5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




德国金属材料和非金属材料标准(DIN metallic material and nonmetallic material standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
DIN 13972-2-2002 牙科学.激光焊接质量保证.第2部分:激光焊接用相同和类似牙科金属材料适用性 Dentistry - Quality assurance during laser welding - Part 2: Suitability of identical and similar metallic dental materials for laser welding
DIN 2032-1987 金属包装.薄板金属材料的加螺定封包 Metal packages; screwed closures of light gauge metal
DIN 28052-5-1997 化工设备.工艺技术设备中混凝土构件非金属材料表面处理.第5部分:合成涂层 Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings
DIN 30690-2 Bb.1-1980 煤气安装用零部件.第2部分:煤气器具用阀门的金属材料要求.材料、强度数据的选用说明 Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances, notes for selection for materials, strength data
DIN 30690-2-1980 供气装置中的元部件.对煤气用具中使用的开关金属材料的要求 Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances
DIN 30742-1-1995 废弃物处理工程.液体和固体的专用垃圾箱.第1部分:金属材料制容积为 60 升 - 240 升的垃圾箱 Waste disposal engineering - Waste containers for liquid and solid special waste - Part 1: Containers with a capacity from 60 l to 240 l made from metal material
DIN 30910-1-1990 烧结金属材料.WLB 烧结材料规范.第1部分: WLB 的说明注释 Sintered metal materials; Werkstoff-Leistungsbl?tter (WLB) sint-material specifications; part 1: explanatory notes for WLB
DIN 30910-2-1990 烧结金属材料.WLB 烧结材料规范.第2部分:过滤器用材料 Sintered metal materials; Werkstoff-Leistungsbl?tter (WLB) sint-material specifications; part 2: materials for filters
DIN 30910-3-2004 烧结金属材料.烧结金属规范.第3部分:轴承及具有轴承性能的结构件用材料 Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties
DIN 30910-4-2004 烧结金属材料.烧结金属规范.第4部分:结构件用材料 Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts
DIN 30910-6-1990 烧结金属材料.WLB 烧结材料规范.第6部分:异型件用烧结热锻钢 Sintered metal materials; Werkstoff-Leistungsbl?tter (WLB) sint-material specifications; part 6: hot-forged sintered steels for structural parts
DIN 30911-0-1990 烧结金属材料.WLB 烧结材料规范.第0部分: SPN 的说明注释 Sintered metal materials; sint-testing procedures; part 0: explanatory notes for SPN
DIN 30911-6-1990 烧结金属材料.烧结试验程序.第6部分:过滤器性能测定 Sintered metal materials; sint-testing procedures; part 6: determination of filter properties
DIN 30911-7-1990 烧结金属材料.烧结试验程序.第7部分:软磁性测定 Sintered metal materials; sint-testing procedures; part 7: determination of softmagnetic properties
DIN 30912-1-1990 烧结金属材料.烧结指南.第1部分:烧结件的机加工 Sintered metal materials; sint-guide-lines; part 1: machining of sintered parts
DIN 30912-2-1990 烧结金属材料.烧结指南.第2部分:烧结件的设计 Sintered metal materials; sint-guide-lines; part 2: designing of sintered parts
DIN 30912-3-1990 烧结金属材料.烧结指南.第3部分:烧结件的热处理 Sintered metal materials; sint-guide-lines; part 3: heat-treatment of sintered parts
DIN 30912-4-1990 烧结金属材料.烧结指南.第4部分:烧结件的表面处理 Sintered metal materials; sint-guide-lines; part 4: surface-treatment of sintered parts
DIN 30912-5-1990 烧结金属材料.烧结指南.第5部分:烧结件的连接 Sintered metal materials; sint-guide-lines; part 5: joining of sintered parts
DIN 30912-6-1990 烧结金属材料.烧结指南.第6部分:烧结钢的振动强度 Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels
DIN 4753-7-1988 饮用水和服务性用水的热水器和水加热装置.采用抗腐蚀金属材料作触水面的防腐蚀处理.第7部分:要求和检验 Water heaters and water heating installations for drinking water and service water; corrosion protection on the water side by corrosion-resistant metallic materials; requirements and testing
DIN 50103-3-1995 金属材料检验.洛氏硬度试验.第3部分:薄钢板用改良洛氏刻度盘 Bm 和 Fm Testing of metallic materials - Rockwell hardness test - Part 3: Modified Rockwell scales Bm and Fm for thin steel sheet
DIN 50106-1978 金属材料的检验;压力试验 Testing of Metallic Materials; Compression Test
DIN 50113-1982 金属材料的检验.旋转棒材弯曲疲劳试验 Testing of metals; Rotating bar bending fatigue test
DIN 50115-1991 金属材料的试验.切口棒材撞击试验.试件的特殊形状和评估方法 Notched bar impact testing of metallic materials using test pieces other than ISO test pieces
DIN 50125-2004 金属材料的试验.抗拉试验用试样 Testing of metallic materials - Tensile test pieces
DIN 50131-1974 金属材料的检验.收缩率测定 Testing of Metallic Materials; Determination of Shrinkage
DIN 50141-1982 金属材料的检验.剪切试验 Testing of metals; Shear test
DIN 50142-1982 金属材料的检验.扁钢弯曲疲劳试验 Testing of metallic materials; Flat bending fatigue test
DIN 50156-1-2007 金属材料.里氏硬度试验.第1部分:试验方法 Metallic materials - Leeb hardness test - Part 1: Test method
DIN 50156-2-2007 金属材料.里氏硬度试验.第2部分:试验装置的检验和校准 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
DIN 50156-3-2007 金属材料.里氏硬度试验.第3部分:参考试块的校准 Metallic materials - Leeb hardness test - Part 3: Calibration of reference blocks
DIN 50600-1980 金属材料的检验.金相显微照片.图象比列及尺寸 Testing of metallic materials; Metallographic Micrographs; Picture scales and formats
DIN 50928-1985 金属腐蚀.对与含水腐蚀剂接触的涂层金属材料防腐检验和评定 Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents
DIN 50929-1-1985 金属腐蚀.承受外部腐蚀时金属材料腐蚀的概率.总则 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general
DIN 50929-2-1985 金属腐蚀.在承受外部腐蚀条件下金属材料的腐蚀概率.建筑物内部使用的构件 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; service components inside buildings
DIN 50929-3-1985 金属腐蚀.承受外部腐蚀时金属材料腐蚀的概率.掩埋的和水中的管道和结构零组件构件 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components
DIN 50930-6-2001 金属腐蚀.管、槽和装置内水造成的金属材料腐蚀.第6部分:饮用水成分的影响 Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus - Part 6: Influence of the composition of drinking water
DIN 51211-1978 金属材料检验.金属丝反响弯曲试验 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN 51212-1978 金属材料检验.金属丝的扭转试验 Testing of Metallic Materials; Torsion Test of Wires
DIN 51215-1975 金属材料的试验.金属丝的绕曲试验.一般数据 Testing of Metallic Materials; Wrapping Test for Wires; General Information
DIN 52108-2007 无机非金属材料的测试.依照Boehme使用砂轮进行磨损试验.砂轮法 Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to B?hme - Grinding wheel method
DIN 65470-1989 航空航天.金属材料焊接用焊接填充金属.技术规范 Aerospace; filler metals for welding metallic materials; technical specification
DIN 8528-1-1973 可焊性:第1部分:金属材料定义 Weldability; Metallic Materials, Definitions
DIN 8562-1975 容器的焊接.金属材料容器,焊接原理 Welding of Vessels; Vessels of Metallic Materials, Principles for Welding
DIN EN 10002-1-2001 金属材料.拉力试验.第1部分:室温下的试验方法 Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001
DIN EN 10002-5-1992 金属材料的抗拉试验.第5部分:高温检验法 Tensile testing of metallic materials; method of testing at elevated temperature; german version EN 10002-5:1991
DIN EN 10036-1990 黑色金属材料的化学分析.钢和生铁中碳总含量的测定.在氧气流中燃烧后重量分析测定法 Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen; German version EN 10036:1989
DIN EN 10045-1-1991 金属材料的摆锤式冲击试验.第1部分:试验方法 Charpy impact test on metallic materials; part 1: test method; german version EN 10045-1:1990
DIN EN 10045-2-1993 金属材料.摆锤式冲击试验.第2部分:试验机的验证(摆锤式冲击试验机) Metallic materials; Charpy impact test; part 2: verification of the testing machine (pendulum impact); german version EN 10045-2:1992
DIN EN 10071-1990 黑色金属材料的化学分析.钢和铁中锰含量的测定.电测滴定法 Chemical analysis of ferrous materials; determination of manganese in steel and iron; electrometric titration method; german version EN 10071:1989
DIN EN 1011-1-2002 焊接.金属材料焊接的推荐标准.第1部分:电弧焊的一般指南 (包括修改件 A1:2002); 德文版本 EN 1011-1:1998 + Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding (includes amendment A1:2002); German version EN 1011-1:1998 + A1:2002
DIN EN 1011-2-2001 焊接.焊接金属材料推荐标准.第2部分:铁素体钢电弧焊 Welding - Recommendation for welding of metallic materials - Part 2: Arc welding of ferritic steels; German version EN 1011-2:2001
DIN EN 1011-3-2001 焊接.焊接金属材料推荐标准.第3部分:不锈钢电弧焊 Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels; German version EN 1011-3:2000
DIN EN 1011-4-2001 焊接.焊接金属材料推荐标准.第4部分:铝和铝合金电弧焊 Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; German version EN 1011-4:2000
DIN EN 1011-5-2003 焊接.金属材料焊接的推荐规范.第5部分:包层钢的焊接 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel; German version EN 1011-5:2003
DIN EN 1011-6-2006 焊接.金属材料焊接的推荐标准.第6部分:激光射线焊接.德文版本EN 1011-6-2005 Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding; German version EN 1011-6:2005
DIN EN 1011-7-2004 焊接.焊接金属材料的建议.第7部分:电子束焊接 Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding; German version EN 1011-7:2004
DIN EN 1011-8-2005 焊接.金属材料的焊接建议.第8部分:铸铁的焊接 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons; German version EN 1011-8:2004
DIN EN 10136-1990 黑色金属材料的化学分析.钢铁中镍含量的测定.火焰原子吸收分光光度测定法 Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method; German version EN 10136:1989
DIN EN 10177-1990 黑色金属材料的化学分析.钢中钙的测定.火焰原子吸收分光光度测定法 Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method; german version EN 10177:1989
DIN EN 10178-1990 黑色金属材料的化学分析.钢材中铌含量的测定.分光光度分析法 Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method; german version EN 10178:1989
DIN EN 10179-1990 黑色金属材料的化学分析.钢中氮(痕量)的测定.分光光度测定法 Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method; German version EN 10179:1989
DIN EN 10181-1990 黑色金属材料的化学分析.钢中铅的测定.火焰原子吸收分光光度测定法 Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method; German version EN 10181:1989
DIN EN 10184-2006 黑色金属材料的化学分析.非合金钢铁中磷测定.钼兰分光光度测量法 Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method; English version of DIN EN 10184:2006-05
DIN EN 10188-1990 黑色金属材料的化学分析.钢铁中铬的测定.火焰原子吸收光谱测定法 Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method; German version EN 10188:1989
DIN EN 10200-1992 黑色金属材料的化学分析.钢中硼含量的测定.分光光度法 Chemical analysis of ferrous materials; determination of boron in steel by spectrophotometry; german version EN 10200:1991
DIN EN 10274-1999 金属材料.重物坠落撕裂试验 Metallic materials - Drop weight tear test; German version EN 10274:1999
DIN EN 10275-1999 金属材料.管环液压压力试验 Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
DIN EN 10291 Bb.1-2001 金属材料.单轴蠕变拉伸试验.试验方法.应用说明 Metallic materials - Uniaxial creep testing in tension - Method of test; indications for application
DIN EN 10291-2001 金属材料.单轴蠕变拉伸试验.试验方法 Metallic materials - Uniaxial creep testing in tension - Method of test; German version EN 10291:2000
DIN EN 10319-1-2003 金属材料.拉伸应力松弛试验.第1部分:试验机规程 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines; German version EN 10319-1:2003
DIN EN 10319-2-2007 金属材料.拉伸应力松弛试验.第2部分:螺栓接合模型规程 Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models; English version of DIN EN 10319-2:2007-01
DIN EN 1043-1-1996 金属材料焊接破坏试验.硬度试验.第1部分:电弧焊接缝硬度试验 Destructive test on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints; German version EN 1043-1:1995
DIN EN 1043-2-1996 金属材料焊缝破坏试验.硬度试验.第2部分:焊接接缝显微硬度试验 Destructive test on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints; German version EN 1043-2:1996
DIN EN 12062-2002 焊缝的无损检验.金属材料的一般规则; 德文版本 EN 12062:1997 + A1:2002 Non-destructive testing of welds - General rules for metallic materials; German version EN 12062:1997 + A1:2002
DIN EN 12500-2000 金属材料防腐.大气环境腐蚀概率.大气环境腐蚀性的分类、测定和评估 Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments; German version EN 12500:2000
DIN EN 12501-1-2003 金属材料防腐.土壤腐蚀可能性.第1部分:总则 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General; German version EN 12501-1:2003
DIN EN 12501-2-2003 金属材料防腐措施.土壤中腐蚀似然性.第2部分:低合金和非合金黑色金属材料 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003
DIN EN 12502-1-2005 金属材料防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第1部分:总则 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General; German version EN 12502-1:2004
DIN EN 12502-3-2005 金属材料防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第3部分:热浸镀锌亚铁材料的影响因素 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials; German version EN 12502-3:2004
DIN EN 12502-4-2005 金属材料防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第4部分:不锈钢的影响因素 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels; German version EN 12502-4:2004
DIN EN 12502-5-2005 金属材料防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第5部分:铸铁、非合金和低合金钢的影响因素 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels; German version EN 12502-5:2004
DIN EN 13068-3-2001 无损检验.放射检验.第2部分:采用χ和伽玛射线对金属材料进行放射检验的一般原则; 德文版本 EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; German version EN 13068-3:2001
DIN EN 1320-1996 金属材料焊缝无损试验.断裂试验 Destructive tests on welds in metallic materials - Fracture test; German version EN 1320:1996
DIN EN 1321-1996 金属材料焊缝无损检测.接缝宏观和微观检验 Destructive tests of welds in metallic materials - Macroscopic and microscopic examination of welds; German version EN 1321:1996
DIN EN 13397-2002 工业用阀门.金属材料制隔膜阀门; 德文版本 EN 13397:2001 Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001
DIN EN 13479-2005 焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2004
DIN EN 1418-1998 焊接操作人员.全机加工的和自动焊接金属材料的熔焊和电阻焊装置操作员的批准试验 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials; German version EN 1418:1997
DIN EN 14784-2-2005 无损检验.储磷成像板工业计算机射线照相.第2部分:用Χ射线和Υ射线检验金属材料的一般原则 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays; German version EN 14784-2:2005
DIN EN 14868-2005 抗腐蚀金属材料的防护.闭水循环系统中腐蚀可能性评定指南 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems; German version EN 14868:2005
DIN EN 1514-1-1997 法兰盘及其连接件.有PN标识的法兰盘用密封件尺寸.第1部分:带或不带衬垫的非金属材料制扁平密封件 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997
DIN EN 2002-001 Berichtigung 1-2007 航空航天系列.金属材料.试验方法.第1部分:环境温度下的抗拉测试 Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005, Corrigenda to DIN EN 2002-001:2006-11
DIN EN 2002-001-2006 航天航空系列.金属材料.试验方法.第1部分:室温下抗拉试验 Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005
DIN EN 2002-002 Berichtigung 1-2007 航空航天系列.金属材料.试验方法.第2部分:升温抗拉测试 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005, Corrigenda to DIN EN 2002-002:2006-11
DIN EN 2002-002-2006 航天航空系列.金属材料.试验方法.第2部分:高温下抗拉试验 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005
DIN EN 2032-1-2003 航空航天系列.金属材料.第1部分:常规命名 Aerospace series - Metallic materials - Part 1: Conventional designation; German and English version EN 2032-1:2001
DIN EN 2032-2-1994 航空航天系列.金属材料.第2部分:供货状态下冶金状态标志 Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994
DIN EN 2078-2003 航空航天系列.金属材料.生产进度图表、检验进度图表、检验和试验报告;定义、总则、编制和批准 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval; German and English version EN 2078:2001
DIN EN 2243-1-2007 航空航天系列.非金属材料.结构胶粘剂.试验方法.第1部分:单面搭接剪切 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005
DIN EN 2243-2-2006 航空航天系列.非金属材料.结构胶粘剂.试验方法.第2部分:金属与金属间的剥离试验 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
DIN EN 2243-3-2006 航空航天系列.非金属材料.结构胶粘剂.试验方法.第3部分:金属蜂窝状夹芯材料的剥离试验 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005
DIN EN 2243-4-2006 航空航天系列.非金属材料.结构胶粘剂.试验方法.第4部分:金属与蜂窝芯平面的拉伸试验 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test; German and English version EN 2243-4:2005
DIN EN 2243-5-2006 航空航天系列.非金属材料.结构胶粘剂.试验方法.第5部分:老化试验 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005
DIN EN 2243-6-2006 航空航天系列.非金属材料.结构胶粘剂.试验方法.第6部分:抗剪应力和剪切应变的测定 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
DIN EN 2310-1991 航空航天.非金属材料耐燃烧额定值的试验方法 Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991
DIN EN 2667-6-2003 航空航天系列.非金属材料.泡沫结构粘合剂.试验方法.第6部分:测定吸水率 Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption; German and English version EN 2667-6:2001
DIN EN 2744-1992 航空航天.非金属材料.优选的试验温度 Aerospace series; non-metallic materials; preferred test temperatures; german version EN 2744:1992
DIN EN 2781-1998 航空航天系列.非金属材料.结构件胶粘剂.试验方法.底层涂料厚度的测定 Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998
DIN EN 4000-2003 航空航天系列.金属材料.金属半成品尺寸标准的起草和说明规则 Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products; German and English version EN 4000:2001
DIN EN 4258-1998 航空航天系列.金属材料.标准化工作的一般组织.欧洲标准类型之间的联系及其应用 Aerospace series - Metallic materials - General organization of standardization; links between types of EN standards and their use; German version EN 4258:1998
DIN EN 4415-2007 航空航天系列.非金属材料.纺织材料.带机织物.技术规范 Aerospace series - Non-metallic materials - Textiles - Narrow woven fabrics - Technical specification; German and English version EN 4415:2006
DIN EN 4416-2007 航空航天系列.非金属材料.纺织材料.宽机织物.技术规范 Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification; German and English version EN 4416:2006
DIN EN 444-1994 无损检验.用χ射线和γ射线对金属材料作射线照相检验的一般原则; 德文版本 EN 444:1994 Non-destructive testing; general principles for the radiographic examination of metallic materials using X-rays and gamma-rays; German version EN 444:1994
DIN EN 462-3-1996 无损检测.放射照片质量.第3部分:黑色金属材料照片质量等级 Non-destructive testing - Image quality of radiogrammes - Part 3: Image quality classes for ferrous metals; German version EN 462-3:1996
DIN EN 764-4-2003 压力设备.金属材料交货技术条件的规定 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials; German version EN 764-4:2002
DIN EN 764-5-2003 压力设备.第5部分:金属材料检验文件及材料规范 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification; German version EN 764-5:2002
DIN EN 875-1995 金属材料焊接破坏试验.冲击试验.试样定位、切口定向和检查 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination; German version EN 875:1995
DIN EN 876-1995 金属材料焊接的破坏试验.有熔焊接头的焊接金属的纵向拉伸试验 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints; German version EN 876:1995
DIN EN 895-1999 金属材料焊接破坏试验.横向拉伸试验 Destructive tests on welds in metallic materials - Transverse tensile test; German version EN 895:1995
DIN EN 910-1996 金属材料上焊接接缝的破坏试验.弯曲试验 Destructive test on welds in metallic materials - Bend tests; German version EN 910:1996
DIN EN ISO 10271 Berichtigung 1-2006 牙科金属材料.腐蚀试验方法 Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001, Corrigenda to DIN EN ISO 10271:2002-01; German version EN ISO 10271:2001/AC:2006
DIN EN ISO 10271-2002 牙科金属材料.腐蚀试验方法 Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001
DIN EN ISO 11114-1-1998 可运输气瓶.装有气体的气瓶及其阀门材料的相容性.第1部分:金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997) (includes corrigendum AC:1998); German version EN ISO 11114-1:1997
DIN EN ISO 11114-2-2001 可运输气瓶.气瓶及阀门材料与内装气体的兼容性.第2部分:非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); German version EN ISO 11114-2:2000
DIN EN ISO 11114-4-2005 移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择耐氢脆的金属材料的试验方法 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); German version EN ISO 11114-4:2005
DIN EN ISO 12737-2005 金属材料.平面变形断裂韧性的测定 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); German version EN ISO 12737:2005
DIN EN ISO 14554-1-2000 焊接质量要求.金属材料的电阻焊接.第1部分:综合质量要求 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000
DIN EN ISO 14554-2-2000 焊接质量要求.金属材料的电阻焊接.第2部分:基本质量要求 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000
DIN EN ISO 14555-2006 焊接.金属材料的电弧螺柱焊接 Welding - Arc stud welding of metallic materials (ISO 14555:2006); English version of DIN EN ISO 14555:2006-12
DIN EN ISO 14577-1-2003 金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN EN ISO 14577-2-2003 金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机检定和校准 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002
DIN EN ISO 14577-3-2003 金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN EN ISO 14577-4-2007 金属材料.硬度和材料参数用仪器压痕试验.第4部分:金属和非金属覆层试验方法(ISO 14577-4-2007) Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); German version EN ISO 14577-4:2007
DIN EN ISO 15607-2004 金属材料焊接程序规范和合格鉴定.总则 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003); German version EN ISO 15607:2003
DIN EN ISO 15609-1-2005 金属材料焊接程序的规范和合格鉴定.焊接程序规范.第1部分:弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004); German version EN ISO 15609-1:2004
DIN EN ISO 15609-2-2001 金属材料焊接程序规范和合格鉴定.焊接程序规范.第2部分:气焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001); German version EN ISO 15609-2:2001
DIN EN ISO 15609-3-2004 金属材料焊接程序的规范和合格评定.焊接程序规范.第3部分:电子束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO 15609-3:2004); German version EN ISO 15609-3:2004
DIN EN ISO 15609-4-2004 金属材料焊接程序的规范和合格评定.焊接程序规范.第4部分:激光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2004); German version EN ISO 15609-4:2004
DIN EN ISO 15609-5-2004 金属材料焊接程序的规范和合格评定.焊接程序规范.第5部分:电阻焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2004); German version EN ISO 15609-5:2004
DIN EN ISO 15610-2004 金属材料焊接过程的规范和合格鉴定.基于已试验过的焊接耗材的合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003); German version EN ISO 15610:2003
DIN EN ISO 15611-2004 金属材料焊接程序规范和合格鉴定.根据已有的焊接经验进行合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003); German version EN ISO 15611:2003
DIN EN ISO 15612-2004 金属材料焊接程序的规范和合格评定.通过采用标准焊接程序的合格评定 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004); German version EN ISO 15612:2004
DIN EN ISO 15613-2004 金属材料焊接程序的规范和合格鉴定.基于生产前焊接试验的合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004); German version EN ISO 15613:2004
DIN EN ISO 15614-1-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的弧焊接和气焊接以及镍和镍合金的弧焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004); German version EN ISO 15614-1:2004
DIN EN ISO 15614-10-2005 金属材料焊接过程的规范和鉴定.焊接程序试验.第10部分:高压干焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding (ISO 15614-10:2005); German version EN ISO 15614-10:2005
DIN EN ISO 15614-11-2002 金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接 (ISO 15614-11:2002); 德文版本 EN Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002
DIN EN ISO 15614-12-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第12部分:点焊、缝焊和凸焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004); German version EN ISO 15614-12:2004
DIN EN ISO 15614-13-2005 金属材料焊接过程的规范和鉴定.焊接程序试验.第13部分:电阻对焊和闪光焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Resistance butt and flash welding (ISO 15614-13:2005); German version EN ISO 15614-13:2005
DIN EN ISO 15614-2-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.第2部分:铝及其合金的弧焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005
DIN EN ISO 15614-4-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.第4部分:铝铸件的精焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005); German version EN ISO 15614-4:2005
DIN EN ISO 15614-5-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004); German version EN ISO 15614-5:2004
DIN EN ISO 15614-6-2007 金属材料焊接程序的规范和鉴定.焊接程序试验.第6部分:铜及其合金的电弧焊接和气焊(ISO 15614-6-2006) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006); English version of DIN EN ISO 15614-6:2007-01
DIN EN ISO 15614-7-2007 金属材料焊接程序的规范和鉴定.焊接程序试验.第7部分:覆盖焊接(ISO 15614-7:2007) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007); German version EN ISO 15614-7:2007
DIN EN ISO 15614-8-2002 金属材料焊接程序规范和资格.焊接程序试验.第8部分:管对管板连接件的焊接 (ISO 15614-8:2002); 德文版本 EN Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002); German version EN ISO 15614-8:2002
DIN EN ISO 15620-2000 焊接.金属材料的摩擦焊接 Welding - Friction welding of metallic materials (ISO 15620:2000); German version EN ISO 15620:2000
DIN EN ISO 17641-1-2004 金属材料焊接的有损检验.焊件的热裂试验.弧焊过程.第1部分:通则 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17641-1:2004); German version EN ISO 17641-1:2004
DIN EN ISO 17641-2-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第2部分:自束试验 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2005); German version EN ISO 17641-2:2005
DIN EN ISO 17642-1-2004 金属材料的焊接的有损试验.焊件的冷裂试验.弧焊过程.第1部分:通则 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004); German version EN ISO 17642-1:2004
DIN EN ISO 17642-2-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第2部分:自束试验 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005); German version EN ISO 17642-2:2005
DIN EN ISO 17642-3-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第3部分:外部荷载试验 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005); German version EN ISO 17642-3:2005
DIN EN ISO 17653-2003 金属材料焊缝破坏检验.电阻点焊扭转试验 Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2003); German version EN ISO 17653:2003
DIN EN ISO 17654-2003 金属材料焊缝破坏检验.电阻焊.电阻缝焊压力试验 Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003
DIN EN ISO 17655-2003 金属材料焊缝破坏检验.δ铁素体测量样品制备方法 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003); German version EN ISO 17655:2003
DIN EN ISO 18265-2004 金属材料.硬度值的换算 Metallic materials - Conversion of hardness values (ISO 18265:2003); German version EN ISO 18265:2003
DIN EN ISO 18278-1-2005 电阻焊.可焊性.第1部分:金属材料的电阻点焊、缝焊和凸焊的可焊性评定 Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2004); German version EN ISO 18278-1:2004
DIN EN ISO 20482-2003 金属材料.薄板材和带材.埃里克森压凹试验 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003); German version EN ISO 20482:2003
DIN EN ISO 22674-2007 牙科.固定和可移动复位的金属材料和器具 Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2006); English version of DIN EN ISO 22674:2007-02
DIN EN ISO 2738-2000 不包括硬金属的烧结金属材料.渗透性烧结金属材料.密度、油含量和开孔率的测定 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN EN ISO 2740-2007 烧结金属材料(不包括硬质合金).拉力试件 Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2007); German version EN ISO 2740:2007
DIN EN ISO 3325-2002 包括硬质合金的烧结金属材料.横向断裂强度的测定 (ISO 3325:1996 + AMD 1:2001) (包括修改件A1:2002); 德文 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002
DIN EN ISO 376-2005 金属材料.单轴向试验机验证用作用力检验仪的校准 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2004); German version EN ISO 376:2004
DIN EN ISO 3785-2006 金属材料.关于产品质地的试验样品轴的命名 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006); English version of DIN EN ISO 3785:2006-05
DIN EN ISO 3834-1-2006 金属材料的熔化焊质量要求.第1部分:质量要求的适当等级的选择标准 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005); German version EN ISO 3834-1:2005
DIN EN ISO 3834-2-2006 金属材料熔焊的质量要求.第2部分:综合质量要求(ISO 3834-2-2005).德文版本EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005); German version EN ISO 3834-2:2005
DIN EN ISO 3834-3-2006 金属材料熔焊的质量要求.第3部分:标准质量要求(ISO 3834-3-2005).德文版本EN ISO 3834-3:2005 Quality requirements for fusion welding for metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005); German version EN ISO 3834-3:2005
DIN EN ISO 3834-4-2006 金属材料熔焊的质量要求.第4部分:基本质量要求(ISO 3834-4-2005).德文版本EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005); German version EN ISO 3834-4:2005
DIN EN ISO 3834-5-2006 金属材料的熔焊质量要求.第5部分:有必要声明和ISO 3834-2、 ISO 3834-3或ISO 3834-4质量要求一致的文件 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2005); German version EN ISO 3834-5:2005
DIN EN ISO 3892-2001 金属材料转化涂层.单位面积涂层质量测定.称重法 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001
DIN EN ISO 3928-2006 不包括硬质金属的烧结金属材料.疲劳试验试样 Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999); English version of DIN EN ISO 3928:2006-06
DIN EN ISO 4022-2006 可渗透性烧结金属材料.液体渗透性的测定 Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:1987); English version of DIN EN ISO 4022:2006-06
DIN EN ISO 4498-2007 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005); German version EN ISO 4498:2007
DIN EN ISO 4545-1-2006 金属材料.硬度试验.第1部分:试验方法(ISO 4545-1-2005).德文版本EN ISO 4545-1-2005 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2005); German version EN ISO 4545-1:2005
DIN EN ISO 4545-2-2006 金属材料.硬度试验.第2部分:试验机的验证和校准(ISO 4545-2-2005).德文版本EN ISO 4545-2:2005 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2005); German version EN ISO 4545-2:2005
DIN EN ISO 4545-3-2006 金属材料.硬度试验.第3部分:标准块的校准(ISO 4545-3-2005).德文版本EN ISO 4545-3:2005 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2005); German version EN ISO 4545-3:2005
DIN EN ISO 4545-4-2006 金属材料.硬度试验.第4部分:硬度值表(ISO 4545-4-2005).德文版本EN ISO 4545-4:2005 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005); German version EN ISO 4545-4:2005
DIN EN ISO 6506-1-2006 金属材料.布氏硬度试验.第1部分:试验方法 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005); German version EN ISO 6506-1:2005
DIN EN ISO 6506-2-2006 金属材料.布氏硬度试验.第2部分:试验机的检验和校准 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005); German version EN ISO 6506-2:2005
DIN EN ISO 6506-3-2006 金属材料.布氏硬度试验.第3部分:基准块的校准 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005); German version EN ISO 6506-3:2005
DIN EN ISO 6507-1-2006 金属材料.维氏硬度试验.第1部分:试验方法 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005); German version EN ISO 6507-1:2005
DIN EN ISO 6507-2-2006 金属材料.维氏硬度试验.第2部分:试验机的检验和校准 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005); German version EN ISO 6507-2:2005
DIN EN ISO 6507-3-2006 金属材料.维氏硬度试验.第3部分:基准块的校准 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2005); German version EN ISO 6507-3:2005
DIN EN ISO 6507-4-2006 金属材料.维氏硬度试验.第4部分:硬度值表(ISO 6507-4-2005).德文版本EN ISO 6507-4:2005 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2005); German version EN ISO 6507-4:2005
DIN EN ISO 6508-1-2006 金属材料.洛氏硬度试验.第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T刻度) Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005); German version EN ISO 6508-1:2005
DIN EN ISO 6508-2-2006 金属材料.洛氏硬度试验.第2部分:试验机的检验和校准(A、B、C、D、E、F、G、H、K、N、T刻度) Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005); German version EN ISO 6508-2:2005
DIN EN ISO 6508-3-2006 金属材料.洛氏硬度试验.第3部分:基准块的校准(A、B、C、D、E、F、G、H、K、N、T刻度) Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005); German version EN ISO 6508-3:2005
DIN EN ISO 6520-1-2007 焊接及相关工艺.金属材料几何缺陷分类.第1部分:氧炔焊 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007); Trilingual version EN ISO 6520-1:2007
DIN EN ISO 6520-2-2002 焊接及相关工艺.金属材料中几何缺陷的分类.第2部分:压力焊(ISO 6520-2:2001); 德文版本 EN ISO 6520-2:2001 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001
DIN EN ISO 7153-1-2001 外科仪器.金属材料.第1部分:不锈钢 Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); German version EN ISO 7153-1:2000
DIN EN ISO 7438-2005 金属材料.弯曲试验 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
DIN EN ISO 7500-1 Bb.1-1999 金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证与校正.拉伸、压缩及弯曲试验 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compression and flexion testing machines
DIN EN ISO 7500-1 Bb.2-1999 金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.弹簧试验机的要求、验 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing machines
DIN EN ISO 7500-1 Bb.3-1999 金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.疲劳试验机的要求、验 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing machines
DIN EN ISO 7500-1-2004 金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004
DIN EN ISO 7500-2-2007 金属材料.静态非同轴试验机校验.第2部分:拉伸蠕变试验机.外加力校验 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006); English version of DIN EN ISO 7500-2:2007-04
DIN EN ISO 7799-2000 金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
DIN EN ISO 8491-2004 金属材料.管(全截面).弯曲试验 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN EN ISO 8492-2004 金属材料.管.压扁试验 Metallic materials - Tube - Flattening test (ISO 8492:1998); German version EN ISO 8492:2004
DIN EN ISO 8493-2004 金属材料.管.扩口试验 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998); German version EN ISO 8493:2004
DIN EN ISO 8494-2004 金属材料.管.卷边试验 Metallic materials - Tube - Flanging test (ISO 8494:1998); German version EN ISO 8494:2004
DIN EN ISO 8495-2004 金属材料.管.环形扩口试验 Metallic materials - Tube - Ring-expanding test (ISO 8495:1998); German version EN ISO 8495:2004
DIN EN ISO 8496-2004 金属材料.管.环形拉伸试验 Metallic materials - Tube - Ring tensile test (ISO 8496:1998); German version EN ISO 8496:2004
DIN EN ISO 9018-2004 金属材料焊缝的破坏试验.十字形和搭接焊缝抗拉试验 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003); German version EN ISO 9018:2003
DIN EN ISO 9513 Bb.1-2003 金属材料.单轴试验伸长计校准.机械伸长计及其校准示例 Metallic materials - Calibration of extensometers used in uniaxial testing - Examples for mechanical extensometers and their calibration
DIN EN ISO 9513 Bb.2-2005 金属材料.单轴向试验用伸长计的校准.激光伸长计系统及其校准 Metallic materials - Calibration of extensometers used in uniaxial testing - Laser extensometer systems and their calibration
DIN EN ISO 9513 Bb.3-2005 金属材料.单轴向试验用伸长计的校准.视频伸长计系统及其校准 Metallic materials - Calibration of extensometers used in uniaxial testing - Video extensometer systems and their calibration
DIN EN ISO 9513-2003 金属材料.单轴试验用伸长仪校正 Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999); German version EN ISO 9513:2002
DIN IEC 60468-1981 金属材料电阻率测量方法 Method of measurement of resistivity of metallic materials
DIN IEC 60740-2-1995 电信和电子设备变压器和电感器铁芯片.第2部分:软磁金属材料制铁芯片最小漏磁性规范 Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993)
DIN ISO 15579-2002 金属材料.低温下张力试验 (ISO 15579:2000) Metallic materials - Tensile testing at low temperature (ISO 15579:2000)
DIN ISO 3312-1990 烧结金属材料和硬质合金.杨氏模量的测定 Sintered metal materials and hardmetals; determination of young modulus; identical with ISO 3312:1987
DIN ISO 3369-1990 不可渗透性烧结金属材料和硬质合金.密度的测定 Impermeable sintered metal materials and hardmetals; determination of density; identical with ISO 3369:1975
DIN ISO 4003-1990 渗透性烧结金属材料.起泡试验孔隙大小的测定 Permeable sintered metal materials; determination of bubble test pore size; identical with ISO 4003:1977
DIN ISO 5754-1990 烧结金属材料(不包括硬质合金).无切口冲击试件 Sintered metal materials, excluding hardmetalls; unnotched impact test piece; identical with ISO 5754:1978
DIN ISO 5755-2004 烧结金属材料.规范 Sintered metal materials - Specifications (ISO 5755:2001)
DIN ISO 5832-1-2000 外科植入物.金属材料.第1部分:锻造不锈钢 Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997)
DIN ISO 5832-11-2001 外科植入物.金属材料.第11部分:锻制6钛/7铝/铌合金 Implants for surgery - Metallic materials - Part 11: Wrought titanium-6-aluminium 7-niobium alloy (ISO 5832-11:1994)
DIN ISO 5832-12-2000 外科植入物.金属材料.第12部分:锻造钴铬钼合金 Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy (ISO 5832-12:1996)
DIN ISO 5832-2-2000 外科植入物.金属材料.第2部分:非合金钛 Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999)
DIN ISO 5832-3-2000 外科植入物.金属材料.第3部分:钛6-铝4-钒锻造合金 Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996)
DIN ISO 5832-4-2000 外科植入物.金属材料.第4部分:钴铬钼铸造合金 Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:1996)
DIN ISO 5832-5-2001 外科植入物.金属材料.第5部分:.精制钴-铬-钨-镍合金 (ISO 5832-5:1993) Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:1993)
DIN ISO 5832-6-2001 外科植入物.金属材料.第6部分:煅制钴镍铬钼合金 Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997)
DIN ISO 5832-7-2001 外科植入物.金属材料.第7部分:可锻和冷加工的钴铬镍钼铁合金 Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:1994)
DIN ISO 5832-8-2000 外科植入物.金属材料.第8部分:锻制钴镍铬钼钨铁合金 Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997)
DIN ISO 5832-9-2000 外科植入物.金属材料.第9部分:锻造高氮不锈钢 Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992)
DIN ISO 7625-1991 烧结金属材料(不包括硬质合金).测定碳含量时化学分析用的样品制备 Sintered metal materials, excluding hardmetals; preparation of samples for chemical analysis for determination of carbon content; identical with ISO 7625:1983
DIN ISO 9649-1993 金属材料.金属丝.反复扭曲试验 Metallic materials; wire; reverse torsion test; identical with ISO 9649:1990
DIN V 1739-1996 金属材料焊缝破坏性试验.宏观和微观检验用浸蚀剂 Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination (CR 12361:1996)
DIN V 30995-1999 不包括硬金属的烧结金属材料.金相制备和检验 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)
DIN V 65900-12-1997 航空航天.金属材料.尺寸标准和材料标准对照关系 Aerospace series - Metallic matrials - Relationship between dimensional standards and material standards (AECMA Technical Report TR 2410:1996)
DIN V 65900-4-1993 航空和航天.金属材料.AECMA名称体系之间的关系 Aerospace series; metallic materials; relationship between AECMA designation systems; identical with AECMA-technical report TR 3900:1993
DIN-Fachbericht 17641-3-2004 金属材料焊接的有损检验.焊件的热裂纹试验.弧焊过程.第3部分:外部负载试验 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 3: Externally loaded test (ISO/TR 17641-3:2004); German translation of CEN ISO/TR 17641-3:2004
DIN-Fachbericht CEN ISO/TR 15608-2006 焊接.金属材料分类体系指南 Welding - Guidelines for a metallic materials grouping system;German version CEN ISO/TR 15608:2005
DIN-Fachbericht CEN ISO/TR 3834-6-2007 金属材料氧炔焊的质量要求.第6部分:ISO 3834(ISO/TR 3834-6-2007)的实施指南 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007); German version CEN ISO/TR 3834-6:2007
DIN-Fachbericht ISO/TR 581-2007 可焊性.金属材料.一般原则 Weldability - Metallic materials - General principles; German version ISO/TR 581:2005
编号中文名称英文名称

返回