5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




德国紧固件标准(DIN fastener standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号 中文名称 英文名称
DIN 267-13-2007 紧固件.技术规范.第13部分:在-200℃~700℃温度范围使用的具有特殊机械性能螺栓连接件用部件 Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C
DIN 267-2-1984 紧固件.交货技术条件.结构和尺寸精度 Fasteners; technical delivery conditions; design and dimensional accuracy
DIN 267-24-2007 紧固件.交货技术条件.第24部分:不带规定验证载荷值的螺母用硬度等级 Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values
DIN 267-26-2005 紧固件.技术规范.第26部分:螺栓连接件用锥形弹簧垫圈 Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections
DIN 267-27-2004 紧固件.带粘附层的钢制螺钉、螺栓和螺柱技术规范 Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications
DIN 267-28-2004 紧固件.第28部分:带压紧层的钢制螺钉、螺栓和螺柱.技术规范 Fasteners - Part 28: Steel screws, bolts and studs with locking coating; Technical specifications
DIN 267-29-1993 紧固件.在-200℃~+700℃温度范围使用的螺栓连接件的产品等级 Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
DIN 267-30-2001 紧固件.交货技术条件.第30部分:特性等级为10.9的米制滚丝螺钉 Fasteners - Technical delivery conditions - Part 30: Metric thread rolling screws of property class 10.9
DIN 267-6-1975 紧固件和类似零件.产品等级F的表面粗糙度和公差技术规范 Fasteners and similar parts; technical specifications, finishes and tolerances for product grade F
DIN 29895-1984 航空和航天.可选择的紧固件材料 Aerospace; alternative materials for fasteners
DIN 29895-2-1989 航空航天.可选择的紧固件材料.第2部分:实心铆钉 Aerospace; alternative materials for fasteners; solid rivets
DIN 3132-1984 肘节式紧固件.带短支撑板的凸出部 Toggle-type fasteners; salient, with short base plate
DIN 3133-1984 肘节式紧固件.带加长支撑板的凸出部 Toggle-type fasteners; salient; with elongated base plate
DIN 3134-1984 肘节式紧固件.带和不带锁紧孔 Toggle-type fasteners; with and without locking eye
DIN 34804-2002 紧固件.黑色表面的外观变化 Fasteners - Change of appearance of black surfaces
DIN 4000-160-2007 产品性能制表规划.第160部分:带内螺纹紧固件 Tabular layout of product properties - Part 160: Fasteners with external thread
DIN 4000-161-2007 产品性能制表规划.第160部分:带外螺纹紧固件 Tabular layout of product properties - Part 161: Fasteners with internal thread
DIN 43835-1971 指示仪表的固定.紧固件、壳体锥铆钉、安装配置 Fastening for indicating instruments; fastening component, cone-rivets at the case, mounting arrangement
DIN 48069-1-1977 架空电力线用无保护紧固件的双眼 Double eyes without protective fitting attachment, for overhead power lines
DIN 65151-2002 航空航天系列.横向负载条件下紧固件的锁定特性的动态试验(振动试验) Aerospace series - Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test)
DIN 65428-1987 航空航天.带凸头的紧固件用壁厚为0.25mm的衬套 Aerospace; sleeves; wall thickness 0,25 mm, for fasteners with protruding head
DIN 65429-2002 航空航天.凸头紧固件用壁厚为0.5mm的套筒 Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with protruding head
DIN 65430-2002 航空航天.埋头紧固件用壁厚为0.25mm的套筒 Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head
DIN 65431-2002 航空航天.埋头紧固件用壁厚为0.5mm的套筒 Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head
DIN 65433-2002 航空航天.带减径埋头的紧固件用壁厚为0.25mm套筒 Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head
DIN 65434-1987 航空航天.小埋头紧固件用壁厚为0.5mm的衬套 Aerospace; sleeves; wall thickness 0,5 mm, for fasteners with reduced countersunk head
DIN 65435-1989 航空航天.紧固件用衬套.技术规范 Aerospace; sleeves for fasteners; technical specification
DIN 65485-1993 航空航天.结构用紧固件.旋转的紧固件的机械特性.旋转的紧固件总成 Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly
DIN 65486-1993 航空航天.结构用紧固件.旋转紧固件的机械特性.压力密封型紧固件总成 Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight
DIN 65487-1993 航空航天.结构用紧固件.旋转紧固件.沉头螺桩 Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head
DIN 65488-1993 航空航天.结构用紧固件.旋转紧固件.安装尺寸 Aerospace; fasteners for structural application; rotary fasteners; installation dimensions
DIN 65489-1993 航空航天.结构和非结构用紧固件.旋转紧固件.沉头垫圈 Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer
DIN 65492-1993 航空航天.结构紧固件.旋转紧固件.紧固件插孔 Aerospace; fasteners for structural application; rotary fasteners; receptacle
DIN 65493-1993 航空航天.结构紧固件.旋转紧固件.压力密封式紧固件插孔 Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight
DIN 68163-1982 装配木托盘的紧固件.钉子 Fasteners for assembling timber pallets; nails
DIN 6885-1-1968 无锥形作用的传动型紧固件.平行键、键槽、深度型式 Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern
DIN 6885-2-1967 无锥形作用的传动型紧固件.机床用平行键、键槽、深度型式.尺寸和用途 Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and Application
DIN 6885-3-1956 无锥体作用的驱动式紧固件.浅插入型直销键.尺寸和用途 Drive Type Fastenings without Taper Action; Parallel Keys, Shallow Pattern, Dimensions and Application
DIN 6886-1967 锥度驱动应力型紧固件.斜键、键槽、尺寸和应用 Stressed-type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application
DIN 6887-1968 锥度驱动应力型紧固件.弯头斜键、键槽、尺寸和应用 Stressed-type Fastenings with Taper Action; Taper Keys with Gip Head, Keyways, Dimensions and Application
DIN 6888-1956 不带键锥度的传动式紧固件.半圆键.尺寸和应用 Drive Type Fastenings without Taper Action; Woodruff Keys, Dimensions and Application
DIN 6892-1998 无锥度连接的驱动式紧固件.直行键.计算和设计 Drive type fastenings without taper action - Parallel keys - Calculation and design
DIN 74361-2-1982 汽车和挂车的盘式车轮.柱螺栓定心的紧固件 Disc wheels for motor vehicles and trailers; fasteners for stud centring
DIN 74361-3-1979 汽车和挂车用辐板式车轮.第3部分:轮毂孔定心附件用尺寸和紧固件 Disc wheels for motor vehicles and trailers; dimensions and fasteners for attachment with centring on wheel bore
DIN 918 Bb.3-2005 紧固件.欧洲标准.综述 Fasteners - European Standards - Survey
DIN 918-1979 紧固件.术语.术语的拼写.缩写 Fasteners; Terminology; Spelling of terms; Abbreviations
DIN 969-1997 螺纹紧固件.轴向负荷疲劳试验.试验方法和试验结果评定 Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results
DIN CEN/TS 15087-2006 屋顶用已装粘土和混凝土嵌合瓦片的抗隆起性测定.机械紧固件的试验方法.德文版本CEN/TS 15087-2005 Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners; German version CEN/TS 15087:2005
DIN EN 10269 Berichtigung 1-2006 具有规定高温和/或低温性能的紧固件用钢和镍合金 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, German version EN 10269:1999 + A1:2006, Corrigenda to DIN EN 10269:2006-07; German version EN 10269:1999/A1:2006/AC:2006
DIN EN 10269 Berichtigung 2-2007 专用高温和/或低温性能的紧固件用钢和镍合金 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:1999 + A1:2006, Corrigenda to DIN EN 10269:2006-07
DIN EN 10269-2006 具有规定高温和/或低温性能的紧固件用钢和镍合金(包括修改件A1-2006和技术勘误Ber 1-2006-10 + Ber 2-2007- Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (includes Amendment A1:2006 and Corrigenda Ber 1:2006-10 + Ber 2:2007-02); English version of DIN EN 10269:2006-07
DIN EN 1075-2000 木质构件.试验方法.金属板冲压紧固件连接接头 Timber structures - Test methods - Joints made with punched metal plate fasteners; German version EN 1075:1999
DIN EN 12512-2005 木结构.试验方法.机械紧固件接头的循环试验 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners; German version EN 12512:2001 + A1:2005
DIN EN 12549-1999 声学.紧固件安装工具的噪声测试规范.工程法 Acoustics - Noise test code for fastener driving tools - Engineering method; German version EN 12549:1999
DIN EN 13271-2004 木制紧固件.连接件滑动模数和特性承载力 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints; German version EN 13271:2001 + AC:2003
DIN EN 13446-2002 木基板材.紧固件拔出能力的测定; 德文版本 EN 13446:2002 Wood-based panels - Determination of withdrawal capacity of fasteners; German version EN 13446:2002
DIN EN 1382-2000 木结构.试验方法.木制紧固件的抗拔出力.德文版本EN1382-1999 Timber structures - Test methods - Withdrawel capacity of timber fasteners; German version EN 1382:1999
DIN EN 1383-2000 木结构.试验方法.木制紧固件的楔入阻力 Timber structures - Test methods - Pull through resistance of timber fasteners; German version EN 1383:1999
DIN EN 1414-2000 接触锁紧紧固件.后续试验的循环过程(包括补充件A1,2000) Touch and close fasteners - Cycling procedure for subsequent testing (includes Amendment A1:2000); German version EN 1414:1996 + A1:2000
DIN EN 14250-2005 木制结构.装配有穿孔金属板紧固件的预制结构构件的生产要求 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners; German version EN 14250:2004
DIN EN 14831-2005 紧固件.上紧性能.扭矩/角度简化试验法 Fasteners - Tightening performance - Torque/Angle simplified test method; German version EN 14831:2005
DIN EN 20225-1992 紧固件.螺钉、螺柱和螺母.尺寸符号和标示(ISO 225-83) Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
DIN EN 20273-1992 紧固件.螺栓和螺钉的间隙孔(ISO 273-1979) Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
DIN EN 20898-2-1994 紧固件的机械性能.第2部分:有规定检验载荷值的螺母.粗牙螺纹 Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993
DIN EN 20898-7-1995 紧固件的机械性能.第7部分:公称直径为 1 mm - 10 mm 的螺栓和螺钉的扭力试验和最小扭矩 (ISO 898-7:1992); Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
DIN EN 26157-1-1991 紧固件.表面缺陷.符合一般要求的螺栓、螺钉和螺柱(ISO 6157-1-88) Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
DIN EN 26157-3-1991 紧固件.表面缺陷.特殊要求用螺栓、螺钉和螺柱 Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN EN 26891-1991 木结构.用机械紧固件进行的连接.测定强度和变形特性的一般原理.(ISO 6891-83) Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991
DIN EN 28839-1991 紧固件的机械性能.有色金属制造的螺栓、螺钉、螺柱和螺母 Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
DIN EN 28970-1991 木结构.用机械紧固件连接的试验.对木材密度的要求(ISO 8970-88) Timber structures; testing of joints made with mechanical fasteners; requirements for wood density (ISO 8970:1989); german version EN 28970:1991
DIN EN 383-2007 木结构.试验方法.测定榫型紧固件的嵌入强度和基础参数 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners; German version EN 383:2007
DIN EN 4174-2006 航天航空系列.阳极电镀或铬酸盐处理铝合金2024米制系列、连接模压锁紧凹头紧固件 Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series; German and English version EN 4174:2006
DIN EN 50180 Bb.2-2001 充油变压器用1kV-36kV及250A-3.15kA衬套.结构紧固件 Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of fastening
DIN EN 792-1-2001 手持非电动工具.安全要求.第1部分:非螺纹机械紧固件的装配动力工具 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners; German version EN 792-1:2000
DIN EN 792-13-2001 手持非电动工具.安全性要求.第13部分:紧固件扳拧工具 Hand-held non electric power tools - Safety requirements - Part 13: Fastener driving tools; German version EN 792-13:2000
DIN EN 792-6-2001 手持非电动工具.安全要求.第6部分:螺纹紧固件用装配动力工具 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners; German version EN 792-6:2000
DIN EN 912-2001 木构件紧固件.木构件的连接件规范(包括勘误AC-2000) Timber fasteners - Specifications for connectors for timber (includes corrigendum AC:2000); German version EN 912:1999 + AC:2000
DIN EN ISO 10683-2001 紧固件.非电解用锌片覆层 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2000); German version EN ISO 10683:2000
DIN EN ISO 10684-2004 紧固件.热浸镀锌涂层 Fasteners - Hot dip galvanized coatings (ISO 10684:2004); German version EN ISO 10684:2004
DIN EN ISO 10964-1997 粘合剂.螺纹紧固件上厌氧粘合剂抗扭强度测定 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993); German version EN ISO 10964:1997
DIN EN ISO 1120-2002 传送带.机械紧固件强度测定.静态试验方法 (ISO 1120:2002); 德文版本 EN ISO 1120:2002 Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002); German version EN ISO 1120:2002
DIN EN ISO 12777-1-1996 托盘连接件试验方法.第1部分:托盘用钉子、其它榫钉型紧固件和U形钉的抗弯曲测定 Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994); German version EN ISO 12777-1:1996
DIN EN ISO 15330-2000 紧固件.检测氢脆用预荷载试验.平行支承面法 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999
DIN EN ISO 16047-2005 紧固件.扭矩/夹持力试验 Fasteners - Torque/clamp force testing (ISO 16047:2005); German version EN ISO 16047:2005
DIN EN ISO 16048-2003 耐腐蚀不锈钢紧固件的钝化处理 Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003
DIN EN ISO 16426-2003 紧固件.质量保证体系 Fasteners - Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002
DIN EN ISO 3269-2000 紧固件.验收检查 Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000
DIN EN ISO 3506-1-1998 耐蚀钢紧固件的机械性能.第1部分:螺栓,螺钉和螺柱 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997
DIN EN ISO 3506-2-1998 耐蚀钢紧固件的机械特性.第2部分:螺母 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997
DIN EN ISO 3506-3-1998 耐蚀钢紧固件的机械特性.第3部分:不受拉应力的止动螺钉和类似的紧固件 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997
DIN EN ISO 3506-4-2003 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003
DIN EN ISO 4042-2001 紧固件.电镀层(ISO 4042:1999) Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999
DIN EN ISO 4753-2000 紧固件.ISO米制外螺纹零件末端 Fasteners - Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999
DIN EN ISO 4759-1-2001 紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A、B和C Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
DIN EN ISO 4759-3-2000 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
DIN EN ISO 6157-2-2004 紧固件.表面缺陷.第2部分:螺母 Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
DIN EN ISO 898-1-1999 碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺钉和螺柱 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
DIN EN ISO 898-5 Berichtigung 1-2007 碳钢和合金钢制紧固件机械性能.第5部分:非拉伸应力条件下固定螺钉和类似紧固件 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10
DIN EN ISO 898-5-1998 碳钢和合金钢制紧固件的机械性能.第5部分:非拉伸应力条件下止动螺钉和类似的紧固件 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998
DIN EN ISO 898-6-1996 紧固件机械性能.第6部分:带规定试验负荷的螺母.细牙螺纹 Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995
DIN ISO 1891-1979 紧固件.螺栓、螺钉、螺母和附件.术语和名称 Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
DIN ISO 272-1979 紧固件.六角制件的对边宽度 Fasteners; Width across Flats for Hexagon Products
DIN ISO 4095-1980 航空和航天.宇航结构用紧固件.双六角(12角)扳手外形 Aerospace; fasteners for aerospace construction, bi-hexagonal wrenching configuration
DIN ISO 5845-1-1997 技术图样.紧固件组装简化表示法.第1部分:一般原理 Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995)
DIN ISO 5845-2-1997 技术图样.紧固件组装简化表示法.第2部分:航空航天设备用铆钉 Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment (ISO 5845-2:1995)
DIN ISO 7913-1986 航空和航天.紧固件.螺栓和螺钉的形状和位置公差.等同采用 ISO 7913-1986 Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
DIN ISO 8788-1988 航空航天.紧固件.螺母的形状和位置公差 Aerospace; fasteners; tolerances of form and position for nuts; identical with ISO 8788, edition 1987
DIN ISO 8992-2005 紧固件.螺栓、螺钉、螺柱和螺母的一般要求 Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
编号 中文名称 英文名称

返回