5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




德国密封标准(DIN seals standards)翻译目录查询

ASTM |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
DIN 11483-2-1984 乳品设备.清洁和消毒.对密封材料的影响的条件 Dairy installations; cleaning and disinfection; consideration of the action on sealing materials
DIN 11861-1976 饮料和乳品用管件.橡胶密封圈.要求和试验 Drink- and dairy fittings; sealing rings made of elastomeric materials, requirements testing
DIN 12256-1977 实验室玻璃仪器.球形接口和旋塞的螺旋连接的密封性检验 Laboratory glassware; tightness test of conical joints, spherical joints and stopcocks
DIN 14307-1-1985 带压力用密封圈的铝合金C型刚性联接器.标称压力16 Aluminium alloy solid coupling type C, with sealing ring for pressure purposes; nominal pressure 16
DIN 14307-2-1986 抽吸用C型、标称压力16带密封圈的铝合金刚性接头 Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16
DIN 14308-1-1985 带压力用密封圈的铝合金B型刚性联接器.标称压力16 Aluminium alloy solid coupling type B, with sealing ring for pressure purposes; nominal pressure 16
DIN 14308-2-1986 抽吸用B型、标称压力16带密封圈的铝合金刚性接头 Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16
DIN 14309-1985 标称压力为16带压力吸水密封环的A型铝合金联接器 Aluminium alloy solid coupling type A, with sealing ring for pressure and suction purposes; nominal pressure 16
DIN 14317-1985 标称压力为16、带金属密封面和灰铸铁或铝合金盖的C型铝合金刚性联接器 Aluminium alloy solid coupling type C with metallic sealing area and with cast iron cover or with aluminium alloy cover, type C; nominal pressure 16
DIN 14318-1985 带铸铁或铝合金盖的有金属密封面的B型铝合金刚性联接器PN16 Aluminium alloy solid coupling type B with metallic sealing area and with cast iron cover or with aluminium alloy cover, type B; nominal pressure 16
DIN 14319-1985 铝合金带金属密封面和灰铸铁或铝合金盖的A型固定联接器.公称压力 16 Aluminium alloy solid coupling type A with metallic sealing area and with cast iron or with aluminium alloy cover, type A; nominal pressure 16
DIN 14800-10-2005 消防和救援车辆用消防设备.第10部分:密封箱 Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 10: Sealing chest
DIN 15092-1982 起重机.驱动轮装置及从动轮装置.密封盖 Cranes; driving wheel units and idler wheel units; sealing covers
DIN 16726-1986 塑料屋顶板.塑料密封板.检验 Plastic roofing felt and waterproofing sheet; testing
DIN 16729-1984 由乙烯共聚物沥青(ECB)制成的塑料屋顶薄板材和塑料密封薄板材.要求 Ethylene copolymer bitumen (ECB) plastic roofing sheeting and plastic sealing sheeting; requirements
DIN 16831-7-2004 聚(异)丁烯压力管道用管道配件和连接组件.PB 125型.第7部分:承插焊接用套管、法兰和密封环组件的尺寸 Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and selaing elements for socket welding
DIN 16962-12-1999 聚丙烯(PP)制压力管道用管连接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸缘接头、法兰、密 Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions
DIN 16962-4-1988 1型和2型聚丙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
DIN 16963-11-1999 聚乙烯(PE)制压力管道用管连接件和零件.PE 80和PE 100.第11部分:承口焊接用凸缘接头、法兰、密封圈.尺寸 Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions
DIN 16963-4-1988 高密度聚乙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
DIN 16966-6-1982 玻璃纤维增强聚酯树管(UP-GF)管件和接头组件.卡圈、法兰、密封圈、尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions
DIN 18195 Bb.1-2006 建筑物防水.密封剂定位控制一致性的例子 Water-proofing of buildings - Examples of positioning of sealants in accordance
DIN 18531-1-2005 屋顶的防水.无用屋顶的密封件.第1部分:术语和定义、要求和设计原则 Waterproofing of roofs - Sealings for non-utilized roofs - Part 1: Terms and definitions, requirements, design principles
DIN 18531-2-2005 屋顶的防水.无用屋顶的密封件.第2部分:材料 Waterproofing of roofs - Sealings for non-utilized roofs - Part 2: Materials
DIN 18531-3-2005 屋顶的防水.无用屋顶的密封件.第3部分:设计、材料搬运和密封 Waterproofing of roofs - Sealings for non-utilized roofs - Part 3: Design, handling of materials, execution of sealings
DIN 18531-4-2005 屋顶的防水.无用屋顶的密封件.第4部分:维护 Waterproofing of roofs - Sealings for non-utilized roofs - Part 4: Maintenance
DIN 18540-2006 建筑物用填缝密封剂的外墙接合处密封 Sealing of exterior wall joints in building using joint sealants
DIN 18541-1-2006 现场水泥接缝密封用热塑性塑料制造的止水带.第1部分:术语和定义、形状、尺寸、标记 Termoplastic water stops for sealing joints in in-situ concrete - Part 1: Terms and definitions, shapes, dimensions, marking
DIN 18541-2-2006 现场水泥接缝密封用热塑性塑料制造的止水带.第2部分:要求、试验和检查材料 Thermoplastic water stops for sealing joints in in-situ concrete - Part 2: Material requirements, testing and inspection
DIN 18542-1999 泡沫塑料制浸渍密封带用于外壁接缝时的密封性.浸渍密封带.要求和检验 Sealing of outside wall joints with impregnated sealing tapes made of cellular plastics - Impregnated sealing tapes - Requirements and testing
DIN 18545-1-1992 采用密封剂的窗玻璃.框槽的要求 Glazing with sealants; rebates; requirements
DIN 18545-2-2001 门窗玻璃密封剂密封.第2部分:密封剂命名、要求和试验 Sealing of glazings with sealants - Part 2: Sealants, designation, requirements, testing
DIN 18545-3-1992 采用密封剂的窗玻璃.框槽.镶玻璃装置 Glazing with sealants; rebates; glazing systems
DIN 19534-3-2000 非压力地下排水和污水排放用带环形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:质量控制和安装 Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation
DIN 20006-1989 采矿用管道.符合DIN20002的钢管材和符合DIN20003的连接件用密封圈 Pipeline for mining; sealings for steel tubes according to DIN 20002 and fittings according to DIN 20003
DIN 20013-1989 气动充填管的密封件 Sealings for pneumatic stowing pipes
DIN 22419-2-2004 用于潜在爆炸性环境的采掘电气装置.电缆引入线.第2部分:引入线用密封接头.安全要求和检验 Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 2: Gland adaptors for entries; safety requirements and testing
DIN 22419-3-2004 用于潜在爆炸性环境的采掘电气装置.电缆引入线.第3部分:引入线用密封法兰.安全要求和检验 Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 3: Gland flanges for entries; safety requirements and testing
DIN 25426-1-1988 密封式放射性材料.第1部分:要求和分类 Sealed radioactive sources; requirements and classification
DIN 25426-2-1992 密封的放射源.对特殊形状的放射性材料的要求 Sealed radioactive sources; special form radioactive material, requirements
DIN 25426-3-1991 密封放射性材料.第3部分:当作生产和原型试验一部分的渗漏试验方法 Sealed radioactive sources; leakage test methods as part of production and prototype testing
DIN 25426-4-1995 密封的辐射源.第4部分:循环检验的泄漏试验方法 Sealed radioactive sources - Part 4: Leakage test methods for recurrent inspections
DIN 25493-1997 核设施.防止金属部件表面受到组装工具、密封、装璜、包装材料和隔热材料的损伤 Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials
DIN 2695-2002 法兰连接用隔板焊接密封件和焊接环形密封件 Diaphragm-weld packings and weld ring seals for flange connections
DIN 27205-11-2005 铁路车辆的状况.制动器.第11部分:动力牵引装置上直接制动和所连接车辆上间接制动用制动器的功能和密封性 State of railway vehicles - Brake - Part 11: Function and tightness of the brake for direct braking on powered traction unit and indirect braking on connected vehicles
DIN 27205-12-2006 铁路车辆的状况.第12部分:铁路机车制动器的功能和密封性 State of railway vehicles - Brake - Part 12: Function and tightness of railway vehicle brakes
DIN 28090-2-1995 法兰连接件的静态密封垫.第2部分:板材制密封垫.质量保证的特殊试验程序 Static gaskets for flange connections - Part 2: Gaskets made from sheets; special test procedures for quality assurance
DIN 28090-3-1995 法兰连接件的静态密封垫.第3部分:板材制密封垫:耐化学性的试验程序 Static gaskets for flange connections - Part 3: Gaskets made from sheets; chemical resistance test procedures
DIN 28091-1-1995 密封板的交货技术条件.第1部分:密封材料.一般要求 Technical delivery conditions for gasket sheets - Part 1: Gasket materials; general requirements
DIN 28091-2-1995 密封板的交货技术条件.第2部分:纤维基密封材料.要求和试验 Technical delivery conditions for gasket sheets - Part 2: Fibre-based gasket materials (FA); requirements and testing
DIN 28091-3-1995 密封板的交货技术条件.第3部分:聚四氟乙烯基密封材料.要求和试验 Technical delivery conditions for gasket sheets - Part 3: PTFE-based gasket materials (TF); requirements and testing
DIN 28091-4-1995 密封板的交货技术条件.第4部分:膨胀石墨基密封材料.要求和试验 Technical delivery conditions for gasket sheets - Part 4: Expanded graphite-based gasket materials (GR); requirements and testing
DIN 28138-1-2006 搅拌器轴的滚动机构密封.第1部分:碳钢或不锈钢.使用数据、组装尺寸 Rotating mechanical seals for agitator shafts - Part 1: Carbon or stainless steel - Operating data, assembly dimensions
DIN 28138-2-2006 搅拌器轴的滚动机构密封.第2部分:线纹玻璃钢.使用数据、组装尺寸 Rotating mechanical seals for agitator shafts - Part 2: Steel, glass-lined - Operating data, assembly dimensions
DIN 28138-3-2006 搅拌器轴的滚动机构密封件.第3部分:旋转机械密封的障碍液体、冷却、装配和命名系统的连接器 Rotating mechanical seals for agitator shafts - Part 3: Connections for barries fluids, cooling, control and mounting and designation system for rotating mechanical seals
DIN 28148-1992 搪瓷钢制搅拌容器的聚四氟乙烯外壳密封 PTFE envelope gaskets for glass lined agitator vessels
DIN 28154-1983 旋转机械密封的碳钢和不锈钢搅拌器的轴端.尺寸 Shaft end for carbon and stainless steel agitators, for rotating mechanical seals; dimensions
DIN 28162-1-1983 带旋转机构密封的搅拌器传动装置用搅拌器齿轮托架 Agitator gear stools for agitator drives with a rotating mechanical seal
DIN 28162-2-1983 带填料盖密封的搅拌器传动装置用搅拌器齿轮托架 Agitator gear stools for agitator drives with gland sealing
DIN 28192-1994 管状热交换器用橡胶隔板密封件 Elastic pass partition gaskets for tubular heat exchangers
DIN 28463-1987 油罐车的安装法兰.密封垫 Flanges for tank trucks; gaskets
DIN 28601-2000 延性铸铁管道和配件.螺纹套管接头.组件、套管、螺丝环、密封环和滑动环 Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
DIN 28602-2000 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
DIN 28603-2002 可锻铸铁管道和配件.插入式连接件.测量、管座和密封垫 Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets
DIN 30658-1-1998 地下煤气管道接头附加密封材料.第1部分:已密封煤气管道附加密封用塑料薄膜和织物衬套.安全要求和试验 Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
DIN 30658-2-1999 地下煤气管道用后续密封材料.第2部分:地下煤气管道接头用后续密封材料.安全要求和试验 Materials for the subsequent sealing of underground gas mains - Part 2: Materials for the subsequent sealing of joints in underground gas mains; safety requirements and testing
DIN 30660-1999 供气、供水及水暖设备用密封材料.家用设施金属螺纹连接用非硬化连接密封材料和聚四氟乙烯密封带 Sealing materials for gas and water supply as well as water heating systems - Non-hardening jointing compounds and polytetrafluoroethylene (PTFE) tapes for metallic threaded joints in domestic installations
DIN 31692-5-2000 滑动轴承.第5部分:油密封性检验用检查表 Plain bearings - Part 5: Check list for verification of oil tightness
DIN 3236-1-1994 分流器法兰密封管座的直排型阀门.第1部分:无衬 Straight pattern valves with flange socket placed in shunt - Part 1: Without lining
DIN 3236-2-1996 分流器中带法兰密封的流量观查孔玻璃阀门.第1部分:珐琅衬 Straight pattern valves with flange socket placed in shunt - Part 2: With enamel lining
DIN 3237-1-1994 主电源连接的法兰密封管座直排型阀门.第1部分:无衬 Straight pattern valves with flange socket in main power connection - Part 1: Without lining
DIN 3237-2-1994 主电源连接的法兰密封管座直排型阀门.第2部分:带塑料内衬 Straight pattern valves with flange socket in main power connection - Part 2: With plastic lining
DIN 3237-3-1996 主电源连接装置带法兰密封的流量观察孔玻璃阀门.第3部分:带橡胶外皮 Straight pattern valves with flange socket in main power connection - Part 3: With rubber lining
DIN 3528-1986 煤气装置用阀门.带密封垫的喷嘴 Valves for gas installations; nozzles with gasket
DIN 3535-1-1991 煤气供气密封件:家用设备煤气阀门用弹性密封材料:要求和检验 Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
DIN 3535-5-1993 煤气供气密封件:煤气管件和煤气设备用橡胶、软木和合成纤维制密封材料.安全性试验要求 Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests
DIN 3535-6-1999 供气用密封垫.第6部分:气阀、煤气设备和煤气主管道用基于合成纤维、石墨或聚四氟乙烯的密封垫材料 Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
DIN 3750-1957 密封件.术语 Seals; terms
DIN 3760-1996 旋转轴唇形密封环 Rotary shaft lip type seals
DIN 3761-1-1984 汽车用唇型旋转轴密封件.第1部分:术语、公式符号、公差 Rotary shaft lip type seals for automobils; terms, formula symbols, tolerances
DIN 3761-10-1984 汽车用唇型旋转轴密封件.第10部分:试验.试验机器和规范 Rotary shaft lip type seals for automobils; test; test machines and specifications
DIN 3761-11-1984 汽车用唇型旋转轴密封件.第11部分:试验.泄漏评价 Rotary shaft lip type seals for automobils; test; evaluation of leakage
DIN 3761-12-1984 汽车用唇型旋转轴密封件.试验.弹性体压痕硬度的测定.第12部分:显微硬度试验 Rotary shaft lip type seals for automobils; test; determination of indentation hardness of elastomers; micro hardness test
DIN 3761-13-1984 汽车用唇型旋转轴密封件.第13部分:弹性体硫化状态的试验 Rotary shaft lip type seals for automobils; test for curing state of elastomers
DIN 3761-14-1984 汽车用旋转轴唇型密封件.检验.弹性体的红外光谱分析 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
DIN 3761-15-1984 汽车用唇型旋转轴密封环.试验.弹性体耐寒性能测定.差热分析 Rotary shaft lip type seals for automobils; test; determination of cold resistant of elastomers; differential-thermoanalysis
DIN 3761-2-1983 汽车用唇型旋转轴密封件.第2部分:应用 Rotary shaft lip type seals for automobils; applications
DIN 3761-3-1984 汽车用唇型旋转轴密封件.第3部分:材料要求和试验方法 Rotary shaft lip type seals for automobils; material requirements and methods of test
DIN 3761-4-1984 汽车用唇型旋转轴密封件.第4部分:目测的不规则性 Rotary shaft lip type seals for automobils; visual irregularities
DIN 3761-5-1984 汽车用唇型旋转轴密封件.第5部分:试验.测量要求和仪器 Rotary shaft lip type seals for automobils; test; measuring requirements and -instruments
DIN 3761-6-1984 汽车用唇型旋转轴密封件.第6部分:试验.外径测量仪 Rotary shaft lip type seals for automobils; test; outside-diameter measuring instrument
DIN 3761-7-1984 汽车用唇型旋转轴密封件.第7部分:试验.锥度测量心棒 Rotary shaft lip type seals for automobils; test; skittle measuring mandrel
DIN 3761-8-1984 汽车用唇型旋转轴密封件.第8部分:试验.轴截面设计 Rotary shaft lip type seals for automobils; test; carrying out axle-sections
DIN 3761-9-1984 汽车用唇型旋转轴密封件.第9部分:试验.数字式径向力测量仪 Rotary shaft lip type seals for automobils; test; radial force measuring instrument digital
DIN 3771-1-1984 流体系统.O型密封圈.尺寸按ISO 3601/1 Fluid systems; O-rings; dimensions as in ISO 3601/1
DIN 3771-2-1984 流体系统.O型密封圈.试验、标志 Fluid systems; O-rings; test, marking
DIN 3771-3-1984 流体系统.O型密封圈.材料、使用范围 Fluid systems; O-rings; materials, field of application
DIN 3771-4-1984 液压系统.O型密封圈.质量验收准则 Fluid systems; O-rings; quality acceptance criteria
DIN 3780-1954 密封件和填料.填料函直径及相关填料宽度.结构尺寸表 Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
DIN 3865-2002 压合接头.符合 DIN EN ISO 8434-1 的压接用带 'O' 型密封圈的24度螺纹接头 Compression fittings - Nipple 24° with O-ring - For compression joint according to DIN EN ISO 8434-1
DIN 3869-1994 型面密封环 Profil sealing rings
DIN 3942-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 Non-soldered compression fittings - Swivel elbows with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
DIN 3943-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 Non-soldered compression fittings - Swivel branch tees with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
DIN 3944-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 Non-soldered compression fittings - L-adaptors with 24° cone connectors and O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
DIN 3945-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用带24度锥形联接器和 'O' 型密封圈的直 Non-soldered compression fittings - Straight stud swivel adaptor with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1
DIN 3946-2002 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用带24度锥形联接器和 'O' 型密封圈的直 Non-soldered compression fittings - Straight reducing swivel adaptors with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1
DIN 4000-7-1984 第7部分:密封垫用物品特性表格设计 Tabular layouts of article characteristics for gaskets
DIN 4060-1998 带弹性密封件的下水道和污水管用接头.对弹性密封件的接头的要求和试验 Joints of sewer and drain pipes with elastomeric seals - Requirements and testing on joints with elastomeric seals
DIN 40768-1969 硷性蓄电池.6V和12V密封式镍镉蓄电池,带胶纸板的钮扣式电池.容量、主要尺寸和技术参数 Alkaline storage batteries; 6 V and 12 V sealed nickel-cadmium batteries, button cells with pasted plates, capacities, main dimensions, technical data
DIN 4102-9-1990 建筑材料和构件易燃性.电缆抗穿透密封.术语 、要求和试验 Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing
DIN 42673-2-1983 IMB3型带滚动轴承全密封风扇冷却鼠笼三相感应电机.相关框架尺寸.防爆高安全"E"型输出功率 Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
DIN 42673-3-1983 IMB3型带滚动轴承全密封风扇冷却鼠笼三相感应电机.相关框架尺寸.防火外壳"d"型输出功率 Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
DIN 42677-2-1983 带滚动轴承的IM B 5、 IMB10、IMB14型全密封风扇冷却鼠笼式三相感应电机.相关框架规格-提高防护安全性"E" Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
DIN 42677-3-1983 带滚动轴承的IM B 5、 IMB10、IMB14型全密封风扇冷却鼠笼式三相感应电机.相关框架规格-防火外壳体“d"型的 Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
DIN 43534-1983 铅蓄电池.免维护、密封、固定电解液.额定容量、电压、主要尺寸、详细结构、要求 Lead storage batteries; maintenance-free, sealed, immobilized electrolyte; rated capacities, voltages, main dimensions, construction-details, requirements
DIN 43539-5-1984 蓄电池.试验.采用栅极板和不流动电解液的免维护密封铅蓄电池 Accumulators; tests; sealed lead storage batteries with grid type plates and immobilized electrolyte, maintenance free; test methods
DIN 442-1970 密封膨胀盖 Sealing Expanding Caps
DIN 443-1970 密封压入盖 Sealing Push-in Caps
DIN 470-1974 密封垫圈 Sealing Washers
DIN 47629-1986 通讯电缆用的压力密封堵塞块.要求和试验 Pressure-tight blockstops for telecommunication cables; requirements, tests
DIN 49984-1954 电照明设备.符合DIN49993 的带法兰边的照明设备玻璃罩的外型密封环 Electric luminaires; profile sealing ring for luminaire glasses with flanged edges according to DIN 49993
DIN 5065-1987 包装.金属及塑料软管用端口塑料密封物 Packaging; plastic closures for metal and plastic tubes
DIN 5080-1978 家用保藏罐和保藏瓶.橡胶密封圈 Preserving jars and bottles for domestic purposes; rubber seal rings
DIN 52451-1-2007 建筑物用密封材料的试验.第1部分:自流平填缝材料质量和体积变化的测定 Testing of sealing materials for buildings - Part 1: Determination of change in mass and volume of self-levelling joint sealants
DIN 52452-1-1989 建筑物密封材料与其他建筑材料的相容性测试 Testing of building sealants for compatibility with construction materials
DIN 52452-2-1993 建筑业中密封材料检验.密封材料的兼容性.与化学制品的兼容性 Testing of sealants in building construction; compatibility of sealants; compatibility with chemicals
DIN 52452-4-1992 建筑结构用密封材料的检验.密封材料的兼容性.与其他防护涂层材料的可混用性 Testing of sealing compounds in building constructions; compatibility of sealing products; compatibility with other protection coatings
DIN 52453-2-1977 房屋结构中密封和装玻璃用嵌缝料的检验.粘合剂的流动.纸过滤法 Testing of sealing compounds for sealing and glazing in building constructions; migration of binder, paper filter method
DIN 52455-1-2003 建筑业密封材料试验.粘合和膨胀试验.第1部分:标准气候、水或高温预处理 Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water,or increased temperatures
DIN 52455-3-1998 建筑结构中密封剂的试验.粘附试验和伸长试验.第3部分:透过玻璃光线的影响 Testing of sealants in building construction - Adhesion and extension test - Part 3: Influence of light through glass
DIN 52459-1981 建筑密封材料的检验.回填材料吸水性的测定.蓄水能力 Testing of building sealants; determination of the water absorption of backfill material; retentive capacity
DIN 52460-2000 密封和窗用玻璃.术语 Sealing and glazing - Terms
DIN 52461-2000 建筑施工中密封化合物的试验.新用的可喷接缝产品的耐雨强度 Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products
DIN 54115-1 Bb.1-2006 无损检验.密封放射性源技术应用射线防护规则.第1部分:γ放射线照相装置的固定和可移动装卸.控制范围的估算 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 1: Stationary and mobile handling for gamma-radiography; Estimating of control regions
DIN 54115-1-2006 无损检验.密封放射性源技术应用射线防护规则.第1部分:γ放射线照相装置的固定和可移动装卸 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 1: Stationary and mobile handling for gamma-radiography
DIN 54115-3-2006 无损检验.密封放射性源技术应用射线防护规则.第3部分:γ放射线照相装置在装卸和运输过程中射线防护的组织 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 3: Organisation of radiation protection during handling and transport for gamma-radiography
DIN 54115-4-2006 无损检验.密封放射性源技术应用射线防护规则.第4部分:γ放射线照相用可移动装置的制造和试验 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 4: Construction and testing of mobile apparatus for gamma-radiography
DIN 54115-5-1992 无损检验.密封放射性源技术应用的辐射防护规则.γ射线照相的辐射预防措施的建立 Non-destructive testing; radiation protection rules for the technical application of sealed radioactive sources; building precautionary measures of radiation for the gamma-radiography
DIN 54115-6-2006 无损检验.密封放射源技术应用射线防护规则.第6部分:γ放射线照相用可移动装置的检验、维修和功能试验 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 6: Inspection, service and functional test of mobile apparatus for gamma-radiography
DIN 5514-3-1980 有轨车辆材料.弹性体.功能组.永久性门窗密封件.窗型材.系列规范 Materials for railway vehicles; elastomers, functional group: permanent door and window seals, specification group
DIN 5514-4-1982 铁路车辆用材料.弹性体.功能组:非永久性门和窗用密封件.规格类别 Materials for railway vehicles; elastomers; functional group: non permanent door and window seals; specification groups
DIN 55479-2000 包装.用压敏胶粘带和胶纸带密封纸板盒和包装箱的种类 Packaging - Types of sealings of cartons and boxes by means of pressure-sensitive adhesive tape and gummed paper tape
DIN 55529-2005 包装.测定软包装材料制密封件的密封接缝强度 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
DIN 5569-1-1997 轨道车辆.带滚柱轴承和密封垫圈的外装式轮对轴承.第1部分:综览和配置 Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 1: Summary and layout
DIN 5569-2-1997 轨道车辆.带滚柱轴承和密封垫圈的外装式轮对轴承.第2部分:零部件 Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 2: Component parts
DIN 5588-1-1988 轨道车辆用压缩空气设备.可法兰连接的压缩空气设备.第1部分:DN 19 和 DN 25 设备用配合尺寸和密封元件 Compressed air equipment for rail vehicles; flangeable compressed air devices; mating dimensions and sealing elements for DN 19 and DN 25 devices
DIN 5588-2-1988 轨道车辆用压缩空气设备.可法兰连接的压缩空气设备.第2部分:DN 7 设备用配合尺寸和密封元件 Compressed air equipment for rail vehicles; flangeable compressed air devices; mating dimensions and sealing elements for DN 7 devices
DIN 58953-7-2003 消毒.消毒材料供应.第7部分:消毒纸、非织造的包装材料、纸袋、耐热和自密封袋和纸带盘的使用 Sterilization - Sterile supply - Part 7: Use of sterilization paper, nonwoven wrapping material, paper bags and heat and self-sealable pouches and reels
DIN 618-2-1993 滚针轴承.密封的带保持架的开端头拔出套 Needle roller bearings; drawn cups with open ends with cage, sealed
DIN 65194-1986 航空和航天.圆形电气连接器用密封塞 Aerospace; sealing plugs for electrical circular connectors
DIN 65203-2001 航空航天系列.弹性体O形密封圈.技术规范 Aerospace series - Elastomeric O-rings - Technical specification
DIN 65229-1979 航空航天.密封垫片.技术规范 Aerospace; gaskets sheets, technical specification
DIN 65262-1-1996 航空航天.密封复合材料.第1部分:多硫化物-聚合物基.交货技术条件 Aerospace - Sealing compounds - Part 1: Polysulphide polymer base; technical specification
DIN 65262-2-1998 航空航天系列.密封化合物.第2部分:偏二氟乙烯-六氟丙烯基.技术规范 Aerospace series - Sealing compounds - Part 2: Vinylidene fluoride and hexafluoropropylene base; technical specification
DIN 65262-3-1996 航空航天系列.密封复合材料.第3部分:硅橡胶基材.交货技术条件 Aerospace series - Sealing compounds - Part 3: Silcone-rubber base; technical specification
DIN 65486-1993 航空航天.结构用紧固件.旋转紧固件的机械特性.压力密封型紧固件总成 Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight
DIN 65493-1993 航空航天.结构紧固件.旋转紧固件.压力密封式紧固件插孔 Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight
DIN 6809-2-1993 临床剂量测定法.密封γ放射源的短距离放射治疗 Clinical dosimetry; Brachytherapy with sealed gamma sources
DIN 6827-2-2003 电离辐射医用记录.第2部分:不密封放射性材料诊断和治疗 Recording of the medical application of ionizing radiation - Part 2: Diagnosis and therapy using unsealed radioactive materials
DIN 6843-2006 搬运医疗设备中未密封的放射性材料的射线防护规则 Radiation protection rules for handling of unsealed radioactive material in medicine
DIN 6844-1-2005 核医疗部门.第1部分:非密封放射源的诊断应用装置和设备的规则 Nuclear medicine departments - Part 1: Rules for the installation and equipment for diagnostic applications of unsealed radioactive sources
DIN 6844-2-2005 核医疗部门.第2部分:非密封放射源的治疗应用装置和设备的规则 Nuclear medicine departments - Part 2: Rules for the installation and equipment for therapeutic applications of unsealed radioactive sources
DIN 6871-2-2005 正电子放射层析X射线摄影法用回旋加速器系统.第2部分:辐射防护迷宫式密封体和护墙入口 Cyclotron systems for positron emission tomography - Part 2: Radiation protection labyrinths and wall entrances
DIN 69001-14-1981 机床.多轴头.A至D型轴密封件组件 Machine tools; Multi-spindle heads; Assemblies, Spindle seals Types A to D
DIN 69001-21-1994 机床.多轴头.E至P型轴密封组件. Machine tools; multi-spindle heads; assemblies, spindle seals types E to P
DIN 71511-1992 椭圆法兰的密封垫 Gaskets for oval flanges
DIN 74286-1988 气压制动系统.双管气压制动系统的软管联结器的密封圈 Air braking systems; packing rings for hose couplings for double line braking systems
DIN 7584-1980 家用安装水管配件.压力为10巴的平密封垫带外螺纹的钢管接管嘴 Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar
DIN 7585-1980 家用安装水管配件.压力为10巴的平密封套管 Water-fittings for house installation; sleeves, flat sealing up to work pressure of 10 bar
DIN 7588-1994 家装设备用水管配件.平密封螺旋接头.压力10巴的一端带内螺纹,另一端带钢管喷嘴、铜管喷嘴或套管 Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
DIN 7589-1994 家装设备用水管配件.平密封螺旋接头.压力10巴的一端带外螺纹,另一端带钢管喷嘴、铜管喷嘴和套管 Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
DIN 7603-2001 密封环 Sealing rings
DIN 7750-1979 瓶子杆式塞用橡胶密封圈 Rubber sealing rings for lever stoppers of bottles
DIN 7754-1978 果汁瓶和球形瓶用密封盖 Sealing caps for grape-juice bottles and balloons
DIN 78027-1979 轮胎气门(带O形密封圈)中无内胎卡箍 Tubeless clamp in tyre valves (with O-ring seal)
DIN 7863-1983 非泡沫弹性体装玻璃和板状密封条.交货技术条件 Non cellular elastomer glazing and panel gaskets; technical delivery conditions
DIN 7865-1-1982 混凝土接缝密封用的弹性填缝片.形状和尺寸 Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions
DIN 7865-2-1982 混凝土接缝密封用的弹性填缝片.对材料的要求和检验 Elastomeric joint sealing strip for sealing joints in concrete; Material requirements and testing
DIN 8063-4-1983 未增塑聚氯乙烯压力管道用管连接组件和接头.内外螺母、法兰盘、密封件.尺寸 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
DIN 82331-1998 船舶上的通风设备.符合DIN 82330的圆形法兰盘用密封垫 Ventilation plants on ships - Gaskets for round flanges according to DIN 82330
DIN 8253-4-1992 表用圆形玻璃盖.矿物玻璃.I型密封垫片.尺寸 Round glasses for watches; mineral glasses; I-gasket, dimensions
DIN 83106-1984 船上重型铰链门和舱口用的密封垫片 Gaskets for heavy hinged doors on ships and for hatches
DIN 83403-2007 船舶贮舱和液体舱的人孔盖.密封件 Manhole covers for bunkers and tanks on ships - Seals
DIN 83419-1987 挡盖的弹性密封垫 Elastomer gaskets for covers
DIN 86056-2001 钢管和铜或铜合金管用锁紧螺母和密封圈的引入管套筒 Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
DIN 86071-1992 法兰用全密封面垫片.公称压力为6、10、16、25 Full face gaskets for flanges; nominal pressures 6, 10, 16, 25
DIN 86072-1992 船用排气管道.密封垫 Exhaust gas lines on ships; gaskets
DIN 86129-1986 充料管和探测管用焊接盖板螺纹盖的螺塞和扁密封圈 Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
DIN 86263-2000 Y型,软密封,承口连接的船用直通阀.DN15-DN50,PN16 Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16
DIN 86264-2000 Y型,软密封,带法兰的短型船用直通阀.DN15-DN200 Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200
DIN 86265-2000 Y型,软密封,普通型带法兰的船用直通阀.DN15-DN200 Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200
DIN 87155-1954 灰铸铁粗滤器.密封圈 Grey cast-iron coarse filters; sealing rings
DIN 8905-1-1983 带密封和半密封压缩机的制冷设备用管道.外径54mm以下.交货技术条件 Tubes for refrigerating systems with hermetic and semi-hermetic compressors; outside diameter up to 54 mm; technical delivery conditions
DIN 8905-3-1983 带密封和半密封压缩机的制冷系统用管道.毛细节流阀的补充交货技术条件 Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
DIN 8914-1990 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的90°锥体密封环和密封盖 90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems
DIN 89280-1-1992 电缆和软线用密封套.组件 Glands for cables and cords; assembly
DIN 89280-2-1992 电缆和导线用密封套.零件 Glands for cables and cords; component parts
DIN 89284-2007 符合DIN 89280的安装孔和密封管用帽螺钉.德文和英文本 Cap srews for mounting holes and glands according to DIN 89280; Text in German and English
DIN 8929-1987 家用制冷机和冷冻机的密封压缩机的连接 Connections on hermetically sealed compressors for domestic refrigerators and freezers
DIN 89345-2006 电缆和绝缘电线用密封套的接地插入件 Earthing inserts for glands for electrical cables and insulated wires
DIN 89347-1992 电缆和软电线的密封套的垫圈 Washers for glands for cables and cords
DIN 89349-1992 电缆和软电线密封套的垫片 Gaskets for glands for cables and cords
DIN 8964-2-2002 制冷系统循环部件.第2部分:密封系统.要求 Circuit elements for refrigerating systems - Part 2: Sealed systems; Requirements
DIN EN 10226-2-2005 螺纹上有压力密封接缝的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸、公差和名称与符号 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
DIN EN 10226-3 Berichtigung 1-2006 用螺纹密封的管螺纹.第2部分:用极限量规检验 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
DIN EN 10226-3-2005 螺纹上有压力密封接缝的管螺纹.第3部分:通过极限量规验证 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
DIN EN 10246-1-1996 钢管无损检测.第1部分:无缝和焊接钢管(埋弧焊除外)密封性自动电磁检验 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996
DIN EN 10246-2-2000 钢管的无损检验.第2部分:证明液压渗漏密封性的无缝和焊接(埋弧焊接除外)的奥氏体和铁素体/奥氏体钢管的自动 Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:2000
DIN EN 1107-1-1999 防水软板.尺寸稳定性测定.第1部分:屋顶密封沥青板 Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing; German version EN 1107-1:1999
DIN EN 1108-1999 防水软板.屋顶密封沥青板.温度循环形状稳定性测定 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes; German version EN 1108:1999
DIN EN 1109-1999 防水软板.屋顶密封沥青板.冷弯性能测定 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature; German version EN 1109:1999
DIN EN 1110-1999 防水软板.屋顶密封沥青板.耐热性测定 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature; German version EN 1110:1999
DIN EN 1119-1996 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和配件.密封性和耐柔性连接和铰链连接磨损能力试验方法 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996
DIN EN 116207-1995 空白详细规范:密封式继电器.用于恶劣的固定环境条件(116205).用于恶劣的易变环境条件(116206).用于恶劣的空 Blank detail specification: Hermetically sealed relays - For severe static environmental conditions (116205); for severe mobile environmental conditions (116206); for severe airborne environmental conditions (116207); German version EN 116205/116206/116207:1995
DIN EN 116303-1994 空白详细规范.经质量认证的高负荷机电的全有或全无继电器( 密封式 5A至25A ) Blank detail specification; electromechanical all-or-nothing heavy load relays of assessed quality (hermetically sealed, 5 A to 25 A); german version EN 116303:1993
DIN EN 1229-1996 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.管壁短期内压密封性验证试验方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996
DIN EN 12294-1999 塑料管道系统.热水和冷水系统.真空密封性的检验方法 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999
DIN EN 12308-1998 液体天然气设施和设备.液体天然气管道使用的法兰连接件的密封垫片的适用性试验 Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998
DIN EN 12365-1-2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第1部分:性能要求和分类 Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification; German version EN 12365-1:2003
DIN EN 12365-2-2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第2部分:线性压力试验方法 Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods; German version EN 12365-2:2003
DIN EN 12365-3-2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第3部分:弯曲回复试验方法 Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method; German version EN 12365-3:2003
DIN EN 12365-4-2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第4部分:加速老化后回复的试验方法 Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method; German version EN 12365-4:2003
DIN EN 12373-4-1999 铝和铝合金.阳极处理.第4部分:采用在酸处理之前用着色点滴试验密封后阳极化氧化涂层的吸收力损失量的估计 Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998
DIN EN 12373-5-1999 铝和铝合金.阳极处理.第5部分:用测量公差方法对密封的阳极处理氧化涂层进行质量评定 Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
DIN EN 12373-6-1999 铝和铝合金.阳极处理.第6部分:在预先未进行酸处理情况下涂层在铬酸/磷酸溶液中浸渍以后通过测定质量损耗对 Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 12373-6:1998
DIN EN 12373-7-2002 铝及铝合金.阳极氧化.第7部分:通过磷酸和铬酸溶液浸渍酸处理后测量质量损失评估密封阳极氧化涂层的质量; 德 Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373-7:2002
DIN EN 12560-2-2001 法兰及其接头.分级标识法兰用垫圈.第2部分:钢法兰用绕制螺旋形密封垫 Flanges and their joints - Gaskets for class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges; German version EN 12560-2:2001
DIN EN 12690-1999 生物技术.轴密封的性能标准 Biotechnology - Performance criteria for shaft seals; German version EN 12690:1999
DIN EN 12713-2000 标称容积为20升至60升的塑料容器用带有螺纹的盖子密封系统 Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l; German version EN 12713:2000
DIN EN 12756-2001 机械密封件.主要尺寸、名命和材料编码 Mechanical seals - Principal dimensions, designation and material codes; German version EN 12756:2000
DIN EN 1277-2004 塑料管道系统.用于地下无压装置的热塑性管道系统.橡胶密封环连接件密封性的检验方法 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints; German version EN 1277:2003
DIN EN 1279-4-2002 建筑物用玻璃.绝缘玻璃组件.第4部分:边缘密封件的物理属性的试验方法; 德文版本 EN 1279-4:2002 Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals; German version EN 1279-4:2002
DIN EN 12835-2001 密封百页窗.透气性试验 Airtight shutters - Air permeability test; German version EN 12835:2000
DIN EN 12928-2000 总容积17l-230升的钢桶嵌入法兰式密封系统 Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l; German version EN 12928:2000
DIN EN 13022-1-2006 建筑玻璃.建筑密封玻璃.第1部分:支撑和无支撑单层和多层玻璃的建筑密封玻璃系统的玻璃产品 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing; English version of DIN EN 13022-1:2006-08
DIN EN 13022-2-2006 建筑玻璃.建筑密封玻璃.第2部分:安装规范 Glass in building - Structural sealant glazing - Part 2: Assembly rules; English version of DIN EN 13022-2:2006-08
DIN EN 13090-2001 建筑物燃气管道螺纹接头再密封方法 Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000
DIN EN 1330-8-1998 无损检验.专术语.第8部分:密封试验的术语.三种语言版本 Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing; Trilingual version EN 1330-8:1998
DIN EN 1366-4-2006 服务设施的防火试验.第4部分:线性接缝密封 Fire resistance tests for service installations - Part 4: Linear joint seals English version of DIN EN 1366-4:2006-08
DIN EN 13880-1-2003 热用密封胶.第1部分:25鳦时密度测定的试验方法 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN EN 13880-10-2003 热用密封胶.第10部分:连续伸展和压缩后测定粘结性的试验方法 Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression; German version EN 13880-10:2003
DIN EN 13880-11-2003 热用密封胶.第11部分:功能试验中沥青试验块制备以及与沥青路面兼容性测定的试验方法 Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements; German version EN 13880-11:2003
DIN EN 13880-12-2003 热用密封胶.第12部分:粘结试验中混凝土试验块制造的试验方法(配方法) Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods); German version EN 13880-12:2003
DIN EN 13880-13-2003 热用密封胶.第13部分:不连续伸展性测定的试验方法(粘性试验) Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test); German version EN 13880-13:2003
DIN EN 13880-2-2003 热用密封胶.第2部分:25鳦时针入度测定的试验方法 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C; German version EN 13880-2:2003
DIN EN 13880-3-2003 热用密封胶.第3部分:渗透性和回复性(回弹性)测定的试验方法 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German version EN 13880-3:2003
DIN EN 13880-4-2003 热用密封胶.第4部分:耐热性测定的试验方法.渗透值的变化 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value; German version EN 13880-4:2003
DIN EN 13880-5-2004 热用密封胶.第5部分:抗流动性测定的试验方法 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German version EN 13880-5:2004
DIN EN 13880-6-2004 热用密封胶.第6部分:试验用样品制备的试验方法 Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
DIN EN 13880-7-2003 热用密封胶.第7部分:密封胶的功能试验 Hot applied joint sealants - Part 7: Function testing of joint sealants; German version EN 13880-7:2003
DIN EN 13880-8-2003 热用密封胶.第8部分:浸入燃料后耐燃料密封胶重量变化测定的试验方法 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion; German version EN 13880-8:2003
DIN EN 13880-9-2003 热用密封胶.第5部分:与沥青路面兼容性测定的试验方法 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements; German version EN 13880-9:2003
DIN EN 14187-1-2003 冷用密封胶.第1部分:固化速率测定的试验方法 Cold applied joint sealants - Part 1: Test method for the determination of rate of cure; German version EN 14187-1:2003
DIN EN 14187-2-2003 冷用密封胶.第2部分:不粘时间测定的试验方法 Cold applied joint sealants - Part 2: Test method for the determination of tack free time; German version EN 14187-2:2003
DIN EN 14187-3-2003 冷用密封胶.第3部分:自动找平特性测定的试验方法 Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties; German version EN 14187-3:2003
DIN EN 14187-4-2003 冷用密封胶.第4部分:浸入试验燃料后质量和体积变化测定的试验方法 Cold applied joint sealants - Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel; German version EN 14187-4:2003
DIN EN 14187-5-2003 冷用密封胶.第5部分:测定耐水解作用的试验方法 Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis; German version EN 14187-5:2003
DIN EN 14187-6-2003 冷用密封胶.第6部分:浸入化学液体后粘合力/粘合特性测定的试验方法 Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids; German version EN 14187-6:2003
DIN EN 14187-7-2003 冷用密封胶.第7部分:耐火性测定的试验方法 Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame; German version EN 14187-7:2003
DIN EN 14187-8-2003 冷用密封胶.第8部分:用紫外线辐射法进行人工气候老化测定的试验方法 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2003
DIN EN 14187-9-2006 冷用接缝密封胶.试验方法.第9部分:接缝密封胶的功能试验 Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants English version of DIN EN 14187-9:2006-05
DIN EN 14188-1-2004 接缝填充物和密封胶.第1部分:热用密封胶的规范 Joint fillers and sealants - Part 1: Specifications for hot applied sealants; German version EN 14188-1:2004
DIN EN 14188-2-2005 接缝填充物和密封胶.第2部分:冷用密封胶的规范 Joint fillers and sealants - Part 2: Specifications for cold applied sealants; German version EN 14188-2:2004
DIN EN 14188-3-2006 接缝填充物和密封胶.第3部分:成形接缝密封件规范 Joint fillers and sealants - Part 3: Specifications for preformed joint seals English version of DIN EN 14188-3:2006-04
DIN EN 14241-1-2005 烟囱.弹性密封件和弹性密封剂.材料要求和试验方法.第1部分:烟道内衬密封 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners; German version EN 14241-1:2005
DIN EN 1448-1997 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.抗拉套管和顶尖与弹性体密封件连接的结构类型检验方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996
DIN EN 14582-2007 废弃物的特性.卤素含量和硫含量.密封设备中氧的燃烧和测定方法 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods; German version EN 14582:2007
DIN EN 14741-2006 热塑管和管道系统.地下非压力设施用接头.通过评估密封压力测定弹性密封件接头的长期密封性能的试验方法 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure English version of DIN EN 14741:2006-05
DIN EN 14840-2005 接缝填充剂和密封胶.预制接缝密封件的试验方法;德文版本 EN 14840-2005 Joint fillers and sealants - Test methods for preformed joint seals; German version EN 14840:2005
DIN EN 14989-1-2007 烟囱.密封房间加热用金属烟囱和独立材料暖风供气管的要求和试验方法.第1部分:C6型设施用垂直送空气/燃气风 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances; German version EN 14989-1:2007
DIN EN 1514-1-1997 法兰盘及其连接件.有PN标识的法兰盘用密封件尺寸.第1部分:带或不带衬垫的非金属材料制扁平密封件 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997
DIN EN 1514-3-1997 法兰盘及其连接件.有PN标识的法兰盘用密封件尺寸.第3部分:有PTFE外罩的非金属软质密封件 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 1514-3:1997
DIN EN 1514-4-1997 法兰盘及其连接件.有PN标识的法兰盘用密封件尺寸.第4部分:钢法兰用带波纹的平面或开槽外廓金属密封件 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges; German version EN 1514-4:1997
DIN EN 1514-8-2005 法兰及其连接件.PN标示法兰用垫圈的尺寸.第8部分:带槽法兰用聚酯O形密封圈 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges; German version EN 1514-8:2004
DIN EN 15208-2007 危险物品的运输罐.密封包装运输系统.工作原理和接口规范 Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications; German version EN 15208:2007
DIN EN 15287-1-2007 烟囱.烟囱的设计、安装和试用.第1部分:非密封房间加热器具用烟囱 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances; German version EN 15287-1:2007
DIN EN 15434-2006 建筑玻璃.建筑和/或抗紫外线密封材料的产品标准(用于暴露密封的建筑密封打光和/或绝缘玻璃单元) Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) English version of DIN EN 15434:2006-08
DIN EN 1591-1 Bb.1-2001 法兰及其接头.密封圈法兰接头设计规则.背景信息 Flanges and their joints - Design rules for gasketed circular flange connections - Background information
DIN EN 1680-1997 塑料管道系统.聚乙烯(PE)管道系统用阀门.操作机构弯曲时和弯曲后密封性试验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 210-2000 钢筒.最小总容量为216.5升的非拆卸式盖盖(密封式)筒; 德文版本 EN 210:1999 Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l; German version EN 210:1999
DIN EN 2591-322-1998 航空航天系列.电气和光学仪器连接元件.试验方法.第322部分:密封性试验 Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998
DIN EN 2591-324-1998 航空航天系列.电气和光学仪器连接元件.试验方法.第324部分:界面密封试验 Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing; German version EN 2591-315:1998
DIN EN 2591-407-1999 航空航天系列.电器和光学仪器连接元件.试验方法.第407部分:触点固定系统和密封的耐久性 Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals; German version EN 2591-407:1999
DIN EN 2591-512-2003 航空航天系列.光电连接元件.试验方法.第512部分:密封连接器外壳固定接头有效性 Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002
DIN EN 2591-6323-2002 航空航天系列.电气和光学连接元件.试验方法.第6323部分:光学元件.热冲击(密封装置); 德文版本 EN 2591-6323 Aerospace series - Elements of electrical and optical connection; Test methods - Part 6323: Optical elements; Thermal shock (hermetically sealed devices); German version EN 2591-6323:2002
DIN EN 2591-6324-2003 航空航天系列.光电连接件.试验方法.第6324部分:光学元件.层间密封 Aerospace series - Elements of electrical and optical connection; Test methods - Part 6324: Optical elements; Interfacial sealing; German and English version EN 2591-6324:2001
DIN EN 2607-2007 航空航天系列.用锁住方式连接适配器用O型密封圈.测量 Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005
DIN EN 26927-1991 建筑结构.连接产品.密封剂.词汇 Building construction; jointing products; sealants; vocabulary (ISO 6927:1981); german version EN 26927:1990
DIN EN 28394-1991 建筑结构.连接产品.单组分密封剂可挤压性的测定(ISO 8394:1988) Building construction; jointing products; determination of extrudability of one-component sealants (ISO 8394:1988); german version EN 28394:1990
DIN EN 2881-2007 航空和航天系列.米制系列MOS2润滑的钝化耐腐蚀、耐燃钢沉头双耳密封锁紧浮动地脚螺母.等级:900MPa/120℃ Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006
DIN EN 29048-1991 建筑结构.连接产品.用标准化的仪器测定密封剂的可挤压性(ISO 9048:1987) Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987); german version EN 29048:1990
DIN EN 29885-1994 广口玻璃仪器.瓶口密封面不平度偏差.试验方法 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994
DIN EN 2997-5-1997 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第5部分:带正方安装 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 5: Hermetic, square flange receptacle; product standard; German version EN 2997-5:1997
DIN EN 2997-6-1997 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第6部分:带锁紧螺母 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German version EN 2997-6:1997
DIN EN 2997-7-1997 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第7部分:带圆形焊接 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 7: Hermetic receptacle with round flange attached by soldering or brazing; product standard; German version EN 2997-7:1997
DIN EN 3081-2002 航空航天系列.钛合金管连接件 8°30'.带动态光束密封端头的修理用焊接箍; 德文版本 EN 3081:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001
DIN EN 3243-2002 航空航天系列.钛合金8°30'管连接件.带动态束密封端的金属圈焊接; 德文版本 EN 3243:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrule welded, with dynamic beam seal end; German version EN 3243:2001
DIN EN 3269-2006 航空航天系列.8°30'钛合金管接头.带动态梁密封端的单头卡套.德文和英文版本EN 3269-2001 Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001
DIN EN 3272-2006 航空航天系列.8°30'管接头.焊接箍用动态梁密封端.几何构型.德文和英文版本EN 3272-2001 Aerospace series - Pipe coupling 8°30' - Dynamic beam seal end for ferrule, welded - Geometric configuration; German and English version EN 3272:2001
DIN EN 3273-2006 航空航天系列.钛合金管连接件8°30'.弯头、十字管和三通管用动梁密封端头.几何配置 Aerospace series - Pipe coupling 8°30′ - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration; German and English version EN 3273:2001
DIN EN 3275-2002 航空航天系列.可达28000kPa 的 8°30'管连接件.动态光束密封.公制系列.技术规范; 德文和英文版本 EN 3275:2 Aerospace series - Pipe coupling 8°30 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002
DIN EN 3373-012-2007 航空航天系列.电导体压接用终端盒和内嵌连接线.第012部分:温度<150℃的铜导体压接用绝缘和密封的内嵌连接 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 °C - Product standard; German and English version EN 3373-012:2005
DIN EN 3545-001-2007 航空航天系列.工作温度-55℃~175℃后部密封或非密封的塑料外壳连接的矩形连接器.技术规范 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 001: Technical specification; German and English version EN 3545-001:2005
DIN EN 3545-002-2006 航空航天系列.工作温度-55℃~175℃后部密封或非密封的、塑料壳体固定装置矩形连接器.第002部分:性能和接触 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 002: Specification of performance and contact arrangements; German and English version EN 3545-002:2005
DIN EN 3545-003-2006 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.第003部分:插孔接点的连接器. Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard; German and English version EN 3545-003:2005
DIN EN 3545-004-2006 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.第004部分:插塞接点的连接器. Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard; German and English version EN 3545-004:2005
DIN EN 3545-005-2007 航空航天系列.工作温度为-55℃~175℃塑料壳体锁紧装置后部密封或非密封的矩形电连接器.第005部分:不固定外 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard; German and English version EN 3545-005:2006
DIN EN 3545-006-2007 航空航天系列.工作温度为-55℃~175℃塑料壳体锁紧装置后部密封或非密封的矩形电连接器.第006部分:固定外壳 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle) - Product standard; German and English version EN 3545-006:2006
DIN EN 3545-007-2006 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.第007部分:电缆夹.产品标准 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard; German and English version EN 3545-007:2005
DIN EN 3561-2004 航空航天系列.钛合金管连接件8°30'.在管端焊接和轧制的带动梁密封端头的箍 Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end; German and English version EN 3561:2001 + AC:2003
DIN EN 3646-005-2007 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第005部分:方形法兰安装密封插座.产品 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard; German and English version EN 3646-005:2006
DIN EN 3646-006-2007 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第006部分:锁紧螺母安装密封插座.产品 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard; German and English version EN 3646-006:2006
DIN EN 3646-007-2007 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第007部分:圆形法兰焊接或铜焊接安装密 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard; German and English version EN 3646-007:2006
DIN EN 3660-004-2007 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第004部分:EN2997和EN4067带应变消除夹的非密封直形A Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard; German and English version EN 3660-004:2006
DIN EN 3660-005-2007 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第005部分:EN2997和EN4967中带应变消除夹未密封的A型9 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90° unsealed, with clamp strain relief for EN 2997 and EN 4967 - Product standard; German and English version EN 3660-005:2006
DIN EN 3708-003-2007 航空航天系列.模块化互连系统.终端连接系统.第003部分:密封移动式反馈模块版本.产品标准 Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard; German and English version EN 3708-003:2006
DIN EN 3708-004-2007 航空航天系列.模块化互连系统.终端连接系统.第004部分:非密封移动式反馈模块版本.产品标准 Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard; German and English version EN 3708-004:2006
DIN EN 3708-005-2007 航空航天系列.模块化互连系统.终端连接系统.第005部分:密封和非密封反馈模块版本用带附件的框架.产品标准 Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard; German and English version EN 3708-005:2006
DIN EN 3746-2006 航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80IRHD Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2003
DIN EN 3747-2005 航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.技术规范 Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification; German and English version EN 3747:2003
DIN EN 3748-2002 航空航天系列.O形密封圈凹槽.尺寸; 德文和英文版本 EN 3748:2001 Aerospace series - O-ring grooves - Dimensions; German and English version EN 3748:2001
DIN EN 3867-2007 航空航天系列.管连接件、活动法兰和密封件.TI-P64001型钛合金法兰 Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001; German and English version EN 3867:2004
DIN EN 3868-2007 航空航天系列.管连接件、活动法兰和密封件.TI-P64001型钛合金焊接法兰联接件 Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001; German and English version EN 3868:2004
DIN EN 3869-2007 航空和航天系列.管道联接件、活动法兰和密封件.铝合金碳氟橡胶和电枢密封件 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; German and English version EN 3869:2004
DIN EN 4054-2006 航空航天系列.管连接件、活动法兰和密封件.氟烃橡胶密封件和铝合金附件.技术规范 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification; German and English version EN 4054:2004
DIN EN 415-3-2000 包装机械的安全性.第3部分:成型,装填和密封机 Safety of packaging machines - Part 3: Form, fill and seal machines; German version EN 415-3:1999
DIN EN 4529-001-2007 航空航天系列.电气和光学连接元件.密封插头.第001部分:技术规范 Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification; German and English version EN 4529-001:2006
DIN EN 4529-002-2007 航空航天系列.电气和光学连接元件.密封插头.第002部分:产品标准的索引 Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002: Index of product standards; German and English version EN 4529-002:2006
DIN EN 4529-003-2007 航空航天系列.电气和光学连接元件.密封插头.第003部分:T级.产品标准 Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard; German and English version EN 4529-003:2006
DIN EN 455-1-2001 一次性医用手套.第1部分:密封性要求和检验 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2000
DIN EN 4550-4-2004 航空航天系列.管道连接件37设计构造.英制.第4部分:承口密封端 Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 4: Female sealing ends; German and English version EN 4550-4:2003
DIN EN 50216-3-2007 电力变压器和电抗器配件.第3部分:密封液浸式变压器和无气垫电抗器用保护继电器 Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; German version EN 50216-3:2002 + A2:2006
DIN EN 50262-2005 电气装置用电缆密封套 Cable glands for electrical installations; German version EN 50262:1998 + A1:2001 + A2:2004
DIN EN 50411-2-2-2007 光纤通信系统用纤维形成体和闭路.产品规范.第2-2部分:S&A类用1型密封平盖纤维接缝闭路 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A; German version EN 50411-2-2:2007
DIN EN 50411-2-4-2006 用于光纤传递系统的纤维形成体和闭路.产品规范.第2-4部分:S&A类密封圆盖纤维接缝闭路类型1 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A; German version EN 50411-2-4:2006
DIN EN 549-1995 燃气灶具和燃气器具用密封件和膜片的橡胶材料; 德文版本 EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipmemt; German version EN 549:1994
DIN EN 60068-2-17-1995 环境试验.第2部分:试验.试验Q:密封 Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994); German version EN 60068-2-17:1994
DIN EN 60191-6-8-2002 半导体器件的机械标准化.第6-8部分:表面安装的半导体器件包外形图纸制备的一般规则.玻璃密封陶瓷方形扁平封 Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for glass sealed ceramic quad flatpack (G-QFP) (IEC 60191-6-8:2001); German version EN 60191-6-8:2001
DIN EN 60512-12-6-1996 电子设备用机电元件.基本试验规程和测量方法.第12部分:可钎焊性试验.第6节:试验12f:机械钎焊中耐溶剂和清洗 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering (IEC 60512-12-6:1996); German version EN 60512-12-6:1996
DIN EN 60512-14-2-2006 电子设备用连接器.试验和测量.第14-2部分:密封试验.试验14b:密封.细微的漏气(IEC 60512-14-2:2006) Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006
DIN EN 60512-14-4-2006 电子设备用连接器.试验和测量.第14-4部分:密封试验.试验14d:浸入.防水(IEC 60512-14-4:2006) Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006); German version EN 60512-14-4:2006
DIN EN 60512-14-5-2006 电子设备连接器.试验和测量.第14-5部分:密封试验.试验14e:低气压下浸渍(IEC 60512-14-5:2006) Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006); German version EN 60512-14-5:2006
DIN EN 60512-14-6-2006 电子设备用连接器.试验和测量.第14-6部分:密封试验.试验14f:界面密封(IEC 60512-14-6:2006) Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006
DIN EN 60512-14-7-1998 电子设备的机电元件.基本试验规程和测量方法.第14部分:密封试验.第7节:14g试验:喷射冲击水 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests; Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997); German version EN 60512-14-17:1998
DIN EN 60730-2-4-2003 家用和类似用途自动电控制器.第2-4部分:密封和半密封的电动压缩机用防热电动保护器特殊要求 Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type (IEC 60730-2-4:1990, modified + A1:1994 + A2:2001, modified); German version EN 60730-2-4:1993 + A1:1998 + A2:2002
DIN EN 60749-8-2003 半导体器件.机械和气候试验方法.第8部分:密封 Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing (IEC 60749-8:2002 + Corr. 1:2003 + Corr. 2:2003); German version EN 60749-8:2003
DIN EN 61076-7-100-2007 电子设备连接器.产品要求.第7-100部分:电缆端口附件.由高负载矩形或圆形连接器罩和密封系统集成部件组成的 Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system (IEC 61076-7-100:2006); German version EN 61076-7-100:2006
DIN EN 61150-1995 碱性二次电池和电池组.密封镍镉扣式可充电整体电池组 Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design (IEC 61150:1992 + Corrigendum 1992); German version EN 61150:1993
DIN EN 61300-2-23-1998 光纤互联装置和无源部件.基本试验和测量程序.第2-23部分:试验:光纤器件非加压封闭的密封性 (IEC 61300-2-23 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests: Sealing for non-pressurized closures of fibre optic devices (IEC 61300-2-23:1995); German version EN 61300-2-23:1997
DIN EN 61300-2-25-1998 光纤互联装置和无源部件.基本试验和测量程序.第2-25部分:试验:封闭密封的耐久性 (IEC 61300-2-25:1995); 德 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests: Sealing endurance for closures (IEC 61300-2-25:1995); German version EN 61300-2-25:1997
DIN EN 61300-2-38-2007 纤维光学互连器件和无源元件.基本试验和测量程序.第2-38部分:试验.加压纤维光学接线盒的密封 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006); German version EN 61300-2-38:2006
DIN EN 61857-22-2003 电气绝缘系统.线.第22部分:密封圈模型特殊要求..线绕电气绝缘系统(EIS) Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coil model; Wire-wound electrical insulation system (EIS) (IEC 61857-22:2002); German version EN 61857-22:2002
DIN EN 61951-2-2004 含碱性或其他非酸性电解质的蓄电池和蓄电池组.便携密封可再充电单电池.第2部分:镍金属氢化物 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride (IEC 61951-2:2003); German version EN 61951-2:2003
DIN EN 61959-2004 含有碱性或其他非酸性电解质的蓄电池和蓄电池组.密封便携式蓄电池和蓄电池组的机械试验 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries (IEC 61959:2004); German version EN 61959:2004
DIN EN 62133-2003 含碱性或其它非酸性电解液的蓄电池和蓄电池组.便携式密封蓄电池和蓄电池组的安全要求 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications (IEC 62133:2002); German version EN 62133:2003
DIN EN 62339-1-2007 表面安装流体分配部件用模块元部件接口.第1部分:弹性密封件 Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals (IEC 62339-1:2006); German version EN 62339-1:2007
DIN EN 624-2001 液化石油汽器具专用规范.车船舱室密封液化石油汽加热设备 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats; German version EN 624:2000
DIN EN 681-1-2006 弹性密封件.给排水管道连接密封件材料要求.第1部分:硫化橡胶(包括修改件A1-1998 + A2-2002 + A3-2005和技术 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber(includes Amendments A1:1998 + A2:2002 + A3:2005 and Corrigendum AC:2002); English version of DIN EN 681-1:2006-11
DIN EN 681-2-2006 弹性体密封件.给排水用管道连接密封件的材料要求.第2部分:热塑性弹体(包括修改件A1-2002 + A2-2005) Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-2:2006-11
DIN EN 681-3-2006 弹性体密封件.给排水用管道连接密封件的材料要求.第3部分:硫化多孔橡胶材料(包括修改件A1-2002 + A2-2005) Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-3:2006-11
DIN EN 681-4-2006 弹性体密封件.给排水用管道连接密封件的材料要求.第4部分:聚氨酯铸塑密封件(包括修改件A1-2002 + A2-2005) Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-4:2006-11
DIN EN 682-2006 弹性体密封件.输送气体和烃类液体的管道和配件用密封件的材料要求 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids (includes Amendment A1:2005); English version of DIN EN 682:2006-10
DIN EN 713-1994 塑料管道系统.管接头和聚烯烃压力管间的机械连接.在内压和弯曲下密封性的试验方法 Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993
DIN EN 714-1994 热塑管道系统.压力管道和模压管件之间无末端承载的橡胶密封圈连接件.无端部拉力的流体静力内压力下的密封性 Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
DIN EN 715-1994 热塑塑料管道系统.小直径压力管和管接头之间承载端部的连接.在水内压力下(包括端头推力)密封试验方法 Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994
DIN EN 751-1-1997 接触第1,第2及第3族气体以及热水的金属螺纹连接密封材料.第1部分:厌氧密封材料 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds; German version EN 751-1:1996
DIN EN 751-2-1997 与第1,第2及第3族气体及热水接触的金属螺纹连接部位用的密封材料.第2部分:非时效硬化连接化合物 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds; German version EN 751-2:1996
DIN EN 751-3-1997 与第1,第2及第3族气体及热水接触的金属螺纹连接部位用的密封材料.第3部分:非烧结的PTFE密封带 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes; German version EN 751-3:1996
DIN EN 803-1994 塑料管道系统.压力管道用橡胶密封圈连接件的热塑喷铸管件.无端部拉力的抗瞬时内压的试验方法; 德文版本 EN Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
DIN EN 868-10-2000 要进行消毒的医疗器械系统和包装材料.第9部分:用于生产可热密封的袋、卷轴和盖子的聚烯烃涂胶非织物材料.要 Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and test methods; German version EN 868-10:2000
DIN EN 868-7-1999 计划进行消毒医疗装置的包装材料和包装系统.第7部分:用环氧乙烷或射线方法进行消毒时使用的可热密封的医药 Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-7:1999
DIN EN 868-9-2000 要消毒的医疗装置系统和包装材料.第9部分:用于生产可热密封的袋,卷轴和盖子的聚烯烃未涂覆非织物材料.要求 Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and tests methods; German version EN 868-9:2000
DIN EN 911-1995 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头的连接.外部静力液压条件下的防漏试验方法; Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
DIN EN 917-1997 塑料管道系统.热塑阀门.耐内压和密封性试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN EN 993-13-1995 密封成形耐火产品试验方法.第13部分:试验室用测温锥基准角规范 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use; German version EN 993-13:1995
DIN EN 993-18-2002 密封成形耐火制品试验方法.第18部分:用真空湿法测定颗粒物体积密度 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN ISO 10563-2005 房屋建筑.密封胶.质量和体积变化的测定 Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); German version EN ISO 10563:2005
DIN EN ISO 10590-2005 房屋建筑.密封胶.浸水后在保持延伸状态下测定密封胶的拉伸性能 Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005); German version EN ISO 10590:2005
DIN EN ISO 10591-2005 房屋建筑.密封胶.浸水后密封胶的粘结/粘合性能测定 Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005); German version EN ISO 10591:2005
DIN EN ISO 11431-2003 房屋建筑.连接件.密封胶受热、遇水和透过玻璃的人造光照射后粘合力测定 Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002); German version EN ISO 11431:2002
DIN EN ISO 11432-2005 房屋建筑.密封胶.耐压性测定 Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005); German version EN ISO 11432:2005
DIN EN ISO 11546-1-1996 声学.密封罩隔声性能测定.第1部分:实验室测量(申报用) Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995); German version EN ISO 11546-1:1995
DIN EN ISO 11546-2-1996 声学.密封罩隔声性能测定.第2部分:验收和验证现场测量 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:1995
DIN EN ISO 11600-2004 房屋建筑.连接件.密封件的分类和要求 Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002); German version EN ISO 11600:2003
DIN EN ISO 11607-2-2006 最后灭菌的医疗器械的包装.第2部分:组成、密封和装配过程的确认和要求(ISO 11607-2:2006) Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) English version of DIN EN ISO 11607-2:2006-07
DIN EN ISO 13783-1998 塑料管体系.未增塑聚氯乙烯(PVC-U)端部承载双套管连接件.在经受弯曲和内压力时检测密封性和机械强度的试验 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997
DIN EN ISO 13844-2000 塑料管道系统.用于硬聚氯乙烯(PVC-U)管道的弹性密封圈式承口连接件.负压下密封试验方法 Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000
DIN EN ISO 13845-2000 塑料管道系统.用于硬聚氯乙烯(PVC-U)管道的弹性密封圈式承口连接件.内压下角度偏转密封试验方法 Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO 13845:2000
DIN EN ISO 13846-2001 塑料管道系统.热塑承压管用端部荷载轴承和无端部荷载轴承组件和连接件.测定水内压长期密封性的试验方法 Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000
DIN EN ISO 14593-2005 水质.水介质中有机化合物最大需氧生物降解能力的评价.密封容器中无机碳分析法(CO2顶空试验) Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of inorganic carbon in sealed vessels (CO<(Index)2> headspace test) (ISO 14593:1999); German version EN ISO 14593:2005
DIN EN ISO 21049-2005 泵.离心和旋转泵用轴密封系统 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004); English version EN ISO 21049:2004
DIN EN ISO 228-1 Bb.1-2003 非螺纹密封连接的管螺纹.第1部分:尺寸、公差和命名.尺寸限值 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN EN ISO 228-1-2003 非螺纹密封连接管螺纹.第1部分:尺寸、公差和命名 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN EN ISO 228-2-2003 非螺纹密封连接管螺纹.第2部分:极限量规检定 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
DIN EN ISO 483-2006 塑料.为保持恒定湿度使用水溶液进行调节和试验用的小型密封容器(ISO 483-2005).德文版本 EN ISO 483-2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005); German version EN ISO 483:2005
DIN EN ISO 6149-1-2007 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第1部分:锪孔沟槽中装 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006); German version EN ISO 6149-1:2007
DIN EN ISO 6149-2-2007 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第2部分:重型(S系列) Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version EN ISO 6149-2:2007
DIN EN ISO 6149-3-2007 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第3部分:轻型(L系列) Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version EN ISO 6149-3:2007
DIN EN ISO 7389-2004 房屋建筑.连接件.密封件的回弹性测定 Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002); German version EN ISO 7389:2003
DIN EN ISO 7390-2004 房屋建筑.连接件.密封件的耐流动性测定 Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002); German version EN ISO 7390:2003
DIN EN ISO 8339-2005 房屋建筑.密封件.拉伸性能(拉至断裂)的测定 Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005); German version EN ISO 8339:2005
DIN EN ISO 8340-2005 房屋建筑.密封件.保持延伸状态时拉伸性能的测定 Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005); German version EN ISO 8340:2005
DIN EN ISO 8434-4-2000 液压及通用金属管件连接.第4部分:接头焊有O形密封圈的24度锥体连接件 Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
DIN EN ISO 9046-2005 房屋建筑.连接产品.恒温下密封胶的粘附/粘合性能的测定 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004
DIN EN ISO 9047-2003 房屋建筑.连接件.变温下密封胶粘合性能的测定 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001); German version EN ISO 9047:2003
DIN EN ISO 9974-1-2000 一般用途和流体动力连接件.使用ISO 261螺纹的弹性密封或金属与金属密封的气门和双头螺栓端头.第1部分:螺纹 Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); German version EN ISO 9974-1:2000
DIN EN ISO 9974-2-2000 通用和液压传动用联接件.用ISO261弹性螺纹或金属与金属密封的气门和双头螺栓端头.第2部分:(E型)带弹性密封 Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000
DIN EN ISO 9974-3-2000 一般用途和流体动力连接件.使用ISO 261螺纹的弹性密封或金属与金属密封的气门和双头螺栓端头.第3部分:(B型) Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000
DIN IEC 60261-1991 加压波导管及其组件密封试验 Sealing test for pressurized waveguide; tubing and assemblies; identical with IEC 60261:1989; german version HD 138 S2:1990
DIN ISO 15705-2003 水质.化学需氧量指数测定.小型密封管法 Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed tube method (ISO 15705:2002)
DIN ISO 3939-1978 流体传动系统和元件.多层唇形密封组件.测量叠合高度的方法 Fluid Power Systems and Components; Multiple Lip Packing Sets, Methods for Measuring Stack Heights
DIN ISO 5597-1988 液压流体动力.液压缸.往复作用的活塞和活塞杆的密封腔.尺寸和公差 Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
DIN ISO 6547-1983 液压流体动力.装有轴承环的活塞密封壳体.尺寸和允公差 Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
DIN ISO 6550-1-1997 道路车辆.锥形密封座火花塞及汽缸盖孔.第1部分:M14×1.25火花塞 Road vehicles - Sheat-type glow-plugs with seating and their cylinder head housing - Part 1: M14 × 1,25 glow-plugs (ISO 6550-1:1994)
DIN ISO 6550-2-1997 道路车辆.带圆锥形密封座和汽缸盖孔的火花塞.第2部分:火花塞M12*1,25 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 × 1,25 glow-plugs (ISO 6550-2:1994)
DIN ISO 7320-1996 航空航天.流体系统用螺纹密封联轴器.尺寸 (ISO 7320:1992) Aerospace - Couplings, threaded and sealed, for fluid systems - Dimensions (ISO 7320:1992)
DIN ISO 7425-1-1990 液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.活塞密封沟槽 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
DIN ISO 7425-2-1990 液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.第2部分:活塞杆密封沟槽 Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989
DIN ISO 7632-1986 道路车辆.使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫件(最大工作温度120℃) Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.); identical with ISO 7632, edition 1985
DIN ISO 9090-1990 气焊及类似加工工艺设备的气体密封 Gas tightness of equipment for gas welding and allied processes; identical with ISO 9090:1989
DIN ISO 9222-1-1990 技术制图.动密封应用.第1部分:通用简化画法 Technical drawings; seals for dynamic application; part 1: general simplified representation; identical with ISO 9222-1:1989
DIN ISO 9222-2-1991 技术制图.动负荷用密封件.第2部分:详细简明的表示法; 等同采用 ISO 9222-2:1989 Technical drawings; seals for dynamic application; part 2: detailed simplified representation; identical with ISO 9222-2:1989
DIN V 18197-2005 用水密封的混凝土接缝的密封 Sealing of joints in concrete with water stops
DIN V 43693-2006 低压开关装置和控制装置.密封型平面设计活塞定位开关.结构安装和尺寸 Low-voltage switchgear and controlgear - Position switches with plunger, flat design, encapsulated - Functional and mounting design
DIN V 65900-6-1995 航空航天系列.钛合金管道联轴节、松动式法兰和密封件.总装建议 (AECMA 技术报告 TR 4053:1994) Aerospace series - Pipe couplings, loose flanges and seals, in titanium alloy Assembly recommendations (AECMA Technical Report TR 4053:1994)
DIN VDE 0472-604-1985 电缆、电线和绝缘导线试验.电缆护套密封性 Testing of cables, wires and flexible cords; tightness of cables sheaths
编号中文名称英文名称

返回