| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 43264-1-1976
| 缩放仪碳素.第1部分:碳素与插口截面
| Pantograph carbons; carbons and socket-sections
|
| DIN 50449-1-1997
| 半导体工艺用材料的检验.通过红外线吸收测定Ⅲ-Ⅴ-连接半导体杂质含量.第1部分:砷化镓中的碳素
| Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 1: Carbon in gallium arsenide
|
| DIN 51909-1998
| 碳素材料的试验.线性热膨胀系数的测定.固体材料
| Testing of carbon materials - Determination of coefficient of linear thermal expansion - Solid materials
|
| DIN 51910-1997
| 碳素材料检验.耐压强度测定.固体
| Testing of carbon materials - Determination of compressive strength - Solid materials
|
| DIN 51911-1997
| 碳素材料试验.电流电压法测定比电阻.固体
| Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters
|
| DIN 51912-1998
| 碳素材料的试验.氢含量的测定.固体物质
| Testing of carbon materials - Determination of hydrogen content - Solid matters
|
| DIN 51913-2001
| 碳素材料检验.使用氦气比重瓶测定密度.固体材料
| Testing of carbon materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
|
| DIN 51914-1985
| 碳素材料检验.抗拉强度测定.固体材料
| Testing of carbon materials; determination of tensile strength; solid matters
|
| DIN 51915-1997
| 碳素材料试验.谐振法测定动力弹性模数.固体
| Testing of carbon materials - Determination of dynamic moduls of elasticity by the resonance method - Solid materials
|
| DIN 51916-1987
| 碳素材料的试验.夯实后表观密度的测定.固体材料
| Testing of carbon materials; determination of apparent density after tamping; solid materials
|
| DIN 51917-2002
| 碳素材料试验.洛氏硬度试验.布式硬度试验方法.固体材料
| Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
|
| DIN 51925-1996
| 碳素材料试验.含碳捣实材料试样的备制和体积密度的测定.固体粘接剂和浸渍剂
| Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
|
| DIN 51926-1997
| 碳素材料试验.通过定量图像分析测定粘结剂中介晶相含量.粘结剂和浸渍剂
| Testing of carbon materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
|
| DIN 51937-1994
| 碳素材料检验.各向异性度测定.固体材料
| Testing of carbon materials; determination of anisotropy degree; solid materials
|
| DIN 51938-1994
| 碳素材料试验.通过筛分测定颗粒大小分配.固态物质
| Testing of carbon materials; determination of particle size distribution by sieving; solid matters
|
| DIN 51939-2004
| 碳素材料检验.煅烧焦碳中浮动焦碳成分的测定.固体材料
| Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
|
| DIN 51940-1992
| 碳素材料的试验.取样和样品制备.固体材料.固定粘接剂和浸渍剂
| Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
|
| DIN 51941-1-1994
| 碳素材料的试验.化学成分的测定.第1部分:分析备制.固体材料.牢固粘接剂和浸渍剂
| Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
|
| DIN 51942 Berichtigung 1-2006
| 碳素材料试验.采用脉冲激励法测定动态弹性模量.固体材料.DIN 51942-2002-03勘误
| Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
|
| DIN 51944 Berichtigung 1-2006
| 碳素材料的试验.四点法测定弯曲强度.固体材料.DIN 51944-1999勘误
| Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigenda to DIN 51944:1999-01
|
| DIN 51944-1999
| 碳素材料的试验.四点法测定弯曲强度.固体材料
| Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
|
| DIN 65147-1-1987
| 航空航天.碳素纤维.碳素纤维长丝织物.尺寸、质量
| Aerospace; carbon fibres; fabric of carbon fibre filament yarn; dimensions, masses
|
| DIN 65564-1992
| 航空航天.增强纤维.用HPLC法对碳素长丝纱、织物和短切原丝的浆成份进行定性测定
| Aerospace; reinforcement fibres; qualitative determination of size constituents of carbon filament yarns, woven fabrics and chopped strands by HPLC
|
| DIN 65565-1992
| 航空航天.增强纤维.用红外分光法对碳素长丝纱、织物和短切原丝的浆类型进行定性试验
| Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy
|
| DIN 65566-1992
| 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的浆含量的测定
| Aerospace; reinforcement fibres; determination of size content of carbon filament yarns, woven fabrics and chopped strands
|
| DIN 65568-1992
| 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的耐热氧化性能的测定
| Aerospace; reinforcement fibres; determination of thermal oxidative resistance of carbon filament yarns, woven fabrics and short cuts
|
| DIN EN 13293-2003
| 可运输的储气瓶.压缩、液化和不溶性气体用水容量不超过0.5升以及二氧化碳用水容量不超过1升的可反复灌装可
| Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide; German version EN 13293:2002
|
| DIN EN 2561-1995
| 航空航天系列.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验; 德文版本 EN 2561:1995
| Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995
|
| DIN EN 723-1996
| 铜和铜合金.燃烧法测定铜管或管件内表面碳素的方法
| Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings; German version EN 723:1996
|
| DIN EN ISO 2566-1-1999
| 钢.断裂伸长值的换算.第1部分:碳素钢和低合金钢（ISO 2566-1-1999)
| Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984); German version EN ISO 2566-1:1999
|
| DIN ISO 12980-2006
| 铝生产用碳素材料.电极用生焦和煅烧焦.X射线荧光分析法(ISO 12980-2000)
| Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method (ISO 12980:2000) |
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com