| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 11751-1989
| 农用拖拉机和机械.拖挂车用液压筒(200巴).连接尺寸
| Agricultural tractors and machinery; hydraulic cylinders for trailers; connecting dimensions
|
| DIN 14751-4-2002
| 消防队用液压操作救援器械.第4部分: 带综合泵和/或电源的双重作用的液压式救援器械
| Hydraulically operated rescue apparatus for fire brigade use - Part 4: Double acting hydraulic rescue tools with integrated pump and/or power source
|
| DIN 14751-5-2004
| 消防队用液压救生工具.第5部分:单作用力液压救生工具
| Hydraulically operated rescue tools for fire brigade use - Part 5: Single acting hydraulic rescue tools
|
| DIN 14800-6-2004
| 消防车和救援服务车用消防技术装备.第6部分:带单作用力液压臂的液压起重设备
| Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 6: Hydraulic lifting equipment with single acting hydraulic rams
|
| DIN 15430-1989
| 动力传动设备.电动液压的升降设备.尺寸和技术要求
| Power transmission engineering; electrohydraulic lifting appliances; dimensions and technical requirements
|
| DIN 18157-1-1979
| 采用稀灰浆垫料工艺制作陶瓷衬里.第1部分:液压灰浆
| Execution of ceramic linings by thin mortar bed technique; hydraulic mortar
|
| DIN 18506-2002
| 液压道路粘结剂.组分、规范和符合性准则
| Hydraulic road binders - Composition, specifications and conformity criteria
|
| DIN 19682-8-1972
| 农业工程用土壤探查方法.第8部分:野外试验.采用螺旋钻孔法对液压渗透性的测定
| Methods of soil investigations for agricultural engineering; field tests, determination of the hydraulic conductivity by auger hole method
|
| DIN 19683-9-1998
| 农业工程中土壤调查研究方法.物理实验室试验.第9部分.圆柱形钻芯－刀具的饱和液压水导电性的测定
| Methods of soil investigations for agricultural engineering - Physical laboratory tests - Part 9: Determination of the saturated hydraulic water conductivity in the cylindrical core-cutter
|
| DIN 19704-1-1998
| 钢制液压结构件.第1部分:设计和计算准则
| Hydraulic steel structures - Part 1: Criteria for design and calculation
|
| DIN 19704-2-1998
| 钢制液压结构件.第2部分:设计和制造
| Hydraulic steel structures - Part 2: Design and manufacturing
|
| DIN 19704-3-1998
| 钢制液压结构件.第3部分:电气设备
| Hydraulic steel structures - Part 3: Electrical equipment
|
| DIN 20021-1997
| 液压系统.带衬里的软管.DIN EN 853至DIN EN 857的补充件
| Fluid-systems - Hoses with layer - Completation for DIN EN 853 to DIN EN 857
|
| DIN 20043-2003
| 液压传动循环管路用U形锁扣连接件
| Staple-lock couplings for hydraulic power-transmission circuits
|
| DIN 20044-2003
| 液压动力传输管路用S型钩环锁定联接器.尺寸、要求和试验
| Staple-lock couplings type S for hydraulic power-transmission circuits - Dimensions, requirements, testing
|
| DIN 24080-1979
| 运土机械.液压式缆索传动挖土机.挖土机:术语
| Earth-moving Machinery; Hydraulic Excavators Cable-operated, Excavators; Terms
|
| DIN 24087-1979
| 土方机械.液压挖土机的可靠性测定.安全要求
| Earth Moving Machinery; Determination of Stability of Hydraulic Excavators Safety Requirements
|
| DIN 24311-1992
| 液压流体动力.比例控制阀和伺服阀.定义、符号和单位
| Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
|
| DIN 24312-1985
| 液压系统和元件.压力、量值、术语
| Fluid power systems and components; pressure; quantities, terms
|
| DIN 24320-1986
| 耐燃液压油.HFAE级.性能和要求
| Fire resistant fluids; group HFAE, characteristics, requirements
|
| DIN 24331-1972
| 液压流体力学.液压泵和液压马达、几何排量-容量、流量
| Oilhydraulic; hydraulic pumps and hydraulic engines, geometrical displacement-volume, rates
|
| DIN 24333-1979
| 液压.250巴液压缸.安装尺寸
| Fluidpower; hydraulic cylinder 250 bar, mounting dimensions
|
| DIN 24336-1980
| 流体动力.100巴液压缸.安装尺寸
| Fluidpower; hydraulic cylinder 100 bar, mounting dimensions
|
| DIN 24337-2001
| 液压动力.旋转头.尺寸、要求
| Fluid power - Rod end plain eyes - Dimensions, requirements
|
| DIN 24338-2001
| 液压动力.宽铰节轴承铰节头.尺寸、要求
| Fluid power - Rod end spherical eyes - Dimensions, requirements
|
| DIN 24339-1993
| 流体动力.钢制液压容器.尺寸、要求和试验方法.公称容量63至1250
| Fluid power; hydraulic reservoirs made of steel; dimensions, requirements, test methods; nominal capacity 63 to 1250
|
| DIN 24340-2-1982
| 液压阀.换向阀用安装面和连接板
| Hydraulic valves; mounting surfaces and connecting plates for directional control valves
|
| DIN 24343-1982
| 液压传动系统和元件.液压设备的维护及检查细目表
| Hydraulic fluid power systems and components; list for attendance and inspection of hydraulic equipments
|
| DIN 24346-1984
| 液压传动.液压系统.应用的一般规则
| Hydraulic fluid power - hydraulic systems; general rules for application
|
| DIN 24550-3-1992
| 流体动力:管线内过滤器用液压过滤器元件.包洛面尺寸
| Fluid power; hydraulic filter elements for inline filters; envelope dimensions
|
| DIN 24550-4-1992
| 流体动力:罐顶回油过滤用液压过滤器元件.包洛面尺寸
| Fluid power; hydraulic filter elements for tank top return-line filters; envelope dimensions
|
| DIN 24550-5-1992
| 流体动力:液压过滤器:悬挂式回油过滤器安装尺寸
| Fluid power; hydraulic filters; tank top return-line filter fitting dimensions
|
| DIN 24550-6-1999
| 流体动力.液压过滤器.第6部分:检验过滤器外壳.尺寸
| Fluid power - Hydraulic filters - Part 6: Test filter housings; dimensions
|
| DIN 24550-8-1999
| 流体动力.液压过滤器.第8部分:离心式过滤器.过滤器和连接尺寸
| Fluid power - Hydraulic filters - Part 8: Spin-on filters; filter and connection dimensions
|
| DIN 24552-1990
| 液压流体动力.液压系统的液压蓄能器.概念和一般要求
| Hydraulic fluid power; accumulators in hydraulic systems; concepts, general requirements
|
| DIN 24554-1990
| 流体动力.160巴紧密式液压缸.安装尺寸
| Fluidpower; hydraulic cylinder 160 bar compact; mounting dimensions
|
| DIN 24564-1-1995
| 液压系统和元件.第1部分:特性
| Fluid power systems and components - Part 1: Characteristics
|
| DIN 24564-2-2003
| 液压系统和元件.液压系统用元件.第2部分:液压缸用电位置传感器的特性
| Fluid power systems and components - Components for hydraulic sytems - Part 2: Characteristics of electrical position transducers for hydraulic cylinders
|
| DIN 24567-1998
| 液压.圆形蓄压钢瓶.尺寸、要求、试验方法.额定容积1000-20000
| Fluid power - Round hydraulic reservoirs made of steel - Dimensions, requirements, test method - Nominal capacity 1000 to 20000
|
| DIN 24950-1-1978
| 第1部分:液压和气动软管组件术语
| Oilhydraulic and pneumatic; terms for hose assemblies
|
| DIN 2781-1990
| 机床.液压机的45°单头锯齿螺纹
| Machine tools; buttress thread 45°, single start, for hydraulic presses
|
| DIN 30732-1-1987
| 都市车辆用液压系统.第1部分:设有两套系统的冬用车辆
| Hydraulic systems for municipal vehicles; winter service vehicles with 2 hydraulic systems
|
| DIN 31653-1-1991
| 滑动轴承.稳定工作条件下液压滑动止推轴承.垫片止推轴承计算
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of pad thrust bearings
|
| DIN 31653-2-1991
| 滑动轴承.稳定工作条件下液压滑动止推轴承.垫片止推轴承计算函数
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of pad thrust bearings
|
| DIN 31653-3-1991
| 滑动轴承.稳定工作条件液压滑动止推轴承.垫片止推轴承计算用允许运算参数
| Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings
|
| DIN 31657-1-1996
| 滑动轴承.稳定工作状态液压径向滑动轴承.第1部分:多层轴承和斜垫止推滑动轴承计算
| Plain bearings - Hydrodynamic plain journal bearings under steadystate conditions - Part 1: Calculation of multi-lobed and tilting pad journal bearings
|
| DIN 31657-2-1996
| 滑动轴承.稳定工作状态液压径向滑动轴承.第2部分:多层滑动轴承计算函数
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of multilobed journal bearings
|
| DIN 31657-3-1996
| 滑动轴承.稳定工作状态液压径向滑动轴承.第3部分:斜垫止推滑动轴承计算用函数
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Functions for calculation of tilting pad journal bearings
|
| DIN 3771-4-1984
| 液压系统.Ｏ型密封圈.质量验收准则
| Fluid systems; O-rings; quality acceptance criteria
|
| DIN 3771-5-1993
| 液压系统.O型圈.计算方法和安装空间尺寸
| Fluid systems; O-rings; methods for calculation and dimensions of housings
|
| DIN 45635-26-1979
| 机器空气噪声的测量.包络面法.液压泵
| Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps
|
| DIN 45635-41 Bb.1-1986
| 机器排放的噪声测量.空气传播的噪声.第41 Bb.1部分:包洛面法.液压组件(试验报告样表)
| Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form)
|
| DIN 45635-41-1986
| 机器排放的噪声测量.空气传播的噪声.第41部分:包洛面法.液压组件
| Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies
|
| DIN 48083-3-1985
| 压力连接件用压力机模具.标称压力为300、450 和1000KN以下的液压机.尺寸
| Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
|
| DIN 51308-2005
| 建筑中应用和测量力用辅助装置的验证.夹紧装置、液压缸、夹紧工具用功率计
| Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim
|
| DIN 51345-1986
| 耐火液压液体和金属的相容性试验
| Testing the compatibility of fire-resistant hydraulic fluids with metals
|
| DIN 51389-1-1982
| 润滑剂的测定.叶片泵液压流体的机械检验.第1部分:一般工作原则
| Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles
|
| DIN 51389-2-1982
| 润滑剂的测定.叶片泵液压流体的机械检验.第2部分:无水液压流体的 A 方法
| Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids
|
| DIN 51389-3-1998
| 润滑剂的检测.叶轮泵中液压流体的机械试验.第3部分:含水不易燃液压流体的B试验方法
| Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids
|
| DIN 51524-1-2006
| 压力液体.液压油.第1部分:HL液压油.最低要求
| Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements
|
| DIN 51524-2-2006
| 压力液体.液压油.第2部分:HLP液压油.最低要求
| Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements
|
| DIN 51524-3-2006
| 压力液体.液压油.第3部分:HLP液压油.最低要求
| Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements
|
| DIN 53769-2-1986
| 玻璃纤维增加塑料管道检验.长期静液压试验
| Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
|
| DIN 55189-2-1988
| 机床.静态负荷下板金加工冲压参数的测定.第2部分:液压机
| Machine tools; determination of the ratings of presses for sheet metal working under static load; hydraulic presses
|
| DIN 65385-1991
| 航空航天.液压流体动力..过滤器元件.试验数据报告
| Aerospace; hydraulic fluid power; filter elements; reporting of test data
|
| DIN 74000-1992
| 液压制动装置.双回路制动装置.制动回路图的符号
| Hydraulic braking systems; dual circuit brake systems; symbols for brake circuits diagrams
|
| DIN 74075-1-1997
| 载重汽车和鞍式牵引机构液压联轴器.第1部分:液压联轴器要求
| Hydraulic couplings on lorries and semi-trailer towing vehicles - Part 1: Location of hydraulic couplings
|
| DIN 74200-1991
| 液压制动系统.液压缸.尺寸和安装说明
| Hydraulic braking systems; cylinders; dimensions, instructions for installation
|
| DIN 74225-1991
| 液压制动软管组件.制动用软管接头.制动软管夹
| Brake hose assemblies; brake hose fittings; brake hose clips
|
| DIN 74233-1-1991
| 液压制动系统.制动管道配件.第1部分:制动管道外用配件
| Hydraulic braking systems; fittings for brake pipes; male fittings for brake pipes
|
| DIN 74233-2-1991
| 液压制动系统.制动管道配件.第2部分:制动管道管接螺母
| Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes
|
| DIN 74234-1992
| 液压制动系统.扩口的制动液压管
| Hydraulic braking systems; brake pipes, flares
|
| DIN 74235-1991
| 液压制动系统.螺纹孔
| Hydraulic braking systems; tapped holes
|
| DIN 8584-7-2003
| 在拉伸和加压复合条件下复合成形的制造工艺.第7部分:液压成形加宽.分类、细类、术语和定义
| Manufacturing processes forming under combination of tensile and compressive conditions - Part 7: Hydroforming widening; Classification, subdivision, terms and definitions
|
| DIN EN 10246-2-2000
| 钢管的无损检验.第2部分:证明液压渗漏密封性的无缝和焊接(埋弧焊接除外)的奥氏体和铁素体/奥氏体钢管的自动
| Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:2000
|
| DIN EN 10275-1999
| 金属材料.管环液压压力试验
| Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
|
| DIN EN 10305-4-2003
| 精密装置用钢管.交货技术条件.第4部分:液压和气动系统用无缝冷拉管
| Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-4:2003
|
| DIN EN 10305-6-2005
| 精密仪器用钢管.交货技术条件.第6部分:液压和气动动力系统用焊接冷拉管材
| Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-6:2005
|
| DIN EN 12107-1997
| 塑料管道系统.注塑热塑性塑料配件、阀门和附件.注塑热塑材料管件持久静液压强度的测定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
|
| DIN EN 12162-2001
| 液体泵.安全要求.静液压试验过程
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing; German version EN 12162:2001
|
| DIN EN 12312-19-2005
| 飞行器地面支持设备.特殊要求.第19部分:飞行器架、轴架和液压尾翼支柱
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions; German version EN 12312-19:2005
|
| DIN EN 12332-2-2003
| 橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method; German version EN 12332-2:2002
|
| DIN EN 12622-2001
| 机床.机床安全性.液压制动器
| Machine tools - Safety of machine tools - Hydraulic press brakes; German version EN 12622:2001
|
| DIN EN 12706-1999
| 胶粘剂.液压固化地板镘光和/或整平化合物的试验方法.流动性的测定
| Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics; German version EN 12706:1999
|
| DIN EN 12952-14-2004
| 水管锅炉和辅助设备.第14部分:使用液压氨和氨水溶液的废气DENOX系统的要求
| Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution; German version EN 12952-14:2004
|
| DIN EN 13204-2005
| 消防和救生服务用双动液压救生工具.安全和性能要求
| Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements; German version EN 13204:2004
|
| DIN EN 13242-2003
| 土木工程和道路建筑用非结合和液压结合材料用集料
| Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction; German version EN 13242:2002
|
| DIN EN 13408-2002
| 液压固化地板平整复合物试验方法.粘附拉伸强度测定
| Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength; German version EN 13408:2002
|
| DIN EN 13409-2002
| 液压固化地板平整复合物的试验方法.固化时间测定; 德文版本 EN 13409:2002
| Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time; German version EN 13409:2002
|
| DIN EN 13433-2006
| 防饮用水回流污染设备.液压驱动机械分离器.族G,A型
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A; German version EN 13433:2006
|
| DIN EN 13434-2006
| 防饮用水回流污染设备.液压驱动机械分离器.族G,B型
| Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B; German version EN 13434:2006
|
| DIN EN 13802-2005
| 铁路设施.悬挂部件.液压减震器
| Railway applications - Suspension components - Hydraulic dampers; German version EN 13802:2004
|
| DIN EN 13851-2004
| 液压楼层校平和/或水平层复合物的试验方法.抗弯曲及抗压强度的测定
| Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of flexural and compressive strength; German version EN 13851:2003
|
| DIN EN 1397-1999
| 热交换器.液压间风扇线圈装置.性能确定的试验方法
| Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance; German version EN 1397:1999
|
| DIN EN 14227-13-2006
| 液力粘结混合料.规范.第13部分:液压道路粘结剂处理的土壤
| Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder; German version EN 14227-13:2006
|
| DIN EN 14653-1-2005
| 土方工程支撑用手动液压支撑系统.第1部分:产品规范
| Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications; German version EN 14653-1:2005
|
| DIN EN 14653-2-2005
| 土方工程支撑用手动液压支撑系统.第2部分:通过计算或试验评定
| Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test; German version EN 14653-2:2005
|
| DIN EN 1487-2000
| 建筑物阀门.液压安全类.试验和要求
| Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000
|
| DIN EN 1777-2005
| 消防和救援设备用液压平台.安全要求和检验
| Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing; German version EN 1777:2004
|
| DIN EN 1804-1-2003
| 地下采矿机械.液压护顶支撑物安全性要求.第1部分:支撑装置和一般要求
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001
|
| DIN EN 1804-2-2003
| 地下采矿机械.液压顶棚支撑安全性要求.第2部分:动力装置的支柱和作动筒
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001
|
| DIN EN 1804-3-2006
| 地下采矿机械.液压顶棚支撑安全性要求.第3部分:液压控制系统
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; German version EN 1804-3:2006
|
| DIN EN 1937-1999
| 胶粘剂.液压固化地板镘光和/或整平化合物的检验方法.标准混合法
| Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures; German version EN 1937:1999
|
| DIN EN 2622-2003
| 航空航天系列.直径为3.2mm D 100mm的耐热合金液压圆形管.尺寸
| Aerospace series - Circular tubes, for fluids in heat resisting alloys, diameter 3,2 mmD100 mm - Dimensions; German and English version EN 2622:2001
|
| DIN EN 26802-1993
| 金属丝增强的橡胶和塑料软管组件.挠曲状态下液压脉冲试验
| Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993
|
| DIN EN 474-5-1996
| 土方机械.安全性.第5部分:液压挖掘机要求
| Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators; German version EN 474-5:1996
|
| DIN EN 50340-2002
| 液压电缆切割装置.标称电压为交流30kV以下的电气设备用装置
| Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV; German version EN 50340:2001
|
| DIN EN 62237-2005
| 带电作业.液压工具和设备用带配件的绝缘软管
| Live working - Insulating hoses with fittings for use with hydraulic tools and equipment (IEC 62237:2003, modified); German version EN 62237:2005
|
| DIN EN 752-4-1997
| 建筑物外部排水系统.第4部分:液压设计和对环境的考虑
| Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations; German version EN 752-4:1997
|
| DIN EN 773-1999
| 液压排水管道构件一般要求
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers; German version EN 733:1999
|
| DIN EN 81-2-2000
| 升降机建造和安装的安全规则.第2部分:液压升降机
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999
|
| DIN EN 81-2/A1-2006
| 电梯建造和安装的安全规则.第2部分:液压升降机.德文版本EN 81-2:1998/A1-2005
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; German version EN 81-2:1998/A1:2005
|
| DIN EN 81-2/A2-2005
| 升降机施工和安装的安全规则.第2部分:液压升降机.A2:机械和滑轮间隔
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces; German version EN 81-2:1998/A2:2004
|
| DIN EN 81-3-2001
| 升降机制造和安装安全规则.第3部分:电动升降机和液压升降机
| Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; German version EN 81-3:2000
|
| DIN EN 853-1997
| 橡胶软管和软管组件.带金属丝编织层的液压软管.规范
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996
|
| DIN EN 854-1997
| 橡胶软管和软管组件.带织物编织层的液压软管.规范
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996
|
| DIN EN 855-1997
| 塑料软管和软管组件.带织物编织层的塑料液压软管.规范
| Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996
|
| DIN EN 856-1997
| 橡胶软管和软管组件.带金属丝螺旋垫层的液压软管.规范
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996
|
| DIN EN 857-1997
| 橡胶软管和软管组件.带金属丝编织层的紧凑型液压软管.规范
| Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996
|
| DIN EN 911-1995
| 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头的连接.外部静力液压条件下的防漏试验方法;
| Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
|
| DIN EN 982-1996
| 机械安全性.液压系统 及其部件的安全要求.液压装置
| Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics; German version EN 982:1996
|
| DIN EN 983-1996
| 机械安全性.液压系统及其部件的安全要求.气动装置
| Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics; German version EN 983:1996
|
| DIN EN ISO 10592-1995
| 小型船舶.液压操纵系统 (ISO 10592:1994); 德文版本 EN ISO 10592:1995
| Small craft - Hydraulic steering systems (ISO 10592:1994); German version EN ISO 10592:1995
|
| DIN EN ISO 12922-2002
| 润滑剂、工业用油和相关产品(L级).H类(液压体系).HFAE、 HFAS、HFB、HFC、HFDR和HFDU的目录规范 (ISO 12922
| Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002
|
| DIN EN ISO 13938-1-1999
| 纺织品.织物破裂特性.第1部分:胀破强度和胀破力测定的液压方法
| Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999); German version EN ISO 13938-1:1999
|
| DIN EN ISO 1402-1996
| 橡胶和塑料软管及软管组件.液压静力试验
| Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996
|
| DIN EN ISO 19879-2005
| 液压传动和通用金属管连接.液压传动连接的试验方法
| Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2005); German version EN ISO 19879:2005
|
| DIN EN ISO 20763-2004
| 石油和相关产品.液压液耐磨性能的测定.叶片泵法
| Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004
|
| DIN EN ISO 4263-2-2003
| 石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:HFC类液压液测定规程
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for class HFC hydraulic fluids (ISO 4263-2:2003); German version EN ISO 4263-2:2003
|
| DIN EN ISO 4404-2-2003
| 石油和相关产品.难燃液压液抗腐蚀性的测定.第2部分:不含水液体
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003); German version EN ISO 4404-2:2003
|
| DIN EN ISO 5198-1999
| 离心泵、混流泵和轴流泵.液压性能试验规范.精密级
| Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987); German version EN ISO 5198:1998
|
| DIN EN ISO 6743-4-2002
| 润滑剂、工业用润滑油和相关产品(L类).分类.第4部分:H族(液压系统)
| Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001
|
| DIN EN ISO 6803-1997
| 橡胶和塑料软管及软管组件.无弯曲液压压力脉冲试验
| Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
|
| DIN EN ISO 8032-1999
| 橡胶和塑料软管组件.结合液压脉冲试验的软管弯曲试验(半Ω 型弯曲试验)
| Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
|
| DIN EN ISO 8434-1-1997
| 液压传动和通用连接件.第1部分:24度喇叭形压合接头
| Metallic tube connections for fluid power and general use - Part 1: 24° compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997
|
| DIN EN ISO 8434-4-2000
| 液压及通用金属管件连接.第4部分:接头焊有O形密封圈的24度锥体连接件
| Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
|
| DIN EN ISO 9080-2003
| 塑料管道和导管系统.用外推法测定热塑性塑料管材的长期静液压强度
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003); German version EN ISO 9080:2003
|
| DIN EN ISO 9906-2002
| 旋转式动力泵.液压性能验收试验.等级1和2 (ISO 9906:1999); 德文版本 EN ISO 9906:1999
| Rotodynamic pumps - Hydraulic performance acceptance test - Grades 1 and 2 (ISO 9906:1999); German version EN ISO 9906:1999
|
| DIN EN ISO 9974-2-2000
| 通用和液压传动用联接件.用ISO261弹性螺纹或金属与金属密封的气门和双头螺栓端头.第2部分:(E型)带弹性密封
| Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000
|
| DIN ISO 10448-1999
| 农用拖拉机.机具的液压系统
| Agricultural tractors - Hydraulic pressure for implements (ISO 10448:1994)
|
| DIN ISO 10627-2-1999
| 农用机械和拖拉机.农作物液压喷灌设备.第2部分:部件数据单
| Agricultural machinery and tractors - Hydraulic agricultural sprayers - Part 2: Data sheets for components (ISO 10627-2:1992)
|
| DIN ISO 10763-2004
| 液压传动.端面平齐的无缝和焊接型精密钢管.尺寸和标称工作压力
| Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994)
|
| DIN ISO 10766-1998
| 液压流体动力液压缸.活塞和连杆的矩形截面轴承环的壳体尺寸
| Hydraulic fluid power, cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996)
|
| DIN ISO 11217-1994
| 航空航天.液压系列流体污染物.取样点定位和取样准则
| Aerospace; hydraulic system fluid contamination; location of sampling points and criteria for sampling; identical with ISO 11217:1993
|
| DIN ISO 11218-1994
| 航空航天.液压流液污染度的分类
| Aerospace; cleanlinless classification for hydraulic fluids; identical with ISO 11218:1993
|
| DIN ISO 11471-1997
| 农用拖拉机和机具.遥控液压装置和控制装置编码
| Agricultural tractors and machinery - Coding of remote hydraulic power services and controls (ISO 11471:1995)
|
| DIN ISO 12151-2-2004
| 液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头
| Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
|
| DIN ISO 12151-3-2004
| 液压传动和通用连接件.软管接头.第3部分:带ISO 6162法兰末端的软管接头
| Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999)
|
| DIN ISO 1219-1-1996
| 液压传动系统和部件.图形符号和线路图.第1部分:图形符号
| Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols (ISO 1219-1:1991)
|
| DIN ISO 1219-2-1996
| 液压动力系统和部件.图形符号和线路图.第2部分:线路图
| Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2: Circuit diagrams (ISO 1219-2:1995)
|
| DIN ISO 12238-2005
| 液压传动.方向控制阀门.移动时间测量(ISO 12238-2001)
| Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
|
| DIN ISO 15171-1-2004
| 流体传动和一般用途管接头.诊断用液压管接头.第1部分:非压力下连接的管接头
| Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
|
| DIN ISO 15171-2-2004
| 流体传动和一般用途管接头.诊断用液压管接头.第2部分:带M12 2螺纹端的压力连接接头
| Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000)
|
| DIN ISO 15380-2004
| 润滑油、工业用油和相关产品(L级).H族(液压系统).HETG、HEPG、HEES和HEPR类规范说明
| Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002)
|
| DIN ISO 21287-2005
| 液压传动.储气瓶.1000 kPa (10 bar) 系列、 20 mm到 100 mm 内径的小型气瓶(ISO 21287-2004)
| Pneumatic fluid power - Cylinders - Compact cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004)
|
| DIN ISO 2941-1983
| 液压传动.滤芯.抗破裂性/爆破性检验
| Hydraulic fluid power; filter elements; verification of collapse/burst resistance
|
| DIN ISO 3019-1-2004
| 液压传动.容积泵和马达的安装法兰和轴伸的尺寸及标注代号.第1部分:用米制单位表示的英制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001)
|
| DIN ISO 3019-2-2004
| 液压传动.容积式泵和马达的安装法兰和轴伸的尺寸及标注代号.第2部分:米制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
|
| DIN ISO 3320-2001
| 液压系统和元件.缸径和活塞杆直径.米制系列
| Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987)
|
| DIN ISO 3322-2001
| 液压系统和元件.作动筒.公称压力
| Fluid power systems and components - Cylinders - Nominal pressures (ISO 3322:1985)
|
| DIN ISO 3323-1985
| 航空器..液压元件.表明液压元件已被批准适用油液的标志
| Aircraft; hydraulic components; marking to indicate fluid for which component is approved
|
| DIN ISO 3724-1990
| 液压流体动力.滤芯.流动疲劳特性的验证
| Hydraulic fluid power; filter elements; verification of flow fatigue characteristics; identical with ISO 3724:1976
|
| DIN ISO 3803-1990
| 道路车辆.制动设备的液压试验连接件
| Road vehicles hydraulic pressure test connection for braking equipment; identical with ISO 3803:1984
|
| DIN ISO 4391-1984
| 液压传动.泵、电动机和整体式传动装置.参数定义和字母符号
| Hydraulic fluid power; pumps, motors and integral transmissions; parameter definitions and letter symbols
|
| DIN ISO 4393-1984
| 液压传动系统和元件.缸.活塞行程的基本系列
| Fluid power systems and components; cylinders; basic series of piston strokes
|
| DIN ISO 4395-1985
| 液压传动系统和元件.汽缸.活塞杆螺纹尺寸和型式.等同采用ISO 4395-1985版本
| Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978
|
| DIN ISO 4409-1994
| 液压里动力.正排量泵、电动机和整体传动装置.静态稳定性的测定
| Hydraulic fluid power; positive displacement pumps, motors and integral transmissions; determination of steady-state performance; identical with ISO 4409:1986
|
| DIN ISO 4548-5-1993
| 内燃机.全流式机油滤清器的试验方法.冷起动模拟和液压脉冲耐久性试验
| Internal combustion engines; methods of test for full-flow lubricating oil filters; cold start simulation and hydraulic pulse durability test; identical with ISO 4548-5:1990
|
| DIN ISO 4926-1979
| 道路车辆.液压制动系统.非石油基基准液
| Road Vehicles; Hydraulic Brake Systems, Non-petroleum Base Reference Fluids
|
| DIN ISO 4928-1982
| 道路车辆.使用非石油基液压制动液的液压制动系统缸体的弹性罩和密封件(最大工作温度120℃)
| Road vehicles; elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
|
| DIN ISO 5597-1988
| 液压流体动力.液压缸.往复作用的活塞和活塞杆的密封腔.尺寸和公差
| Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
|
| DIN ISO 5884-1989
| 航空航天.流体系统和部件.液压流体中固体微粒污染的系统取样和测量方法
| Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
|
| DIN ISO 6020-1-2001
| 液压.16MPa(160 bar)系列单杆作动筒装配尺寸.第1部分:中型系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPA (160 bar) series - Part 1: Medium series (ISO 6020-1:1998)
|
| DIN ISO 6149-1-1996
| 液压传动连接和普通连接.油口和带ISO 261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内带O形环的油口
| Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing (ISO 6149-1:1993)
|
| DIN ISO 6149-3-1996
| 液压传动连接和普通连接.油口和带ISO 261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸、设
| Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993)
|
| DIN ISO 6162-1-2006
| 液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:压力为3.5MPa至35MPa(35巴至350巴)
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
|
| DIN ISO 6162-2-2006
| 液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第2部分:压力为35MPa至40MPa(350巴至400巴)
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
|
| DIN ISO 6195-1989
| 流体动力系统和组件.液压筒.往复作动用的刮垢环外罩.尺寸和公差
| Fluid power systems and components; cylinders; housings for rod wiper rings in reciprocating applications; dimensions and tolerances; identical with ISO 6195:1986
|
| DIN ISO 6547-1983
| 液压流体动力.装有轴承环的活塞密封壳体.尺寸和允公差
| Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
|
| DIN ISO 6772-1996
| 航空航天.流体系统.液压软管、管道和连接组件的脉冲试验 (ISO 6772:1988)
| Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988)
|
| DIN ISO 7181-2001
| 液压系统和元件.作动筒.缸筒和活塞杆截面比
| Hydraulic power systems and components - Cylinders - Bore and rod area ratios (ISO 7181:1991)
|
| DIN ISO 7368-1994
| 液压流体动力.两通口筒形插入阀.阀腔
| Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989
|
| DIN ISO 7425-1-1990
| 液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.活塞密封沟槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
|
| DIN ISO 7425-2-1990
| 液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.第2部分:活塞杆密封沟槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989
|
| DIN ISO 7632-1986
| 道路车辆.使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫件(最大工作温度120℃)
| Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.); identical with ISO 7632, edition 1985
|
| DIN ISO 789-10-1999
| 农用拖拉机和机械.拖拉机的试验程序.第10部分:机具的液压系统
| Agricultural tractors and machinery - Tractors; Test procedures - Part 10: Hydraulic pressure for implements (ISO 789-10:1996)
|
| DIN ISO 8426-1994
| 液压流体动力.正排量泵和电动机.推导容积的测定
| Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity; identical with ISO 8426:1988
|
| DIN ISO 8575-1998
| 航空航天.流体系统.液压系统管道
| Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990)
|
| DIN V ENV 13282-2002
| 液压道路粘合剂.组分、规范和一致性标准; 德文版本 ENV 13282:2000
| Hydraulic road binders - Composition, specifications and conformity criteria; German version ENV 13282:2000
|
| DIN-Fachbericht CEN/TR 14489-2006
| 耐火液压液.分类和规范.安全、健康和环境保护的选择指南
| Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment; German version CEN/TR 14489:2005
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com