5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




欧洲垃圾和污水处理标准(EN)翻译目录查询

ASME | BS | DIN | EN | GB | ISO | JIS | NF | 
返回

编号中文名称英文名称
EN ISO 5667-13-1997水质 采样 第13部分:生活污水和水处理厂污水采样指南Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997)
EN 1055-1996塑料管道系统 建筑物内粪便和污水排放用热塑管道系统 抗周期性升温的试验方法Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
EN 1054-1995塑料管道系统 粪便和污水排放用热塑管道系统 连接件气密性试验方法Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
EN 1401-1-1998非压力地下雨水管和污水管用塑料管道系统未增塑聚氯乙烯(PVC-U) 管道 第1部分:配件和系统规范Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
ENV 1046-2001塑料管道和导管系统 运输水或污水用建筑结构外系统 地上和地下安装用规程Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground
ENV 1451-2-2001建筑物结构内污物和污水排出(低和高温)用塑料管道系统 聚丙烯(PP ) 第2部分:合格评定指南Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
ENV 1519-2-2001建筑物结构内污物和污水排放(低和高温)塑料管道系统 聚已烯(PE) 第2部分:合格评定指南Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
ENV 1852-2-2000无压地下排水和污水用塑料管道系统 聚丙烯(PP) 第2部分:合格评定指南Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
EN 1636-5-1997无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第5部分:针对接头Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints
EN 598-1994污水工程用球墨铸铁管、配件、附件和其它接头 要求和试验方法Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods
EN 1636-3-1997无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第3部分:管件Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings
EN 588-1-1996污水管和排水管用纤维水泥管 第1部分:重力系统用管道、管连接件和管配件Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems
EN 1989-2000热塑性管道系统 埋地无压污水用接头 通过估计密封压力对热塑弹性塑料(TPE)密封接头的长时间密封性能的试Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
prEN 14457-2002专门为无沟排放污水设备而设计的部件的一般要求General requirements for components specifically designed for use in trenchless construction of drains and sewers
prEN 13566-2-2002用于修复非压力排水和污水网的塑料管道系统 第2部分:带连续管的衬套Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes
prEN 1519-5-1994建筑物结构内污物和污水排放(低和高温)塑料管道系统.聚已烯(PE) 第5部分:针对系统用途的适合性Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
prEN ISO 15749-2-2001船舶和造船技术 船和海上构筑物上排水系统 第2部分:生活污水排水、排水管道的自流系统Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system (ISO/DIS 15749-2:2001)
prEN ISO 15749-1-2001船舶和造船技术 船和海上构筑物上排水系统 第1部分:生活污水排水系统的设计Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design (ISO/DIS 15749-1:2001)
prEN 1852-5-1995无压地下排水和污水用塑料管道系统 聚炳烯(PP) 第5部分:对系统配合的适宜性Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 5: Fitness for purpose of the system
ENV 13801-2000建筑物中用于粪便和污水排放(低温和高温)的塑料管道系统 热塑性塑料 推荐的安装规范Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
EN 773-1999液压排放管、排水管和污水管构件的一般要求General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
EN 12889-2000排水管和污水管非开槽结构和测试Trenchless construction and testing of drains and sewers
EN 588-2-2001污水管和排水管用纤维水泥管 第2部分:检修孔和检查室Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers
EN 13380-2001建筑物外排水和污水系统组件的清理和修复的一般要求General requirements for components used for renovation and repair of drain and sewer systems outside buildings
prEN 1519-3-1994建筑物结构内污物和污水排放(低和高温)塑料管道系统 聚已烯(PE) 第3部分:管件Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 3: Fittings
EN 1636-6-1997无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第6部分:安装实践Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 6: Practices for installation
prEN 1636-2-1996无压力排水道和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第2部分:带有挠Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints
prEN 1636-1-1996无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第1部分:总则Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General
prEN 1636-4-1994无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第4部分:辅助设备Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 4: Ancillary equipment
prEN 1451-3-1994建筑物结构内用于污物和污水排放(高/低温)的塑料管道系统 聚丙烯(PP) 第3部分:管件Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 3: Fittings
prEN 1455-3-1994建筑物结构内用于污物和污水排放(高/低温)的塑料管道系统 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第3部分Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 3: Fittings
prEN ISO 15749-4-2001船舶和造船技术 船和海上构筑物上排水系统 第4部分:生活污水排水、污物处理排出管道Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO/DIS 15749-4:2001)
prEN ISO 15749-3-2001船舶和造船技术 船和海上构筑物上排水系统 第3部分:生活污水排水、排水管的真空抽吸系统Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO/DIS 15749-3:2001)
prEN 1451-6-1994建筑物结构内用于污物和污水排放(高/低温)的塑料管道系统 聚丙烯(PP) 第6部分:推荐的安装实践Plastics piping systems for soil and waste discharge (low and high temperature) within the building - Polypropylene (PP) - Part 6: Recommended practice for installation
prEN 1519-6-1995建筑物结构内污物和污水排放(低和高温)塑料管道系统 聚已烯(PE) 第6部分:推荐的安装实践Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 6: Recommanded practice for installation
prEN 1455-5-1994建筑物结构内用于污物和污水排放(高/低温)的塑料管到系统 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第5部分Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 5: Fitness for purpose of the system
prEN 1455-6-1994建筑物结构内用于污物和污水排放(高/低温)的塑料管道系统 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第6部分Plastics piping systems for soil and waste discharge (low and high temperature) within the building - Acrylonitrile-butadiene-styrene (ABS) - Part 6: Recommended practice for installation
prEN 1566-5-1994建筑物结构内污物和污水排放(低和高温)用塑料管道系统 氯化已烯(聚氯已烯)(PVC-C) 第5部分:针对系统用途Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system
EN 1437-2002塑料管道系统 地下排水和污水用管道系统 耐温度循环和外部负荷综合作用的试验方法Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
EN 13244-1-2002地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第1部分:总则Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
EN 13244-2-2002地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第2部分:管道Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes
EN 13244-4-2002地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第4部分:阀门Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves
EN 13244-5-2002地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第5部分:系统适用度Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 13244-3-2002地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第3部分:配件Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings
EN 13566-1-2002用于修复非压力排水和污水网的塑料管道系统 第1部分:总则Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
EN 13566-3-2002用于修复非压力排水和污水网的塑料管道系统 第3部分:带密装配管的衬套Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
EN 13566-4-2002用于修复非压力排水和污水网的塑料管道系统 第4部分:带现场固化管的衬套Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
EN 1852-1-1997+A1-2001无压地下排水和污水用塑料管道系统 聚丙烯(PP)、 第一部分:管材、管件及系统规范Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
EN 13598-1-2003非压力底下排水和污水塑料管道系统 非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE) 第1部分:包括Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
prEN 13508-1-2003建筑物外排水和污水管系统状况的确定 第1部分:一般要求Condition of drain and sewer systems outside buildings - Part 1: General requirements
prEN 13476-1-2002非压力地下排水和污水热塑性塑料管道系统 聚氯乙烯(PVC-U)、聚丙烯(PP))和聚已烯(PE)的结构墙管道系Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for pipes, fittings and the syste
EN ISO 9509-1995水质 评价化学药品和污水对活性污泥中微生物硝化抑制作用的方法Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water (ISO 9509:1989)
prEN 1451-5-1994建筑物结构内用污物和污水排放(高/低温)的塑料管道系统 聚丙烯(PP) 第5部分:系统用途的适合性Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 5: Fitness for purpose of the system
EN 1501-1-1998垃圾车及其相关提升设备 一般要求和安全要求 第1部分:后部装载的垃圾车Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles
prEN 14414-2002土工合成织物 测定垃圾掩埋应用的耐化学腐蚀用筛选试验方法Geosynthetics - Screening test method for determining chemical resistance for landfill applications
prEN 474-11-2001土方机械 安全 第11部分:土地和垃圾掩埋夯土机要求Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors
EN 474-11-1998土方机械 安全 第11部分:土地和垃圾掩埋夯土机要求Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors
prEN 1501-2-2000垃圾车及其相关提升设备 一般要求和安全要求 第2部分:边侧装载的垃圾车Refuse collection vehicles and their associated lifting device - General requirements and safety requirements - Teil 2: Side loaded refuse collection vehicles
编号中文名称英文名称

返回
程序 | 样本HTML文件