-1993 软钎焊剂 分类和要求 第1部分:.分类、标记和包装 Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990)
EN 415-1-2000 包装机械安全 第1部分:包装机械及相关设备的术语和分类 Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-2-1999 包装机械安全 第2部分:预成型刚性容器包装机械 Packaging machines safety - Part 2: Pre-formed rigid container packaging machines
EN 415-3-1999 包装机械安全 第3部分:成型、填充和密封机械 Safety of packaging machines - Part 3: Form, fill and seal machines
EN 415-4-1997+AC-2002 包装机械安全 第4部分:货盘装载器和货盘卸载器 Safety of packaging machines - Part 4: Palletisers and depalletisers
EN 60264-1-1994 绕组线的包装 第1部分:圆绕组线容器 Packaging of winding wires - Part 1: Containers for round winding wires (IEC 60264-1:1968)
EN 60264-2-1-1994 绕组线的包装 第2部分:圆柱形筒装交货线盘 第1节:基本尺寸 Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 1: Basic dimensions (IEC 60264-2-1:1989)
EN 60264-2-2-1994 绕组线的包装 第2部分:圆柱形筒装交货线盘 第2节:热塑性材料可回收线盘规范 Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 2: Specification for returnable spools made from thermoplastic material (IEC 60264-2-2:1990)
EN 60264-2-2/prA1-2003 绕组线的包装 第2部分:圆柱形筒装交货线盘 第2节:热塑性材料可回收线盘规范 修改prA1 Amendment 1 to IEC 60264-2-2: Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools; Specification for returnable spools made from thermoplastic material
EN 60264-2-3-1994 绕组线的包装 第2部分:圆柱形筒装交货线盘 第3节:热塑性材料不可回收线盘规范 Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-2-3:1990)
EN 60264-2-3/prA1-2003 绕组线的包装 第2部分:圆柱形筒装交货线盘 第3节:热塑性材料不可回收线盘规范 修改prA1 Amendment 1 to IEC 60264-2-3: Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material
EN 60264-3-1-2000 绕组线的包装 第3-1部分:圆锥形筒装交货线盘 基本尺寸 Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions (IEC 60264-3-1:1999)
EN 60264-3-2-1999 绕组线的包装 第3-2部分:圆锥形筒装交货线盘 热塑性材料可回收线盘规范 Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999)
EN 60264-3-3-1994 绕组线的包装 第3部分:圆锥形筒装交货线盘 第3节:热塑性材料不可回收线盘规范 Packaging of winding wires - Part 3: Taper barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-3-3:1990)
EN 60264-3-3/prA1-2003 绕组线的包装 第3部分:圆锥形筒装交货线盘 第3节:热塑性材料不可回收线盘规范 修改prA1 Amendment 1 to IEC 60264-3-3: Packaging of winding wires - Part 3-3: Taper barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material
EN 60264-3-4-1999 绕组线的包装 第3-4部分:圆锥形筒装交货线盘 圆锥形筒装交货线盘容器的基本尺寸 Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999)
EN 60264-3-5-1999 绕组线的包装 第3-5部分:圆锥形筒装交货线盘 热塑性材料线盘线筒规范 Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999)
EN 60264-4-1-1994 绕组线的包装 第4-1部分:试验方法 热塑性材料交货线盘 Packaging of winding wires - Part 4: Methods of test - Section 1: Delivery spools made from thermoplastic material (IEC 60264-4-1:1989)
EN 60264-4-1/prA1-1997 绕组线的包装 第4-1部分:试验方法 热塑性材料交货线盘 修改prA1 Amendment to IEC 60264-4-1: Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials
EN 60264-4-2-1994 绕组线的包装 第4-2部分:试验方法 热塑性材料锥形筒装交货线盘容器  Packaging of windig wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992)
EN 60264-4-2/prA1-2003 绕组线的包装 第4-2部分:试验方法 热塑性材料锥形筒装交货线盘容器 修改prA1 Amendment 1 to IEC 60264-4-2: Packaging of winding wires - Part 4-2: Methods of test; Containers made from thermoplastic material for taper barrelled delivery spools
EN 60264-5-1-1997 绕组线的包装 第5-1部分:带圆锥形侧板的圆柱形筒装交货线盘 基本尺寸 Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997)
EN 60264-5-2-2001 绕组线的包装 第5-2部分:带圆锥形侧板的圆柱形筒装交货线盘热塑材料制可回收线盘规范 Packaging of winding wires - Part 5-2: Cylindrical barelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material (IEC 60264-5-2:2001)
EN 60286-1-1998 自动装配用元件的包装 第1部分:具有轴向引线的元件在连续编带上的带式包装  Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:1997)
EN 60286-2-1998+A1-2003 自动装配用元件的包装 第2部分:具有单向引线的元件在连续编带上的带式包装  Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (IEC 60286-2:1997)
EN 60286-3-1998 自动装配用元件的包装 第3部分:表面安装的元件在连续编带上的包装 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:1997)
EN 60286-4-1998 自动装配用元件的包装 第4部分:封装在E和G型包装件中的电子元件用的粘着料斗 Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G (IEC 60286-4:1997)
EN 60286-5-1997 自动装配用元件的包装 第5部分:矩阵式料盘 Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:1995, modified)
EN 60286-6-1998 自动装配用元件的包装 第6部分:表面安装组件的散装盒包装 Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:1998)
EN 61834-4-1998 录制 用户用6.35mm磁带(525-60、625-50、1125-60和1250-50系统)的螺旋扫描数字视频盒式录像系统 第4部分 Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents (IEC 61834-4:1998)
EN 62090-2003 使用条码和二维符号表示的电子元件的产品包装标签 Product package labels for electronic components using bar code and two-dimensional symbologies (IEC 62090:2002)
EN 62148-1-2002 光纤有源元件和器件 包装和接口标准 第1部分:总则和指南 Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance (IEC 62148-1:2002)
EN 62148-10-2003 光纤有源元件和器件 包装和接口标准 第10部分: SFF MU双向20针式收发机 Fibre optic active components and devices - Package and interface standards - Part 10: SFF MU duplex 20-pin transceivers (IEC 62148-10:2003) / Note: Endorsement notice
EN 62148-2-2003 光纤有源元件和器件 包装和接口标准 第2部分: SFF MT-RJ 10针式收发机 Fibre optic active components and devices - Package and interface standards - Part 2: SFF MT-RJ 10-pin transceivers (IEC 62148-2:2003) / Note: Endorsement notice
EN 62148-3-2003 光纤有源元件和器件 包装和接口标准 第3部分:SFF MT-RJ 20针式收发机 Fibre optic active components and devices - Package and interface standards - Part 3: SFF MT-RJ 20-pin transceivers (IEC 62148-3:2003) / Note: Endorsement notice
EN 62148-4-2003 光纤有源元件和器件 包装和接口标准 第4部分:PN 1X 9 塑料光纤收发机 Fibre optic active components and devices - Package and interface standards - Part 4: PN 1*9 plastic optical fibre transceivers (IEC 62148-4:2003) / Note: Endorsement notice
EN 62148-5-2003 光纤有源元件和器件 包装和接口标准 第5部分:SC 1X 9 光纤组件 Fibre optic active components and devices - Package and interface standards - Part 5: SC 1*9 fibre optic modules (IEC 62148-5:2003) / Note: Endorsement notice
EN 62148-7-2003 光纤有源元件和器件 包装和接口标准 第7部分: SFF LC 10针式收发机 Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers (IEC 62148-7:2003) / Note: Endorsement notice
EN 62148-8-2003 光纤有源元件和器件 包装和接口标准 第8部分: SFF LC 20针式收发机 Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC 20-pin transceivers (IEC 62148-8:2003) / Note: Endorsement notice
EN 62148-9-2003 光纤有源元件和器件 包装和接口标准 第9部分: SFF MU 10针式收发机 Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers (IEC 62148-9:2003) / Note: Endorsement notice
EN 76-1978 某些预包装食品的包装 玻璃和金属容器的容量 Packages for certain prepacked foodstuffs; capacities of glass and metal containers
EN 829-1996 玻璃试管内的诊断系统 医学和生物试样的传送包装 要求、试验 In vitro diagnostic systems - Transport packages for medical and biological specimens - Requirements, tests
EN 862-2001 包装 防儿童拆开的包装 非药物产品用不能再封包的包装的要求和试验程序/注:不包括2001年9月的修改通知 Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products / Note: Includes Correction Notice of September 2001
EN 868-1-1997 经消毒的医疗器械用包装材料和系统 第1部分:一般要求和试验方法 Packaging materials and systems for medical devices which are to be sterilized - Part 1: General requirements and test methods
EN 868-10-2000 经消毒的医疗器械用包装材料和系统 第10部分:生产热密封袋、卷轴和盖的聚烯烃粘性涂层非编织材料 要求和 Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
EN 868-2-1999 经消毒的医疗器械用包装材料和系统 第2部分:消毒包裹物 要求和试验方法 Packaging materials and systems for medical devices which are to be sterilized - Part 2: Sterilization wrap - Requirements and test methods
EN 868-3-1999 经消毒的医疗器械用包装材料和系统 第3部分:生产纸袋(EN 868-4规定)和生产盒和卷筒用纸(EN 868-5规定 Packaging materials and systems for medical devices which are to be sterilized - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
EN 868-4-1999 经消毒的医疗器械用包装材料和系统 第4部分:纸袋 要求和试验方法 Packaging materials and systems for medical devices which are to be sterilized - Part 4: Paper bags - Requirements and test methods
EN 868-5-1999+AC-2001 经消毒的医疗器械用包装材料和系统 第5部分:纸、塑料薄膜结构的热和可自密封袋及卷轴 要求和试验方法 Packaging materials and systems for medical devices which are to be sterilized - Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
EN 868-6-1999 经消毒的医疗器械用包装材料和系统 第6部分:生产经氧化乙烯或辐照消毒的医用包所用的纸 要求和试验方法 Packaging materials and systems for medical devices which are to be sterilized - Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods
EN 868-7-1999 经消毒的医疗器械用包装材料和系统 第7部分:生产经氧化乙烯或辐射消毒的医用热密封包所用的粘性涂覆纸 Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods
EN 868-8-1999 经消毒的医疗器械用包装材料和系统 第8部分:符合EN 285的蒸汽消毒器用可重复使用的消毒容器 要求和试验 Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
EN 868-9-2000 经消毒的医疗器械用包装材料和系统 第9部分:生产热密封袋、卷轴和盖的聚烯烃非涂层非编织材料 要求和试 Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
EN ISO 10303-210-2002 工业自动化系统和集成 产品数据表示和交换 第210部分:应用协议:电子配件、互连和包装设备 Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001)
EN ISO 11683-1997 包装 触摸危险标志 要求 Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997)
EN ISO 11897-2001 包装 热塑柔性薄膜袋 折边处的撕裂扩展试验 Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999)
EN ISO 12048-2000 包装 满装的运输包装 使用压力试验机的压力试验和堆积试验 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)
EN ISO 13355-2003 包装 满装运输包装和单件货物 垂直随机振动试验  Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001)
EN ISO 16104-2003 包装 危险货物的运输包装 试验方法 Packaging - Transport packaging for dangerous goods - Test methods (ISO 16104:2003)
EN ISO 16467-2003 包装 危险货物的运输包装 中型散装货物容器(IBCs)的试验方法 Packaging - Transport packaging for dangerous goods - Test methods for IBCs (ISO 16467:2003)
EN ISO 2062-1995 纺织品 从包装抽取纱线 单端断裂力和断裂伸长的测定 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993)
EN ISO 2233-2001 包装 满装的运输包装和单元货物 试验条件 Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000)
EN ISO 2234-2002 包装 满装运输包装和单件货物 静载荷法堆积试验 Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000)
EN ISO 2244-2002 包装 满装运输包装和单件货物 水平冲击试验 Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000)
EN ISO 2247-2002 包装 满装运输包装和单件货物 固定低频振动试验 Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000)
EN ISO 2873-2002 包装 满装运输包装和单件货物 低压试验 Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000)
EN ISO 2875-2002 包装 满装运输包装和单件货物 喷水试验 Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000)
EN ISO 7711-1-1998 牙科旋转器械 金刚钻器械 第1部分:尺寸、要求、标记和包装 Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997)
EN ISO 780-1999 包装 货物搬运的图形标志 Packaging - Pictorial marking for handling of goods (ISO 780:1997)
EN ISO 8318-2002 包装 满装的运输包装和单元货物 用振动频率作正弦振动试验 Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000)
EN ISO 8351-1-1996 包装 袋的分类方法 第1部分:纸袋 Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)
EN ISO 8351-2-1996 包装 袋的分类方法 第2部分:热塑柔性薄膜袋 Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994)
EN ISO 8367-1-1996 包装 一般用途包装袋的尺寸公差 第1部分:纸袋 Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)
EN ISO 8367-2-1996 包装 一般用途包装袋的尺寸公差 第2部分:热塑柔性薄膜袋 Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
prEN 12064-1996 木板 包装用实心和波纹纤维板规范 Board - Specification of solid and corrugated fibreboard for packaging purposes
prEN 14287-2001 铝及铝合金 制造包装及包装部件用铝材化学成分的特殊要求 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
prEN 14375-2003 医药产品防止儿童打开的包装 试验和要求 Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
prEN 14391-2002 包装 可活动铝管 危险感觉警告 Packaging - Collapsible aluminium tubes - Tactile warnings of danger
prEN 14477-2002 包装 柔性包装材料 刺破力的测定 试验方法 Packaging - Flexible packaging material - Determination of puncture resistance; Test methods
prEN 14479-2002 包装 柔性包装材料用动态液上气相色谱法测定残余溶剂 绝对法 Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography; Absolute method
prEN 1732-1-1997 包装 尺寸配合 第1部分:原则 Packaging - Dimensional coordination - Part 1: Principles
prEN 1732-2-1997 包装 尺寸配合 第2部分:术语 Packaging - Dimensional coordination - Part 2: Terminology
prEN 1732-3-1997 包装 尺寸配合 第3部分:规则和尺寸 Packaging - Dimensional coordination - Part 3: Rules and dimensions
prEN 23-1-1989 洗涤粉和清洁粉的包装 纤维板硬纸盒和圆筒的尺寸和体积 Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board
prEN 365-2002 预防高空坠落的人身保护设备和其它保护设备 使用、维护、定期检查、修理、标志和包装的一般要求 Personal protective equipment and other equipment for protection against falls from a height - General requirements for instructions for use, maintenance, periodical examination, repair, marking and packaging
prEN 60191-6-11-2002 半导体器件的机械标准化 第6-11部分:矩形小间距球状排列(FBGA)的包装设计指南 Mechanical standardization of semiconductor devices - Part 6-11: General design guidelines for rectangular Fine Pitch Ball Grid Array Packages (FBGA)
prEN 60264-4-1-1997 绕组线的包装 第4-1部分:试验方法 热塑性材料交货线盘 ()
prEN 60286-6-2003 自动装配用元件的包装 第6部分:表面安装组件的散装盒包装 IEC 60286-6: Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
prEN 6049-006-2001 航空航天系列 设备电缆 偏聚酸胺纤维保护套 第006部分:自动包装保护套 易弯曲接线端装置 产品标准  Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard
prEN 62137-2002 环境和耐久试验 安装条件下FBGA、BGA、FLGA、LGA、SON和QFN包装的环境和耐久试验方法 IEC 62137, Ed. 1: Environmental and endurance testing - Environmental and endurance test methods for FBGA, BGA, FLGA, LGA, SON and QFN package on mounting condition
prEN 62149-3-4-2000 包括混合器件的光纤通信分立/集成光电子半导体器件的基础标准 第3-4部分:包装接口标准 SC-SIP 9针光纤终 Basic standards for discrete/integrated optoelectronic semiconductor devices for fibre optic communications including hybrid devices - Part 3-4: Package interface standards; Interface standard for SC-SIP 9 pin fibre optic terminal device
prEN 76-1988 某些预包装食品的包装 玻璃和金属容器的容量 Packages for certain pre-packed foodstuffs; capacities of glass and metal containers
prEN ISO 16101-1999 包装 危险货物的运输包装 塑料紧密性试验 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO/DIS 16101:1999)
编号 中文名称 英文名称

返回