| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 25150-1990
| 有轨车辆.车厢内部.车辆清洁度的设计要求
| Rail vehicles; interior; design requirements for cleaning
|
| DIN 25410-2001
| 核设施.元件表面清洁度
| Nuclear facilities - Surface cleanliness of components
|
| DIN 38402-30-1998
| 德国对水.废水和淤泥的统一检验方法.总则(A组).第30部分:非均质水试样预处理、调匀和等分
| German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 30: Pretreatment, homogenization and aliquotation of non-homogeneous water samples (A 30)
|
| DIN 4261-1-2002
| 小型污水处理厂.第1部分:废水预处理厂
| Small sewage treatment plants - Part 1: Plants for waste water pretreatment
|
| DIN 52455-1-2003
| 建筑业密封材料试验.粘合和膨胀试验.第1部分:标准气候、水或高温预处理
| Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water,or increased temperatures
|
| DIN 80200-1979
| 船舶制造用的钢制部件.表面预处理、厂内涂漆和底漆涂层的符号
| Steel components for shipbuilding; symbols for surface preparations, shop primers and priming coats
|
| DIN EN 12222-1997
| 鞋.鞋及其部件预处理和检验的标准大气条件
| Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear; German version EN 12222:1997
|
| DIN EN 12255-3-2001
| 污水处理厂.第3部分:预处理(包括技术勘误AC-2000)
| Wastewater treatment plants - Part 3: Preliminary treatment (includes corrigendum AC:2000); German version EN 12255-3:2000 + AC:2000)
|
| DIN EN 12921-1-2005
| 使用液体或蒸气的工业产品的表面清洁和预处理机器.第1部分:通用安全要求
| Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements; German version EN 12921-1:2005
|
| DIN EN 12921-2-2005
| 使用液体或蒸气的工业产品的表面清洁和预处理机器.第2部分:使用水基清洁液的机械安全
| Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids; German version EN 12921-2:2005
|
| DIN EN 12921-3-2005
| 使用液体或蒸气的工业产品的表面清洁和预处理机器.第3部分:使用易燃清洁液体的机械的安全
| Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids; German version EN 12921-3:2005
|
| DIN EN 12921-4-2005
| 利用液体或蒸汽的工业产品的表面清洁和预处理机器.第4部分:利用卤化溶剂的机械安全
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents; German version EN 12921-4:2005
|
| DIN EN 13507-2001
| 热喷涂.热喷涂金属部件和元件表面预处理
| Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2001
|
| DIN EN 13946-2003
| 水质.河床硅藻类常规取样和预处理的指导性标准
| Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers; German version EN 13946:2003
|
| DIN EN 14694-2005
| 防水用柔性薄板.车辆可通过的混凝土船桥甲板和其他混凝土表面的防水.预处理产生损坏后耐动态水压的测定
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment; German version EN 14694:2005
|
| DIN EN ISO 11125-1-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第1部分:取样
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
|
| DIN EN ISO 11125-2-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第2部分:粒度分布测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997
|
| DIN EN ISO 11125-3-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第3部分:硬度测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997
|
| DIN EN ISO 11125-4-1997
| 使用涂料及相关产品前钢材的预处理.喷丸金属磨料试验方法.第4部分:表观密度测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997
|
| DIN EN ISO 11125-5-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第5部分:有缺陷颗粒百分比和微结构的测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN ISO 11125-5:1997
|
| DIN EN ISO 11125-6-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第6部分:外来杂质的测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997
|
| DIN EN ISO 11125-7-1997
| 使用涂料及相关产品前钢材的预处理.喷丸金属磨料试验方法.第7部分:含水量测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997
|
| DIN EN ISO 11126-10-2005
| 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第10部分:铁铝石榴石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004
|
| DIN EN ISO 11126-6-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第6部分:炼铁炉渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997
|
| DIN EN ISO 11126-7-1999
| 涂装油漆和相关产品前钢基体的预处理. 非金属喷射清理磨料规范.第7部分:熔融氧化铝
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999
|
| DIN EN ISO 11126-8-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第8部分:橄榄石沙
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997
|
| DIN EN ISO 11126-9-2005
| 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第9部分:十字石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
|
| DIN EN ISO 11127-1-1997
| 涂装油漆和相关产品前钢基体的预处理.非金属喷射清理用磨料的试验方法.第1部分:抽样
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993); German version EN ISO 11127-1:1997
|
| DIN EN ISO 11127-2-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第2部分:粒度分布测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997
|
| DIN EN ISO 11127-3-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第3部分:表观密度的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993); German version EN ISO 11127-3:1997
|
| DIN EN ISO 11127-4-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第4部分:通过玻璃划痕试验评定硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993); German version EN ISO 11127-4:1997
|
| DIN EN ISO 11127-5-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第5部分:含水量测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993); German version EN ISO 11127-5:1997
|
| DIN EN ISO 11127-6-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第6部分:通过测量电导率测定水溶性杂质
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993); German version EN ISO 11127-6:1997
|
| DIN EN ISO 11127-7-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第7部分:水溶性氯化物的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993); German version EN ISO 11127-7:1997
|
| DIN EN ISO 14644-1-1999
| 洁净室和相关控制环境.第1部分:空气清洁度分级 (ISO 14644-1:1999); 德文版本 EN ISO 14644-1:1999
| Cleanroom and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999); German version EN ISO 14644-1:1999
|
| DIN EN ISO 8501-1 Bb.1-2002
| 使用涂料和相关产品前钢基材预处理.表面清洁度目视评定.对第1部分的参考性补充:不同磨料喷射清洁造成钢材表
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives (ISO 8501-1:1988/Suppl:1994); German version EN ISO 8501-1:2001/Supplement:2001 (Endorsement of EN ISO 8501-1:2001/Supplement:2001)
|
| DIN EN ISO 8501-1-2002
| 使用涂料和相关产品前钢基材预处理.表面清洁度目视评定.第1部分:未涂覆和彻底清除原有涂层后钢材的锈蚀等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:1988); German version EN ISO 8501-1:2001 (Endorsement of EN ISO 8501-1:2001 as German Standard)
|
| DIN EN ISO 8501-2-2002
| 使用涂料和相关产品前钢基材准备.表面清洁度目视评定.第2部分:原有覆层局部除去后钢基材准备等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994); German version EN ISO 8501-2:2001 (Endorsement of EN ISO 8501-2:2001 as German Standard)
|
| DIN EN ISO 8502-11-2006
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐的现场滴定测定方法(ISO 8502
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006); German version EN ISO 8502-11:2006
|
| DIN EN ISO 8502-12-2005
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第12部分:水溶性铁离子的现场滴定测定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003); German version EN ISO 8502-12:2004
|
| DIN EN ISO 8502-2-2006
| 使用油漆涂料和相关产品之前钢基材的清理处理.表面清洁度的评定试验.第2部分:已清洁的表面上氯化物的实验室
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005); German version EN ISO 8502-2:2005
|
| DIN EN ISO 8502-3-1999
| 使用油漆涂料和相关产品之前钢基材的清理处理.表面清洁度的评定试验.第3部分:为涂漆料而清理处理的钢表面上
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992); German version EN ISO 8502-3:1999
|
| DIN EN ISO 8502-4-1999
| 使用涂层材料前钢基材表面清理准备.表面清洁度评定检验.第4部分:涂层前凝露概率估算指南
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993); German version EN ISO 8502-4:1999
|
| DIN EN ISO 8502-5-2005
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第5部分:涂装前钢材表面上氯化物测定(离子探测管法)
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998); German version EN ISO 8502-5:2004
|
| DIN EN ISO 8502-8-2005
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第8部分:水分的现场折射测定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture (ISO 8502-8:2001); German version EN ISO 8502-8:2004
|
| DIN EN ISO 8502-9-2001
| 使用涂料和有关产品前钢底材的制备.表面清洁度评定试验.第9部分:水溶性盐热导测定的现场方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998); German version EN ISO 8502-9:2000
|
| DIN EN ISO 8503-5-2005
| 涂装油漆和有关产品前钢材预处理.喷砂清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003); German version EN ISO 8503-5:2004
|
| DIN EN ISO 9692-2-1999
| 焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊（ISO 9692-2-1998,包括技术勘误AC-1999)
| Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998, includes Corrigendum AC:1999); German version EN ISO 9692-2:1998 + AC:1999
|
| DIN ISO 11464-1996
| 土质.理化分析试样预处理
| Soil quality - Pretreatment of samples for physico-chemical analysis (ISO 11464:1994)
|
| DIN ISO 14507-2004
| 土壤质量.有机污染物测定用样品的预处理
| Soil quality - Pretreatment of samples for determination of organic contaminants (ISO 14507:2003)
|
| DIN ISO 16720-2005
| 土质.连续分析用试样的冻干法预处理
| Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005)
|
| DIN ISO 98-2001
| 纺织机械和附件.纺前预处理机械和纺纱机械.上罗拉的包纱主要尺寸
| Textile machinery and accessories - Spinning preparatory and machinery - Main dimensions of coverings for top rollers
|
| DIN VDE 0745-200-1992
| 涂漆和涂装用非可燃材料用静电手持喷涂设备规范
| Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing; german version EN 50059:1990
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com