5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




德国粒度标准(DIN grain size standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号 中文名称 英文名称
DIN 10765-1975 咖啡和咖啡制品的分析.磨碎焙炒咖啡粒度的测定.气流喷射筛分法 Analysis of coffee and coffee products; determination of particle size of ground roasted coffee, air-jet sieving method
DIN 18123-1996 建筑地基.勘探和试验.粒度分布的测定 Soil, investigation and testing - Determination of grain-size distribution
DIN 1996-14-1990 沥青的检验.由沥青中回收的矿物集料粒度组成的测定 Testing of asphalt; determination of grading of mineral aggregate recovered from asphalt
DIN 22018-1985 硬煤采矿原材料的勘测.用浮沉分析法测定粒度分布 Investigations of the raw material in hard-coal-mining determation of the particle-density-distribution by float-and-sink-analysis
DIN 22019-1-1985 硬煤采矿原料的勘测.筛分法测定大于20μm的粒度分布 Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 20 ?m by sieve-analysis
DIN 22019-2-1985 硬煤矿原材料调查.通过超声微粉筛分析测定<60μm粒度的分布 Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 60 m by ultrasonic-microsieve-analysis
DIN 23006-5-2005 选硬煤.选煤设备和工艺的评定.第5部分:粒度减小和分离 Preparation of hard coal - Assessment of preparation equipment and processes - Part 5: Size reduction and dissociation
DIN 52098-2005 集料试验方法.用湿筛法测定粒度分布 Aggregates test methods - Determination of particle size distribution by wet sieving
DIN 52115-2-1997 岩石粒度试验.冲击试验.第2部分:碎石冲击试验 Testing of aggregates - Impact test - Part 2: Impact test on ballast
DIN 53206-1-1972 颜料的检验.粒度分析.基本术语 Testing of pigments; particle size analysis, basic terms
DIN 53325-1974 皮革检验.用lastometer测定粒度膨胀能力和断裂力的球压试验 Testing of leather; ball compression test for determination of grain expansion capacity and the force of fracture with the lastometer
DIN 54407-2003 离子交换树脂的试验.树脂珠粒粒度分布的测定 Testing of ion exchange resins - Determination of bead size distribution
DIN 66111 Bb.1-1989 颗粒度分析.沉降分析.原理.离心力场中量测定的评定公式 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN 66111-1989 粒度分析.沉降分析.原理 Particle size analysis; sedimentation analysis; principles
DIN 66115-1983 粒度分析.在重力场中的沉降分析.吸移管法 Particle size analysis; sedimentation analysis in the gravitational field; pipette method
DIN 66116-1-1973 粒度分析.第1部分:重力场的沉降分析.沉积平衡 Particle size analysis; sedimentation analysis in the gravitational field, sedimentation balance
DIN 66118-1984 粒度分析.用空气分级法进行粒度分析.原理 Particle size analysis; size analysis by air classification; fundamentals
DIN 66119-1983 粒度分析.用重力逆流筛分机的风力分级法进行粒度分析 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
DIN 66120-1983 粒度分析.用离心逆流分粒器风力分级法进行粒度分析 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
DIN 66135-4-2004 粒度分析.用气体吸收法进行微孔分析.第4部分:根据Horvath-Kawazoe和Saito-Foley测定孔径分布 Particle size analysis - Micropore analysis by gas adsorption - Part 4: Determination of pore distribution according to Horvath-Kawazoe and Saito-Foley
DIN 66143-1974 粒度分布图形表示法.幂函数网格 Graphical representation of particle size distributions; power-function grid
DIN 66144-1974 粒度分布图形表示法.对数正态网格 Graphical representation of particle size distributions; log-normal grid
DIN 66145-1976 粒度分布图形表示法.RRSB网格 Graphical representation of particle size distributions; RRSB-grid
DIN 66161-1985 粒度分析.公式符号、单位 Particle size analysis; formula symbols, units
DIN 66165-1-1987 粒度分析.筛析.基本原理 Particle size analysis; sieve analysis; general principles
DIN 66165-2-1987 粒度分析.筛析.程序 Particle size analysis; sieve analysis; procedure
DIN CEN/TS 15149-1-2006 固体生物燃料.粒度分布的测定方法.第1部分:筛孔为3.15 mm及以上的振动筛选法 Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above; German version CEN/TS 15149-1:2006
DIN CEN/TS 15149-2-2006 固体生物燃料.粒度分布的测定方法.第2部分:筛孔为3.15 mm及以下的振动筛选法 Solid biofuels - Methods for the determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below; German version CEN/TS 15149-2:2006
DIN CEN/TS 15149-3-2006 固体生物燃料.粒度分布的测定方法.第3部分:回转筛选法 Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method; German version CEN/TS 15149-3:2006
DIN CEN/TS 15415-2007 固体回收燃料.用筛分法测定粒度分布 Solid recovered fuels - Determination of particle size distribution by screen method; German version CEN/TS 15415:2006
DIN EN 1015-1-2007 圬工用灰浆的试验方法.第1部分:测定粒度分布(筛析法) Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis); German version EN 1015-1:1998+A1:2006
DIN EN 12192-1-2002 混凝土构件的保护和检修用产品和系统.粒度分析.第1部分:预混合灰浆干成份的检验方法; 德文版本 EN 12192-1: Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar; German version EN 12192-1:2002
DIN EN 12192-2-1999 混凝土支承结构防护和维修用产品和系统.粒度分析.第2部分;聚合物粘合剂填料检验方法 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents; German version EN 12192-2:1999
DIN EN 12697-2-2007 沥青混合料.热混沥青的试验方法.第2部分:粒度分布的测定 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution; German version EN 12697-2:2002+A1:2007
DIN EN 12948-2003 石灰材料.用干湿筛选法测定粒度分布 Liming materials - Determination of size distribution by dry and wet sieving; German version EN 12948:2002
DIN EN 15428-2007 土壤改良剂和生长剂.粒度分布的测定 Soil improvers and growing media - Determination of particle size distribution; German version EN 15428:2007
DIN EN 451-2-1995 飞灰检验方法.第2部分:通过湿法筛选测定粒度 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994
DIN EN 481-1993 工作场所环境.测量空气中微粒粒度的定义 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
DIN EN 623-3-2003 高级工业陶瓷.单片陶瓷.总则和结构特性.第3部分:粒度和粒度分布测定(用线性截断法表征) Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method); German version EN 623-3:2001
DIN EN 725-5-2007 高级技术陶瓷.陶瓷粉末试验方法.第5部分:粒度分布测定 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution; German version EN 725-5:2007
DIN EN 932-2-1999 岩石粒度一般性能试验方法.第2部分:实验室试样挤压方法 Test for general properties of aggregates - Part 2: Methods for reducing laboratory samples; German version EN 932-2:1999
DIN EN 933-1-2006 集料的几何性能的试验.第1部分:粒度分布的测定.筛分法 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:1997 + A1:2005
DIN EN 933-2-1996 集料几何特性试验.第2部分:粒度分布测定.筛孔公称尺寸 Test for geometrical properties of aggregates - Part 2: Determination of particle size distribution; test sieves, nominal size of apertures; German version EN 933-2:1995
DIN EN 933-7-1998 岩石粒度几何特性试验.第7部分:贝壳含量测定.粗岩颗粒中贝壳含量百分比 Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998
DIN EN 933-9-1998 岩石粒度几何特性试验.第9部分:细粒评估.压甲蓝试验 Tests for geometrical properties of aggregates - Part 9: Assessment of fines; methylene blue test; German version EN 933-9:1998
DIN EN ISO 11125-2-1997 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第2部分:粒度分布测定 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997
DIN EN ISO 11127-2-1997 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第2部分:粒度分布测定 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997
DIN EN ISO 643-2003 钢.表观粒度的显微照相测定法 Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003
DIN ISO 10076-2001 金属粉末.用液体中重力沉淀和衰减测量测定粒度分布(ISO 10076:1991) Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991)
DIN ISO 13321-2004 粒度分析.相关光子光谱学 Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996)
DIN ISO 4497-1991 金属粉末.用干筛法测定粒度 Metallic powders; determination of particle size by dry sieving; identical with ISO 4497:1983
DIN ISO 6106-2006 磨料制品.超级磨料的磨料粒度的检验(ISO 6106-2005) Abrasive products - Checking the grit size of superabrasives (ISO 6106:2005)
DIN ISO 6344-1-2000 砂布.粒度分析.第1部分:粒度分布试验 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)
DIN ISO 6344-2-2000 涂层磨料.粒度分析.第2部分:肉眼可见磨料为P12至P220的粒度分布测定 Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998)
DIN ISO 6344-3-2000 砂布.粒度分析.第3部分:P240至P2500粗磨粒的粒度分布测定 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
DIN ISO 7708-1996 空气质量.卫生抽样用悬浮灰尘粒度分布定义 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)
DIN ISO 8130-1-2005 粉末涂料.第1部分:用筛分法测定粒度分布 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
DIN ISO 8130-13-2005 粉末涂料.第13部分:采用激光衍射的粒度分析 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
DIN ISO 8486-1-1997 粘合磨料.粒度分布测定和标识.第1部分:F4至F220磨粒 Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 (ISO 8486-1:1996)
DIN ISO 8486-2-1997 粘合磨料.粒度分布测定和标识.第2部分:F230至F1200磨粒 Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F1200 (ISO 8486-2:1996)
DIN ISO 9136-1-2006 磨料粒度.堆积密度的测定.粗磨粒(ISO 9136-1-2004) Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
DIN ISO 9136-2-2000 磨料粒度.堆积密度的测定.粗磨粒 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
DIN ISO 9137-1996 磨料粒度.毛细作用测定 Abrasive macrograins - Determination of capillarity (ISO 9137:1990)
DIN ISO 9138-1996 磨料粒度.取样和分割 Abrasive grains - Sampling and splitting (ISO 9138:1993)
DIN ISO 9276-1-2004 粒度分析结果的表示.第1部分:图形表示 Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998)
DIN ISO 9276-2-2006 粒度分析结果的表示.第2部分:平均粒度/直径和粒度分布的力矩的计算(ISO 9276-2-2001) Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001)
DIN ISO 9276-4-2006 粒度分析结果的表示.第4部分:分类过程的特性(ISO 9276-4-2001) Representation of results of particle size analysis - Part 4: Characterization of a classification process (ISO 9276-4:2001)
DIN ISO 9284-1996 磨料粒度.筛分试验机 Abrasive grains - Test-sieving machines (ISO 9284:1992)
DIN ISO 9285-1998 磨料粒度.电熔氧化铝的化学分析 Abrasive grains and crude - Chemical analysis of fused aluminium oxide (ISO 9285:1997)
DIN ISO 9286-1998 磨料粒度.碳化硅的化学分析 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:1997)
DIN ISO/TS 17892-4-2005 土工调查和试验.土壤的实验室试验.第4部分:粒度大小分布的测定 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004); German version CEN ISO/TS 17892-4:2004
编号 中文名称 英文名称

返回