| 编号 |
中文名称 |
英文名称 |
| DIN 1623-2-1986
|
扁平钢制产品；冷轧薄钢板和钢带.交付技术状态.一般用途结构钢
|
Steel flat products; cold reduced sheet and strip; technical delivery conditions; general purpose structural steels
|
| DIN 3570-1968
|
20至500NW管用圆钢带箍
|
Steel Strap for Tubes of NW 20 to 500
|
| DIN 65508-1986
|
航空航天.带凸缘垫片和埋头孔、自锁、耐腐蚀钢带MJ螺纹的六角螺母.等级:1100MPa/315℃/425℃
|
Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel; class: 1100 MPa/315 °C/425 °C
|
| DIN EN 10106-2007
|
经完全处理后交付的非定向冷轧电工钢片和钢带
|
Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state; German version EN 10106:2007
|
| DIN EN 10107-2005
|
以完全加工状态交付的晶粒定向电工钢片和钢带
|
Grain-oriented electrical steel sheet and strip delivered in the fully processed state; German version EN 10107:2005
|
| DIN EN 10111-1998
|
冷弯曲成型的连续热轧低碳钢带和薄钢板.交货技术条件
|
Continuously hot-rolled low carbon steel sheet and strip for cold bending - Technical delivery conditions; German version EN 10111:1998
|
| DIN EN 10132-1-2000
|
热处理用冷轧窄钢带材.交货技术条件.第1部分:总则
|
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; German version EN 10132-1:2000
|
| DIN EN 10132-2-2000
|
热处理用冷轧窄钢带材.交货技术条件.第2部分:表面硬化钢
|
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 2: Case hardening steels; German version EN 10132-2:2000
|
| DIN EN 10132-3-2000
|
热处理用冷轧窄钢带材.交货技术条件.第3部分:淬火和回火
|
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering; German version EN 10132-3:2000
|
| DIN EN 10140-2006
|
冷轧窄钢带.尺寸和形状公差
|
Cold rolled narrow steel strip - Tolerances on dimensions and shape; German version EN 10140:2006
|
| DIN EN 10143-2006
|
连续热浸镀钢板和钢带.尺寸和形状公差
|
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape English version of DIN EN 10143:2006-09
|
| DIN EN 10251-1997
|
磁性材料.测定电工钢片和电工钢带几何特性值的方法
|
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip; German version EN 10251:1997
|
| DIN EN 10252-1997
|
磁性材料.中频电工钢片和电工钢带磁性测量方法
|
Magnetic materials - Methods of measurement of magnetic properties of electrical steel sheet and strip at medium frequencies; German version EN 10252:1997
|
| DIN EN 10292-2007
|
冷成形带高屈服应力连续热浸镀层的钢带和钢薄板.交货技术条件
|
Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions; German version EN 10292:2007
|
| DIN EN 10326-2004
|
连续热浸涂覆结构钢带材和板材.交货技术条件
|
Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions; German version EN 10326:2004
|
| DIN EN 10327-2004
|
连续热浸涂覆冷成形低碳钢带材和板材.交货技术条件
|
Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions; German version EN 10327:2004
|
| DIN EN 13246-2001
|
包装.捆绑钢带规范
|
Packaging - Specification for tensional steel strapping; German version EN 13246:2001
|
| DIN EN 13247-2001
|
包装.道路安全绳索升降梯捆绑钢带规范
|
Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads; German version EN 13247:2001
|
| DIN EN 13889-2003
|
一般提升用锻钢带销U形环.固定D形环钩和弓形环钩. 6级安全要求
|
Forged steel shackles for general lifting purposes - Dee shackles and bow shackles; Grade 6 - Safety; German version EN 13889:2003
|
| DIN EN 2079-1995
|
航空航天系列.仪器和设备用耐蚀钢带法兰的精密滚珠轴承.尺寸和负载; 德文版本 EN 2079:1995
|
Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 2079:1995
|
| DIN EN 4198-2007
|
航空航天系列.耐腐蚀钢带自润滑衬垫和螺纹柄的可调自动对心滑动轴承的杆端.尺寸和载荷
|
Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads; German and English version EN 4198:2006
|
| DIN EN 60404-2-1998
|
磁性材料.第2部分:用爱普斯坦方框测量电工薄钢板和钢带材的磁性能的方法
|
Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC 60404-2:1996); German version EN 60404-2:1998
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com