| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 1495-1-1983
| 小功率电动机和功率小于37瓦的电动机用有满足特殊要求的烧结金属制滑动轴承.球面轴承.尺寸
| Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Spherical bearings; Dimensions
|
| DIN 1495-2-1983
| 小功率电动机和功率小于37瓦的电动机用有满足特殊要求的烧结金属制滑动轴承.圆柱轴承.尺寸
| Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Cylindrical bearings; Dimensions
|
| DIN 15560-104-2003
| 电影和电视演播厅、舞台和摄影用聚光灯.第104部分:额定功率不超过4000W的日光聚光灯系统和专用连接器
| Projectors for film and television studios, stage and photographic use - Part 104: Daylight projector systems up to 4000 W rated power and special connectors
|
| DIN 2218-1976
| 机械工程用环形三角皮带.传动力、额定功率的计算
| Endless V-belts for Mechanical Engineering; Calculation of Drives, Power Ratings
|
| DIN 25463-1 Bb.1-1990
| 轻水反应堆核燃料衰变热功率的计算.不回烧的核燃料.文献和图解
| Decay heat power in nuclear fuels of light water reactors; non-recycled nuclear fuels; documentation and illustration
|
| DIN 25463-1-1990
| 轻水反应堆核燃料衰变热功率的计算.不回烧的核燃料
| Decay heat power in nuclear fuels of light water reactors; non-recycled nuclear fuels
|
| DIN 41450-2-1987
| 电位计.低功率单转电位计术语、定义、特性和试验方法
| Potentiometers; single turn rotary potentiometers, low power; terms and definitions, characteristics, methods of test
|
| DIN 41751-1977
| 静态功率变流器.半导体变流器组件和设备.冷却方法
| Static power convertors; semiconductor convertor assemblies and equipments, cooling methods
|
| DIN 41756-1-1971
| 静态功率转换器.负载循环和额定等级
| Static power convertors; duty cycles and rating classes
|
| DIN 41756-2-1973
| 静态功率变流器.第2部分:直流负载型功率变流器能率
| Static power convertors; duty of power convertors, typers of d.c. load
|
| DIN 41756-3-1975
| 静态大功率整流器.第3部分:交流电负载型的大功率整流器负载量
| Static power convertors; duty of power convertors, types of a.c. load
|
| DIN 41762-2-1974
| 静态大功率整流器.第2部分:半导体整流器组和组件、单晶半导体整流器组和组件额定值代码标识
| Static power convertors; rating code designation for semiconductor convertor stacks and assemblies, monocrystalline semiconductor convertor stacks and assemblies
|
| DIN 41772 Bb.1-1979
| 静态功率转换器.半导体整流设备.蓄电池充电器特性曲线示例
| Static power convertors; semiconductor rectifier equipment, examples of characteristic curves for battery chargers
|
| DIN 41772 Bb.2-1979
| 静态功率转换器.半导体整流设备.与蓄电池并联运行的整流设备的特性曲线示例
| Static power convertors; semiconductor rectifier equipment, examples of characteristic curves for equipment operating in parallel with batteries
|
| DIN 41772-1979
| 静态功率转换器.半导体整流设备.特性曲线形状和字母符号
| Static power convertors; semiconductor rectifier equipment, shapes and letter symbols of characteristic curves
|
| DIN 41773-1-1979
| 静态功率变流器.第1部分:铅酸蓄电池滴流充电用具有 IU 特性的半导体整流器设备指南
| Static power convertors; semiconductor rectifier equipment with IU-characteristics for charging of lead-acid batteries, guidelines
|
| DIN 41773-2-1982
| 静态功率转换器.用于镍/镉蓄电池充电用具有IU特性曲线的半导体整流设备.要求
| Static power convertors; semiconductor rectifier equipment with IU characteristic for charging of nickel cadmium batteries; requirements
|
| DIN 41774-1987
| 静态功率转换器.铅酸蓄电池充电用具有W特性的半导体整流器设备.要求
| Static power convertors; semiconductor rectifier equipment with W-characteristic for charging of lead-acid batteries; requirements
|
| DIN 41777-1986
| 静态功率变流器.铅酸蓄电池滴流充电用半导体整流器设备
| Static power convertors; semiconductor rectifier equipment for trickle charging of lead-acid batteries
|
| DIN 41900-1968
| 额定电压1KV以上和额定功率0.2KVA以上的射频发射机电容器.
| Radio Frequency Transmitter Capacitors for rated voltages higher than 1 kV and rated powers higher than 0,2 kVA
|
| DIN 42500-4-1995
| 操作设备用最高电压不超过 36 kV 的 50Hz、50 kVA - 2500 kVA 的三相交流油浸式配电变压器.第4部分:非正弦
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA for equipment not exceeding 36 kV - Part 4: Determination of power rating of a transformer loaded with non-sinusoidal currents; German version HD 428.4 S1:1994
|
| DIN 42504-2-1971
| 分别带断路分接开关或载荷分接开关的功率变压器.2000～10000KVA绝缘等级110N以下的主要尺寸和附件
| Powertransformers with off circuit tap-changer resp. on load tap changer; main dimensions and accessories, 2000 to 10000 kVA and up to insulation class 110 N
|
| DIN 42523-3-1997
| 最高电压不超过36KV设备用电阻为50Hz、电流100至2500kVA的三相，干式配电变压器.第3部分:负载无正弦电流的
| Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal current; German version HD 538.3 S1:1997
|
| DIN 42673-2-1983
| IMB3型带滚动轴承全密封风扇冷却鼠笼三相感应电机.相关框架尺寸.防爆高安全"E"型输出功率
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
|
| DIN 42673-3-1983
| IMB3型带滚动轴承全密封风扇冷却鼠笼三相感应电机.相关框架尺寸.防火外壳"d"型输出功率
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
|
| DIN 42677-2-1983
| 带滚动轴承的IM B 5、 IMB10、IMB14型全密封风扇冷却鼠笼式三相感应电机.相关框架规格－提高防护安全性"E"
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
|
| DIN 42677-3-1983
| 带滚动轴承的IM B 5、 IMB10、IMB14型全密封风扇冷却鼠笼式三相感应电机.相关框架规格－防火外壳体“d"型的
| Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
|
| DIN 42681-1983
| 表面冷却滑环型间歇运行三相电机.结构型式IMB3.带滚动轴承.安装尺寸和功率配置
| Totally enclosed fan-cooled three-phase induction motors with slipring-rotor; type IM B 3, with rolling bearings; mounting dimensions and relationship frame sizes; output ratings for intermittent duty
|
| DIN 42961-1980
| 旋转电动机械功率铭牌.结构
| Rating plates for rotating electrical machinery; design
|
| DIN 43101-16-1980
| 电力牵引用机车车辆.第16部分:大功率电子和电气设备概念
| Rolling stock for electric traction; concepts for electrical equipment for power electronic
|
| DIN 4342-1979
| 燃气轮机.标准参考条件、标准功率、性能数据
| Gas turbines; standard reference conditions, standard power and performance data
|
| DIN 43807-1983
| 测量和控制.电测量仪表.配电板仪表、测量功率及功率因数的配电板仪表和测量转换器用端子标记.
| Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
|
| DIN 44921-2-1985
| 金属壳、管式大功率电热元件.尺寸
| Electric cartridge-type heating elements, with high watt density, metal-sheathed; dimensions
|
| DIN 44922-1-1985
| 浸没式电热元件.旋入式、G11/2B的螺纹、金属外壳直径为6.5mm及8.5mm的电热管.尺寸和额定输入功率
| Electric immersion heating elements; screw-in type, G 1 1/2 B thread with metal-sheathed tubular heating elements of 6,5 and 8,5 mm diameter; dimensions and input rating
|
| DIN 45640-2-1993
| 内河和码头船舶发出的噪声.测定声功率级的包络面法
| Noise emitted by vessels on inland water-ways and harbours; enveloping surface method for the determination of the sound power level
|
| DIN 45922-12-1979
| 电子元件质量评估协调体系.分规范.第12部分:功率电位器
| Harmonized system of quality assessment for electronic components; sectional specification: power potentiometers
|
| DIN 45922-121-1979
| 电子元件质量评估协调体系.空白详细规范.第121部分:功率电位器 (质量评定等级 S)
| Harmonized system of quality assessment for electronic components; blank detail specification: power potentiometers (assessment level S)
|
| DIN 45922-122-1979
| 电子元件质量评估协调体系.空白详细规格.第122部分:功率电位器 (评估M级)
| Harmonized system of quality assessment for electronic components; blank detail specification: power potentiometers (assessment level M)
|
| DIN 45922-131-1979
| 电子元件质量评估协调体系.空白详细规范.第131部分:低功率单匝旋转电位器(评估S级)(CECC 41301)
| Harmonized system of quality assessment for electronic components; blank detail specification: low power single turn rotary potentiometers (assessment level S)
|
| DIN 45980-1003-1977
| 电子元件质量评估协调体系.空白详细规范.第1003部分:阳极耗散功率最高可达1kW的小型发射管
| Harmonized system of quality assessment for electronic components; blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW
|
| DIN 48600-1979
| 工业电热设备.感应加热装置用高频设备的功率测量.高频发生器输出功率的测量方法
| Industrial electro-heat equipment; power measurement on high-frequency appliances for induction heating equipment, measuring method for determination of power output of high-frequency generators
|
| DIN 49406-2-1989
| 额定功率为直流10A.250V和交流16A.250V、 II类电器用防溅型二极插头
| Two-pole plugs for class II appliances rated for 10 A 250 V d.c., 16 A 250 V a.c., splash-proof
|
| DIN 49440-3-1989
| 额定功率为直流10A.250V和交流16A.250V、带接地接触点的二极插座.防溅型轻便二极插座
| Two-pole socket-outlets with earthing contact rated for 10 A 250 V d.c., 16 A 250 V a.c., portable splash-proof socket-outlets
|
| DIN 49440-4-1989
| 额定接地功率为直流10A.250V和交流16A.250V的二极插座.轻便式插座用量规
| Two-pole socket-outlets with earthing rated for 10 A 250 V d.c., 16 A 250 V a.c.; gauges for portable socket-outlets
|
| DIN 49441-2-1989
| 额定功率为直流10A.250V和交流16A.250V、带接地接触点防溅型二极插头
| Two-pole plugs with earthing contact rated for 10 A 250 V d.c., 16 A 250 V a.c., splash-proof
|
| DIN 49441-3-1989
| 额定功率为直流10A.250V和交流16A.250V、带接地接触点的二极插头.检查插头外径用量规.检验装置
| Two-pole plugs with earthing contact rated for 10 A 250 V a.c., 16 A 250 V d.c.; gauges for checking the outside diameter of plugs; test apparatus
|
| DIN 51308-2005
| 建筑中应用和测量力用辅助装置的验证.夹紧装置、液压缸、夹紧工具用功率计
| Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim
|
| DIN 55181-1983
| 机床.额定功率从400kN到4000kN的机械式单动双柱压力机:尺寸
| Machine tools; straight sided single acting mechanical presses with nominal forces from 400 kN to 4000 kN; sizes
|
| DIN 55185-1983
| 机床.额定功率从250kN到4000kN的机械式双柱高速压力机.尺寸
| Machine tools; straight sided high speed mechanical presses with nominal forces from 250 kN to 4000 kN; sizes
|
| DIN 6271-3-1991
| 活塞式内燃机:性能.第10部分:功率公差.对 DIN ISO 3046 第1部分的补充规定
| Reciprocating internal combustion engines; performance; power tolerances; supplementary stipulations to DIN ISO 3046 Part 1
|
| DIN 6280-10-1986
| 活塞式内燃机:带活塞内燃机的发电机组:第10部分:小功率发电机组要求与试验
| Reciprocating internal combustion engines; generating sets with reciprocating internal combustion engines; small power generating sets; requirements and tests
|
| DIN 6584-1982
| 切割技术的术语.切力、能量、工作和功率
| Terms of the cutting technique; forces, energy, work, power
|
| DIN 7753-2-1976
| 工业用窄三角皮带.传动计算、功率额定值
| Narrow V-belts for industrial purposes; calculation of drives, power ratings
|
| DIN EN 1020-2002
| 有风扇输送助燃气体和/或燃烧物质传输、净热输入功率不超过300kW的空间加热用非家用燃气式强制对流空气加热
| Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products (includes Amendment A1:2001); German version EN 1020:1997 + A1:2001
|
| DIN EN 1148-1998
| 热交换器.直接加热式水/水热交换器.确定功率数据的测试方法
| Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data; German version EN 1148:1998
|
| DIN EN 12736-2003
| 电力推动道路车辆.运载工具上充电器充电过程中车辆发出的空气噪声.声功率级测定
| Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level; German version EN 12736:2001
|
| DIN EN 1319-2002
| 有风扇输送助燃气体和/或燃烧物质传输、净热输入功率不超过70kW的空间加热用家用燃气式强制对流空气加热器
| Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW (includes amendment A1:2001 + A2:1999); German version EN 1319:1998 + A1:2001 + A2:1999
|
| DIN EN 135001-1993
| 空白详细规范.功率500W以下的C.W. 功率放大器行波管
| Blank detail specification: C.W. power amplifier travelling wave tubes up to 500 Watts; German version EN 135001:1992
|
| DIN EN 140100-2002
| 分规范.非绕绕小功率固定电阻器
| Sectional specification: Fixed low power non-wire wound resistors; German version EN 140100:1996 + A1:2001
|
| DIN EN 140102-1996
| 空白详细规范:低功率非绕线固定电阻.评定等级 M
| Blank detail specification: Fixed low power non-wirewound resistors - Assessment level M; German version EN 140102:1996
|
| DIN EN 140103-1996
| 空白详细规范:低功率非绕线固定电阻.评定等级 P
| Blank detail specification: Fixed low power non-wirewound resistors - Assessment level: P; German version EN 140103:1996
|
| DIN EN 140104-1996
| 空白详细规范:低功率非绕线固定电阻.评定等级 SB和SC
| Blank detail specification: Fixed low power non-wirewound resistors - Assessment levels: SB and SC; German version EN 140104:1996
|
| DIN EN 140200-2002
| 分规范.大功率固定电阻器
| Sectional specification: Fixed power resistors; German version EN 140200:1996 + A1:2001
|
| DIN EN 140201-1997
| 空白详细规范.大功率固定电阻(评定等级 S)
| Blank detail specification: Fixed power resistors (Assessment level S); German version EN 140201:1996
|
| DIN EN 140202-1997
| 空白详细规范.大功率固定电阻(评定等级 M)
| Blank detail specification: Fixed power resistors (Assessment level M); German version EN 140201:1996
|
| DIN EN 140203-1997
| 空白详细规范.大功率固定电阻(评定等级 H)
| Blank detail specification: Fixed power resistors (Assessment level H); German version EN 140203:1996
|
| DIN EN 140210-1995
| 分规范.固定式功率电阻器.性能认可; 德文版本 EN 140210:1994
| Sectional specification: Fixed power resistors - Capability approval; German version EN 140210:1994
|
| DIN EN 140211-1995
| 空白详细规范.固定式功率电阻器.性能认可; 德文版本EN 140211:1994
| Blank detail specification: Fixed power resistors - Capability approval; German version EN 140211:1994
|
| DIN EN 140401-2002
| 空白详细规范.固定式低功率非线绕表面安装(SMD)电阻器; 德文版本 EN 140401:2002
| Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors; German version EN 140401:2002
|
| DIN EN 140401-801-2003
| 详细规范:低功率非线绕表面安装的固定电阻器.矩形.稳定性级别0.1、0.25、0.5和1
| Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1; German version EN 140401-801:2002 + A1:2003
|
| DIN EN 140401-802-2004
| 详细规范:低功率非线绕表面安装的固定电阻器.矩形.稳定性级别1和2
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 1; 2; German version EN 140401-802:2002 + A1:2004
|
| DIN EN 140401-803-2004
| 详细规范:低功率非线绕表面安装的固定电阻器.圆柱形.稳定性级别0.05、0.1、0.25、0.5、1和2
| Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2; German version EN 140401-803:2002 + A1:2003
|
| DIN EN 140401-804-2005
| 详细规范:固定式低功率非线绕高稳定性表面安装电阻器.矩形.稳定性等级0.1和0.25
| Detail specification: Fixed low power non wire-wound high stability surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; German version EN 140401-804:2005
|
| DIN EN 140402-1999
| 空白详细规范.低功率绕线的表面安装固定式电阻(SMD)
| Blank detail specification: Fixed low power wire wound surface mounting (SMD) resistors; German version EN 140402:1998
|
| DIN EN 140402-801-2005
| 详细规范:固定低功率线绕表面安装(SMD)电阻器.矩形.稳定性等级0.5、1、2
| Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2; German version EN 140402-801:2005
|
| DIN EN 150003-1996
| 空白详细规范.低频放大额定功率双极晶体管
| Blank detail specification - Case-rated bipolar transistors for low frequency amplification; German version EN 150003:1991
|
| DIN EN 150007-1996
| 空白详细规范.高频放大额定功率双极晶体管
| Blank detail specification - Case-rated bipolar transistors for high frequency amplification; German version EN 150007:1991
|
| DIN EN 150011-1996
| 空白详细规范.额定功率半导体闸流管
| Blank detail specification - Case-rated thyristors; German version EN 150011:1991
|
| DIN EN 153000-1999
| 总规范.分立的压力触点功率半导体装置(资格认可)
| Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval); German version EN 153000:1998
|
| DIN EN 190103-1996
| 系列规范.TTL肖脱基低功率数字集成电路.系列54LS,64LS,74LS,84LS
| Family specification - Digital integrated TTL low power Schottky circuits - Series 54 LS, 64 LS, 74 LS, 84 LS; German version EN 190103:1994
|
| DIN EN 190106-1996
| 系列规范.TTL高级肖脱基低功率数字集成电路.系列54ALS,64ALS,74ALS,84ALS
| Family specification - TTL Advanced Low Power Schottky digital integrated circuits - Series 54 ALS, 74 ALS; German version EN 190106:1994
|
| DIN EN 22858-1993
| 端布抽吸式离心泵(额定压力16巴).标示、额定功率和尺寸
| End-suction centrifugal pumps (rating 16 bar); designation, nominal duty point and dimensions (ISO 2858:1975); German version EN 22858:1993
|
| DIN EN 29775-1993
| 游艇.功率为15KW至40KW单个舷外电动机的遥控系统
| Small craft; remote steering systems for single outboard motors of 15 kW to 40 kW (ISO 9975:1990); German version EN 29975:1993
|
| DIN EN 2997-2-1997
| 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第2部分:功率指标和
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 2: Specification of performance and contact arrangements; German version EN 2997-2:1997
|
| DIN EN 300220-3-2001
| 电磁兼容性和射频频谱管理(ERM).短程无线电设备.频率范围25MHz至1000MH,带500mW以下(含)功率电平的无线电装
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW - Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive (Endorsement of the English version EN 300220-3 V 1.1.1(2000-09) as German standard)
|
| DIN EN 301839-1-2003
| 电磁兼容性和射频频谱管理(ERM).外科植入物和附件用频率范围为402 MHz至405 MHz的超低功率有源无线电设备.
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio equipment in the frequency range 402 MHz to 405 MHz for ultra low power active medical implants and accessories - Part 1: Technical characteristics, including electromagnetic compatibility requirements, and test methods (Endorsement of the English version EN 301839-1 V 1.1.1 (2002-06) as German standard)
|
| DIN EN 301839-2-2003
| 电磁兼容性和射频频谱管理(ERM).外科植入物和附件用频率范围为402 MHz至405 MHz的超低功率有源无线电设备.
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio equipment in the frequency range 402 MHz to 405 MHz for ultra low power active medical implants and accessories - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive (Endorsement of the English version EN 301839-2 V 1.1.1 (2002-06) as German standard)
|
| DIN EN 302054-1-2003
| 电磁兼容性和无线电频谱情况.计量辅助设备.功率电平测距不大于200mW的400.15MHz至406MHz频率范围内使用的无
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW - Part 1: Technical characteristics and test methods (Endorsement of the English version EN 302054-1 V 1.1.1 (2003-03) as German standard)
|
| DIN EN 302054-2-2003
| 电磁兼容性和无线电频谱情况.计量辅助设备.功率电平测距不大于200mW的400.15MHz至406MHz频率范围内使用的无
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW - Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive (Endorsement of the English version EN 302054-2 V 1.1.1 (2003-03) as German standard)
|
| DIN EN 302195-1-2004
| 电磁兼容性和无线电频谱情况.超低功率活性医学植入物用频率范围在9 kHz 到 315 kHz的无线电设备.第1部分:技
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories - Part 1: Technical characteristics and test methods (Endorsement of the English version EN 302195-1 V1.1.1 (2004-03) as German standard)
|
| DIN EN 302195-2-2004
| 电磁兼容性和无线电频谱情况.超低功率活性医学植入物用频率范围在9 kHz 到 315 kHz的无线电设备.第2部分:包
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive (Endorsement of the English version EN 302195-2 V1.1.1 (2004-03) as German standard)
|
| DIN EN 302208-1-2005
| 电磁兼容性和无线电频谱情况(ERM).功率等级2W及以下的在频带为865 MHz至868 MHz上运行的射频识别设备.第1部
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W - Part 1: Technical requirements and methods of measurement (Endorsement of the English version EN 302208-1 V1.1.1 (2004-09) V1.1.1 (2004-09) as German standard)
|
| DIN EN 302208-2-2005
| 电磁兼容性和无线电频谱情况(ERM).功率等级2W及以下的在频带为865 MHz至868 MHz上运行的射频识别设备.第2部
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W - Part 2: Harmonized EN under article 3.2 of the R&TTE Directive (Endorsement of the English version EN 302208-2 V1.1.1 (2004-09) as German standard)
|
| DIN EN 303-4-1999
| 供暖锅炉.第4部分:带强制送风燃烧炉的供暖锅炉.功率70kV以下,最大工作压力3巴的带强制送风的油燃烧炉的供暖
| Heating boilers - Part 4: Heating boilers with forced draught burners; special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar; terminology, special requirements, testing and marking; German version EN 303-4:1999
|
| DIN EN 303-5-1999
| 采暖锅炉.第5部分:用固体燃料,手动和自动填料燃烧,公称热功率300kW以下的采暖锅炉.技术、要求、要求试验和
| Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kW - Terminology, requirements, testing and marking; German version EN 303-5:1999
|
| DIN EN 45510-2-4-2001
| 发电站设备采购指南.第2-4部分:电气设备.大功率静态转换器
| Guide for procurement of power station equipment - Part 2-4: Electrical equipment; high power static converters; German version EN 45510-2-4:2000
|
| DIN EN 50207-2001
| 铁路设施.机车用电子功率变流器
| Railway applications - Electronic power convertors for rolling stock; German version EN 50207:2000
|
| DIN EN 50294-2003
| 镇流器-灯管电路总输入功率测量方法
| Measurement method of total input power of ballast-lamp circuits; German version EN 50294:1998 + A1:2001 + A2:2003
|
| DIN EN 50324-2-2002
| 陶瓷材料和部件的压电性能.第2部分:低功率测量方法; 德文版本 EN 50324-2:2002
| Piezoelectric properties of ceramic materials and components - Part 2: Methods of measurement; Low power; German version EN 50324-2:2002
|
| DIN EN 50324-3-2002
| 陶瓷材料和部件的压电性能.第3部分:高功率测量方法; 德文版本 EN 50324-3:2002
| Piezoelectric properties of ceramic materials and components - Part 3: Methods of measurement; High power; German version EN 50324-3:2002
|
| DIN EN 50371-2002
| 证明低功率电子和电气设备符合有关人体受电磁场(10 MHz - 300 GHz) 辐射基本限制条件的一般标准.一般公众;
| Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public; German version EN 50371:2002
|
| DIN EN 55016-1-3-2005
| 无线电干扰和抗扰测量仪器和方法规范.第1-3部分:无线电干扰和抗扰测量仪器.辅助设备.干扰功率
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power (IEC/CISPR 16-1-3:2003); German version EN 55016-1-3:2004
|
| DIN EN 55016-2-2-2006
| 无线电干扰和抗扰测量仪器和方法规范.第2-2部分:干扰和抗扰测量方法.干扰功率测量
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power (IEC/CISPR 16-2-2:2003 + A1:2004 + A2:2005); German version EN 55016-2-2:2004 + A1:2005 + A2:2005
|
| DIN EN 60034-1-2005
| 旋转电机.第1部分:额定功率和性能
| Rotating electrical machines - Part 1: Rating and performance (IEC 60034-1:2004); German version EN 60034-1:2004
|
| DIN EN 60034-18-31-1995
| 旋转电机.第18部分:绝缘系统功能评定.第31节:模绕绕组试验程序.机器最大功率为50MVA,电压为15kV的绝缘系统
| Rotating electrical machines - Part 18: Functional evaluation of insulation systems; Section 31: Test procedures for form-wound windings; thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV (IEC 60034-18-31:1992); German version EN 60034-18-31:1994
|
| DIN EN 60034-18-31/A1-1998
| 旋转电机.第18部分:绝缘系统功能评定.第31节:预压模绕组试验方法.功率为50MVA以下(含)、电压为15kV以下（含
| Rotating electrical machines - Part 18: Functional evaluation of insulation systems; section 31: Test procedures for form-wound windings; thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV; Amendment A1 (IEC 60034-18-31:1992/A1:1996); German version EN 60034-18-31:1994/A1:1996
|
| DIN EN 60051-3-1991
| 直接显示的模拟电器测量仪及附件.第3部分:功率表和无功功率表的特殊要求(IEC 51-3-84.第4版)
| Direct acting indicating analogue electrical measuring instruments and their accessories; part 3: special requirements for wattmeters and varmeters (IEC 60051-3:1984, edition 4); german version EN 60051-3:1989
|
| DIN EN 60051-3/A1-1995
| 直接作动显示模拟电气测量仪器及其附件.第3部分:功率表和无功功率表特殊要求
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters (IEC 60051-3:1984/A1:1994); German version EN 60051-3:1989/A1:1995
|
| DIN EN 60051-5-1991
| 直接显示的模拟电器测量仪及附件.第5部分:相位表/功率因数表和同步指示器的特殊要求
| Direct acting indicating analogue electrical measuring instruments and their accessories; part 5: special requirements for phase meters, power factor meters and synchroscopes (IEC 60051-5:1985, edition 4); german version EN 60051-5:1989
|
| DIN EN 60268-16-2004
| 声系统设备.第16部分:用语音传输系数测定语音清晰度的目标额定功率
| Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60268-16:2003); German version EN 60268-16:2003
|
| DIN EN 60322-2002
| 铁路应用.铁路车辆用电气设备.开放式结构的功率电阻器规则 (IEC 60322:2001); 德文版本 EN 60322:2001
| Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction (IEC 60322:2001); German version EN 60322:2001
|
| DIN EN 60835-3-6-1997
| 数字微波无线电传输系统设备测量方法.第3部分:地球卫星接收站测量.第6节:大功率放大器
| Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations; section 6: High-power amplifiers (IEC 60835-3-6:1996); German version EN 60835-3-6:1996
|
| DIN EN 60931-2-1997
| 额定电压在1kV以下(含1KV)交流设备用非自恢复型并联功率电容器.第2部分:老化试验和破坏试验
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test (IEC 60931-2:1995); German version EN 60931-2:1996
|
| DIN EN 61000-4-13-2003
| 电磁兼容性.第4-13部分:试验和测量技术.包括交流电功率端主信令谐波和中间谐波的低频抗扰试验的试验和测量
| Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002); German version EN 61000-4-13:2002
|
| DIN EN 61000-4-29-2001
| 电磁兼容性.第4-29部分:试验和测量技术.直流输入功率口抗扰试验 电压扰动、短时中断和电压振动
| Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000); German version EN 61000-4-29:2000
|
| DIN EN 61000-4-30-2004
| 电磁兼容性(EMC).第4-30部分:试验和测量技术.功率质量测量方法
| Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (IEC 61000-4-30:2003); German version EN 61000-4-30:2003
|
| DIN EN 61040-1993
| 激光辐射功率和能量测量用探测器、测量仪和设备
| Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992
|
| DIN EN 61071-1-1997
| 大功率电子电容器.第1部分:总则
| Power electronic capacitors - Part 1: General (IEC 61071-1:1991, modified); German version EN 61071-1:1996
|
| DIN EN 61071-2-1997
| 大功率电子电容器.第2部分:熔断器切断试验、破坏试验、自恢复试验和寿命试验要求
| Power electronic capacitors - Part 2: Requirements for disconnecting test on fuses, destruction test, self-healing test and endurance test (IEC 61071-2:1994); German version EN 61071-2:1996
|
| DIN EN 61161-1999
| 0.5MHz至25MHz频率范围内的液体中超声功率的测量
| Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz (IEC 61161:1992 + A1:1998); German version EN 61161:1994 + A1:1998
|
| DIN EN 61173-1996
| 光电功率发生系统过压保护.导则
| Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992); German version EN 61173:1994
|
| DIN EN 61290-2-1-1999
| 光纤放大器.基本规范.第2-1部分:功率参数的检验方法.光学光谱分析仪
| Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for power parameters; optical spectrum analyzer (IEC 61290-2-1:1998); German version EN 61290-2-1:1998
|
| DIN EN 61290-2-2-1999
| 光纤放大器.基本规范.第2-1部分:功率参数的检验方法.电气光谱分析仪
| Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for power parameters; electrical spectrum analyzer (IEC 61290-2-2:1998); German version EN 61290-2-2:1998
|
| DIN EN 61290-2-3-1999
| 光纤放大器.基础规范.第2-3部分:光功率参数的测量方法.光功率计
| Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters; optical power meter (IEC 61290-2-3:1998); German version EN 61290-2-3:1998
|
| DIN EN 61290-7-1-1999
| 光纤放大器.基础规范.第7-1部分:频带外插入损耗的测量方法.滤波光功率计
| Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses; filtered optical power meter (IEC 61290-7-1:1998); German version EN 61290-7-1:1998
|
| DIN EN 61300-3-31-2003
| 光纤互连装置和无源部件.基本试验和测量程序.第3-31部分:检验和测量.纤维光学源的耦合功率比测量
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources (IEC 61300-3-31:2003); German version EN 61300-3-31:2003
|
| DIN EN 61329-1996
| 声音系统设备.声幅射器功率特性值的说明和测量方法(发声用电声变换器)
| Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production) (IEC 61329:1995); German version EN 61329:1996
|
| DIN EN 61523-1-2002
| 迟滞和功率计算标准.第1部分:集成电路迟滞和功率计算系统 (IEC 61523-1:2001); 德文版本 EN 61523-1:2002、
| Delay and power calculation standards - Part 1: Integrated circuit delay and power calculation systems (IEC 61523-1:2001); German version EN 61523-1:2002, text in English
|
| DIN EN 61523-2-2003
| 延时和功率计算标准.第2部分:互补金属氧化物半导体(CMOS)专用集成电路(ASIC)程序库用预设计延时计算规范
| Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries (IEC 61523-2:2002); German version EN 61523-2:2002, text in English
|
| DIN EN 61580-8-1997
| 波导测量方法.第8部分:波导可传送功率
| Methods of measurement for waveguides - Part 8: Waveguide power holding capability (IEC 61580-8:1996); German version EN 61580-8:1996
|
| DIN EN 61683-2000
| 光伏系统.功率调节器.效率测量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999); German version EN 61683:2000
|
| DIN EN 61803-2000
| 高压直流（HVDC)变流站功率损失的测定
| Determination of power losses in high-voltage direct current (HVDC) converter stations (IEC 61803:1999 + Corrigendum 1999); German version EN 61803:1999
|
| DIN EN 61921-2004
| 电力电容器.低压功率因数修正组
| Power capacitors - Low-voltage power factor correction banks (IEC 61921:2003); German version EN 61921:2003
|
| DIN EN 61922-2003
| 高频感应加热装置.测定发生器功率输出的试验方法
| High-frequency induction heating installations - Test methods for the determination of power output of the generator (IEC 61922:2002); German version EN 61922:2002
|
| DIN EN 61954-2004
| 输电和配电系统电力电子设备.静态无功功率补偿器用晶闸管阀的试验
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators (IEC 61954:1999 + Corr. 1999 + A1:2003); German version EN 61954:1999 + A1:2003
|
| DIN EN 621-2002
| 无风扇输送助燃气体和/或燃烧物质、净热输入功率不超过300kW的空间加热用非家用燃气式强制对流空气加热器
| Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products (includes Amendment A1:2001); German version EN 621:1998 + A1:2001
|
| DIN EN 733-1995
| 带轴承座和PN10轴向端口的离心泵.额定功率.主要尺寸、标识系统; 德文版本 EN 733:1995
| End-suction centrifugal pumps, rating 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system; German version EN 733:1995
|
| DIN EN 734-1995
| 带侧通道泵PN40.额定功率、主要尺寸、命名制度
| Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system; German version EN 734:1995
|
| DIN EN 778-2002
| 无风扇输送助燃气体和/或燃烧物质传输、净热输入功率不超过70kW的空间加热用家用燃气式强制对流空气加热器
| Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products (includes amendment A1:2001); German version EN 778:1998 + A1:2001
|
| DIN EN ISO 11203-1996
| 声学.机械装置及设备发出的噪声.根据声功率级测定工作位置和其它指定位置的发射声压级
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN ISO 11203:1995
|
| DIN EN ISO 11554-2006
| 光学和光子学.激光和相关激光设备.激光束功率、能量和时间特征的试验方法(ISO 11554:2006)
| Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006); German version EN ISO 11554:2006
|
| DIN EN ISO 3740-2001
| 声学.噪声源声功率级测定.基础标准使用指南
| Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000); German version EN ISO 3740:2000
|
| DIN EN ISO 3741-2001
| 声学.声压法测定噪声源声功率级.混响室精密法(ISO 3741:1999)
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999); German version EN ISO 3741:1999
|
| DIN EN ISO 3743-2-1996
| 声学.利用声压测定噪声源混响场噪声源声功率级.在混响场中对小声源、可移动声源的工程测量方法.第2部分:专
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994); German version EN ISO 3743-2:1996
|
| DIN EN ISO 3745-2004
| 声学.利用声压测定噪声源的声功率级.消声室和半消声室的精确方法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms (ISO 3745:2003); German version EN ISO 3745:2003
|
| DIN EN ISO 3746-1995
| 声学.声压法测定噪音源声功率级.包络面简易测量法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995); German version EN ISO 3746:1995
|
| DIN EN ISO 5135-1999
| 声学.采用在混响室测量方法测定航空终点站装置、航空终点站设备、消音器和阀门发出的噪音的声功率水平
| Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997); German version EN ISO 5135:1998
|
| DIN EN ISO 5136-2003
| 声学.风机和其他风动设备辐射入管道中的声功率的测定.管道法
| Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003); German version EN ISO 5136:2003
|
| DIN EN ISO 6185-1-2002
| 充气艇.第1部分:发动机最大额定功率为4.5kW的动力艇 (ISO 6185-1:2001); 德文版本 EN ISO 6185-1:2001
| Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001); German version EN ISO 6185-1:2001
|
| DIN EN ISO 6185-2-2002
| 充气艇.第2部分:发动机最大额定功率为4.5kW-15 kW(含15kW)的动力艇 (ISO 6185-2:2001); 德文版本 EN ISO 61
| Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001); German version EN ISO 6185-2:2001
|
| DIN EN ISO 6185-3-2002
| 充气艇.第2部分:发动机最大额定功率为15kW和大于15kW的动力艇 (ISO 6185-3:2001); 德文版本 EN ISO 6185-3:
| Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001); German version EN ISO 6185-3:2001
|
| DIN EN ISO 6926-2001
| 声学.声功率级测定用基准声源性能和校正要求
| Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000); German version EN ISO 6926:2001
|
| DIN EN ISO 9614-2-1996
| 声学.利用声音强度测定噪声源功率级.第2部分:扫描测量法
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996); German version EN ISO 9614-2:1996
|
| DIN EN ISO 9614-3-2003
| 声学.利用声音强度测定噪声源声功率级.第3部分:精确扫描测量法
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002); German version EN ISO 9614-3:2002
|
| DIN ETS 300374-4-1998
| 智能网络.1组智能网络的功率(CS1),智能网络的中心应用协议(INAP).第4部分:业务转换功能(SSF)和特殊转换功能
| Intelligent Network (IN) - Intelligent Network Capability Set 1 (CS1); Core Intelligent Network Application Protocol (INAP) - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for Service Switching Function (SSF) and Specialized Resource Function (SRF); English version ETS 300374-4:1997
|
| DIN IEC 60072-2-2006
| 旋转电机的尺寸及功率等级.第2部分:机座号:355～1000、凸缘号:1180～2360(IEC 60072-2-1990)
| Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange number 1180 to 2360 (IEC 60072-2:1990)
|
| DIN IEC 60115-2-1-1987
| 电子设备固定电阻器.第2部分:空白详细规范.第1节:低功率非线绕固定电阻器E级评定
| Fixed resistors for use in electronic equipment; blank detail specification: fixed low-power non-wirewound resistors; assessment level E; identical with IEC 60115-2-1, edition 1982
|
| DIN IEC 60115-2-1987
| 电子设备固定电阻器.第2部分:分规范.第1节:低功率非线绕固定电阻器
| Fixed resistors for use in electronic equipment; sectional specification: fixed low-power non-wirewound resistors; identical with IEC 60115-2, edition 1982
|
| DIN IEC 60115-4-1-1987
| 电子设备固定电阻器.第4部分:空白详细规范.第1节:功率型固定电阻器E级评定
| Fixed resistors for use in electronic equipment; blank detail specification: fixed power resistors; assessment level E; identical with IEC 60115-4-1, edition 1983
|
| DIN IEC 60115-4-1987
| 电子设备固定电阻器.第4部分:分规范.第1节:功率型固定电阻器
| Fixed resistors for use in electronic equipment; sectional specification: fixed power resistors; identical with IEC 60115-4, edition 1982
|
| DIN IEC 60115-4-2-1993
| 电子设备固定电阻器.第4部分:空白详细规范.大功率固定电阻器.评定等级 F
| Fixed resistors for use in electronic equipment; blank detail specification: fixed power resistors; assessment level F; identical with IEC 60115-4-2:1992
|
| DIN IEC 60235-6-1978
| 微波管电性能测量.第6部分:大功率速调管
| Measurement of the Electrical Properties of Microwave Tubes; Part 6: High Power Clystrons
|
| DIN IEC 60244-2-1982
| 无线电发射机测量方法.第2部分:带宽、带外功率和非主振功率
| Methods of measurement for radio transmitters; part 2: bandwidth, out-of-band power and power of non-essential oscillations
|
| DIN IEC 60510-2-7-1993
| 卫星地面站无线电设备的测量方法.子系统测量.大功率放大器
| Methods of measurement for radio equipment used in satellite earth stations; measurements for sub-systems; high-power amplifier; identical with IEC 60510-2-7:1989
|
| DIN IEC 61123-1993
| 可靠性试验.成功率验证试验方案
| Reliability testing; compliance test plans for success ratio; identical with IEC 61123:1991
|
| DIN ISO 10816-3-1998
| 机械振动.对非旋转部件进行测量以评定机械振动.第3部分:现场测量时额定功率在15kW之上、额定速度在120r/min
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal operating speeds between 120 r/min and 15000 r/min when measured in situ (ISO 10816-3:1998)
|
| DIN ISO 10816-6-1997
| 机械振动.在非旋转部件上的测量和评定机器振动.第6部分:额定功率在100kW以上的往复式机器
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW (ISO 10816-6:1995)
|
| DIN ISO 1585-1997
| 道路车辆.发动机试验规程.净功率
| Road vehicles - Engine test code - Net power (ISO 1585:1992)
|
| DIN ISO 8297-2000
| 声学.环境中声压级评定用多声源工业厂房声功率级的测定.工程法
| Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method (ISO 8297:1994)
|
| DIN V ENV 12102-1996
| 空调器、热力泵和带电动压缩机的除湿器.载气噪声测量.声功率级测定
| Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level; German version ENV 12102:1996
|
| DIN VDE 0560-10-1964
| 电容器规范.第10部分:高频功率电容器规范
| Rules for capacitors; part 10: Rules for high frequency power capacitors
|
| DIN VDE 0560-2-1970
| 电容器规范.第2部分:电压最高可达 1 kV 和功率最高可达 0.5 kvar 的耦合电容器
| Specifications for capacitors; Coupling capacitors for voltages up to 1000 V and power up to 0.5 kvar
|
| DIN VDE 0855-300-2002
| 发射机射频输出功率达1KW的发射/接收天线系统.第300部分:安全要求
| Transmitting/receiving systems for transmitter RF output power up to 1 kW - Part 300: Safety requirements
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com