编号 | 中文名称 | 英文名称 |
XP D36-112-2000
| 家政学.使用汽缸或单个油箱里的丁烷或丙烷的家庭装置外部连接用(增强)挠性橡胶管
| (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using butane or propane from cylinders or individual tanks.)
|
NF R15-703-2-1996
| 道路车辆.罩型点火塞及汽缸盖上的座孔尺寸.第2部分:M12×1.25热线点火塞
| (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 2 : M12 X 1,25 glow-plugs.)
|
NF P26-414-1995
| 建筑用五金.“CHUBB“型或带有汽缸的简单150号配有安全锁的立式插锁
| (Building hardware. Simple 150 vertical mortice fitted safety locks, type “chubb“ or with cylinders.)
|
NF R15-703-1-1996
| 道路车辆.罩型点火塞及汽缸盖上的座孔尺寸.第1部分:M14×1.25热线点火塞
| (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 1 : M14 X 1,25 glow-plugs.)
|
NF R11-002-1978
| 内燃机.汽缸的数字标志
| (INTERNAL COMBUSTION ENGINES. CYLINDER NUMBERING.)
|
NF R12-622-1987
| 道路车辆.安装在底座上的,单汽缸三角皮带传动的空气压缩机.安装尺寸
| (ROAD VEHICLES. BASE-MOUNTED AIR COMPRESSORS,SINGLE CYLINDER V-BELT DRIVE. MOUNTING DIMENSIONS.)
|
NF R13-318-2002
| 道路车辆.带平座和16mm六角M14×1.25火花塞及其在汽缸盖上的座孔
| (Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings.)
|
NF E48-361-1992
| 液压传动.变量或定量汽缸发动机.控制规范
| (HYDRAULIC FLUID POWER. FIXED AND VARIABLE DISPLACEMENT MOTORS. SPECIFICATION WITH ODER.)
|
NF E48-354-1989
| 液压传动.容积泵和容积汽缸功率的测定
| (HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.)
|
ANSI B93.3-1984
| 汽缸孔和活塞杆直径.英制系列
| Cylinder Bore and Piston Rod Diameters - Inch Series
|
ANSI/ASTM D5001-2004
| 用汽缸上球式(BOCLE)润滑性评定仪测量航空涡轮机燃料润滑性的试验方法
| Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (Bocle) (05.03)
|
ANSI/ASAE S201.4-1982
| 农用拖拉机拖挂型农具、液压遥控汽缸的应用
| Agricultural Tractors and Trailing-Type Agricultural Implements, Application of Hydraulic Remote Control Cylinders to
|
ASTM C 1351M-1996
| 用固态垂直汽缸粘滞压缩在104巴(点)和108巴(点)的玻璃黏滞度测定的标准试验方法
| Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa-s and 108 Pa-s by Viscous Compression of a Solid Right Cylinder [Metric]
|
ASTM D 5001-2003
| 用汽缸上球式(BOCLE)润滑性评定仪测量航空涡轮机燃料润滑性的标准试验方法
| Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
|
BS 5672-1991
| 往复式内燃机汽缸头的汽缸和阀旋转方向标示和左、右单列发动机定义的规范
| Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
|
BS AU 264-1995
| 道路车辆.带有圆锥形底座的M18x1.5火花塞及其汽缸盖外壳
| Road vehicles - M18 X 1,5 spark-plugs with conical seating and their cylinder head housing
|
BS AU 262-1-1995
| 道路车辆.带有圆锥形底座的护套型热线点火塞及其汽缸盖外壳.M14x1.25热线点火塞
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs
|
BS AU 262-2-1995
| 道路车辆.带有圆锥形底座的护套型热线点火塞及其汽缸盖外壳.M12x1.25热线点火塞
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs
|
BS AU 263-1995
| 道路车辆.带有圆锥形底座的M14x1.25压实火花塞及其汽缸盖外壳
| Road vehicles - M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing
|
BS ISO 6020-3-1995
| 液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.内径从250mm到500mm的紧凑式系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm
|
BS HC 404-1976
| 铬-钼合金铸件铁环形坩埚(适用于离心铸造和砂型铸造密封环、活塞环和汽缸套筒)
| Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)
|
BS ISO 6981-1996
| 液压流体动力.汽缸.杆端孔.安装尺寸
| Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions
|
BS ISO 6432-1996
| 气动流体动力.单杆汽缸.10巴(1100kPa)系列.8-25mm的汽缸内径.安装尺寸
| Pneumatic fluid power - Single rod cylinders - 10 bar (1 000 kPa) series - Bores from 8 to 25 mm - Mounting dimensions
|
BS ISO 8131-1996
| 液压流体动力.16MPa(160 bar)紧凑式系列单杆汽缸.公差
| Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Tolerances
|
BS ISO 7181-1997
| 液压流体动力.汽缸.汽缸内径和连杆截面比
| Hydraulic fluid power - Cylinders - Bore and rod area ratios
|
BS ISO 7180-1997
| 气动流体动力.汽缸.汽缸内径和油口螺纹尺寸
| Pneumatic fluid power - Cylinders - Bore and port thread sizes
|
BS ISO 10762-1998
| 液压流体动力.汽缸安装尺寸.10Mpa(100bar)系列
| Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series
|
BS ISO 6020-1-1998
| 液压流体动力.16MPa(160bar)系列单杆汽缸安装尺寸.中型系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series
|
BS ISO 1919-1998
| 道路车辆.平底座M14×1.25火花塞及其汽缸盖外壳
| Road vehicles - M14 x 1,25 spark plugs with flat seating and their cylinder head housings
|
BS ISO 2704-1998
| 道路车辆.平底座M10×1火花塞及其汽缸盖外壳
| Road vehicles - M10 x 1 spark plugs with flat seating and their cylinder head housings
|
BS ISO 13726-1998
| 液压流体动力.内径为250mm-500mm的16MPa(160bar)紧凑式系列单杆汽缸.附件安装尺寸
| Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions
|
BS ISO 2344-1999
| 道路车辆.M14×1.25锥座火花塞及其汽缸盖外壳
| Road vehicles - M14 x 1,25 spark plugs with conical seating and their cylinder head housings
|
BS ISO 8137-1997
| 液压流体动力.250巴(25MPa)系列单杆汽缸.油口尺寸
| Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions
|
BS ISO 2705-2000
| 道路车辆.M12×1.25平座火花塞和汽缸盖安装座
| Road vehicles - M12 x 1,25 spark plugs with flat seating and their cylinder head housings
|
BS ISO 7425-2-2002
| 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞杆密封汽缸
| Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings
|
BS ISO 2346-2002
| 道路车辆.带平底座的19mm六角形的M14×1.25小型火花塞及其汽缸盖外罩
| Road vehicles - M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
|
BS ISO 6550-3-2002
| 道路车辆.带锥形座和汽缸盖罩的铠装加热塞.第3部分:M10加热塞
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs
|
BS ISO 7425-1-2002
| 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞密封汽缸
| Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings
|
BS ISO 6550-4-2005
| 道路车辆.带锥座封闭型电热塞及其汽缸盖安装孔尺寸.M8 x 1电热塞
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M8 x 1 glow-plugs
|
BS ISO 6022-2006
| 液压传动.25M Pa (250巴)系列单杆汽缸安装尺寸
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series
|
BS ISO 10766-2006
| 液压动力.汽缸.活塞及连杆用矩形截面轴承环沟槽尺寸
| Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods
|
BS ISO 6020-2-2006
| 液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.小型系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series
|
DIN 73021-1953
| 汽车发动机旋转方向、汽缸和点火电路的标志
| Designation of the rotational direction, the cylinders and the ignition circuits of motorcar engines
|
DIN 44770-1-1982
| 第1部分:气动焊接汽缸、无缓冲双作用、双活塞连接尺寸
| Pneumatic welding cylinder, double acting without cushion, double piston, connection dimensions
|
DIN ISO 4395-1985
| 液压传动系统和元件.汽缸.活塞杆螺纹尺寸和型式.等同采用ISO 4395-1985版本
| Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978
|
DIN ISO 6550-2-1997
| 道路车辆.带圆锥形密封座和汽缸盖孔的火花塞.第2部分:火花塞M12*1,25
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 × 1,25 glow-plugs (ISO 6550-2:1994)
|
DIN ISO 6550-1-1997
| 道路车辆.锥形密封座火花塞及汽缸盖孔.第1部分:M14×1.25火花塞
| Road vehicles - Sheat-type glow-plugs with seating and their cylinder head housing - Part 1: M14 × 1,25 glow-plugs (ISO 6550-1:1994)
|
DIN ISO 2345-1997
| 道路车辆.锥形底座M18×1.5火花塞及汽缸盖座孔
| Road vehicles - M18 × 1,5 spark-plugs with conical seating and their cylinder head housing (ISO 2345:1994)
|
DIN ISO 2347-1997
| 道路车辆.锥形底座M14×1.25小型火花塞及汽缸盖座孔
| Road vehicles - M14 × 1,25 compact spark-plugs with conical seating and their cylinder head housing (ISO 2347:1994)
|
DIN ISO 2704-2000
| 道路车辆.M10×1平座火花塞及其汽缸盖安装孔
| Road vehicles - M10 × 1 spark-plugs with flat seating and their cylinder head housings (ISO 2704:1998)
|
ISO 7285-1995
| 机械化多头点焊用汽缸
| Pneumatic cylinders for mechanized multiple spot welding
|
ISO 13340-2001
| 可搬运输汽缸 不可再充气汽缸阀 规范和原机试验
| Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing
|
ISO 6550-3-2002
| 道路车辆.带锥形座的罩型热线点火塞及其汽缸盖.第3部分:M10热线点火塞
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs
|
ISO 6550-4-2005
| 道路车辆.带锥座的封闭型电热塞及其汽缸盖.第4部分:M8 x 1电热塞
| Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs
|
JIS G3473-1988
| 汽缸套筒用碳素钢钢管
| Carbon steel tubes for cylinder barrels
|
JIS D3103-1989
| 汽车发动机用汽缸衬套
| Cylinder liners for automotive engines
|
JIS B8368-1-2002
| 气压缸的安装尺寸.第1部分:单杆.带固定安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 2 Mounting dimensions for pneumatic cylinders -- Part 1:
| Single rod -- 1 MPa series, square cover and tie rod tightend type with fixed mounting devices (Bores from 32 mm to 250 mm)
|
JIS B8368-2-2002
| 气压缸的安装尺寸.第2部分:单杆.带可分离安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至
| Mounting dimensions for pneumatic cylinders -- Part 2: Single rod -- 1 MPa series, square cover and tie rod tightend type with detachable mounting devices (Bores from 32 mm to 320 mm)
|
JIS B8368-3-2002
| 气压缸的安装尺寸.第3部分:单杆.带固定和可分离安装装置型的1 MPa系列、小缸径液压气缸( 汽缸内径8 mm 至 2
| Mounting dimensions for pneumatic cylinders -- Part 3: Single rod -- 1 MPa series, small bore with fixed and detachable mounting device type (Bores from 8 mm to 25 mm)
|
JIS B8368-4-2002
| 气压缸的安装尺寸.第4部分:单杆.1 MPa系列、节省空间型液压气缸(汽缸内径20 mm 至 100 mm)
| Mounting dimensions for pneumatic cylinders -- Part 4: Single rod -- 1 MPa series, space saving cylinders (Bores from 20 mm to 100 mm)
|
JIS B8367-5-2002
| 液压气缸的安装尺寸.第5部分:单杆.10 MPa系列、方盖、系杆密封型液压气缸(汽缸内径40 mm 至 200 mm)
| Mounting dimensions for hydraulic cylinders -- Part 5: Single rod -- 10 MPa series, square cover and tie rod tightend type (Bores from 40 mm to 200 mm)
|
JIS B8367-6-2002
| 液压气缸的安装尺寸.第6部分:单杆.10 MPa系列、空间窄小型液压气缸(汽缸内径32 mm 至 100 mm)
| Mounting dimensions for hydraulic cylinders -- Part 6: Single rod -- 10 MPa series space saving type (Bores from 32 mm to 100 mm)
|
JB/T 3042-1999
| 组合机床 夹紧油缸 系列参数
| ()
|
JB/T 9834-1999
| 农用双作用油缸 技术条件
| ()
|
NF E48-019-2003
| 流体动力系统和元件.油缸内径和活塞杆直径.米制系列
| (Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series.)
|
EN 13953-2003
| 液化石油气(LPG)用可运输、可再装油缸卸压阀
| Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
|
JIS D2611-1995
| 汽车部件.使用非石油基液压制动油的液压盘式制动器油缸的弹性防尘罩
| Automotive parts -- Elastomeric boots of hydraulic disc brakes cylinders using a non-petroleum base hydraulic brake fluid
|
JIS D2612-2005
| 汽车部件.使用非石油基液压制动液的液压制动主油缸用储油箱密封件
| Automotive parts -- Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid
|
JIS D2610-2005
| 汽车部件.使用非石油基液压制动液体的液压制动主油缸储油箱用膜片衬垫
| Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
|
编号 | 中文名称 | 英文名称 |