| 编号 |
中文名称 |
英文名称 |
| DIN 11832-1-1990
|
农场和牲畜饲养设备.输送液态粪肥的管道用阀门管件.第1部分:最大1巴的静压力闸阀
|
Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
|
| DIN 11860-1954
|
乳品机械.压力接头用钩形扳手
|
Dairying machines; hook spanners for compression fittings
|
| DIN 12001-1-1987
|
实验室安全标记.第1部分:压力钢瓶
|
Safety markings in laboratories; pressure cylinders
|
| DIN 1314-1977
|
压力；基本定义、单位
|
Pressure; Basic Definitions, Units
|
| DIN 14152-1-1989
|
最大工作压力为 0.5 巴 或 1巴 的浮力气垫.第1部分:要求、检验
|
Pneumatic lifting cushions for max. working pressures 0,5 or 1 bar; requirements, testing
|
| DIN 14301-1985
|
标称压力为16的D型供水和吸水用铝合金联接器
|
Aluminium alloy delivery and suction coupling type D; nominal pressure
|
| DIN 14302-1985
|
标称压力为16的C型供水铝合金联接器
|
Aluminium alloy delivery coupling type C; nominal pressure 16
|
| DIN 14303-1985
|
标称压力为16、B型供水铝合金联接器
|
Aluminium alloy delivery coupling type B; nominal pressure 16
|
| DIN 14306-1986
|
压力和抽吸用的铝合金D型刚性联轴节PN16
|
Aluminium alloy solid coupling type D for pressure and suction purposes; nominal pressure 16
|
| DIN 14307-1-1985
|
带压力用密封圈的铝合金C型刚性联接器.标称压力16
|
Aluminium alloy solid coupling type C, with sealing ring for pressure purposes; nominal pressure 16
|
| DIN 14307-2-1986
|
抽吸用C型、标称压力16带密封圈的铝合金刚性接头
|
Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16
|
| DIN 14308-1-1985
|
带压力用密封圈的铝合金B型刚性联接器.标称压力16
|
Aluminium alloy solid coupling type B, with sealing ring for pressure purposes; nominal pressure 16
|
| DIN 14308-2-1986
|
抽吸用B型、标称压力16带密封圈的铝合金刚性接头
|
Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16
|
| DIN 14309-1985
|
标称压力为16带压力吸水密封环的A型铝合金联接器
|
Aluminium alloy solid coupling type A, with sealing ring for pressure and suction purposes; nominal pressure 16
|
| DIN 14310-1986
|
压力和抽吸用的铝合金制有盖板的灭火水龙带D型联轴节：公称压力PN16
|
Aluminium alloy cap fire hose coupling typ D for pressure and suction purposes; nominal pressure 16
|
| DIN 14311-1985
|
标称压力为16抽吸和压力用铝合金消防水龙带C型管接头
|
Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16
|
| DIN 14312-1985
|
标称压力为16、压力吸水用消防软管B型铝合金联接器
|
Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16
|
| DIN 14313-1989
|
压水和抽水用铝合金制A型盲板消防联接器.公称压力 16
|
Aluminium alloy cap fire hose coupling type A for pressure and suction purposes; nominale pressure 16
|
| DIN 14317-1985
|
标称压力为16、带金属密封面和灰铸铁或铝合金盖的C型铝合金刚性联接器
|
Aluminium alloy solid coupling type C with metallic sealing area and with cast iron cover or with aluminium alloy cover, type C; nominal pressure 16
|
| DIN 14319-1985
|
铝合金带金属密封面和灰铸铁或铝合金盖的A型固定联接器.公称压力 16
|
Aluminium alloy solid coupling type A with metallic sealing area and with cast iron or with aluminium alloy cover, type A; nominal pressure 16
|
| DIN 14321-1985
|
标称压力为16、C型抽水铝合金联接器
|
Aluminium alloy suction coupling type C; nominal pressure 16
|
| DIN 14323-1985
|
标称压力为16、A型供水和抽水用铝合金联接器
|
Aluminium alloy delivery and suction coupling type A; nominal pressure 16
|
| DIN 14330-1-1985
|
S 28 消防软管用标称压力PN16 C型铝合金联轴器
|
Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 28
|
| DIN 14330-2-1985
|
S 38 消防软管用标称压力PN16 C型铝合金联轴器
|
Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 32
|
| DIN 14332-1986
|
输送管路的C型铝合联接器.公称压力16 .用于 C42 消防软管
|
Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42
|
| DIN 14341-1986
|
标称压力为16的 铝合金C-D型转接接头
|
Aluminium alloy C-D-adaptor for nominal pressure 16
|
| DIN 14342-1986
|
标称压力为16的 铝合金B-C型转接接头
|
Aluminium alloy B-C-adaptor for nominal pressure 16
|
| DIN 14343-1986
|
标称压力为16 的铝合金A-B型转接接头
|
Aluminium alloy A-B-adaptor for nominal pressure 16
|
| DIN 14345-1978
|
标称压力16的三头分配器
|
Triple head distributor, nominal pressure 16
|
| DIN 14368-1985
|
标称压力为16的支管管座
|
Branchpipe-holder for nominal pressure 16
|
| DIN 14375-1-1979
|
标称压力PN16、双排气口、竖储水管
|
Double outlet standpipes, nominal pressure 16
|
| DIN 14380-1978
|
标称压力为16的压力限制阀
|
Pressure limitation valve, nominal pressure 16
|
| DIN 14381-1999
|
B型PN 16 自锁紧压力阀
|
Pressure valve type B PN 16, self-locking
|
| DIN 14420-2002
|
消防泵.消防离心泵.消防车在安装真空面和压力面组件后的试验要求
|
Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle
|
| DIN 14421-2001
|
消防泵用压力表(测压表)
|
Pressure gauges (manometer) for fire pumps
|
| DIN 14461-3-2006
|
消防用输送阀装置.第3部分:标定压力PN16的水龙带连接阀
|
Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
|
| DIN 16085-1995
|
电动有限接点装置的压力量规
|
Pressure gauges with electrical limit contact devices
|
| DIN 16086-2006
|
电动压力测量仪器.压力传感器、压力测量仪.数据单的概念、规范
|
Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
|
| DIN 16261-2004
|
压力表用带内螺纹/内螺纹和内螺纹/外螺纹连接的PN 16旋塞
|
PN 16 cocks with female/female and female/male connection for pressure gauges
|
| DIN 16262-2004
|
压力表用带调节螺母和轴套式连接的PN 6和PN 16旋塞
|
PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
|
| DIN 16263-2004
|
压力表用带调节螺母、轴套式连接和试验连接的PN 16旋塞
|
PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
|
| DIN 16270-2004
|
压力表用不带试验连接的PN 250和PN 400阀门
|
PN 250 and PN 400 valves without test connection for pressure gauges
|
| DIN 16271-2004
|
压力表用带试验连接的PN 250和PN 400阀门
|
PN 250 and PN 400 valves with test connection for pressure gauges
|
| DIN 16272-2004
|
压力表用带关闭试验连接的PN 250和PN 400阀门
|
PN 250 and PN 400 valves with shut-off test connection for pressure gauges
|
| DIN 16282-2004
|
压力表及其附件用弯管
|
Siphons for pressure gauges and their accessories
|
| DIN 16283-2004
|
压力表及其附件用调整螺母
|
Adjusting nuts for pressure gauges and their accessories
|
| DIN 16284-2004
|
压力表及其附件用螺纹接套连接
|
Nipple connections for pressure gauges and their accessories
|
| DIN 16287-2004
|
压力表用阀门和旋塞的试验连接用盖
|
Caps for test connection on valves and cocks for pressure gauges
|
| DIN 16450-1994
|
未增朔聚氯乙烯压力管道的套管接头.符号
|
Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols
|
| DIN 16831-1-2003
|
聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第1部分:承插焊接用注模肘管尺寸
|
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 1: Dimensions of injection-moulded elbows for socket welding
|
| DIN 16831-2-2003
|
聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第2部分:承插焊接用注模三通管尺寸
|
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 2: Dimensios of injection-moulded tees for socket welding
|
| DIN 16831-3-2003
|
聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第3部分:承插焊接用注模套管和帽.尺寸
|
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 3: Dimensions of injection-moulded sockets and caps for socket welding
|
| DIN 16831-4-2003
|
聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第4部分:承插焊接用注模异径管尺寸
|
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 4: Dimensions of injection-moulded reducers for socket welding
|
| DIN 16831-5-1999
|
聚丁烯(PB)制压力管道用管连接件和零件.PB125.第5部分:一般质量要求、试验
|
Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 - Part 5: General quality requirements, testing
|
| DIN 16831-6-2003
|
聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第6部分:耐焊接配件尺寸
|
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 6: Dimensions of fittings for resistance welding
|
| DIN 16831-7-2004
|
聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第7部分:承插焊接用套管、法兰和密封环组件的尺寸
|
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and selaing elements for socket welding
|
| DIN 1687-4-1986
|
重型金属合金粗铸件.压力模铸件.第4部分:一般公差、加工余量
|
Heavy metal alloy raw castings; pressure die castings; general tolerances, machining allowances
|
| DIN 1688-4-1986
|
轻型金属合金粗铸件.压力模铸件.第4部分:一般公差、加工余量
|
Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances
|
| DIN 16962-1-1980
|
1型和2型聚丙烯压力管道用管接头和零组件.对焊用弓形结构弯头.尺寸
|
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions
|
| DIN 16962-10-1989
|
1型、2型和3型的聚丙烯压力管道用管道连接组件和管道配件.第10部分:对焊用喷射模塑配件尺寸
|
Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions
|
| DIN 16962-11-1980
|
1型和2型聚丙烯压力管道用管接头和零组件.用于对焊的车削和压制减径管套.尺寸
|
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
|
| DIN 16962-12-1999
|
聚丙烯(PP)制压力管道用管连接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸缘接头、法兰、密
|
Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions
|
| DIN 16962-13-1987
|
1型和2型聚丙烯压力管道用管连接件和接头.管接头.尺寸
|
Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions
|
| DIN 16962-2-1983
|
1型和2型聚丙烯压力管道用管接头组件和接头.用对焊的分段嵌入和减颈方法制造的T型管及支管.尺寸
|
Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
|
| DIN 16962-3-1980
|
1型和2型聚丙烯压力管道用管接头和零组件.对焊用管成形弯头.尺寸
|
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions
|
| DIN 16962-4-1988
|
1型和2型聚丙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸
|
Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
|
| DIN 16962-5-2000
|
聚丙烯压力管道用管连接件和零件.PP-H100,PP-B80,PP-R80.第5部分:一般质量要求.试验
|
Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 5: General quality requirements, testing
|
| DIN 16962-6-1980
|
1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑弯头.尺寸
|
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
|
| DIN 16962-7-1980
|
1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑三通.尺寸
|
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
|
| DIN 16962-8-1980
|
1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑管套和管帽.尺寸
|
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
|
| DIN 16962-9-1983
|
1型和2型聚丙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸
|
Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
|
| DIN 16963-1-1980
|
.1型和2型高密度聚乙烯压力管道用管连接件.对焊用弓形结构的管子弯头.尺寸
|
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions
|
| DIN 16963-10-1980
|
1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑套筒与帽盖.尺寸
|
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
|
| DIN 16963-11-1999
|
聚乙烯(PE)制压力管道用管连接件和零件.PE 80和PE 100.第11部分:承口焊接用凸缘接头、法兰、密封圈.尺寸
|
Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions
|
| DIN 16963-13-1980
|
1型和2型高密度聚乙烯压力管道用管子接头与零件.对焊用车削的和压制的缩径承接件.尺寸
|
Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
|
| DIN 16963-14-1983
|
1型和2型高密度聚乙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸
|
Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
|
| DIN 16963-15-1987
|
高密度聚乙烯压力管道用管连接件和接头.管接头.尺寸
|
Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions
|
| DIN 16963-2-1983
|
1型和2型高密度聚乙烯压力管道用管接头组件和配件.用对焊的分段嵌入和缩颈方法制造的T型管及支管.尺寸
|
Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
|
| DIN 16963-3-1980
|
1型和2型高密度聚乙烯压力管道用管子接头与零件.对焊用弯管.尺寸
|
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions
|
| DIN 16963-4-1988
|
高密度聚乙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸
|
Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
|
| DIN 16963-6-1989
|
高密度聚乙烯压力管用管道连接组件和管道配件.第6部分:对焊用喷射模塑配件尺寸
|
Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions
|
| DIN 16963-7-1989
|
高密度聚乙烯压力管道用管道连接组件和管道配件.第7部分:电阻焊接配件尺寸
|
Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions
|
| DIN 16963-8-1980
|
1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑弯管.尺寸
|
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
|
| DIN 16963-9-1980
|
1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑三通管件.尺寸
|
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
|
| DIN 18195-5-2000
|
建筑物的防水.第5部分:对地板和潮湿区域非压力水的防水层.设计与施工
|
Water-proofing of buildings - Part 5: Water-proofing against non-pressing water on floors and in wet areas; design and execution
|
| DIN 18218-1980
|
新浇混凝土对垂直模板的压力
|
Pressure of fresh concrete on vertical formwork
|
| DIN 18307-2006
|
建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).建筑物外压力管道工程管敷设
|
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of pressure pipework outside buildings
|
| DIN 18555-9-1999
|
含矿物粘合剂灰浆的试验.第9部分:凝固灰浆.层间接缝灰浆压力强度的测定
|
Testing of mortars containing mineral binders - Part 9: Hardened mortars; determination of the mortar compressive strength in the bed joint
|
| DIN 18855-2-2007
|
商用炊具设备.第2部分:压力烧水锅炉.要求和试验
|
Equipment for commercial kitchens - Part 2: Pressure water boilers, requirements and testing
|
| DIN 18857-3-2007
|
商用厨房设备.第3部分:可倾压力炖锅.要求和试验
|
Equipment for commercial kitchens - Part 3: Tilting pressure braising pans, requirements and testing
|
| DIN 18857-4-2007
|
大型厨房设备.第4部分:固定式压力炖锅.要求和试验
|
Equipment for commercial kitchens - Part 4: Stationary pressure braising pans, requirements and testing
|
| DIN 18863-2003
|
大型厨房设备.压力蒸气炊具.要求和试验
|
Equipment for commercial kitchens - Pressure steam cookers - Requirements and testing
|
| DIN 18889-1956
|
1个大气试验压力的装有无压力贮水锅炉的烧煤的水加热器.使用的条件、构造、质量、能力和试验
|
Coal-fired Water-heater with Storage Boiler, without Pressure for Test Pressure of 1 Atmosphere; Terms employed, Construction, Quality, Capacity and Testing
|
| DIN 19534-3-2000
|
非压力地下排水和污水排放用带环形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:质量控制和安装
|
Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation
|
| DIN 19802-1977
|
石棉水泥压力管道用铸铁专用铸件.套管头
|
Cast iron special castings for asbestos cement pressure pipelines; spigot ends
|
| DIN 19803-1977
|
石棉水泥压力管道的铸铁专用铸件.带法兰套管
|
Cast iron special castings for asbestos cement pressure pipelines; flanged spigots
|
| DIN 19804-1977
|
石棉水泥压力管道用铸铁专用铸件.锥形件
|
Cast iron special castings for asbestos cement pressure pipelines; tapers
|
| DIN 19805-1977
|
石棉水泥压力管道用铸铁的专用铸件.弯管头
|
Cast iron special castings for asbestos cement pressure pipe lines; bends
|
| DIN 19806-1977
|
石棉水泥压力管道专用铸铁铸件.支管
|
Cast iron special castings for asbestos cement pressure pipelines; branches
|
| DIN 19807-1977
|
石棉水泥压力管道的专用铁铸件.铸铁管的连接件
|
Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes
|
| DIN 19808-1977
|
石棉水泥压力管道用铸铁专用铸件.管堵
|
Cast iron special castings for asbestos cement pressure pipelines; plugs
|
| DIN 20002-1-1989
|
矿山管道.带活动法兰和平凸缘的钢管.标称压力10
|
Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 10
|
| DIN 20002-2-1989
|
矿山管道.带活动法兰和凸缘的钢管.标称压力6
|
Pipelines for mining; steel tubes with loose flanges and collars; projection and recess; nominal pressure 6
|
| DIN 20002-3-1989
|
矿山用管道.带活动法兰和平凸缘的钢管.标称压力40
|
Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 40
|
| DIN 20003-1-1987
|
矿山用钢管.带活套法兰和普通套环的配件.第1部分:公称压力 10
|
Steel tubes for mining; fittings with loose flanges and plain collars; nominal pressure 10
|
| DIN 20003-2-1987
|
矿山用钢管.带活套法兰和普通套环的配件.第2部分:公称压力 6
|
Steel tubes for mining; fittings with loose flanges and plain collars, projection and recess; nominal pressure 6
|
| DIN 20003-3-1987
|
矿山用钢管.带活套法兰和普通套环的配件.第3部分:公称压力 40
|
Steel tubes for mining; fittings with loose flanges and plain collars; nominal pressure 40
|
| DIN 20004-1-2000
|
矿山用钢管.第1部分:额定压力PN10和PN40的插接环
|
Steel tubes for mining - Part 1: Interpose rings rated for PN 10 and PN 40
|
| DIN 20004-2-2000
|
矿山用钢管.第2部分:额定压力PN10和PN40的楔形环
|
Steel tubes for mining - Part 2: Wedge rings rated for PN 10 and PN 40
|
| DIN 20018-1-2003
|
织物增强软管.第1部分:最大工作压力PN 10/16
|
Textile-reinforced hoses - Part 1: Maximal working pressure PN 10/16
|
| DIN 20018-2-2003
|
织物增强软管.第2部分:最大工作压力PN 40
|
Textile-reinforced hoses - Part 2: Maximal working pressure PN 40
|
| DIN 20018-3-2003
|
织物增强软管.第3部分:最大工作压力PN 100
|
Textile-reinforced hoses - Part 3: Maximal working pressure PN 100
|
| DIN 20035-1990
|
软管管接头.法兰管嘴.公称压力16
|
Hose fittings; flange nozzle; nominal pressure 16
|
| DIN 20040-1990
|
软管管接头.连接套管阀.公称压力16
|
Hose fittings; nipple valves; nominal pressure 16
|
| DIN 20042-2001
|
标称压力40的水阀.尺寸和要求
|
Watervalve, nominal pressure 40 - Dimensions and requirements
|
| DIN 2098-1-1968
|
圆线材制螺旋弹簧.线材直径0.5MM以上的冷卷压力弹簧的尺寸
|
Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards
|
| DIN 2098-2-1970
|
圆线材制螺旋弹簧.线材直径0.5MM以下的冷卷压力弹簧的尺寸
|
Helical Springs Made of Round Wire; Dimensions for Cold-coiled compression springs of less than 0.5 mm Wire Diameter
|
| DIN 21557-1987
|
矿井支承.动力支承的压力极限阀.标识代码
|
Mine support; yield valves for powered support; identification code
|
| DIN 21639-1999
|
动力辅助作动的空气门.行车道空气锁.压力门
|
Power assisted air gates - Travel-way air locks - Type doors with pressure
|
| DIN 2271-2-1976
|
气动长度测量（气动量仪）.高压力范围用仪器的结构特点
|
Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range
|
| DIN 2353-1998
|
带环套的非焊接压力连接接头.完全压连接和概述
|
Non-soldering compression fittings with cutting ring - Complete fittings and survey
|
| DIN 24312-1985
|
液压系统和元件.压力、量值、术语
|
Fluid power systems and components; pressure; quantities, terms
|
| DIN 2442-1963
|
规定质量标称压力1至100的适合螺纹连接的钢管
|
Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to 100
|
| DIN 2445-1-2000
|
承受动态载荷的无缝钢管.第1部分:流体系统用压力为100至500巴的热轧管
|
Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar
|
| DIN 2445-2-2000
|
承受动态载荷的无缝钢管.第2部分:流体系统用压力为100至500巴的精密钢管
|
Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar
|
| DIN 24540-1-1986
|
有色金属及其工具用棒材和管材压力机.第1部分:总则
|
Rod and tube-presses for non-ferrous metals and their tools; generalities
|
| DIN 24550-1-2006
|
液压技术.液压过滤器.第1部分:定义、额定压力、额定尺寸、连接尺寸
|
Fluid power - Hydraulic filters - Part 1: Definitions, nominal pressures, nominal sizes, fitting dimensions
|
| DIN 2470-1-1987
|
允许工作压力16巴以下的气体输送用钢管道.管道和配件
|
Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings
|
| DIN 25436-1980
|
用绝对压力法检验安全壳累积泄漏率
|
Integral leakage rate test of containment with the absolute pressure method
|
| DIN 2605-1-1991
|
对焊钢管配件.第1部分:压力减缩系数弯头和弯管
|
Steel butt-welding pipe fittings; elbows and bends with reduced pressure factor
|
| DIN 2615-1-1992
|
对焊钢制管件.带有换算压力系数的丁字管接
|
Steel butt-welding pipes fittings; tees with reduced pressure factor
|
| DIN 2615-2-1992
|
对焊钢制管件.在全工作压力下使用的丁字管接
|
Steel butt-welding pipe fittings; tees for use at full service pressure
|
| DIN 2616-1-1991
|
对焊钢管配件.第1部分:压力减缩系数的偏心减压器
|
Steel butt-welding pipe fittings; eccentric reducers with reduced pressure factor
|
| DIN 2616-2-1991
|
对焊钢管配件.第2部分:满工作压力条件下使用的减压器
|
Steel butt-welding pipe fittings; reducers for use at full service pressure
|
| DIN 27201-5-2006
|
铁路车辆的状况.基本原理和产品技术.第5部分:铁路车辆的车轮压力和垂直车轮副压力的检查
|
State of railway vehicles - Basic principles and production technology - Part 5: Checking of wheel forces and vertical wheelset forces of railway vehicles
|
| DIN 28018-2006
|
玻璃纤维衬钢的压力容器.设备用0.063-10立方米的生产设备用容器
|
Pressure vessels, glass lined steel - Vessels for production plants 0,063 m<(hoch)3> up to 10 m<(hoch)3>
|
| DIN 28019-2006
|
玻璃纤维衬钢的压力容器.12.5-125立方米的储存用容器
|
Pressure vessels, glass lined steel - Vessels for storage 12,5 m<(hoch)3> up to 125 m<(hoch)3>
|
| DIN 28020-2007
|
0.63立方米至25立方米卧式压力容器.尺寸
|
Horizontal pressure vessels 0,63 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions
|
| DIN 28021-2006
|
立式压力容器.6.3-100立方米贮存用容器.尺寸
|
Vertical pressure vessels - Vessels for storage, 6,3 m<(hoch)3> up to 100 m<(hoch)3> - Dimensions
|
| DIN 28022-2006
|
立式压力容器.0.063-25立方米的加工设备用容器.尺寸
|
Vertical pressure vessels - Vesels for process plants 0,063 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions
|
| DIN 28032-2005
|
非合金钢制压力容器和加工装置用焊接法兰
|
Non-alloy steel weld flanges for pressure vessels and process apparatus
|
| DIN 28034-2005
|
非合金钢制压力容器和加工装置用焊颈法兰
|
Non-alloy steel weld-neck flanges for pressure vessels and process apparatus
|
| DIN 28036-2005
|
不锈钢制压力容器和加工装置用焊接法兰
|
Weld flanges for pressure vessels and process apparatus of stainless steel
|
| DIN 28038-2003
|
不锈钢制压力容器和加工装置用带圆柱形毂焊接法兰
|
Weld flanges with cylindrical hub for pressure vessels and process apparatus of stainless steel
|
| DIN 28050-1986
|
设备和容器.容许工作压力-0.2巴至0.1巴.交货技术条件
|
Equipment and vessels; allowable working pressure -0,2 bar to 0,1 bar; technical delivery conditions
|
| DIN 28124-1-1992
|
非合金钢和不锈钢制非压力容器和工艺装置用人孔盖
|
Manhole closures for unpressurized vessels and process apparatus of nonalloy and stainless steel
|
| DIN 28124-2-1992
|
非合金钢制压力容器用人孔盖
|
Manhole closures for pressure vessels of non-alloy steel
|
| DIN 28124-3-1992
|
不锈钢制压力容器用人孔盖
|
Manhole closures for pressure vessels of stainless steel
|
| DIN 28150-1992
|
搪瓷的对焊法兰的组合搭接法兰.公称压力（PN）10
|
Divided lapped flange for glass lined welding necks; PN 10
|
| DIN 28416-1976
|
真空技术.10(-3)至10(-7)mbar范围内真空计的校准.一般方法:通过连续不断的流动降低压力
|
Vaccum technology; calibration of vacuum gauges within the range of 10<(hoch)-3> to 10<(hoch)-7> mbar, general method: pressure reduction by continuous flow
|
| DIN 28417-1976
|
真空技术.在恒定压力下用容积法测量抽气量
|
Vacuum technology; measurement of throughput by the volumetric method at constant pressure
|
| DIN 3159-1965
|
标称压力25以下的制冷设备接头法兰的安装尺寸
|
Assembling dimensions of flanges for fittings for refrigerating installations up to nominal pressure 25
|
| DIN 3160-1974
|
公称压力25巴的冷冻电路的直通截止阀
|
Through-valves for refrigerant circuits, nominal pressure 25 bar
|
| DIN 3161-1974
|
公称压力25巴的冷冻电路的弯管阀
|
Elbow valves for refrigerant circuits; nominal pressure 25 bar
|
| DIN 3162-1974
|
公称压力25巴的冷冻电路的阀门的螺纹盖板
|
Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar
|
| DIN 3163-1974
|
公称压力25巴的冷冻电路的控制直通阀
|
Control through valves for refrigerant circuits, nominal pressure 25 bar
|
| DIN 3171-1-2000
|
呼吸装置.压缩空气和压缩氧气用压缩气瓶.第1部分:试验压力为300巴和450巴的无缝钢瓶.
|
Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 1: Seamless steel cylinders, for 300 bar and 450 bar test pressure
|
| DIN 3171-2-2000
|
呼吸装置.压缩空气和压缩氧气用压缩气瓶.第2部分:试验压力为300巴和450巴的复合结构瓶.
|
Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 2: Composite cylinders for 300 bar and 450 bar test pressure
|
| DIN 32503-1979
|
用于焊接、切割和相关工艺的外壳直径为63mm的压力测量仪( 压力表)的保护罩.
|
Protective caps for pressure gauges with case diameter 63 mm used in welding, cutting and allied processes
|
| DIN 3280-1988
|
家用供水管道的阀门.公称压力 PN 10 以下的锥形连接管.概述
|
Valves for domestic water supply; tapered unions up to PN 10; survey
|
| DIN 3281-1988
|
家用供水管道的阀门.公称压力10的锥形管子接头.概述
|
Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
|
| DIN 3283-1988
|
家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带内螺纹的废水排放连接管
|
Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
|
| DIN 3284-1988
|
家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带外螺纹的连接管
|
Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
|
| DIN 3285-1988
|
家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.软管连接管
|
Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
|
| DIN 3287-1988
|
家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.管路用带螺纹的连接管
|
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
|
| DIN 3289-1988
|
家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的锥形管子接头
|
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
|
| DIN 3291-1988
|
家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的软管连接管
|
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
|
| DIN 32935-1987
|
家庭运动器械.可移动的进行拉伸和压力训练的器械.安全性要求和试验
|
Home sports equipment; mobile tension and pression training equipment, safety requirements, testing
|
| DIN 3334-1968
|
带法兰接头的加热装置用混合阀.标称压力为6、最高温度110 ℃的三通混合阀、四通混合阀.安装尺寸
|
Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions
|
| DIN 3335-1968
|
加热装置的带螺丝端部的混合阀.三通混合阀.四通混合阀.公称压力6.使用温度110 ℃.安装尺寸
|
Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
|
| DIN 3336-1968
|
带焊接弯管端的加热装置的混合阀.公称压力6、最大使用温度110 ℃的三通混合阀、四通混合阀.安装尺寸
|
Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
|
| DIN 3394-1-2004
|
自动控制阀.第1部分:压力为4巴到16巴的减压安全和调节阀
|
Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar
|
| DIN 3394-3-2004
|
自动控制阀.第3部分:压力为4巴及以下的0级减压安全阀
|
Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar
|
| DIN 3398-3-1982
|
气态物质的压力断路开关.要求和检验
|
Pressure cut-off switches for gaseous substances; requirements and testing
|
| DIN 3398-4-1986
|
第4部分:液态燃料和热载体油的压力切断开关
|
Pressure cut-off switches for liquid fuels and heat transfer oils
|
| DIN 3431-1986
|
燃气阀门.压力连接的角型球截止阀
|
Gas valves; angle pattern ball shut-off valves with compression coupling
|
| DIN 3432-1986
|
燃气阀门..压力连接的直型球截止阀
|
Gas valves; straight pattern ball shut-off valves with compression coupling
|
| DIN 3533-1981
|
煤气装置用阀门.带压力接头的角度型旋阀
|
Valves for gas installations; angle pattern stop cocks with compression fitting
|
| DIN 37082-1975
|
制动踢片的调节装置.弹簧螺栓的压力弹簧.
|
Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt
|
| DIN 38030-2001
|
有轨车辆压缩空气装置.压力量规
|
Compressed air equipment for rail vehicles - Pressure gauges
|
| DIN 3850-1998
|
压力连接管接头.概述
|
Compression fittings - Summary
|
| DIN 3859-2-1999
|
压力连接管联结器.第2部分:带符合DIN 2353DIN 和 EN ISO 8434-1 的带切断环的非焊接压力连接管联结器的组装
|
Compression couplings - Part 2: Assembly instruction for non-soldering compression couplings with cutting rings according DIN 2353 and DIN EN ISO 8434-1
|
| DIN 3866-1990
|
制冷.螺纹堵塞.额定用于40公称压力的非钎焊压紧管接头的90°扩口法兰
|
Refrigeration; threaded stem; 90° flared flanges for solderless compression couplings rated for PN 40
|
| DIN 4000-61-1992
|
压力测量仪和测量仪配件的产品特性图表
|
Tabular layouts of article characteristics for pressure gauges and their fittings
|
| DIN 4018 Bb.1-1981
|
地基.在筏基下接触压力分配的分析.说明和分析示例
|
Subsoil; analysis of contact pressure distribution under raft foundations; explanations and examples of analysis
|
| DIN 4018-1974
|
地基.扩展基础下承压力分布的计算
|
Subsoil; Calculation of the Bearing Pressure Distribution under Spread Foundations
|
| DIN 4085 Bb.2-1989
|
土壤.土地压力的计算.计算示例
|
Soil; analysis of earth-pressure; calculation examples
|
| DIN 41640-80-1988
|
机电元件的测量和试验方法.试验A.第80部分:触点压力、弹性内触点
|
Measuring methods and testing procedures for electromechanical components; test A: contact force, resilient female contacts
|
| DIN 42112-1-1986
|
印制电路板用带压力点的按钮开关.A型(12.5×12.5)mm.B型(10×10)mm.尺寸、额定值、要求、检验
|
Push-button switches with pressure point for printed boards; type A (12,5 12,5) mm; type B (10 10) mm; dimensions, ratings, requirements, tests
|
| DIN 43614-1-1979
|
压力气体管道的转换开关装置和控制装置..铜导管
|
Switchgear and controlgear conduits for pressure-gas pipelines; copper conduits
|
| DIN 43615-1976
|
开关设备.高压气体设备的额定压力和压力范围
|
Switchgear-plants; nominal pressure and pressure ranges for pressure-gas plants
|
| DIN 43686-1977
|
电气转换装置中压缩空气发生装置用压力容器
|
Pressure vessels for air generating stations in electrical switching plants
|
| DIN 43687-1976
|
电气开关厂的空气压力发生站用的立式压力容器
|
Vertical pressure tanks for air pressure generating stations in electrical switching plants
|
| DIN 43688-1976
|
电气开关设备中气压发生装置用卧式压力容器.
|
Horizontal pressure tanks for air pressure generating stations in electrical switching plants
|
| DIN 43691-1982
|
电气开关设备.压力.公式
|
Electrical switchgear; pressure; expressions
|
| DIN 44897-1-1977
|
固定式电热水器.第1部分:台置式敝口热水器用混合蓄电池的尺寸和允许的压力损耗
|
Stationary electric water heaters; dimensions and permissible pressure losses for mixing batteries for open-outlet water heaters above table
|
| DIN 45635-1603-1978
|
机器排放的空气传播噪声的测量.第1603部分:包洛面法.金属加工机床.通用压力机的特殊规定
|
Measurements of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Universal Presses
|
| DIN 46199-6-1974
|
电器开关设备.第6部分:压力和温度开关设备的接头标记
|
Electrical switchgear; terminal markings for pressure and temperature, sensitive devices
|
| DIN 4661-1-1968
|
气瓶.试验压力为30atu的焊接钢气瓶
|
Gas cylinders, welded steel gas cylinders, test pressure 30 atü
|
| DIN 4680-1-1992
|
地上液化气存储用固定式钢制压力容器.尺寸和托架
|
Stationary, above ground, steel pressure vessels for the storage of liquefied petroleum gas; dimensions and mountings
|
| DIN 4680-2-1992
|
半地上液化气存储用固定式钢制压力容器.尺寸和托架
|
Stationary, partially sunk, steel pressure vessels for the storage of liquefied petroleum gas; dimensions and mountings
|
| DIN 4681-2-1984
|
地下设备用带护套的钢制固定位置液化石油气压力容器.尺寸、设备
|
Steel fixed site pressurized LPG tanks with jacket for underground installation; dimensions, equipment
|
| DIN 4750-1993
|
保持蒸汽压力在0.5巴以下的蒸汽锅炉和加热设备中蒸汽室内竖管的要求
|
Requirements for vertical pipes for steam rooms in steamboilers and heating plants guarding against steampressure of 0,5 bar
|
| DIN 47617-1975
|
带金属护套的压力气体监控的通信电缆的电缆交接箱.内电缆交接箱
|
Joint boxes for pressure gas supervised telecommunication cables, metal sheathed; internal joint boxes
|
| DIN 47629-1986
|
通讯电缆用的压力密封堵塞块.要求和试验
|
Pressure-tight blockstops for telecommunication cables; requirements, tests
|
| DIN 477-4-1982
|
压力气瓶阀.野营用储气瓶的旋转止回阀
|
Compressed gas cylinder valves; swing check valves for camping-cylinders
|
| DIN 477-5-2002
|
气瓶阀.第5部分:最大试验压力为450巴.出口接头
|
Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections
|
| DIN 48083-1-1985
|
压力连接件用压力机模具.标称压力15KN和60KN以下的机械压力机.尺寸
|
Dies for presses for pressure connections; mechanical presses with a nominal compressive force up to 15 and up to 60 kN connecting; dimensions
|
| DIN 48083-3-1985
|
压力连接件用压力机模具.标称压力为300、450 和1000KN以下的液压机.尺寸
|
Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
|
| DIN 48083-4-1985
|
压力连接件用压力机模具.六角形压缩类型尺寸
|
Dies for presses for pressure connections; dimensions of the hexagon compression type
|
| DIN 4809-1-1986
|
热水加热装置用弹性化合物材料制膨胀件(橡胶膨胀件).最高工作温度为100℃和最大压力为10巴
|
Compensators made of elstomeric compound materials (rubber-compensators) for warm water heating-plants; up to a maximum operating-temperature of 100 C and a maximum pressure of 10 bar
|
| DIN 4810-1991
|
供水系统用钢制压力容器
|
Steel pressure vessels for water supply systems
|
| DIN 49016-1-1979
|
电气设备用导管和配件.第1部分:刚性耐火传导式绝缘导管和配件、中型和重型压力用普通耦合器和弯头
|
Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain conduits couplers and bends for medium and heavy pressure strength
|
| DIN 49016-2-1981
|
电气装置用导管和附件.刚性无焰传播的绝缘材料管和附件.中型和重型压力负荷用带耦合器的普通管和带耦合器弯
|
Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for medium and heavy pressure strength
|
| DIN 49017-1-1979
|
电气设备用导管和配件.第1部分:刚性耐火传导式绝缘导管和配件、轻型压力用普通耦合器和弯头
|
Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain couplers and bends for light pressure strength
|
| DIN 49017-2-1981
|
电气设备用导管和管接头.刚性非火焰扩散绝缘导管和管接头.轻压力强度用带接头的光滑导管和带接头的弯头
|
Conduits and fittings for electrical installation; rigid nonflame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for light pressure strength
|
| DIN 49018-1-1972
|
电气设备用导管和配件.第1部分:中型和轻型压力负荷用绝缘材料和耦合器的柔性波纹导管与易燃导管
|
Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material and couplers for middle and light pressure load
|
| DIN 49018-2-1972
|
电气设备用导管和配件.第2部分:带普通机套绝缘材料和重型压力负荷用柔性波纹套管和易燃导管
|
Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material with plain mantle and for heavy pressure load
|
| DIN 49019-1-1972
|
电气设备用导管.第1部分:中型和轻型压力负荷用绝缘材料的柔性普通导管与非易燃导管
|
Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for middle and light pressure load
|
| DIN 49019-2-1978
|
电气设备用导管.中等压力负荷用绝缘材料制柔性难燃普通导管
|
Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for medium pressure load
|
| DIN 49019-3-1975
|
电气设备用导管和配件.第3部分:轻型压力负荷和耐热温度可达 105℃ 的绝缘材料的柔性波纹导管与非易燃导管
|
Conduits and fittings for electrical installation; flexible corrugated and non inflammable conduits of insulating material for light pressure load and a heat resistance up to 105 C
|
| DIN 50104-1983
|
空心体的内压力试验.达到一定内压力值的渗漏检测.一般规范
|
Testing of hollow bodies by internal pressure; leak detection up to a certain pressure value; general specifications
|
| DIN 50106-1978
|
金属材料的检验；压力试验
|
Testing of Metallic Materials; Compression Test
|
| DIN 50312-1977
|
磨料检验.压力喷射用试验箱
|
Testing of abrasives; test cabin for pressure-type blasting
|
| DIN 51079-2-2004
|
陶瓷材料的检验.作为原材料和材料成分的碳化硅的化学分析.第2部分:用酸进行的压力分解
|
Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid
|
| DIN 51302-2-2000
|
材料试验机.拉伸.加压和弯曲试验机的检验.建筑材料压力试验机的钩检验
|
Materials testing machines - Strain cylinder test method for compression testing machines for concrete
|
| DIN 51351-2007
|
润滑剂测试.压力管法测定制冷机油絮凝点
|
Testing of lubricants - Determination of floc point of refrigerator oils by pressure tube method
|
| DIN 51514-1996
|
润滑剂试验.压力管法测定制冷剂中制冷机油的混合空隙
|
Testing of lubricants - Determination of the mixture gap of refrigerator oil in refrigerants by pressure tube method
|
| DIN 51524-1-2006
|
压力液体.液压油.第1部分:HL液压油.最低要求
|
Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements
|
| DIN 51524-2-2006
|
压力液体.液压油.第2部分:HLP液压油.最低要求
|
Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements
|
| DIN 51524-3-2006
|
压力液体.液压油.第3部分:HLP液压油.最低要求
|
Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements
|
| DIN 51640-1989
|
液化石油气的试验.40℃和70℃时蒸气压力的计算
|
Testing of liquified petroleum gases; calculation of vapour pressure at 40 °C and 70 °C
|
| DIN 51805-1974
|
润滑剂试验.润滑脂流动压力的测定.耐蚀试验（Ｋesternich ）法
|
Testing of lubricants; determination of flow pressure of lubricating greases, Kesternich method
|
| DIN 51859-1990
|
气体燃料和其它气体的检验.受气体压力和温度影响冷凝液含量的重力测定
|
Testing of gaseous fuels and other gases; gravimetric determination of the content of condensate as a function of pressure and temperature
|
| DIN 52009-2006
|
集料试验方法.压力下的吸水性测定
|
Test methods for aggregates - Determination of water absorption under pressure
|
| DIN 52192-1979
|
木材的检验.垂直于木纹方向的压力试验
|
Testing of wood; compression test perpendicular to grain
|
| DIN 53291-1982
|
夹层结构的试验.垂直于面层的压力试验
|
Testing of sandwiches; Compression test perpendicular to the faces
|
| DIN 53380-2-2006
|
塑料的试验.测定气体传输率.第2部分:塑料薄膜的压力计法
|
Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films
|
| DIN 53424-1978
|
硬质泡沫材料的检验.在弯曲载荷和压力载荷的高温条件下尺寸稳定性的测定
|
Testing of Rigid Cellular Materials; Determination of Dimensional Stability at Elevated Temperatures with Flexural Load and with Compressive Load
|
| DIN 53758-1975
|
塑料制品的试验.短时间试验内部压力对空心物体作用的测定
|
Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test
|
| DIN 53759-1975
|
塑料制品的试验.长时间试验内部压力对空心物体作用的测定
|
Testing of plastics articles; determination of the effect of internal pressure on hollow objects by long-time test
|
| DIN 53769-3-1988
|
玻璃纤维增强塑料管试验.管子短时间和长时间最大压力试验
|
Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness
|
| DIN 5435-1980
|
手动泵.公称压力为1至2.5的带肩的双孔法兰
|
Hand-pumps; two hole tube flanges with shoulder, for nominal pressure 1 to 2,5
|
| DIN 55170-1961
|
前开台式曲轴压力机.规格
|
Open-Front Bench Type Eccentric Presses; Sizes
|
| DIN 55181-1983
|
机床.额定功率从400kN到4000kN的机械式单动双柱压力机:尺寸
|
Machine tools; straight sided single acting mechanical presses with nominal forces from 400 kN to 4000 kN; sizes
|
| DIN 55184-1985
|
机床.前开式机械能压力机.工具安装范围.结构尺寸、底座、底座环、床身塞子
|
Machine tools; open front mechanical power presses; installation zone for tools; constructional sizes, bedplates, bedplate rings, bed plugs
|
| DIN 55185-1983
|
机床.额定功率从250kN到4000kN的机械式双柱高速压力机.尺寸
|
Machine tools; straight sided high speed mechanical presses with nominal forces from 250 kN to 4000 kN; sizes
|
| DIN 55457-2 Bb.1-1986
|
包装试验.聚烯烃容器.用压力温度法检验抗应力裂纹性能.第2 Bb 1部分:试验设备设计示例
|
Packaging test; containers made from polyolefins; stress cracking resistance, pressure-temperature method; examples for the design of test equipment
|
| DIN 55457-2-2000
|
包装试验.聚烯烃容器.抗应力开裂性.第2部分:压力温度程序
|
Packaging test - Containers made from polyolefines - Part 2: Tension cracking resistance; pressure-temperature procedure
|
| DIN 55560-1-1988
|
可再封闭的防儿童打开的包装.带压力/转动系统(轴向压力作用)的塑料螺旋罩.特技系统的机械检验
|
Reclosable child resistant packages; plastic screw closures with press/turn system (axial pressure effect); mechanical testing of trick system
|
| DIN 5580-1999
|
有轨车辆的压缩空气装置.铝合金压力罐容器.尺寸和标识
|
Compressed air equipment for railway vehicles - Pressure vessels made of aluminium alloys - Dimensions, designation
|
| DIN 5590-1999
|
有轨车辆用压缩空气设备.钢制压力容器.尺寸和标识
|
Compressed air equipment for rail vehicles - Pressure vessels made of steel - Dimensions, designation
|
| DIN 58356-2-2000
|
膜过滤器元件.第2部分:压力保持器的试验
|
Membrane filter elements - Part 2: Pressure holder tests
|
| DIN 6275-1982
|
通用内燃机.容许工作压力在30巴以下的压缩空气罐
|
Internal combustion engines for general purposes; Compressed air containers for permissible working overpressures up to 30 bar
|
| DIN 65210-1-1987
|
航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范
|
Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses
|
| DIN 65210-2-1987
|
航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范
|
Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings
|
| DIN 65210-3-1987
|
航空航天.额定压力最高可达 210 巴的软管组件.第3部分:成套软管组件技术规范
|
Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies
|
| DIN 65211-1-1987
|
航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范
|
Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses
|
| DIN 65211-2-1987
|
航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范
|
Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings
|
| DIN 65211-3-1987
|
航空航天.额定压力最高可达 210 巴的软管组件.第2部分:成套软管组件技术规范
|
Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies
|
| DIN 65213-1988
|
航空航天.公称压力为35巴以下的套管连接用软管.技术规范
|
Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification
|
| DIN 65250-1989
|
航空航天.钛及钛合金制无缝内压力管.尺寸和质量
|
Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses
|
| DIN 65375-1989
|
航空航天.纤维增强的塑料.单向层压板的试验.与纤维方向垂直的压力试验
|
Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction
|
| DIN 65486-1993
|
航空航天.结构用紧固件.旋转紧固件的机械特性.压力密封型紧固件总成
|
Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight
|
| DIN 65493-1993
|
航空航天.结构紧固件.旋转紧固件.压力密封式紧固件插孔
|
Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight
|
| DIN 6647-1-2006
|
包装形式.筒装饮料容器.第1部分:允许工作压力小于3巴、标称容量小于50立升
|
Means of packaging - Cylindrical beverage containers - Part 1: Allowable operating pressure up to 3 bar, nominal volume up to 50 litres
|
| DIN 6647-2-2006
|
包装形式.筒装饮料容器.第2部分:允许工作压力小于7巴、标称容量小于50立升
|
Means of packaging - Cylindrical beverage containers - Part 2: Allowable operating pressure up to 7 bar, nominal volume up to 50 litres
|
| DIN 6647-3-2003
|
包装材料.圆柱形饮料桶.第3部分:允许工作压力不超过3巴、标称容量大于100升
|
Means of package - Cylindrical beverage containers - Part 3: Allowable operating pressure up to 3 bar, nominal volume greater 100 litres
|
| DIN 6647-4-2004
|
包装手段.圆柱形饮料包装盒.第4部分:允许工作压力3巴及以下、标称容量60升及以下的不回收包装
|
Means of packaging - Cylindrical beverage containers - Part 4: Non-returnable packaging withallowable operating pressure up to 3 bar, nominal volume up to 60 litres
|
| DIN 6694-1981
|
带压力卸料装置的散装货车.连接件和设备配件.配置
|
Bulk freight wagons with pressure discharge; connections and further fitments; arrangement
|
| DIN 6697-1979
|
带压力卸料装置的散装料运货车.带板簧的压力计.径向的底部法兰盘连接
|
Bulk freight wagons with pressure discharge; pressure gauge with plate spring, radial bottom flange connection
|
| DIN 6698-1979
|
带压力卸料装置的散装料运货车.护板和支撑架与测试压力计的连接
|
Bulk freight wagons with pressure discharge; guard and support with test connection of pressure gauge
|
| DIN 7079-1-1999
|
抗压力的圆形玻璃－金属熔融观察镜.第1部分:用于带槽面夹持装置
|
Pressure resistant circular glass-to-metal fused sight glasses - Part 1: For holders with recess
|
| DIN 73365-3-1970
|
柴油机喷射泵.第3部分:压力管道连接件
|
Injection pumps for Diesel engines; pressure pipe connections
|
| DIN 74281-1-2000
|
气压制动设备.压力容器.第1部分:钢和铝制焊接单室压力容器的度量方法
|
Air braking systems - Pressure vessels - Part 1: Measures of welded steel and aluminium single chamber pressure vessels
|
| DIN 74315-1999
|
非钎焊压力连接联结器.弯头体
|
Non-soldering compression couplings - Elbow body
|
| DIN 74326-1984
|
气压制动系统.连接件压力试验.连接尺寸
|
Air braking systems; pressure test connection; connecting dimensions
|
| DIN 75551-1988
|
汽车的压力计
|
Pressure gauges for automobiles
|
| DIN 75553-1992
|
压力传感器
|
Pressure sensor
|
| DIN 75554-1992
|
压力表
|
Pressure gauges
|
| DIN 7584-1980
|
家用安装水管配件.压力为10巴的平密封垫带外螺纹的钢管接管嘴
|
Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar
|
| DIN 7585-1980
|
家用安装水管配件.压力为10巴的平密封套管
|
Water-fittings for house installation; sleeves, flat sealing up to work pressure of 10 bar
|
| DIN 7588-1994
|
家装设备用水管配件.平密封螺旋接头.压力10巴的一端带内螺纹,另一端带钢管喷嘴、铜管喷嘴或套管
|
Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
|
| DIN 7589-1994
|
家装设备用水管配件.平密封螺旋接头.压力10巴的一端带外螺纹,另一端带钢管喷嘴、铜管喷嘴和套管
|
Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
|
| DIN 7591-1981
|
家用设备的水管配件.公称压力10巴的两端用软管连接的带扁平垫圈的螺纹连接管
|
Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10
|
| DIN 7592-1981
|
家用安装水管配件.标称工作压力为10巴以下的铜管管嘴
|
Water-fittings for house installation; copper tube nozzles up to working pressure of 10 bar
|
| DIN 7593-1981
|
家用设备的水管配件.公称压力为10巴以下的两端用铜管连接的带垫圈的螺旋连接管
|
Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10
|
| DIN 80006-1998
|
船舶和海上技术.牵引装置的压力点.符号和布局
|
Ships and marine technology - Points of pressure for tugs - Symbols and arrangement
|
| DIN 8063-1-1986
|
未增塑聚氯乙烯压力管道用管连接组件和接头.承口弯头尺寸
|
Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends
|
| DIN 8063-11-1980
|
未增塑聚氯乙烯(刚性 PVC)压力管道的管道连接和管道配件.第11部分:粘合用基体为铜锌合金(黄铜)的套管尺寸
|
Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions
|
| DIN 8063-12-1987
|
未增塑聚氯乙烯压力管道的管连接组件和接头.带法兰的和承口接头的尺寸
|
Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings
|
| DIN 8063-2-1980
|
未增塑聚氯乙烯(刚性 PVC)压力管道的管道连接和管道配件.第2部分:粘合用注塑弯头尺寸
|
Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions
|
| DIN 8063-4-1983
|
未增塑聚氯乙烯压力管道用管连接组件和接头.内外螺母、法兰盘、密封件.尺寸
|
Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
|
| DIN 8063-5-1999
|
未增塑聚氯乙烯压力管道用管接头和元件(PVC-U).第5部分:一般质量要求、试验
|
Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure - Part 5: General quality requirements, testing
|
| DIN 8063-6-2002
|
非增塑聚氯乙烯压力管道连接件和配件.第6部分:溶剂粘结用压铸弯头.尺寸
|
Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 6: Injection-moulded elbows for solvent cementing; Dimensions
|
| DIN 8063-7-1980
|
未增塑聚氯乙烯(未增塑 PVC)压力管道的管道连接和管道配件.第2部分:冷粘合注塑三通和支管尺寸
|
Pipe joints and their elements of unplasticized polyvinylchloride (unplasticized PVC) under pressure; tees and branches of injection moulded for cold welding, dimensions
|
| DIN 8076-1-1984
|
热塑性塑料压力管道.聚乙烯管道的金属压缩接头.一般质量要求、检验
|
Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing
|
| DIN 8076-3-1994
|
热塑性塑料压力管道.第3部分.聚乙烯管道的塑料接头.一般质量要求和试验
|
Pressure pipelines made from thermoplastics materials - Part 3: Plastic joints for PE pipes; general quality requirements, testing
|
| DIN 810-1986
|
机床.压力机.冲压工具的柄布滑块孔.尺寸
|
Machine tools; presses; slide holes for shanks of press tools; dimensions
|
| DIN 8190-1988
|
30°压力角的逆齿（无声）链
|
Inverted tooth (silent) chains with 30° pressure angle
|
| DIN 83402-1-2006
|
压力为1.1巴或3巴及以下的尺寸600×400的人孔盖.第1部分:组件和安装
|
Manhole covers 600 × 400 for pressures up to 1,1 bar or 3 bar - Part 1: Assembly, installation
|
| DIN 83402-2-2006
|
压力在1.1巴至3巴及以下的尺寸为600×400的人孔盖.第2部分:井盖框架
|
Manhole covers 600 × 400 for pressures up to 1,1 bar or 3 bar - Part 2: Frames, covers
|
| DIN 83412-1-2001
|
压力不超过3巴的椭圆形人孔盖(ISO-E型).第1部分:组件、安装
|
Elliptical manhole covers (ISO-type E) for pressures up to 3 bar - Part 1: Assembly, installation
|
| DIN 83412-2-2001
|
压力达3巴的椭圆形人孔盖(ISO-E型).第2部分:框架,盖
|
Elliptical manhole covers (ISO-type E) for pressures up to 3 bar - Part 2: Frames, covers
|
| DIN 85005-7-1999
|
船舶和航海技术.技术文献的图形符号.第7部分:压力液体舱
|
Ships and marine technology - Graphical symbols for technical documentation - Part 7: Pressure tanks
|
| DIN 8583-1-2003
|
压力成形加工工艺.第1部分:分类、细分类、术语和定义
|
Manufacturing processes forming under compressive conditions - Part 1: General; Classification, subdivision, terms and definitions
|
| DIN 8583-2-2003
|
压力成形加工工艺.第2部分:轧制.分类、细分类、术语和定义
|
Manufacturing processes forming under compressive conditions - Part 2: Rolling; Classification, subdivision, terms and definitions
|
| DIN 8583-3-2003
|
压力成形加工工艺.第3部分:自由成形.分类、细分类、术语和定义
|
Manufacturing processes forming under compressive conditions - Part 3: Free forming; Classification, subdivision, terms and definitions
|
| DIN 8583-4-2003
|
压力成形加工工艺.第4部分:模具成形.分类、细分类、术语和定义
|
Manufacturing processes forming under compressive conditions - Part 4: Die forming; Classification, subdivision, terms and definitions
|
| DIN 8583-5-2003
|
压力成形加工工艺.第5部分:压印成形.分类、细分类、术语和定义
|
Manufacturing processes forming under compressive conditions - Part 5: Indentation-forming; Classification, subdivision, terms and definitions
|
| DIN 8583-6-2003
|
压力成形加工工艺.第6部分:挤出.分类、细分类、术语和定义
|
Manufacturing processes forming under compressive conditions - Part 6: Extrusion; Classification, subdivision, terms and definitions
|
| DIN 86001-1997
|
船舶管道.压力等级.试验
|
Pipelines on ships - Pressure ratings, tests
|
| DIN 86021-2002
|
铜合金铸造法兰.公称压力为10、16、25的法兰设计原则
|
Cast flanges of copper alloys - Principles of design for nominal pressure 10, 16, 25
|
| DIN 86029-1987
|
焊接用高颈松套法兰.公称压力10
|
Hubbed slip-on flanges for welding; nominal pressure 10
|
| DIN 86030-1987
|
焊接用高颈松套法兰.公称压力16
|
Hubbed slip-on flanges for welding; nominal pressure 16
|
| DIN 86041-1-1996
|
焊接法兰.第1部分:油箱和海水箱.公称压力10和16
|
Welding Flanges - Part 1: Tanks and sea boxes, nominal pressure 10 and 16
|
| DIN 86041-2-1996
|
焊接法兰.第2部分:舷外接头.公称压力10、16、40
|
Welding flanges - Part 2: Outboard connections, nominal pressure 10, 16, 40
|
| DIN 86042-1978
|
盲孔板( 双孔法兰).按公称压力10和16设计的配合尺寸
|
Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16
|
| DIN 86059-1976
|
公称压力为10的钢管用带固定套环的法兰管闷头
|
Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
|
| DIN 86061-1976
|
公称压力为10 的钢管用带管法兰的连接套管.
|
Connecting sockets with pipe flange, for steel tubes, nominal pressure 10
|
| DIN 86064-1976
|
公称压力为10的钢管用带管法兰和固定环的连接套管.
|
Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10
|
| DIN 86071-1992
|
法兰用全密封面垫片.公称压力为6、10、16、25
|
Full face gaskets for flanges; nominal pressures 6, 10, 16, 25
|
| DIN 86110-1988
|
船舶维护油箱管道系统.灌装与压力平衡设备.探测管
|
Ship service tank piping systems; filing and pressure equalizing equipment; sounding pipes
|
| DIN 86201-2000
|
船上消防设施的国际海岸连接用连接件.公称压力16
|
Fittings for international shore connection of fire extinguishing installations on ships - Nominal pressure 16
|
| DIN 86202-1989
|
船舶用铜制公称压力16的C 型消防带联接器
|
Delivery fire hose coupling type C, PN 16; made of brass, for use on ships
|
| DIN 86203-1989
|
船舶用铜制公称压力16的B 型消防带联接器
|
Delivery fire hose coupling type B, PN 16; made of brass, for use on ships
|
| DIN 86204-1993
|
船舶用黄铜制公称压力16的C型整体消防软管接头
|
Solid fire hose coupling type C, PN 16; made of brass, for use on ships
|
| DIN 86205-1993
|
船舶用黄铜制公称压力16的B型整体消防软管接头
|
Solid fire hose coupling type B, PN 16; made of brass for use on ships
|
| DIN 86206-1996
|
船用公称压力PN 16 C 型灭火水龙带黄铜管帽
|
Cap fire hose coupling type C, PN 16, made of brass for use on board ships
|
| DIN 86207-1996
|
船用公称压力PN 16 B型灭火水龙带黄铜管帽
|
Cap fire hose coupling type B, PN 16, made of brass for use on board ships
|
| DIN 86211-1991
|
公称压力（PN）16、带C或B型消防软管管接头和带法兰连接的灭火阀
|
Fire valves for PN 16, with fire hose couplings type C or B and with flange connection
|
| DIN 8650-1985
|
机床.前开式机械能压力机.验收条件
|
Machine tools; open front mechanical power presses; acceptance conditions
|
| DIN 8651-1990
|
机床.双柱偏心压力机.验收条件
|
Machine tools; straight sided power presses; acceptance conditions
|
| DIN 87101-2003
|
DN为50-150、标称压力为1的垂直自闭式止回阀(止回排水阀).标称压力为10的法兰的配合尺寸
|
Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10
|
| DIN 87151-1-1954
|
过滤器.额定宽度40至200、额定压力2.5、按照额定压力10连接尺寸法兰的灰铸铁粗滤器.汇编和安装尺寸
|
Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, compilation and fitting dimensions
|
| DIN 87151-2-1954
|
过滤器.第2部分:具有符合额定压力 10 的法兰安装尺寸的额定压力为 2.5、额定宽度范围为 40 - 200 的灰铸铁
|
Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, inventories
|
| DIN 8906-1990
|
制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头
|
PN 40 flared flange solderless compression couplings for use in refrigerating systems
|
| DIN 8912-1990
|
制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的接头螺母和螺纹堵塞
|
Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems
|
| DIN 8914-1990
|
制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的90°锥体密封环和密封盖
|
90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems
|
| DIN 9370-1985
|
航空和航天.管子.压力术语分类.计算和设计标准
|
Aerospace; tubes; classification, pressure terms; calculation and design criteria
|
| DIN 9835-1 Bb.1-1987
|
冲压模具用弹性体压力弹簧.弹簧特性
|
Elastomer pressure springs for press tools; spring characteristics
|
| DIN 9835-3-1984
|
冲压模具用弹性体压力弹簧.检验和要求
|
Elastomer pressure springs for press tools; testing and requirements
|
| DIN 9838-2003
|
压力器具.球形锁紧凸模固定板.轻载C类
|
Tools for pressing - Ball-lock punch retainer - Type C, for light duty
|
| DIN CEN/TS 12666-2-2006
|
非压力地下排水和污水管道用塑料管道系统.聚丙烯(PE).第2部分:一致性评估指南.德文版本CEN/TS 12666-2-2005
|
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12666-2:2005
|
| DIN CEN/TS 13244-7-2003
|
通用、排水和污水用地下和地上压力系统用塑料管道系统.聚乙烯.第7部分:合格评定指南
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 13244-7:2003
|
| DIN CEN/TS 14541-2007
|
非压力设备用塑料管道和配件.未增塑聚氯乙烯、聚丙烯和聚乙烯材料应用
|
Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2007
|
| DIN CEN/TS 1456-2-2003
|
直埋式和地上排水和排污用压力塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:符合性评定指南
|
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1456-2:2003
|
| DIN CEN/TS 14758-2-2007
|
非压力地下排水和排污用塑料管道系统.含矿物调节剂的聚丙烯(PP-MD).第2部分:合格性评估指南
|
Plastics piping sytems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 14758-2:2007
|
| DIN CEN/TS 14758-3-2006
|
无压力地下排水和污水塑料管道系统.含矿物调节剂的聚丙烯(PP-MD).第3部分:安装指南
|
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 3: Guidance for installation; German version CEN/TS 14758-3:2006
|
| DIN CEN/TS 15621-2007
|
牲畜饲料.压力分解后用ICP-AES测定钙、钠、磷、镁、钾、硫、铁、锌、铜、锰、钴和钼
|
Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES; German version CEN/TS 15621:2007
|
| DIN CEN/TS 1591-4-2007
|
法兰及其连接件.带垫圈圆形法兰连接件的设计原则.第4部分:服从压力设备指令按设备尺寸做的螺栓连接件装配职
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007
|
| DIN CEN/TS 1852-3-2005
|
无压力地下排水和排污塑料管道系统.聚丙烯(PP).第3部分:安装指南
|
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 3: Guidance for installation; German version CEN/TS 1852-3:2003 + A1:2005
|
| DIN CEN/TS 764-6-2004
|
压力设备.第6部分:操作说明的结构和内容
|
Pressure equipment - Part 6: Structure and content of operating instructions; German version CEN/TS 764-6:2004
|
| DIN EN 10028-1-2003
|
压力容器用扁平钢轧材.第1部分:一般要求
|
Flat products made of steels for pressure purposes - Part 1: General requirements (includes Amendment A1:2002); German version EN 10028-1:2000 + A1:2002
|
| DIN EN 10028-2 Berichtigung 1-2006
|
压力容器用扁平钢轧材.第2部分:具有规定的耐高温性能的非合金钢与合金钢
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003 - Corrigenda to DIN EN 10028-2:2003-09; German version EN 10028-2:2003/AC:2005
|
| DIN EN 10028-2-2003
|
压力容器用扁平钢轧材.第2部分:具有规定的耐高温性能的非合金钢与合金钢
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003
|
| DIN EN 10028-3-2003
|
压力容器用扁平钢轧材.第3部分:经过正火处理的可焊细晶粒钢
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2003
|
| DIN EN 10028-4 Berichtigung 1-2006
|
压力容器用扁平钢轧材.第4部分:具有规定的低温特性的镍合金钢.DIN EN 10028-4-2003勘误
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties; German version EN 10028-4:2003, Corrigenda to DIN EN 10028-4:2003:09; German Version EN 10028-4:2003/AC:2005
|
| DIN EN 10028-4-2003
|
压力容器用扁平钢轧材.第4部分:具有规定的低温特性的镍合金钢
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties; German version EN 10028-4:2003
|
| DIN EN 10028-5-2003
|
压力容器用扁平钢轧材.第5部分:热轧制的可焊细晶粒钢
|
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2003
|
| DIN EN 10028-6-2003
|
压力容器用扁平钢制品.第6部分:淬火和回火的可焊接细粒钢
|
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2003
|
| DIN EN 10028-7 Berichtigung 1-2006
|
压力容器用扁平钢轧材.第7部分:不锈钢.DIN EN 10028-7-2000勘误
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000, Corrigenda to DIN EN 10028-7:2000-06; German version EN 10028-7:2000/AC:2004
|
| DIN EN 10207-2005
|
简单压力容器用钢.钢板、带材和棒材的交货技术条件
|
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars; German version EN 10207:2005
|
| DIN EN 10216-1-2004
|
压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004
|
| DIN EN 10216-2-2007
|
压力用无缝钢管.交货技术条件.第2部分:带特定高温性能的非合金和合金钢管
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007
|
| DIN EN 10216-3-2004
|
压力载荷用无缝钢管.交货技术条件.第3部分:合金细粒钢管
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004
|
| DIN EN 10216-4-2004
|
压力载荷用无缝钢管.交货技术条件.第4部分:带特定低温性能的非合金和合金钢管
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004
|
| DIN EN 10216-5-2004
|
压力用途无缝钢管.交货技术条件.第5部分:不锈钢管
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004
|
| DIN EN 10217-1-2005
|
压力用途焊接钢管.交货技术条件.第1部分:具有室温下规定性能的非合金钢管
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002 + A1:2005
|
| DIN EN 10217-2-2005
|
压力用途焊接钢管.交货技术条件.第2部分:具有较高温度下规定性能的电焊非合金和合金钢管
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002 + A1:2005
|
| DIN EN 10217-3-2005
|
压力用途焊接钢管.交货技术条件.第3部分:细粒合金钢管
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002 + A1:2005
|
| DIN EN 10217-4-2005
|
压力用途焊接钢管.交货技术条件.第4部分:具有低温下规定性能的电焊非合金钢管
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002 + A1:2005
|
| DIN EN 10217-5-2005
|
压力用途焊接钢管.交货技术条件.第5部分:具有较高温度下规定性能的埋弧焊接非合金和合金钢管
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002 + A1:2005
|
| DIN EN 10217-6-2005
|
压力用途焊接钢管.交货技术条件.第6部分:具有低温下规定性能的埋弧焊接非合金钢管
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002 + A1:2005
|
| DIN EN 10217-7-2005
|
压力用途焊接钢管.交货技术条件.第7部分:不锈钢管
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes; German version EN 10217-7:2005
|
| DIN EN 10222-1-2002
|
压力用钢锻件.第1部分:开式模锻件的一般要求 (包括修改件A1:2002); 德文版本 EN 10222-1:1998 + A1:2002
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002); German version EN 10222-1:1998 + A1:2002
|
| DIN EN 10222-3-1999
|
压力用钢制锻件.第3部分:规定低温性能的镍钢
|
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties; German version EN 10222-3:1998
|
| DIN EN 10222-4-2001
|
压力容器用钢锻件.第4部分:高弹限强度可焊接细晶粒钢
|
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001
|
| DIN EN 10222-5-2000
|
压力容器用钢锻件.第5部分:马氏体、奥氏体和奥氏体铁素体不锈钢
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999
|
| DIN EN 10226-1-2004
|
有压力紧固连接件的管道螺纹.第1部分:锥形外螺纹和平行内螺纹.尺寸、公差和名称与符号
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
|
| DIN EN 10226-2-2005
|
螺纹上有压力密封接缝的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸、公差和名称与符号
|
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
|
| DIN EN 10226-3-2005
|
螺纹上有压力密封接缝的管螺纹.第3部分:通过极限量规验证
|
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
|
| DIN EN 10243-1 Berichtigung 1-2005
|
钢模锻件.尺寸公差.第1部分:落锤锻造件和垂直压力锻造件
|
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999, Corrigenda to DIN EN 10243-1:2000-06; German version EN 10243-1:1999/AC:2005
|
| DIN EN 10243-1 Berichtigung 2-2007
|
钢模锻件.尺寸公差.第1部分:落锤和立式压力机锻件
|
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999, Corrigenda to DIN EN 10243-1:2000-06
|
| DIN EN 10243-1-2000
|
钢模锻件.尺寸公差.第1部分:落锤和立式压力机锻件
|
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999
|
| DIN EN 10273-2000
|
规定高温性能的压力容器用热轧可焊钢棒
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties; German version EN 10273:2000
|
| DIN EN 10275-1999
|
金属材料.管环液压压力试验
|
Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
|
| DIN EN 12007-1-2000
|
燃气供应系统.最大使用压力小于等于16bar的管道.第1部分:一般功能推荐规范
|
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations; German version EN 12007-1:2000
|
| DIN EN 12007-2-2000
|
燃气供应系统.最大使用压力小于等于16bar的管道.第2部分:聚乙烯管专用功能推荐规范(最大使用压力小于等于10
|
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar); German version EN 12007-2:2000
|
| DIN EN 12007-3-2000
|
燃气供应系统.最大使用压力小于等于16bar的管道.第3部分:钢专用功能推荐规范
|
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel; German version EN 12007-3:2000
|
| DIN EN 12007-4-2000
|
燃气供应系统.最大使用压力小于等于16bar的管道.第4部分:修复管道的专用功能推荐规范
|
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation; German version EN 12007-4:2000
|
| DIN EN 12094-10-2003
|
固定消防系统.气体灭火系统元件.第10部分:压力计和压力开关的要求和试验方法
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches; German version EN 12094-10:2003
|
| DIN EN 12094-5-2006
|
固定式消防系统.气体灭火系统元件.第5部分:高和低压力选择器阀及其启动器的要求和试验方法
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators; English version of DIN EN 12094-5:2006-07
|
| DIN EN 12263-1999
|
制冷设备和热力泵.压力极限用安全开关设备.要求和试验
|
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests; German version EN 12263:1998
|
| DIN EN 12266-1-2003
|
工业用阀门.阀门试验.第1部分:压力试验、试验程序和验收准则.强制性要求
|
Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003
|
| DIN EN 12295-1999
|
塑料管道系统.热水和冷水用热塑性塑料管和相关管件.管接头耐循环压力的检测方法
|
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
|
| DIN EN 12327-2000
|
燃气供应系统.压力试验、试运行停止试运行过程.功能要求
|
Gas supply systems - Pressure testing, commissioning and decomissioning procedures - Functional requirements; German version EN 12327:2000
|
| DIN EN 12350-7-2000
|
新浇混凝土试验.第7部分:空气含量.压力法
|
Testing fresh concrete - Part 7: Air content; Pressure methods; German version EN 12350-7:2000
|
| DIN EN 12365-2-2003
|
建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第2部分:线性压力试验方法
|
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods; German version EN 12365-2:2003
|
| DIN EN 12392-2000
|
铝和铝合金.锻造产品.压力设备生产装备特殊要求
|
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000
|
| DIN EN 1254-4-1998
|
铜和铜合金.管配件.第4部分:把其它连接端头和毛细管或压力接头相连接的管件
|
Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998
|
| DIN EN 12541-2003
|
卫生便池.压力冲洗阀和自动关闭冲水阀
|
Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10; German version EN 12541:2002
|
| DIN EN 12561-3-2003
|
铁路应用.储罐车.第3部分:压力下液化气用底部装卸式装置; 德文版本 EN 12561-3:2002
|
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure; German version EN 12561-3:2002
|
| DIN EN 12573-2-2000
|
焊接固定无压力热塑性塑料槽罐.第2部分:立式圆柱形槽罐的计算
|
Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks; German version EN 12573-2:2000
|
| DIN EN 12621-2006
|
压力下涂层材料的供应和循环用机器.安全性要求
|
Machinery for the supply and circulation of coating materials under pressure - Safety requirements English version of DIN EN 12621:2006-05
|
| DIN EN 12645-1998
|
压力表.汽车轮胎的压力和充气检验设备.计量、要求和试验
|
Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:1998
|
| DIN EN 12697-25-2005
|
沥青混合物.热混沥青的试验方法.第25部分:循环压力试验
|
Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test; German version EN 12697-25:2005
|
| DIN EN 12778-2005
|
烹饪器具.家用压力炊具
|
Cookware - Pressure cookers for domestic use; German version EN 12778:2002 + AC:2003 + A1:2005
|
| DIN EN 12789-2003
|
高级工业陶瓷.大气压力下陶瓷复合物高温机械特性.挠曲强度测定
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength; German version EN 12789:2002
|
| DIN EN 12865-2001
|
建筑物构件和单元件湿热性能.脉动空气压力下外墙系统防雨性能测定
|
Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure; German version EN 12865:2001
|
| DIN EN 1293-1999
|
气动压力排水管道构件一般要求
|
General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers; German version EN 1293:1999
|
| DIN EN 12952-2-2002
|
水管锅炉和辅助设备.第2部分:锅炉和附件的压力零件用材料; 德文版本 EN 12952-2:2001
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12952-2:2001
|
| DIN EN 12952-3-2002
|
水管锅炉和辅助设备.第3部分:压力零件的设计和计算; 德文版本 EN 12952-3:2001
|
Water tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts; German version EN 12952-3:2001
|
| DIN EN 12952-5-2002
|
水管锅炉和辅助设备.第5部分:锅炉压力部件的工艺和结构; 德文版本 EN 12952-5:2001
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler; German version EN 12952-5:2001
|
| DIN EN 12952-6-2002
|
水管锅炉和辅助设备.第6部分:锅炉压力部件在建造、文件化和作标记过程中的检验; 德文版本 EN 12952-6:2002
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler; German version EN 12952-6:2002
|
| DIN EN 12953-2-2002
|
壳体锅炉.第2部分:锅炉和附件压力部件用材料; 德文版本 EN 12953-2:2002
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12953-2:2002
|
| DIN EN 12953-3-2002
|
壳体锅炉.第3部分:压力部件的设计和计算; 德文版本 EN 12953-3:2002
|
Shell boilers - Part 3: Design and calculation for pressure parts; German version EN 12953-3:2002
|
| DIN EN 12953-4-2002
|
壳体锅炉.第4部分:锅炉压力部件的工艺和结构; 德文版本 EN 12953-4:2002
|
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler; German version EN 12953-4:2002
|
| DIN EN 12953-5-2002
|
壳体锅炉.第5部分:锅炉压力部件在建造、文件化和作标记过程中的检验; 德文版本 EN 12953-5:2002
|
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler; German version EN 12953-5:2002
|
| DIN EN 13016-1-2007
|
液化石油产品.蒸气压力.第1部分:气体饱和蒸气压(ASVP)的测定和计算的干蒸气压当量值(DVPE)
|
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German version EN 13016-1:2007
|
| DIN EN 13016-2-2007
|
液化石油产品.蒸气压力.第2部分:40℃和100℃之间绝对压力(AVP)的测定
|
Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 °C and 100 °C; German version EN 13016-2:2007
|
| DIN EN 13042-5-2004
|
空心玻璃的生产、处理和加工用机械和设备.安全要求.第5部分:压力机
|
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses; German version EN 13042-5:2003
|
| DIN EN 13094-2004
|
危险货物运输用容器.工作压力不超过0.5巴的金属容器.设计和建造
|
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction; German version EN 13094:2004
|
| DIN EN 13160-2-2003
|
检漏系统.第2部分:压力和真空系统
|
Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003
|
| DIN EN 13184-2001
|
无损检测.渗漏试验.压力改变方法
|
Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
|
| DIN EN 13244-1-2003
|
地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第1部分:总则
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General; German version EN 13244-1:2002
|
| DIN EN 13244-2-2003
|
地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第2部分:管道
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes; German version EN 13244-2:2002
|
| DIN EN 13244-3-2003
|
地下和地上通用压力排水排污系统的塑料管道系统.聚乙烯(PE).第3部分:配件
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings; German version EN 13244-3:2002
|
| DIN EN 13244-4-2003
|
地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第4部分:阀门
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves; German version EN 13244-4:2002
|
| DIN EN 13244-5-2003
|
地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第5部分:系统适用性
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 13244-5:2002
|
| DIN EN 13311-3-2001
|
生物技术.容器性能标准.第3部分:玻璃压力容器
|
Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels; German version EN 13311-3:2001
|
| DIN EN 13316-2003
|
危险物品运输槽罐车.槽罐车辅助设备.压力平衡底阀
|
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002
|
| DIN EN 13445 Bb.1-2002
|
防火压力容器.第7部分:合格评定程序使用指南
|
Unfired pressure vessels - Part 7: Guidance on the use of the conformity assessment procedures; German version CEN/CR 13445-7:2002
|
| DIN EN 13445-1-2002
|
未燃烧式压力容器.第1部分:总则; 德文版本 EN 13445-1:2002
|
Unfired pressure vessels - Part 1: General; German version EN 13445-1:2002
|
| DIN EN 13445-1/A1-2007
|
非受火压力容器.第1部分:总则
|
Unfired pressure vessels - Part 1: General; German version EN 13445-1:2002/A1:2007
|
| DIN EN 13445-1/A2-2007
|
非燃烧压力容器.第1部分:总则
|
Unfired pressure vessels - Part 1: General; German version EN 13445-1:2002/A2:2006
|
| DIN EN 13445-2-2002
|
未燃烧式压力容器.第2部分:材料; 德文版本 EN 13445-2:2002
|
Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2002
|
| DIN EN 13445-2/A1-2007
|
非受火压力容器.第2部分:材料
|
Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2002/A1:2007
|
| DIN EN 13445-2/A2-2007
|
非燃烧压力容器.第2部分:材料
|
Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2002/A2:2006
|
| DIN EN 13445-3-2003
|
耐火压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002
|
| DIN EN 13445-3/A11-2007
|
非燃烧压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A11:2006
|
| DIN EN 13445-3/A2-2007
|
非受火压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A2:2007
|
| DIN EN 13445-3/A3-2007
|
非受火压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A3:2007
|
| DIN EN 13445-3/A4-2005
|
非受火压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A4:2005
|
| DIN EN 13445-3/A5-2006
|
未燃烧式压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A5:2005
|
| DIN EN 13445-3/A6-2006
|
非受火压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A6:2006
|
| DIN EN 13445-3/A8-2006
|
非点火的压力容器.第3部分:设计
|
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A8:2006
|
| DIN EN 13445-4-2002
|
未燃烧式压力容器.第4部分:制造; 德文版本 EN 13445-4:2002
|
Unfired pressure vessels - Part 4: Fabrication; German version EN 13445-4:2002
|
| DIN EN 13445-4/A2-2007
|
非燃烧式压力容器.第4部分:制造
|
Unfired pressure vessels - Part 4: Fabrication; German version EN 13445-4:2002/A2:2006
|
| DIN EN 13445-5-2002
|
未燃烧式压力容器.第5部分:检验和测试; 德文版本 EN 13445-5:2002
|
Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002
|
| DIN EN 13445-5/A1-2007
|
非受火压力容器.第5部分:检测和试验
|
Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A1:2007
|
| DIN EN 13445-5/A2-2005
|
不用火加热的压力容器.第5部分:检测和试验
|
Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A2:2005
|
| DIN EN 13445-5/A3-2006
|
非燃烧压力容器.第5部分:检测和试验
|
Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A3:2006
|
| DIN EN 13445-5/A4-2007
|
非燃烧压力容器.第5部分:检测和试验
|
Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A4:2006
|
| DIN EN 13445-5/A5-2006
|
非燃烧压力容器.第5部分:检测和试验
|
Unfired pressure vessels - Part 5: Inspection and testing; English version of DIN EN 13445-5/A5:2006-11
|
| DIN EN 13445-6-2002
|
防火压力容器.第6部分:球墨铸铁压力容器和压力部件的设计和制造要求
|
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2002
|
| DIN EN 13445-6/A1-2004
|
不用火加热的压力容器.第6部分:球墨铸铁制压力容器和压力部件的设计和制造要求
|
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheriodal graphite cast iron; German version EN 13445-6:2002/A1:2004
|
| DIN EN 13445-6/A2-2007
|
非燃烧压力容器.第6部分:球墨铸铁制压力容器和压力部件的设计和制造要求
|
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; English version of DIN EN 13445-6/A2:2007-03
|
| DIN EN 13523-24-2005
|
卷材覆层金属.试验方法.第24部分:耐粘结性和压力标记
|
Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking; German version EN 13523-24:2004
|
| DIN EN 13541-2001
|
建筑物玻璃.保险玻璃.防爆压力试验和分类
|
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; German version EN 13541:2000
|
| DIN EN 13566-2-2006
|
地下非压力排水排污网翻新用塑料管道系统.第2部分:连续管加衬.德文版本 EN 13566-2-2005
|
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes; German version EN 13566-2:2005
|
| DIN EN 13566-4-2003
|
地下非压力排水排污网翻新用塑料管道系统.第4部分:硫化管加衬
|
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes; German version EN 13566-4:2002
|
| DIN EN 13566-7-2007
|
地下非压力排水和排污网络的修缮用塑料管道系统.第7部分:螺旋缠绕管内衬
|
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes; German version EN 13566-7:2007
|
| DIN EN 13598-1-2003
|
无压力地下排水和排污用塑料管道系统.非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE).第1部分:包括浅层检
|
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers; German version EN 13598-1:2003
|
| DIN EN 13631-6-2002
|
民用爆炸物.高级炸药.第6部分:抗流体静压力的测定; 德文版本 EN 13631-6:2002
|
Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure; German version EN 13631-6:2002
|
| DIN EN 13673-1-2003
|
气体和蒸气的最大爆炸压力和最大压升的测定.第1部分:最大爆炸压力的测定
|
Determination of the maximum explosion pressure and the maximum pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure; German version EN 13673-1:2003
|
| DIN EN 13673-2 Berichtigung 1-2007
|
气体和蒸汽的最大爆炸压力和最大压升速率的测定.第2部分:最大爆炸压升速率的测定
|
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise; German version EN 13673-2:2005, Corrigenda to DIN EN 13673-2:2005-12
|
| DIN EN 13673-2-2005
|
气体和蒸气的最大爆炸压力和最大压升速率的测定.第2部分:最大压升爆炸速率的测定.德文版本EN 13673-2-2005
|
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise; German version EN 13673-2:2005
|
| DIN EN 13736 Berichtigung 1-2006
|
机床的安全.气动压力
|
Safety of machine tools - Pneumatic presses; German version EN 13736:2003, Corrigenda to DIN EN 13736:2003-06; German version EN 13736:2003/AC:2004
|
| DIN EN 13736-2003
|
机床安全.气动压力机
|
Safety of machine tools - Pneumatic presses; German version EN 13736:2003
|
| DIN EN 13763-12-2004
|
民用爆炸物.雷管和传爆管.第12部分:雷管抗流体静压力的测定
|
Explosives for civil uses - Detonators and relays - Part 12: Determination of resistance to hydrostatic pressure; German version EN 13763-12:2003
|
| DIN EN 13774-2003
|
最大工作压力为16bar及以下的配气系统用阀.性能要求
|
Valves for gas distribution systems with maximum operating pressure 16 bar - Performance requirements; German version EN 13774:2003
|
| DIN EN 13785 Berichtigung 1-2007
|
不包括在EN 12864中流速≤100 kg/h、最大标称输出压力≤4 bar的调节器和丁烷、丙烷或其混合物用与调节器相
|
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butan, propane or their mixtures; German version EN 13785:2005, Corrigenda to DIN EN 13785:2005-06; German version EN 13785:2005/AC:2007
|
| DIN EN 13785-2005
|
丁烷、丙烷和其混合物用最大容量100 kg/h及以下和最大输出压力4巴及以下的调节器及其相关安全设备(EN 12864
|
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butan, propane ot their mixtures; German version EN 13785:2005
|
| DIN EN 13786-2004
|
丁烷、丙烷或其混合物用最大输出压力4巴以下(包括4巴)和最大容量100 kg/h以下(包括100 kg/h)的自动转换阀及
|
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 13786:2004
|
| DIN EN 13787-2002
|
入口压力达100巴的气体压力调节器和相关安全装置用弹性体; 德文版本 EN 13787:2001
|
Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar; German version EN 13787:2001
|
| DIN EN 13805-2002
|
食品.微量元素的测定.压力分解; 德文版本 EN 13805:2002
|
Foodstuffs - Determination of trace elements - Pressure digestion; German version EN 13805:2002
|
| DIN EN 13900-5-2005
|
颜料和稀释剂.扩散方法和在塑料中可扩散性的评定.第5部分:通过过滤器压力值试验测定
|
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test; German version EN 13900-5:2005
|
| DIN EN 1401-1-1998
|
非压力地下排水和污水用塑料管道系统.硬聚氯乙烯(PVC-V).第1部分:管、管件和系统规范
|
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998
|
| DIN EN 14025 Berichtigung 1-2005
|
危险货物运输箱.金属压力箱.设计和建造.DIN EN 14025-2004的勘误
|
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2003, Corrigenda to DIN EN 14025:2004-02; German version EN 14025:2003/AC:2005
|
| DIN EN 14025-2004
|
危险货物运输箱.金属压力箱.设计和建造
|
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2003
|
| DIN EN 14034-1-2004
|
尘云的爆炸特性测定.第1部分:尘云的最大爆炸压力p<指数max>的测定
|
Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure p<(Index)max> of dust clouds; German version EN 14034-1:2004
|
| DIN EN 14034-2-2006
|
尘云的爆炸特性测定.第2部分:尘云爆炸压力上升的最大比率(dp/dt)<上标max>的测定
|
Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt) of dust clouds English version of DIN EN 14034-2:2006-08
|
| DIN EN 14208-2004
|
可运输气瓶.气体运输用容量在1000升及以下的焊接压力鼓形物的规范
|
Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction; German version EN 14208:2004
|
| DIN EN 14276-1-2006
|
冷冻系统和热力泵压力设备.第1部分:容器.一般要求
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements English version of DIN EN 14276-1:2006-09
|
| DIN EN 14276-2-2007
|
制冷系统和热泵压力设备.第2部分:管道.一般要求
|
Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements; German version EN 14276-2:2007
|
| DIN EN 14289-2004
|
皮革.物理和机械试验.水渗透压力的测定
|
Leather - Physical and mechanical tests - Determination of water penetration pressure; German version EN 14289:2003
|
| DIN EN 14364-2006
|
压力和无压力排水和排污塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统.管件、配件和连接
|
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints English version of DIN EN 14364:2006-07
|
| DIN EN 14367-2005
|
有不同压力区的非可控防回流组件.C类.A型；德文版本 EN 14367-2005
|
Non controllable backflow preventer with different pressure zones - Family C, type A; German version EN 14367:2005
|
| DIN EN 14382-2005
|
气体压力调节站和装置用安全设备.用于入口压力100bar及以下的气体安全关闭装置
|
Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar; German version EN 14382:2005
|
| DIN EN 14452-2005
|
防饮用水回流污染的装置.带大气压力孔和移动元件的管阻流器DN10至DN 20. B型D系列
|
Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005
|
| DIN EN 14453-2005
|
防饮用水回流污染的装置.带恒定大气压力孔的管阻流器DN10至DN 20. C型D系列
|
Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005
|
| DIN EN 14513-2005
|
可移动储气瓶.防爆板压力释放装置(不含乙炔储气瓶)
|
Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders); German version EN 14513:2005
|
| DIN EN 1456-1-2001
|
地下和地上排水和排污塑料压力管道系统.未增塑聚氯乙烯(PVC-U).第1部分:管道元件和系统规范
|
Plastics piping systems for buried and above ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for piping components and the system; German version EN 1456-1:2000
|
| DIN EN 14584-2005
|
无损检验.声音排放.在验证试验过程中金属压力设备的检验.AE源的平面位置
|
Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2005
|
| DIN EN 14585-1 Bb.1-2006
|
压力设备用波纹金属软管组件.第2部分:合格评定程序使用指南
|
Corrugated metal hose assemblies for pressure applications - Guidance on the use of conformity assessment procedures; English version of DIN EN 14585-1 Supplement 1:2006-04
|
| DIN EN 14585-1-2006
|
压力设备用波纹金属软管组件.第1部分:要求
|
Corrugated metal hose assemblies for pressure applications - Part 1: Requirements; German version EN 14585-1:2006
|
| DIN EN 14595-2005
|
危险物品运输罐.罐的辅助设备.压力和真空通气口
|
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent; German version EN 14595:2005
|
| DIN EN 14627-2005
|
食品.痕量元素测定.压力溶解后用氢化原子吸收光谱测定法(HGAAS)测定砷和硒的总量
|
Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion; German version EN 14627:2005
|
| DIN EN 14680-2006
|
非压力热塑管道系统用粘合剂.规范
|
Adhesives for non-pressure thermoplastic piping systems - Specifications; English version of DIN EN 14680:2006-12
|
| DIN EN 14741-2006
|
热塑管和管道系统.地下非压力设施用接头.通过评估密封压力测定弹性密封件接头的长期密封性能的试验方法
|
Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure English version of DIN EN 14741:2006-05
|
| DIN EN 14769-2006
|
沥青和沥青粘合剂.用压力老化容器(PAV)调节加速长期老化
|
Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV); German version EN 14769:2005
|
| DIN EN 14801-2006
|
水和废水管道产品的压力分类条件
|
Conditions for pressure classification of products for water and wastewater pipelines English version of DIN EN 14801:2006-09
|
| DIN EN 14814-2007
|
压力下流体用热塑性管道系统的粘合剂.规范
|
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications; German version EN 14814:2007
|
| DIN EN 14876-2007
|
可运输气瓶.焊接钢压力气罐的周期检测和试验
|
Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums; English version of DIN EN 14876:2007-04
|
| DIN EN 1489-2000
|
建筑物阀门.压力安全阀门.试验和要求
|
Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000
|
| DIN EN 14893-2006
|
LPG设备和组件.容积在150升和1000升之间的可运输液化石油气(LPG)焊接钢压力鼓
|
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres; English version of DIN EN 14893:2006-10
|
| DIN EN 1490-2000
|
建筑物阀门.组合型温度压力安全阀.试验和要求
|
Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000
|
| DIN EN 15266-2007
|
建筑物中工作压力等于0.5bar的气体用不锈钢柔性波管工具
|
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar; German version EN 15266:2007
|
| DIN EN 153000-1999
|
总规范.分立的压力触点功率半导体装置(资格认可)
|
Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval); German version EN 153000:1998
|
| DIN EN 15550-2007
|
动物饲料.压力消解后用石墨炉原子吸收光谱法(GF-AAS)测定镉和铅含量
|
Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion; German version EN 15550:2007
|
| DIN EN 1594-2000
|
供气系统.最大工作压力大于16巴的管道.功能要求
|
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2000
|
| DIN EN 1595-1997
|
硼硅酸盐玻璃3.3制压力设备.设计、制造和检验总则
|
Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing; German version EN 1595:1997
|
| DIN EN 1605-2007
|
建筑用隔热制品.在特定的压力负荷和温度条件下测定变形
|
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:1996 + A1:2006
|
| DIN EN 1653-2000
|
铜和铜合金.锅炉、压力容器和热水存储设备用板材、薄板材和环材(包括修改件A1-2000)
|
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes amendment A1:2000); German version EN 1653:1997 + A1:2000
|
| DIN EN 1671-1997
|
建筑物外压力排污系统
|
Pressure sewerage systems outside buildings; German version EN 1671:1997
|
| DIN EN 1708-1-1999
|
焊接.钢焊接连接点的基本细节.第1部分:受压力部件
|
Welding - Basic weld joint details in steel - Part 1: Pressurized components; German version EN 1708-1:1999
|
| DIN EN 1775-2007
|
供气.建筑物用煤气管道工程.最大工作压力≤5bar.功能推荐
|
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007
|
| DIN EN 1796-2006
|
有或无压力水供应塑料管道系统.基于不饱和聚酯(UP)的玻璃增强热硬塑料(GRP)
|
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) English version of DIN EN 1796:2006-05
|
| DIN EN 1854-2006
|
气体燃烧炉和气体燃烧装置的压力监控器
|
Pressure sensing devices for gas burners and gas burning appliances; English version of DIN EN 1854:2006-07
|
| DIN EN 1893-2005
|
高级工业陶瓷.大气压力高温环境中陶瓷组分的机械特性.抗拉特性测定
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties; German version EN 1893:2005
|
| DIN EN 1894-2005
|
高级工业陶瓷.惰性气体高温环境中陶瓷组分的机械特性.有凹槽试样在压力荷载下剪切强度的测定
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005
|
| DIN EN 1964-2-2002
|
可运输气瓶.水容量为0.5升到150升(含150升)的可再填充可运输无缝钢瓶设计和制造规范.第2部分:阀门压力R<上
|
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above; German version EN 1964-2:2001
|
| DIN EN 22858-1993
|
端布抽吸式离心泵(额定压力16巴).标示、额定功率和尺寸
|
End-suction centrifugal pumps (rating 16 bar); designation, nominal duty point and dimensions (ISO 2858:1975); German version EN 22858:1993
|
| DIN EN 2591-612-2002
|
航空航天系列.光电连接件.试验方法.第612部分:光学元件.电缆附件有效性.电缆轴向压力
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression; German and English version EN 2591-612:2002
|
| DIN EN 286-1-1998
|
空气或氮气用非受火简易压力容器.第1部分:普通压力容器
|
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German version EN 286-1:1998
|
| DIN EN 286-1/A1-2002
|
装有空气或氮气的简易非点火压力容器.第1部分:通用压力容器.修改件 A1; 德文版本 EN 286-1:1998/A1:2002 +
|
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; Amendment A1; German version EN 286-1:1998/A1:2002 + AC:2002
|
| DIN EN 286-1/A2-2005
|
罐装空气或氮气用非受火简易压力容器.第1部分:通用压力容器.德国版本 EN 286-1-1998/A2-2005
|
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German version EN 286-1:1998/A2:2005
|
| DIN EN 286-2-1992
|
空气和氮气用简易不受热压力容器.第2部分:汽车和挂车上空气制动设备和辅助装置用压力容器
|
Simple unfired pressure vessels designed to contain air or nitrogen; part 2: pressure vessels for air braking and auxiliary systems for motor-vehicles and their trailers; german version EN 286-2:1992
|
| DIN EN 286-3-1994
|
装空气或氮气用的简单的不受燃烧加热的压力容器.第3部分:铁路机车车辆的压缩空气制动设备和辅助气动设备用
|
Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-3:1994
|
| DIN EN 286-4-1994
|
装空气和氮气用的简单的不受燃烧加热的压力容器.第4部分:轨道车辆中空气制动设备和气动辅助装置用铝合金制
|
Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-4:1994
|
| DIN EN 289-2004
|
橡胶和塑料加工机械.压力机.安全要求
|
Plastics and rubber machines - Presses - Safety requirements; German version of EN 289:2004
|
| DIN EN 3-8-2007
|
便携式灭火器.第8部分:最小允许压力≤30巴的灭火器的结构、耐压和机械性能试验用对EN 3-7的附加要求
|
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar; English version of DIN EN 3-8:2007-02
|
| DIN EN 303-4-1999
|
供暖锅炉.第4部分:带强制送风燃烧炉的供暖锅炉.功率70kV以下,最大工作压力3巴的带强制送风的油燃烧炉的供暖
|
Heating boilers - Part 4: Heating boilers with forced draught burners; special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar; terminology, special requirements, testing and marking; German version EN 303-4:1999
|
| DIN EN 303-6-2000
|
采暖锅炉.第6部分：采用压力通风燃烧器的采暖锅炉.标称输入不超70kW雾化燃油燃烧器分节锅炉家庭热水运行的
|
Heating boilers - Part 6: Heating boilers with forced draught burners; specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW; German version EN 303-6:2000
|
| DIN EN 3079-2007
|
航空航天系列.8°30'压力28000 kPa的管道联接器.适配器.米制系列.技术规范
|
Aerospace series - Pipe coupling 8°30' up to 28000 kPa - Adaptors - Metric series - Technical specification; German and English version EN 3079:2006
|
| DIN EN 3268-2002
|
航空航天系列.钛合金8°30'管连接件.压力插头; 德文版本 EN 3268:2001
|
Aerospace series - Pipe coupling 8°30 in titanium alloy - Pressure plug; German version EN 3268:2001
|
| DIN EN 334-2005
|
入口压力100巴及以下用气体压力调节器
|
Gas pressure regulators for inlet pressures up to 100 bar; German version EN 334:2005
|
| DIN EN 3688-2004
|
航空航天系列.焊接管用钛合金制成的T环形填充物.14000kPa标称压力
|
Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPa nominal pressure; German and English version EN 3688:2001 + AC:2003
|
| DIN EN 3689-2004
|
航空航天系列.焊接管用钛合金制成的T环形填充物.28000kPa标称压力
|
Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure; German and English version EN 3689:2001 + AC:2003
|
| DIN EN 437-2003
|
试验气体.试验压力.设备种类
|
Test gases - Test pressures - Appliances categories; German version EN 437:2003
|
| DIN EN 472-1994
|
压力测量仪.词汇; 德文版本 EN 472:1994
|
Pressure gauges - Vocabulary; German version EN 472:1994
|
| DIN EN 50216-5-2007
|
电力变压器和电抗器配件.第5部分:液位计、压力装置和流量指示器、压力释放装置和脱水通气装置
|
Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers; German version EN 50216-5:2002 + A3:2006
|
| DIN EN 50289-3-15-2004
|
通信电缆.试验方法规范.第3-15部分:机械试验方法.海底电缆耐静水压力
|
Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods - Underwater cable resistance to hydrostatic pressure; German version EN 50289-3-15:2003
|
| DIN EN 50464-1-2007
|
最高压力不超过36kV的设备用50Hz、50kVA至2500kVA的三相油浸式配电变压器.第1部分:一般要求
|
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements; German version EN 50464-1:2007
|
| DIN EN 50464-2-1-2007
|
最高压力不超过36kV的设备用50Hz、50kVA至2500kVA的三相油浸式配电变压器.第2-1部分:高压侧和/或低压侧上带
|
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-1: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - General requirements; German version EN 50464-2-1:2007
|
| DIN EN 50464-2-2-2007
|
最高压力不超过36kV的设备用50Hz、50kVA至2500kVA的三相油浸式配电变压器.第2-2部分:高压侧和/或低压侧上带
|
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1; German version EN 50464-2-2:2007
|
| DIN EN 50464-2-3-2007
|
最高压力不超过36kV的设备用50Hz、50kVA至2500kVA的三相油浸式配电变压器.第2-3部分:高压侧和/或低压侧上带
|
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-3: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1; German version EN 50464-2-3:2007
|
| DIN EN 50464-3-2007
|
最高压力不超过36kV的设备用50Hz、50kVA至2500kVA的三相油浸式配电变压器.第3部分:载有非正弦电流的变压器
|
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal currents; German version EN 50464-3:2007
|
| DIN EN 50464-4-2007
|
最高压力不超过36kV的设备用50Hz、50kVA至2500kVA的三相油浸式配电变压器.第4部分:关于增压式波形槽的要求
|
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks; German version EN 50464-4:2007
|
| DIN EN 512/A1-2002
|
纤维水泥制品.压力管道和接头.修改件A1:2001; 德文版本 EN 512:1994/A1:2001
|
Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001
|
| DIN EN 562-2003
|
气焊设备.焊接、切割和相关工艺用压力表
|
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes; German version EN 562:2003
|
| DIN EN 60811-3-1-2002
|
电缆绝缘和护套材料.通用试验方法.第3-1部分:聚氯乙烯化合物的专用方法.高温压力试验.耐裂解试验 (IEC 6081
|
Insulating and sheathing materials of electric cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature, test for resistance to cracking (IEC 60811-3-1:1985 + Corrigendum:1986 + A1:1994 + A2:2001); German version EN 60811-3-1:1995 + A1:1996 + A2:2001
|
| DIN EN 61094-2-1994
|
扩音器的测量.第2部分:可逆法校准实验室标准扩音器压力的基本方法
|
Measurement microphones; part 2: primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:1992); German version EN 61094-2:1993
|
| DIN EN 61094-5-2003
|
测量传声器.第5部分:通过比对进行标准传声器工作时的压力校准方法
|
Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001); German version EN 61094-5:2001
|
| DIN EN 61300-2-11-1998
|
光纤互联装置和无源部件.基本试验和测量程序.第2-11部分:试验:轴向压力 (IEC 61300-2-11:1995); 德文版本 E
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests; axial compression (IEC 61300-2-11:1995); German version EN 61300-2-11:1997
|
| DIN EN 61518-2002
|
差动压力测量仪器和压强可达413巴(41,3 MPa)带凸缘的关闭装置之间的配合尺寸 (IEC 61518:2001); 德文版本 E
|
Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 61518:2001); German version EN 61518:2001 + Corrigendum:2002
|
| DIN EN 61846-1999
|
超声波.压力脉冲碎石器.电磁场特性
|
Ultrasonics - Pressure pulse lithotripters - Characteristics of fields (IEC 61846:1998); German version EN 61846:1998
|
| DIN EN 676-2003
|
气体燃料用自动压力通风燃烧器
|
Automatic forced draught burners for gaseous fuels; German version EN 676:2003
|
| DIN EN 692-2006
|
机床.机械压力.安全性.德文版本 EN 692-2005
|
Machine tools - Mechanical presses - Safety; German version EN 692:2005
|
| DIN EN 712-1994
|
热塑塑料管道系统.压力管和管接头之间承载端部的机械连接.恒定纵向作用力下抗拉出力的试验方法
|
Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993
|
| DIN EN 713-1994
|
塑料管道系统.管接头和聚烯烃压力管间的机械连接.在内压和弯曲下密封性的试验方法
|
Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993
|
| DIN EN 714-1994
|
热塑管道系统.压力管道和模压管件之间无末端承载的橡胶密封圈连接件.无端部拉力的流体静力内压力下的密封性
|
Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
|
| DIN EN 715-1994
|
热塑塑料管道系统.小直径压力管和管接头之间承载端部的连接.在水内压力下（包括端头推力）密封试验方法
|
Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994
|
| DIN EN 764-1-2004
|
压力设备.第1部分:术语.压力、温度、容积和标称尺寸
|
Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size; German version EN 764-1:2004
|
| DIN EN 764-2-2002
|
压力设备.第2部分:数量、符号和单位; 德文版本 EN 764-2:2002
|
Pressure equipment - Part 2: Quantities, symbols and units; German version EN 764-2:2002
|
| DIN EN 764-3-2002
|
压力设备.第3部分:有关各方的定义; 德文版本 EN 764-3:2002
|
Pressure equipment - Part 3: Definition of parties involved; German version EN 764-3:2002
|
| DIN EN 764-4-2003
|
压力设备.金属材料交货技术条件的规定
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials; German version EN 764-4:2002
|
| DIN EN 764-5-2003
|
压力设备.第5部分:金属材料检验文件及材料规范
|
Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification; German version EN 764-5:2002
|
| DIN EN 764-7 Berichtigung 1-2006
|
压力设备.不用火加热的压力容器的安全性系统
|
Pressure equipment - Part 7:Safety systems for unfired pressure vessels; German version EN 764-7:2002, Corrigenda to DIN EN 764-7:2002-09; German version EN 764-7:2002/AC:2006
|
| DIN EN 764-7-2002
|
压力设备.第7部分:不用火加热的压力设备用安全系统; 德文版本 EN 764-7:2002
|
Pressure equipment - Part 7: Safety systems for unfired pressure equipment; German version EN 764-7:2002
|
| DIN EN 802-1994
|
塑料管道和管道输送系统.压力管道系统用喷铸热塑管件.压碎造成最大变形的试验方法; 德文版本 EN 802:1994
|
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
|
| DIN EN 803-1994
|
塑料管道系统.压力管道用橡胶密封圈连接件的热塑喷铸管件.无端部拉力的抗瞬时内压的试验方法; 德文版本 EN
|
Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
|
| DIN EN 804-1994
|
塑料管道系统.压力管道用带胶粘套管连接件的热塑喷铸管件.抗流体静力瞬时内压能力的试验方法; 德文版本 EN
|
Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
|
| DIN EN 837-3-1997
|
压力计.第3部分:膜片和膜盒式压力计.尺寸、测量技、要求和试验
|
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
|
| DIN EN 869-2007
|
机械安全.金属压力铸造设备安全要求
|
Safety of machinery - Safety requirements for pressure metal diecasting units; English version of DIN EN 869:2007-02
|
| DIN EN 88-1996
|
输入压力不超过200mbar的煤气设备调压器
|
Pressure governors for gas appliances for inlet pressures up to 200 mbar; German version EN 88:1991 + A1:1996
|
| DIN EN 911-1995
|
塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头的连接.外部静力液压条件下的防漏试验方法;
|
Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
|
| DIN EN 976-1-1997
|
玻璃钢制地下槽罐(GRP).石油基液化燃料无压力存储用卧式圆桶罐.第1部分:单壁罐的要求和试验方法
|
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks; German version EN 976-1:1997
|
| DIN EN 976-2-1997
|
玻璃钢制地下槽罐(GRP).石油基液化燃料无压力存储用卧式圆桶罐.第2部分:运输,搬运,中间存储,单壁罐的安装
|
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks; German version EN 976-2:1997
|
| DIN EN ISO 10079-3-2000
|
医用吸引设备.第3部分:真空或用压力驱动的吸引设备
|
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999); German version EN ISO 10079-3:1999
|
| DIN EN ISO 10426-4-2005
|
石油和天然气工业.油井固井用水泥和材料.第4部分:在大气压力下泡沫水泥浆的制备和检验
|
Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004); English version EN ISO 10426-4:2004
|
| DIN EN ISO 10426-5-2006
|
石油和天然气工业.油井固井用水泥和材料.第5部分:在大气压力下固井水泥加工制剂的收缩和膨胀的测定(ISO 104
|
Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004); English version EN ISO 10426-5:2005
|
| DIN EN ISO 10524-1-2006
|
医用气体设备用的压力调节器.第1部分:压力调节器和带流量计设备的压力调节器(ISO 10524-1-2006)
|
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006); English version of DIN EN ISO 10524-1:2006-05
|
| DIN EN ISO 10524-2-2006
|
医用气体用压力调节器.第2部分:进气压力调节器和线性压力调节器(ISO 10524-2:2005)
|
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005); English version of DIN EN ISO 10524-2:2006-07
|
| DIN EN ISO 10524-3-2006
|
医疗气体用压力调节器.第3部分:带气缸阀的压力调节器(ISO 10524-3:2005)
|
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005); English version of DIN EN ISO 10524-3:2006-07
|
| DIN EN ISO 1167-1-2006
|
流体传输用热塑管、接头和组件.抗内压力的测定.第1部分:通用方法
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); English version of DIN EN ISO 1167-1:2006-05
|
| DIN EN ISO 1167-2-2006
|
流体传输用热塑管、接头和组件.抗内压力的测定.第2部分:管试件的准备
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); English version of DIN EN ISO 1167-2:2006-05
|
| DIN EN ISO 12162-1996
|
压力管道用热塑性材料.分类.材料牌号和计算
|
Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure - Material designation and calculations (ISO 12162:1995); German version EN ISO 12162:1995
|
| DIN EN ISO 13760-1998
|
压力下液体输送用塑料管.Miner法则.累积损坏的计算方法
|
Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998
|
| DIN EN ISO 13783-1998
|
塑料管体系.未增塑聚氯乙烯(PVC-U)端部承载双套管连接件.在经受弯曲和内压力时检测密封性和机械强度的试验
|
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997
|
| DIN EN ISO 14113-1997
|
气焊设备.最大设计压力不超过450巴液化气橡胶及塑料软管组件
|
Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997
|
| DIN EN ISO 15265-2004
|
热环境的人类工效学.热工作环境中防止压力和不适的风险评估策略
|
Ergonomics of the thermal environment - Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions (ISO 15265:2004); German version EN ISO 15265:2004
|
| DIN EN ISO 15364-2002
|
船舶和航海技术.油轮用压力/真空阀 (ISO 15364:2000); 德文版本 EN ISO 15364:2001
|
Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001
|
| DIN EN ISO 15616-3-2003
|
高质量焊接和切割用CO2激光机验收试验.第3部分:气体流量和压力测量仪校正
|
Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
|
| DIN EN ISO 15996-2005
|
气瓶.残余压力阀门.一般要求和型式试验
|
Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005); German version EN ISO 15996:2005
|
| DIN EN ISO 17654-2003
|
金属材料焊缝破坏检验.电阻焊.电阻缝焊压力试验
|
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003
|
| DIN EN ISO 20623-2004
|
石油和相关产品.液体的极限压力和抗磨性能的测定.四球法
|
Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003); German version EN ISO 20623:2003
|
| DIN EN ISO 22088-4-2006
|
塑料.耐环境应力碎裂的测定(ESC).第4部分:球或钉压力法(ISO 22088-4:2006)
|
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006); English version of DIN EN ISO 22088-4:2006-11
|
| DIN EN ISO 22435-2007
|
储气瓶.带整体压力调节器的气缸阀.规范和类型测试
|
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007); German version EN ISO 22435:2007
|
| DIN EN ISO 23251-2007
|
石油、石化和天然气工业.压力释放和降压系统
|
Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006); English version EN ISO 23251:2007
|
| DIN EN ISO 2503-1998
|
气焊设备.300巴以下的焊接、切割和相关工艺中使用的气体瓶的压力调节器
|
Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998); German version EN ISO 2503:1998
|
| DIN EN ISO 2556-2001
|
塑料.大气压力下薄膜和薄板的透气率的测定.测压法
|
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974); German version EN ISO 2556:2000
|
| DIN EN ISO 2811-4-2002
|
涂料和清漆.密度的测定.第4部分:压力杯法(ISO 2811-4:1997); 德文版本 EN ISO 2811-4:2001
|
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:1997); German version EN ISO 2811-4:2001
|
| DIN EN ISO 3993-1995
|
液化石油气和轻质烃类.密度或相对密度的测定.压力液体比重测定法 (ISO 3993:1984); 德文版本 EN ISO 3993:1
|
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995
|
| DIN EN ISO 4256-1999
|
液化石油气.蒸汽压力测定.液化石油气法
|
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998
|
| DIN EN ISO 4622-1994
|
颜料和清漆.堆积压力试验 (ISO 4622:1992); 德文版本 EN ISO 4622:1994
|
Paints and varnishes - Pressure test for stackability (ISO 4622:1992); German version EN ISO 4622:1994
|
| DIN EN ISO 6520-2-2002
|
焊接及相关工艺.金属材料中几何缺陷的分类.第2部分:压力焊(ISO 6520-2:2001); 德文版本 EN ISO 6520-2:2001
|
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001
|
| DIN EN ISO 6803-1997
|
橡胶和塑料软管及软管组件.无弯曲液压压力脉冲试验
|
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
|
| DIN EN ISO 7458-2004
|
玻璃容器.耐内部压力性.试验方法
|
Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004); German version EN ISO 7458:2004
|
| DIN EN ISO 7751-1997
|
橡胶和塑料软管及软管组件.试验压力和爆破压力与设计工作压力的比值 (ISO 7751:1991); 德文版本 EN ISO 775
|
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997
|
| DIN EN ISO 8536-10-2005
|
医用输液器具.第10部分:与压力输液仪一起使用的输液管的附件
|
Infusion equipment for medical use - Part 10: Accessories for fluid lines for use with pressure infusion equipment (ISO 8536-10:2004); German version EN ISO 8536-10:2004
|
| DIN EN ISO 8536-11-2005
|
医用输液器具.第11部分:与压力输液仪一起使用的输液过滤器
|
Infusion equipment for medical use - Part 11: Infusion filters for use with pressure infusion equipment (ISO 8536-11:2004); German version EN ISO 8536-11:2004
|
| DIN EN ISO 8536-8-2005
|
医用输液器具.第8部分:有压力输液仪的输液器具
|
Infusion equipment for medical use - Part 8: Infusion equipment for use with pressure infusion apparatus (ISO 8536-8:2004); German version EN ISO 8536-8:2004
|
| DIN EN ISO 8536-9-2005
|
医用输液器具.第9部分:与压力输液仪一起使用的输液管
|
Infusion equipment for medical use - Part 9: Fluid lines for use with pressure infusion equipment (ISO 8536-9:2004); German version EN ISO 8536-9:2004
|
| DIN EN ISO 8973-2000
|
液化石油气.密度和蒸气压力的计算
|
Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999
|
| DIN EN ISO 9311-3-2005
|
热塑性管道系统用胶粘剂.第3部分:耐内压力性测定的试验方法
|
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005); German version EN ISO 9311-3:2005
|
| DIN EN ISO 9863-1-2005
|
土工合成织物.特定压力下厚度的测定.第1部分:单层
|
Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2005); German version EN ISO 9863-1:2005
|
| DIN EN ISO 9863-2-1996
|
土工织物和相关产品.规定压力下的厚度测定.第2部分:多层制品的单层厚度测定方法
|
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996); German version EN ISO 9863-2:1996
|
| DIN ISO 10069-2-2000
|
压力工具.弹性体压缩弹簧.第2部分:附件规范
|
Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:1991)
|
| DIN ISO 10242-1-2000
|
压力工具.冲头柄.第1部分:A型
|
Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:1998)
|
| DIN ISO 10242-2-2000
|
压力工具.冲头柄.第2部分:C型
|
Tools for pressing - Punch holder shanks - Part 2: Type C (ISO 10242-2:1991)
|
| DIN ISO 10243-1993
|
冲压工具.矩形截面的压力弹簧.安装座的尺寸和颜色代码
|
Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding; identical with ISO 10243:1991
|
| DIN ISO 10763-2004
|
液压传动.端面平齐的无缝和焊接型精密钢管.尺寸和标称工作压力
|
Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994)
|
| DIN ISO 11-1997
|
飞机.压力座舱地面压力试验连接装置
|
Aircraft - Ground pressure testing connections for pressure cabins (ISO 11:1987)
|
| DIN ISO 15171-1-2004
|
流体传动和一般用途管接头.诊断用液压管接头.第1部分:非压力下连接的管接头
|
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
|
| DIN ISO 15171-2-2004
|
流体传动和一般用途管接头.诊断用液压管接头.第2部分:带M12 2螺纹端的压力连接接头
|
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000)
|
| DIN ISO 2162-2-1994
|
技术产品文献.弹簧.第2部分:圆柱形螺旋压力弹簧的说明
|
Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs; identical with ISO 2162-2:1993
|
| DIN ISO 3322-2001
|
液压系统和元件.作动筒.公称压力
|
Fluid power systems and components - Cylinders - Nominal pressures (ISO 3322:1985)
|
| DIN ISO 3583-1987
|
道路车辆.压缩空气气动制动设备的压力试验连接.与ISO 3583, 1984版相同
|
Road vehicles; pressure test connection for compressed-air pneumatic braking equipment; identical with ISO 3583, edition 1984
|
| DIN ISO 45-1983
|
航空和航天.压力加油连接装置
|
Aircraft; pressure refuelling connections
|
| DIN ISO 4548-6-1990
|
内燃机.满流式机油滤清器的试验方法.静态爆破压力试验
|
Internal combustion engines; methods of test for full-flow lubricating oil filters; static burst pressure test; identical with ISO 4548-6:19855
|
| DIN ISO 5682-3-1999
|
农用机械和拖拉机.农作物保护设备.第3部分:压力调节系统的测试方法
|
Agricultural machinery and tractors - Equipment for crop protection - Part 3: Test methods for pressure-adjustment systems (ISO 5682-3:1997)
|
| DIN ISO 6162-1-2006
|
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:压力为3.5MPa至35MPa(35巴至350巴)
|
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
|
| DIN ISO 6162-2-2006
|
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第2部分:压力为35MPa至40MPa(350巴至400巴)
|
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
|
| DIN ISO 6771-1984
|
航空航天.航空航天结构.流体系统和部件.压力和温度
|
Aerospace; aerospace construction; fluid systems and components; pressure and temperature
|
| DIN ISO 9022-5-1999
|
光学和光学仪器.环境试验方法.第5部分:低温度低压力组合试验
|
Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994)
|
| DIN ISO 9457-2-1997
|
道路车辆.米制起动器电动机小齿轮.第2部分:20度压力角小齿轮
|
Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle (ISO 9457-2:1994)
|
| DIN ISO 9939-1995
|
航空航天. 压力加油连接器(新型号) (ISO 9939:1994)
|
Aerospace - Pressure re-oiling connection (new type) (ISO 9939:1994)
|
| DIN V 14430-2004
|
消防.正压力泡沫系统和压缩气体泡沫系统
|
Fire fighting - Positive pressure foam systems and compressed air foam systems
|
| DIN V ENV 12108-2001
|
塑料管道系统.建筑物内人用冷热水压力管道安装指南
|
Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption; German version ENV 12108:2001
|
| DIN V ENV 1401-2-2000
|
非压力地下排水和污水管道用塑料管道系统.硬聚氯乙烯(PVC-U).第2部分:一致性评估指南
|
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity; German version ENV 1401-2:2000
|
| DIN V ENV 1852-2-2000
|
非压力地下排水和污水用塑料管道系统.聚丙烯.第2部分:一致性评估指南
|
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1852-2:2000
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com