5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




工业陶瓷标准(Engineering ceramics standards)翻译目录查询

返回

编号中文名称英文名称
ANSI/ADA 38-2000 金属陶瓷体系 Metal-Ceramic Systems
ASTM C 1300-1995 用干涉法测定玻璃原料和卫生陶瓷材料线性热膨胀的标准试验方法 Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
ASTM C 1525-2004 用水淬火法测定高级陶瓷制品耐热冲击性的标准试验方法 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
ASTM C 1605-2004 使用波长色散X射线荧光光谱法进行白色陶瓷材料化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM C 329-1988 焙烧卫生陶瓷材料比重的标准试验方法 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM C 346-1987 陶瓷材料制45度镜面光泽度的试验方法 Test Method for 45-Deg Specular Gloss of Ceramic Materials
ASTM C 370-1988 焙烧卫生陶瓷制品受潮膨胀的标准试验方法 Standard Test Method for Moisture Expansion of Fired Whiteware Products
ASTM C 372-1994 用膨胀仪测定搪瓷及釉面焙烧制品与焙烧卫生陶瓷制品的线性热膨胀的标准试验方法 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
ASTM C 373-1988 焙烧卫生陶瓷制品的吸水率、松密度、表观多孔性与表观比重的标准试验方法 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
ASTM C 408-1988 卫生陶瓷制品传热性的试验方法 Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM C 539-1984 用干扰法测定搪瓷、釉瓷和白色陶瓷材料线性热膨胀的试验方法 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
ASTM C 623-1992 用共振现象对玻璃和玻璃陶瓷材料的杨氏模量、剪切模量及泊松比的标准试验方法 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
ASTM C 674-1988 卫生陶瓷材料的挠曲特性的试验方法 Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM C 773-1988 焙烧的白色陶瓷材料抗压(压碎)强度的试验方法 Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM D 116-1986 电气设备用上釉陶瓷材料的试验 Testing Vitrified Ceramic Materials for Electrical Applications
ASTM F 19-1964 镀金属陶瓷密封件抗拉及真空试验方法 Test Method for Tension and Vacuum Testing Metalized Ceramic Seals
BS 1902-6-1986 耐火材料的试验方法.第6部分:陶瓷纤维制品 Methods of testing refractory materials - Ceramic fibre products
BS 4495-1969 陶瓷和金属陶瓷度层的熔喷法推荐标准 Recommendations for the flame spraying of ceramic and cermet coatings
BS 6466-1984 陶瓷纤维炉衬的设计和安装实用规程 Code of practice for design and installation of ceramic fibre furnace linings
BS 6748-1986 陶瓷制品、玻璃器皿、玻璃陶瓷制品和搪瓷制品金属析出极限规范 Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
BS 7134-0-1990 工程陶瓷试验.第0部分:取样导言和指南 Testing of engineering ceramics - Introduction and guide to sampling
BS 7134-3.5-1990 工程陶瓷的试验.热机性能.热塑性变形的测定方法(下垂法) Testing of engineering ceramics - Thermo-mechanical properties - Methods for determination of pyroplastic deformation (sagging)
BS 7134-4.1-1990 工程陶瓷试验.热物理性能.热膨胀测定方法 Testing of engineering ceramics - Thermo-physical properties - Method for determination of thermal expansion
BS 7225-3.1-1990 耐火材料分类.第3部分:陶瓷纤维制品.第1节:覆盖层、底板、毡垫和纸 Classification of refractories - Ceramic fibre products - Blankets , mats, felts and paper
BS 7253-2-1997 外科植入物用非金属材料.高纯度氧化铝陶瓷材料规范 Non-metallic materials for surgical implants - Specification for ceramic materials based on high purity alumina
BS 7253-6-1997 外科植入非金属材料.基于氧化钇稳定处理的四方形氧化锆陶瓷材料规范 Non-metallic materials for surgical implants - Specification for ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
BS DD CEN/TS 1071-10-2004 高级工业陶瓷.陶瓷涂层的试验方法.横切法测定涂层厚度 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by cross section
BS DD CEN/TS 1071-7-2003 高级工业陶瓷.陶瓷涂层的试验方法.用仪器化刻痕试验测定硬度及杨式模量 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of hardness and Young's modulus by instrumented indentation testing
BS DD CEN/TS 1071-8-2005 高级工业陶瓷.陶瓷涂层的试验方法.粘着性评定用洛氏针入试验 Advanced technical ceramics - Methods of text for ceramic coatings - Rockwell indentation test for evaluation of adhesion
BS DD CEN/TS 1159-4-2004 高级工业陶瓷.陶瓷复合材料.热物理性能.热传导性的测定 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal conductivity
BS DD CEN/TS 14425-1-2003 高级工业陶瓷.整体陶瓷断裂韧性测定的试验方法.试验方法选择指南 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
BS DD CEN/TS 14425-3-2004 高级工业陶瓷.块体陶瓷断裂韧性测定的试验方法.人字切口横梁法 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
BS DD CEN/TS 14425-5-2005 高级工业陶瓷.单片陶瓷断裂韧性测定的试验方法.单边V形切口横梁法 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Single-edge vee-notch beam (SEVNB) method
BS DD CEN/TS 843-6-2004 高级工业陶瓷.单片陶瓷.室温下的机械性能.断裂面显微镜检验 Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Guidance for fractographic investigation
BS DD ENV 1006-2003 高级工业陶瓷.整体陶瓷.特性评定用试样的选择指南 Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
BS DD ENV 1071-5-1995 高级工业陶瓷.陶瓷涂层的试验方法.孔隙率测定 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of porosity
BS DD ENV 1071-6-2002 高级工业陶瓷.陶瓷涂层的试验方法.用微磨损损耗试验测定耐磨性 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test
BS DD ENV 1094-7-1994 隔热产品.陶瓷纤维产品的试验方法 Insulating refractory products - Methods of test for ceramic fibre products
BS DD ENV 14232-2003 高级工业陶瓷.术语、定义和缩写 Advanced technical ceramics - Terms, definitions and abbreviations
BS DD ENV 14273-2002 高级工业陶瓷.陶瓷粉.锆晶相的测定 Advanced technical ceramics - Ceramic powders - Determination of crystalline phases in zirconia
BS EN 1007-3-2003 高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.长纤维直径和横截面积的测定 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of filament diameter and cross-section area
BS EN 1007-4-2005 高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.环境温度下长纤维的抗拉性能测定 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature
BS EN 1007-5-2003 高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.室温下复丝束中长丝断开时的拉伸强度和拉伸应变分布的测定 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
BS EN 1071-1-2003 高级工业陶瓷.陶瓷覆层的试验方法.用触针式轮廓测定仪测定陶瓷覆层厚度 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by contact probe filometer
BS EN 1071-2-2002 高级工业陶瓷.陶瓷覆层的试验方法.用环形研磨法测定陶瓷覆层厚度 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by the crater grinding method
BS EN 1071-4-2006 高级工业陶瓷.陶瓷覆层的试验方法.使用电探针微量分析(EPMA)测量化学成分 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4:Determination of chemical composition by electron probe microanalysis (EPMA)
BS EN 1094-1-1997 隔热耐火产品.陶瓷纤维产品术语 Insulating refractory products - Terminology for ceramic fibre products
BS EN 1094-3-2003 绝缘耐火产品.陶瓷纤维绝缘制品的分类 Insulating refractory products - Classification of insulating products made from ceramic fibres
BS EN 1159-1-2004 高级工业陶瓷.陶瓷复合材料.热机械性能.热膨胀性的测定 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal expansion
BS EN 1159-2-2003 高级工业陶瓷.陶瓷复合材料.热机械性能.热扩散系数的测定 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal diffusivity
BS EN 1159-3-2003 高级工业陶瓷.陶瓷复合材料.热-机械性能.比热的测定 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of specific heat capacity
BS EN 12291-2004 高级工业陶瓷.大气压力下高温空气中陶瓷复合材料的机械性能.压缩特性的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties
BS EN 12789-2003 高级工业陶瓷.在大气压下高温时陶瓷复合材料的机械特性.挠曲强度的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
BS EN 1389-2004 高级工业陶瓷.陶瓷复合材料.物理性能.密度和表观孔隙率的测定 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
BS EN 1892-2005 高级工业陶瓷.陶瓷复合材料在惰性气体中高温下的机械性能.抗拉性能测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
BS EN 1893-2005 高级工业陶瓷.大气压力下空气中高温情况下陶瓷成分的机械特性.拉伸特性的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
BS EN 1894-2005 高级工业陶瓷.惰性气体环境中高温情况下陶瓷成分的机械特性.通过有凹槽试样的压力荷载测定剪切强度 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
BS EN 50324-1-2002 陶瓷材料和元件的压电性能.术语和定义 Piezoelectric properties of ceramic materials and components - Terms and definitions
BS EN 50324-2-2002 陶瓷材料和元件的压电性能.测量方法.低功率 Piezoelectric properties of ceramic materials and components - Methods of measurement - Low power
BS EN 50324-3-2002 陶瓷材料和元件的压电性能.测量方法.高功率 Piezoelectric properties of ceramic materials and components - Methods of measurement - High power
BS EN 623-3-2001 高级工程陶瓷.单片陶瓷.一般和纹理特性.粒度和粒度分布的测定(线性截取法表征) Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of grain size and size distribution (characterized by the linear intercept method)
BS EN 623-4-2004 高级工业陶瓷.块体陶瓷.一般和纹理特性.表面粗糙度的测定 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of surface roughness
BS EN 658-2-2003 高级工业陶瓷.室温下陶瓷复合材料的机械性能.压缩性能的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of compression properties
BS EN 658-4-2003 高级工业陶瓷.室温下陶瓷复合材料的机械性能.通过有凹槽试样的抗压荷载测定层间的剪切强度 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by compression loading of notched test specimens
BS EN 658-5-2003 高级工业陶瓷.室温下陶瓷复合材料的机械性能.利用短跨度弯曲试验(三点)测定层间抗剪强度 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 725-9-2006 高级工业陶瓷.陶瓷粉末的试验方法.未夯实的体积密度的测定 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density
BS EN 820-1-2003 高级工业陶瓷.整体陶瓷的试验方法.热机械特性.高温下挠曲强度的测定 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Determination of flexural strength at elevated temperatures
BS EN 820-2-2003 高级工业陶瓷.整体陶瓷的试验方法.热-机械特性.自重变形的测定 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Determination of self-loaded deformation
BS EN 820-3-2004 高级工业陶瓷.单片陶瓷.热机械性能.水淬火法测定耐热冲击 Advanced technical ceramics - Monolithic ceramics - Thermomechanical properties - Determination of resistance to thermal shock by water quenching
BS EN 821-3-2005 高级工业陶瓷.整体陶瓷.热物理特性.比热容的测定 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of specific heat capacity
BS ISO 10635-2000 耐火制品.陶瓷纤维制品的试验方法 Refractory products - Methods of test for ceramic fibre products
BS ISO 15490-2001 细陶瓷(高级陶瓷、高级工业陶瓷).室温下单片陶瓷抗拉强度的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature
BS ISO 20508-2004 细陶瓷(高级陶瓷、高级工业陶瓷).带有透明衬底的陶瓷薄膜的透光度的测定 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of light transmittance of ceramic films with transparent substrate
DD ENV 1094-3-1998 绝缘耐火产品.陶瓷纤维产品分类 Insulating refractory products. Classification of ceramic fibre products
DD ENV 1094-7-1994 绝缘耐火制品.第7部分:陶瓷纤维制品的试验方法 Insulating refractory products. Methods of test for ceramic fibre products
DIN 40680-1-1983 电工陶瓷件.容许公差 Ceramic components for electrical purposes; admissible tolerances
DIN 40680-2-1983 电工陶瓷件.形状公差 Ceramic components for electrical purposes; form tolerances
DIN 40686 Bb.2-1983 电工致密陶瓷件的表面.表面粗糙度的测定 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness
DIN 40686-1-1983 电工细陶瓷件的表面.定义 Surfaces of dense ceramic components for electrical engineering; definitions
DIN 40686-4-1983 电工细陶瓷件的表面.可软钎焊金属镀层的检验 Surfaces of dense ceramic components for electrical engineering; testing of soft-solderable metal coatings
DIN 40686-5-1983 电工细陶瓷件的表面.可硬钎焊金属镀层的检验 Surfaces of dense ceramic components for electrical engineering; testing of hard-solderable metal coatings
DIN 40686-6-1983 电工细陶瓷件的表面.高压、低压绝缘子 Surfaces of dense ceramic components for electrical engineering; high-voltage and low-voltage insulators
DIN 40686-7-1983 电工细陶瓷件的表面.绝缘件 Surfaces of dense ceramic components for electrical engineering; insulating parts
DIN 44926-1-1991 电热元件用陶瓷件.第1部分:多孔管尺寸 Ceramic parts for electric heating elements; multiple hole tubes; dimensions
DIN 44926-2-1991 电热元件用陶瓷件.第2部分:开口式多孔管尺寸 Ceramic parts for electric heating elements; open multiple hole tubes; dimensions
DIN 44926-3-1991 电热元件用陶瓷件.第3部分:带连接件的螺旋盘尺寸 Ceramic parts for electric heating elements; helical discs with connecting parts; dimensions
DIN 48108-1-1983 电工陶瓷件.绝缘子安装部位.开槽 Ceramic components for electrical purposes; mounting places for insulators; grooving
DIN 48108-2-1983 电工陶瓷件.绝缘子的安装部位.砂磨表面 Ceramic components for electrical purposes; mounting places for insulators; sanded surfaces
DIN 48108-3-1983 电工陶瓷件.绝缘子安装部位.皱纹面 Ceramic components for electrical purposes; mounting places for insulators; undulatory profile
DIN 51045-2-1976 采用热效应法对固体长度变化的测定.第2部分:焙烧的细陶瓷材料的检验 Determination of the change of length of solids by thermal effect; testing of fired fine ceramic materials
DIN 51045-3-1976 采用热效应法对固体长度变化的测定.第3部分:未焙烧的细陶瓷材料的检验 Determination of the change of length of solids by thermal effect; testing of non-fired fine ceramic materials
DIN 51045-4-1976 采用热效应法对固体长度变化的测定.第4部分:焙烧过的普通陶瓷材料的检验 Determination of the change of length of solids by thermal effect; testing of fired ordinary ceramic materials
DIN 51045-5-1976 采用热效应法对固体长度变化的测定.第5部分:未焙烧的普通陶瓷材料的检验 Determination of the change of length of solids by thermal effect; testing of non-fired ordinary ceramic materials
DIN 51068-1-1976 陶瓷材料的试验.测定耐热冲击抗性.耐火砖水淬法 Testing of ceramic materials; Determination of Resistance to Thermal Shock; Water quenching method for refractory bricks
DIN 51074-1-1971 陶瓷材料的检验.第1部分:含氧化铬陶瓷材料的化学分析.一般说明和试验报告 Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, general instructions and test report
DIN 51074-2-1971 陶瓷材料的检验.用溶解法对含氧化铬的陶瓷材料的化学分析 Testing of ceramic material; chemical analysis of ceramic materials containing chromium oxide, methods of dissolution
DIN 51074-3-1971 陶瓷材料的检验. 用铬氧化物测定法对含氧化铬的陶瓷采料的化学分析 Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, determination of chromic oxide
DIN 51074-4-1971 陶瓷材料的检验.第4部分:用氧化钙测定法对含氧化铬的陶瓷材料进行化学分析 Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, determination of calcium oxide
DIN 51075-1-1982 陶瓷材料的检验.碳化硅的化学分析.试样的制备和碳化硅含量的计算 Testing of ceramic materials; chemical analysis of silicon carbide; sample preparation and calculation of silicon carbide content
DIN 51075-2-1984 陶瓷材料的检验.碳化硅的化学分析.游离碳含量的直接测定 Testing of ceramic materials; chemical analysis of silicon carbide; direct determination of the free carbon content
DIN 51075-3-1982 陶瓷材料的检验.碳化硅的化学分析.总含碳量的测定 Testing of ceramic materials; chemical analysis of silicon carbide; determination of the total carbon content
DIN 51075-4-1982 陶瓷材料的检验.碳化硅的化学分析.游离硅含量的测定 Testing of ceramic materials; chemical analysis of silicon carbide; determination of the free silicon content
DIN 51075-5-1982 陶瓷材料的检验.碳化硅的化学分析.游离碳含量的直接测定 Testing of ceramic materials; chemical analysis of silicon carbide; indirect determination of the free carbon content
DIN 51076-1-1991 陶瓷材料的检验.作为原材料的主要成份或次要成份的碳化硅的化学分析.用氧化成份和粘合料测定原料中碳化硅含 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
DIN 51079-1-2004 陶瓷材料的检验.作为原材料和材料成分的碳化硅的化学分析.第1部分:用碳酸钠和硼酸分解 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid
DIN 51079-2-2004 陶瓷材料的检验.作为原材料和材料成分的碳化硅的化学分析.第2部分:用酸进行的压力分解 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid
DIN 51082-2003 陶瓷原材料和陶瓷材料测试.不溶性粉末悬浮液pH值测定 Testing of ceramic raw materials and ceramic materials - Determination of pH value of suspensions of non-soluble powders
DIN 51083-3-2004 陶瓷材料的检验.硅酸铝的化学分析.第3部分:分解法 Testing of ceramic materials - Chemical analysis of alumosilicates - Part 3: Decomposition methods
DIN 51083-5-2003 陶瓷材料的检验.硅酸铝的化学分析.第5部分:二氧化钛的测定 Testing of ceramic materials - Chemical analysis of alumosilicates - Part 5: Determination of titanium oxide
DIN 51083-8-2003 陶瓷材料的试验.铝硅酸盐的化学分析.第8部分:用原子吸收光谱法测定氧化镁 Testing of ceramic materials - Chemical analysis of alumosilicates - Part 8: Determination of magnesium oxide (MgO) by atomic absorption spectrometry
DIN 51083-9-1990 陶瓷材料的检验.硅酸铝的化学分析.五氧化二磷含量的光度测定 Testing of ceramic materials; chemical analysis of alumosilicates; photometric determination of the phosphorus-V-oxid content
DIN 51102-1-1976 陶瓷材料的检验.用下水道瓦管材料结块试验方法测定耐酸性 Testing of ceramic materials; determination of the acid resistance, method with lumpy test material for clay for severage
DIN 51110-3-1993 高技术陶瓷材料检验.4点弯曲试验.静态评估.Weibull(威伯尔)参数的测定 Testing of advanced technical ceramics; 4-point-bending test; statistical evaluation; determination of the Weibull-parameters
DIN CEN/TS 1071-10-2004 高级工业陶瓷.陶瓷涂层的试验方法.第10部分:由横切法测定涂层厚度 Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning; German version CEN/TS 1071-10:2004
DIN CEN/TS 1071-11-2006 高级工业陶瓷.陶瓷涂层的试验方法.第11部分:用Stoney公式测定内压 Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula; German version CEN/TS 1071-11:2005
DIN CEN/TS 1071-7-2003 高级工业陶瓷.陶瓷涂层的试验方法.第7部分:通过装有测量仪器的压痕试验测定硬度和杨氏模量 Advanced technical ceramics - Methods of test for ceramic coatings - Part 7: Determination of hardness and Young's modulus by instrumented indentation testing; German version CEN/TS 1071-7:2003
DIN CEN/TS 1071-8-2004 高级工业陶瓷.陶瓷涂层的试验方法.第8部分:粘性评价的洛氏亚痕试验 Advanced technical ceramics - Methods of test for ceramic coatings - Part 8: Rockwell indentation test for evaluation of adhesion; German version CEN/TS 1071-8:2004
DIN CEN/TS 1071-9-2004 高级工业陶瓷.陶瓷涂层的试验方法.第9部分:断裂应变的测定 Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain; German version CEN/TS 1071-9:2004
DIN CEN/TS 1159-4-2004 高级工业陶瓷.陶瓷复合物.热物理性能.第4部分:热导性的测定 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004
DIN CEN/TS 14425-1-2003 高级工业陶瓷.单片陶瓷断裂韧性测定的试验方法.第1部分:试验方法的选择指南 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN CEN/TS 14425-3-2003 高级工业陶瓷.单片陶瓷断裂韧性测定的试验方法.第3部分:锯齿形切口试杆法 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron-notched beam (CNB) method; German version CEN/TS 14425-3:2003
DIN CEN/TS 14425-5-2004 高级工业陶瓷.单片陶瓷断裂韧性测定的试验方法.第5部分:单边V形切口束法 Advanced technical ceramics - Test methods for determination of fracture toughness of monolitic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method; German version CEN/TS 14425-5:2004
DIN CEN/TS 15365-2006 高级工业陶瓷.无化学反应环境的高温条件下陶瓷纤维的机械性能.通过冷端法测定儒变特性 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method; German version CEN/TS 15365:2006
DIN CEN/TS 15365-2006 高级工业陶瓷.无化学反应环境的高温条件下陶瓷纤维的机械性能.通过冷端法测定儒变特性 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method; German version CEN/TS 15365:2006
DIN CEN/TS 820-5-2004 高级工业陶瓷.块体陶瓷试验方法.热机性能.第5部分:高温下弹性模量的测定 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 5: Determination of elastic moduli at elevated temperatures; German version CEN/TS 820-5:2004
DIN CEN/TS 843-6-2004 高级工业陶瓷.块体陶瓷.室温下机械性能.第6部分:断裂面显微镜图像观察指南 Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 6: Guidance for fractographic investigation; German version CEN/TS 843-6:2004
DIN EN 1007-4-2004 高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.第4部分:环境温度下长纤维的抗拉性能测定 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature; German version EN 1007-4:2004
DIN EN 1007-5-2003 高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.第5部分:室温下复丝束中长丝断开时的拉伸强度和拉伸应变分 Advanced technical ceramics - Ceramic composites; Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature; German version EN 1007-5:2003
DIN EN 1071-1-2003 高级工业陶瓷.陶瓷覆层的试验方法.第1部分:用接触式探针轮廓测定仪测定覆层厚度 Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer; German version EN 1071-1:2003
DIN EN 1071-2-2003 高级工程陶瓷.陶瓷覆层试验方法.第2部分:用圆坑研磨法测定覆层厚度 Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method; German version EN 1071-2:2002
DIN EN 1071-3-2005 高级工业陶瓷.陶瓷覆层的试验方法.第3部分:用划痕试验测定粘附性和其他机械失效模式 Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test; English version EN 1071-3:2005
DIN EN 1071-4-2006 高级工业陶瓷.陶瓷涂层的试验方法.第4部分:使用电探针微量分析(EPMA)测量化学成分 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA); German version EN 1071-4:2006
DIN EN 1094-1-1997 绝缘耐火产品.第1部分:陶瓷纤维制品术语 Insulating refractory products - Part 1: Terminology for ceramic fibre products; German version EN 1094-1:1997
DIN EN 1094-3-2003 隔热耐火产品.第3部分:陶瓷纤维隔热制品的分类 Insulating refractory products - Part 3: Classification of insulating products made from ceramic fibres; German version EN 1094-3:2003
DIN EN 1159-1-2003 高级工业陶瓷.陶瓷复合材料.热物理性能.第1部分:热膨胀的测定 Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 1: Determination of thermal expansion; German version EN 1159-1:2003
DIN EN 1159-2-2003 高级工业陶瓷.陶瓷复合材料.热物理特性.第2部分:热扩散系数的测定 Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 2: Determination of thermal diffusivity; German version EN 1159-2:2003
DIN EN 1159-3-2003 高级工业陶瓷.陶瓷复合材料的热物理性能.第3部分:比热的测定 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity; German version EN 1159-3:2003
DIN EN 1217-1998 接触食品的材料和物品.陶瓷制品吸水性试验方法 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN EN 12289-2005 高级工业陶瓷.环境温度下陶瓷组分的机械特性.面内剪切性能的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties; German version EN 12289:2005
DIN EN 12290-2005 高级工业陶瓷.惰性气体环境内高温下陶瓷组分的机械特性.压缩特性的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties; German version EN 12290:2005
DIN EN 12291-2003 高级工业陶瓷.陶瓷复合材料在高温、大气压和空气中的机械性能.压缩性能的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties; German version EN 12291:2003
DIN EN 12788-2005 高级工业陶瓷.惰性气体环境内高温下陶瓷组分的机械特性.抗弯强度的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength; German version EN 12788:2005
DIN EN 12789-2003 高级工业陶瓷.大气压力下陶瓷复合物高温机械特性.挠曲强度测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength; German version EN 12789:2002
DIN EN 13258-2003 与食品接触的材料和用品.陶瓷制品耐碎裂性的试验方法 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 1388-1-1995 与食品接触的材料和物品.硅化表面.第1部分:测定从陶瓷制品中释放的铅和镉; 德文版本 EN 1388-1:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware; German version EN 1388-1:1995
DIN EN 1388-2-1995 与食品接触的材料和物品.硅化表面.第2部分:除陶瓷制品外测定从硅化表面释放的铅和镉; 德文版本 EN 1388-2:1 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
DIN EN 1389-2004 高级工业陶瓷.陶瓷复合物.物理性能.密度和表观孔隙率的测定 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity; German version EN 1389:2003
DIN EN 1892-2005 高级工业陶瓷.惰性气体高温环境下陶瓷组分的机械特性.抗拉特性测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties; German version EN 1892:2005
DIN EN 1893-2005 高级工业陶瓷.大气压力高温环境中陶瓷组分的机械特性.抗拉特性测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties; German version EN 1893:2005
DIN EN 1894-2005 高级工业陶瓷.惰性气体高温环境中陶瓷组分的机械特性.有凹槽试样在压力荷载下剪切强度的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005
DIN EN 50324-1-2002 陶瓷材料和部件的压电性能.第1部分:术语和定义; 德文和英文版本 EN 3475-804:2002 Piezoelectric properties of ceramic materials and components - Part 1: Terms and definitions; German version EN 50324-1:2002
DIN EN 50324-2-2002 陶瓷材料和部件的压电性能.第2部分:低功率测量方法; 德文版本 EN 50324-2:2002 Piezoelectric properties of ceramic materials and components - Part 2: Methods of measurement; Low power; German version EN 50324-2:2002
DIN EN 50324-3-2002 陶瓷材料和部件的压电性能.第3部分:高功率测量方法; 德文版本 EN 50324-3:2002 Piezoelectric properties of ceramic materials and components - Part 3: Methods of measurement; High power; German version EN 50324-3:2002
DIN EN 60168-2001 额定电压超过1kV的系统用陶瓷材料或玻璃制室内和室外架空支承绝缘子试验 Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV (IEC 60168:1994 + A1:1997 + A2:2000); German version EN 60168:1994 + A1:1997 + A2:2000
DIN EN 61211-2005 标称电压1000V以上的架空线用陶瓷材料或玻璃绝缘子.空气中脉冲击穿试验 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 V - Impulse puncture testing in air (IEC 61211:2004); German version EN 61211:2005
DIN EN 623-1-2006 高级工业陶瓷.块体陶瓷.一般和结构特性.第1部分:用染色穿透法测定缺陷 Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 1: Determination of the presence of defects by dye penetration; German version EN 623-1:2006
DIN EN 623-3-2003 高级工业陶瓷.单片陶瓷.总则和结构特性.第3部分:粒度和粒度分布测定(用线性截断法表征) Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method); German version EN 623-3:2001
DIN EN 623-4-2005 高级工业陶瓷.块体陶瓷.一般和结构特性.第4部分:表面粗糙度的测定 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
DIN EN 658-1-1999 高级工程陶瓷.室温下陶瓷复合材料的机械性能.第1部分:抗拉性能测定 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties; German version EN 658-1:1998
DIN EN 658-2-2003 高级工业陶瓷.陶瓷复合材料室温机械性能.第2部分:抗压强度测定 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties; German version EN 658-2:2002
DIN EN 658-4-2003 高级工业陶瓷.陶瓷复合材料室温机械性能.第4部分:通过切口试样压缩负荷测定内层剪切强度 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens; German version EN 658-4:2003
DIN EN 658-5-2003 高级工业陶瓷.陶瓷复合材料室温机械性能.第5部分:通过瞬间弯曲试验测定内层剪切强度 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN EN 725-8-2006 高级工业陶瓷.陶瓷粉末试验方法.第8部分:振实体密度的测定 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density; German version EN 725-8:2006
DIN EN 725-9-2006 高级工业陶瓷.陶瓷粉末试验方法.第9部分:非振实体密度测定 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density; German version EN 725-9:2006
DIN EN 820-1-2003 高级工业陶瓷.单片陶瓷试验方法.热机械特性.第1部分:高温挠曲强度测定 Advanced technical ceramics - Methods of testing monolithic ceramics; Thermo-mechanical properties - Part 1: Determination of flexural strength at elevated temperatures; German version EN 820-1:2002
DIN EN 820-2-2003 高级工业陶瓷.整体陶瓷的试验方法.热机械特性.第1部分:自重变形的测定 Advanced technical ceramics - Methods of test for monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation; German version EN 820-2:2003
DIN EN 820-3-2004 高级工业陶瓷.块体陶瓷的试验方法.热机械特性.第3部分:水淬火法测定耐热冲击性 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching; German version EN 820-3:2004
DIN EN 821-3-2005 高级工业陶瓷.整体陶磁.热物理性能.第3部分:比热的测定 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity; German version EN 821-3:2005
DIN EN 843-3-2005 高级工业陶瓷.室温下整体陶瓷的机械特征.第3部分:恒定应力速度挠曲强度试验中亚临界断裂增长参数的测定 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests; German version EN 843-3:2005
DIN EN 843-4-2005 高级工业陶瓷.室温下整体陶瓷的机械特征.第4部分:维氏、努氏和洛氏表面硬度 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness; German version EN 843-4:2005
DIN EN ISO 15732-2005 细陶瓷(高级陶瓷、高级工业陶瓷).室温下用单边预裂束法(SEPB)测定块体陶瓷破裂韧性的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003); German version EN ISO 15732:2005
DIN EN ISO 18753-2006 精密陶瓷(高级陶瓷、高级工业陶瓷).比重计测定陶瓷粉末的绝对密度 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004); German version EN ISO 18753:2005
DIN EN ISO 18756-2005 细陶瓷(高级陶瓷、高级工业陶瓷).用弯曲时的表面裂纹(SCF)法测定室温下块体陶瓷的断裂韧性 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003); German version EN ISO 18756:2005
DIN EN ISO 18757-2006 精密陶瓷(高级陶瓷、高级工业陶瓷).BET法利用气体吸附来测定陶瓷粉末的比表面积 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); German version EN ISO 18757:2005
DIN ISO 6474-2001 外科植入物.基于高纯度铝的陶瓷材料 Implants for surgery - Ceramic materials based on high purity alumina (ISO 6474:1994)
DIN V ENV 1006-2003 高级工业陶瓷.整体陶瓷.性能评价试样选择指南 Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties; German version ENV 1006:2003
DIN V ENV 1094-7-1994 绝缘耐火制品.第7部分:陶瓷纤维制品的试验方法; 德文版本 ENV 1094-7:1993 Insulating refractory products; part 7: methods of test for ceramic fibre products; German version ENV 1094-7:1993
DIN V ENV 12212-1996 高级工程陶瓷.统一分级方法 Advanced technical ceramics - Unified method for classification; German version ENV 12212:1995
DIN V ENV 14232-2003 高级工业陶瓷.术语、定义和首字母组合词 Advanced technical ceramics - Terms, definitions and abbreviations; Trilingual version ENV 14232:2003
DIN V ENV 658-6-1993 高级工业陶瓷.室温下陶瓷复合材料的机械性能.第6部分:双冲孔剪切试验测定剪切强度 Advanced technical ceramics; mechanical properties of ceramic composites at room temperture; part 6: determination of shear strength by double-punch shearing; german version ENV 658-6:1993
DIN V ENV 820-4-2001 高级工业陶瓷.整块陶瓷试验方法.热-机械性能.第4部分:高温下挠性蠕变变形测定 Advanced technical ceramics - Monolithic ceramics; Thermo-mechanical properties - Part 4: Determination of flexural creep deformation at elevated temperatures; German version ENV 820-4:2001
EN 1094-1-1997 绝缘耐火产品 第1部分:陶瓷纤维产品术语 Insulating refractory products - Part 1: Terminology for ceramic fibre products
EN 1094-3-2003 绝缘耐火产品 第3部分:陶瓷纤维制造的绝缘产品分类 Insulating refractory products - Part 3: Classification of insulating products made from ceramic fibres
EN 50324-1-2002 陶瓷材料和部件的压电特性 第1部分:定义与分类 Piezoelectric properties of ceramic materials and components - Part 1: Terms and definitions
EN 50324-2-2002 陶瓷材料和部件的压电特性 第2部分:测量方法及特性 低功率 Piezoelectric properties of ceramic materials and components - Part 2: Methods of measurement; Low power
EN 50324-3-2002 陶瓷材料和部件的压电特性 第3部分:测量方法高功率 Piezoelectric properties of ceramic materials and components - Part 3: Methods of measurement; High power
ENV 1094-7-1993 绝缘耐火产品 第7部分:陶瓷纤维产品试验方法 Insulating refractory products - Part 7: Methods of test for ceramic fibre products
ENV 12212-1995 高级工业陶瓷 统一分类方法 Advanced technical ceramics - Unified method for classification
GB 12651-2003 与食物接触的陶瓷制品铅、镉溶出量允许极限 Standard permissible limits of lead and cadmium release from ceramic ware in contact with food
GB 13691-1992 陶瓷生产防尘技术规程 Safety code for the dust protecting technique of the ceramic production
GB/T 11309-1989 压电陶瓷材料性能测试方法纵向压电应变常数d33的准静态测试 Test methods for the properties of piezoelectric ceramics--Quasi-static testfor piezoelectric strain content d33
GB/T 11310-1989 压电陶瓷材料性能测试方法相对自由介电常数温度特性的测试 Test methods for the properties of piezoelectric ceramics--Test methods for temperature characteristics of relative free dielectric constants
GB/T 11311-1989 压电陶瓷材料性能测试方法泊松比σE的测试 Test methods for the properties of piezoelectric ceramics--Test for Poisson’s ratio σE
GB/T 11312-1989 压电陶瓷材料和压电晶体声表面波性能测试方法 Test methods for SAW properties of piezoelectric ceramics and crystals
GB/T 11320-1989 压电陶瓷材料性能测试方法低机械品质因数压电陶瓷材料性能的测试 Test methods for the properties of piezoelectric ceramics--Material with the low mechanical quality factor
GB/T 11387-1989 压电陶瓷材料静态弯曲强度试验方法 Testing method for static flexural strength of piezoellectric ceramics
GB/T 13841-1992 电子陶瓷件表面粗糙度 Surface roughness for electronic ceramic parts
GB/T 14389-1993 工程陶瓷冲击韧性试验方法 Test method for impact toughness of high performance ceramics
GB/T 14390-1993 工程陶瓷高温弯曲强度试验方法 Test method for flexural strength of highperformance ceramics at elevated temperature
GB/T 15155-1994 滤波器用压电陶瓷材料通用技术条件 Generic specification for piezoelectric ceramic for use in filters
GB/T 15750-1995 压电陶瓷材料老化性能试验规程 Test program for the ageing properties ofpiezoelectric ceramics
GB/T 16528-1996 压敏电阻器用氧化锌陶瓷材料 Zinc oxide ceramics for use in varistors
GB/T 16533-1996 多孔陶瓷产品通用技术条件 General specification for porous ceramic products
GB/T 16534-1996 工程陶瓷维氏硬度试验方法 Test method for Vickers hardness of high performance ceramics
GB/T 16535-1996 工程陶瓷线热膨胀系数试验方法 Test method for linear thermal expansion of high performance ceramics
GB/T 16536-1996 工程陶瓷抗热震性试验方法 Test method for thermal shock resistance of high performance ceramics
GB/T 17911-2006 耐火材料陶瓷纤维制品试验方法 Refractory products - Methods of test for ceramic fibre products
GB/T 17991-1999 工业陶瓷及相关术语 Definitions of terms relating to industrial ceramics
GB/T 2413-1980 压电陶瓷材料体积密度测量方法 Piezoelectric ceramic materials--Measuring methods for determination of volume density
GB/T 2414.1-1998 压电陶瓷材料性能试验方法圆片径向伸缩振动模式 Test methods for the properties of piezoelectric ceramics--Radial extension vibration mode for disk
GB/T 2414.2-1998 压电陶瓷材料性能试验方法长条横向长度伸缩振动模式 Test methods for the properties of piezoelectric ceramics--Transverse length extension vibration mode for bar
GB/T 3003-2006 耐火材料陶瓷纤维及制品 Refractory - Ceramic fibre and the products
GB/T 3295-1996 陶瓷制品45°镜向光泽度试验方法 Standard test method for 45°specular gloss of ceramic ware
GB/T 3388-2002 压电陶瓷材料型号命名方法 Designations for types of piezoelectric ceramics
GB/T 3389.2-1999 压电陶瓷材料性能测试方法纵向压电应变常数d33的静态测试 Testmethods for the properties of piezoelectric ceramics--Static test for piezoelectric strain constant d33
GB/T 3389.3-2001 压电陶瓷材料性能试验方法居里温度TC的测试 Test methods for the properties of piezoelectric ceramics test for Curie temperature TC
GB/T 3389.4-1982 压电陶瓷材料性能测试方法柱体纵向长度伸缩振动模式 Test methods for the properties of piezoelectric ceramics--Longitudinal length extension vibration mode for rod
GB/T 3389.5-1995 压电陶瓷材料性能测试方法圆片厚度伸缩振动模式 Test methods for the properties of piezoelectric ceramics--Thickness extension vibration mode for disk
GB/T 3389.6-1997 压电陶瓷材料性能测试方法长方片厚度切变振动模式 Test methods for the properties of piezoelectric ceramics--Thickness-shear vibration mode for rectangular plate
GB/T 3389.7-1986 压电陶瓷材料性能测试方法强场介电性能的测试 Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field
GB/T 3389.8-1986 压电陶瓷材料性能测试方法热释电系数的测试 Test methods for the properties of piezoelectric ceramics--Test for the pyroelectric coefficient
GB/T 4308-1984 金属陶瓷热挤压模坯 Cermet hot extrusion die blank
GB/T 4734-1996 陶瓷材料及制品化学分析方法 Methods of chemical analysis for ceramic materials and articles
GB/T 4738.1-1984 日用陶瓷材料耐酸、耐碱性能测定方法 (块状法) Standard test method for acid, alkaline resistance for ceramic materials of daily use (lump test method)
GB/T 4738.2-1984 日用陶瓷材料耐酸、耐碱性能测定方法 (颗粒法) Standard test method for acid, alkaline resistance for ceramic materials of daily use (particle test method)
GB/T 4740-1999 陶瓷材料抗压强度试验方法 Standard test method for compressive resistance ceramic materials
GB/T 4741-1999 陶瓷材料抗弯曲强度试验方法 Standard test method for bending strength of ceramic materials
GB/T 5593-1996 电子元器件结构陶瓷材料 Structure ceramic materials used in electronic components
GB/T 5594.1-1985 电子元器件结构陶瓷材料性能测试方法气密性测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for gas-tightness
GB/T 5594.2-1985 电子元器件结构陶瓷材料性能测试方法杨氏弹性模量、泊松比测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for Youngs elastic modulus and Poisson ratio
GB/T 5594.3-1985 电子元器件结构陶瓷材料性能测试方法平均线膨胀系数测试方法 Test methods for properties of structure ceramic used in electronic components--Test methodfor mean coefficient of linear expansion
GB/T 5594.4-1985 电子元器件结构陶瓷材料性能测试方法介质损耗角正切值的测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for dielectric loss angle tangent value
GB/T 5594.5-1985 电子元器件结构陶瓷材料性能测试方法体积电阻率测试方法 Test methods for properties of structure ceramic used in electronic components--Test method forvolume resistivity
GB/T 5594.6-1985 电子元器件结构陶瓷材料性能测试方法化学稳定性测试方法 Test methods for properties of structure ceramic used in electronic components--Test method forchemical durability
GB/T 5594.7-1985 电子元器件结构陶瓷材料性能测试方法透液性测定方法 Test methods for properties of structure ceramic used in electronic components--Test method for liquid permeability
GB/T 5594.8-1985 电子元器件结构陶瓷材料性能测试方法显微结构的测定 Test methods for properties of structure ceramic used in electronic components--Determination of microstructure
GB/T 6426-1999 铁电陶瓷材料电滞回线的准静态测试方法 Quasi-static test method for ferroelectric hysteresis loop of ferroelectric ceramics
GB/T 9587-1988 阳极耗散功率大于1kW的金属陶瓷发射管空白详细规范(可供认证用) Blank detail specification for metal ceramic transmitting tubes of anode dissipation over 1kW
HG/T 3210-2002 耐酸陶瓷材料性能试验方法 ()
IEC 60168 Edition 4.2-2001 标称电压大于1000V的系统用陶瓷材料或玻璃的户内和户外柱式绝缘子试验 Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
IEC 60591-1978 公称电压高于1000v的架空线路用陶瓷材料或玻璃绝缘子采用统计控制方法进行机械和机电试验时的取样规则和验 Sampling rules and acceptance criteria when applying statistical control methods for mechanical and electromechanical tests on insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V
ISO 10635-1999 耐火制品 陶瓷纤维制品的试验方法 Refractory products - Methods of test for ceramic fibre products
ISO 13356-1997 外科植入物 含有稳定氧化钇的四方形氧化锆陶瓷材料 Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
ISO 14704 Technical Corrigendum 1-2004 精细陶瓷(高级陶瓷、高级工业陶瓷).室温下块体陶瓷弯曲强度的试验方法.技术勘误1 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature; Technical Corrigendum 1
ISO 15732-2003 精细陶瓷(高级陶瓷、高级工业陶瓷).室温下用单边预裂束法(SEPB)测定块体陶瓷破裂韧性的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
ISO 17561-2002 精细陶瓷(高级陶瓷、高级工业陶瓷).室温下通过声共振对整块陶瓷弹性模量的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
ISO 17565-2003 细陶瓷(高级陶瓷、高级工业陶瓷).高温下块体陶瓷弯曲强度的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature
ISO 18452-2005 精密陶瓷(高级陶瓷、高级工业陶瓷).用接触式探针轮廓测定仪测定陶瓷覆层厚度 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer
ISO 18753-2004 精细陶瓷(高级陶瓷、高级工业陶瓷).用比重计测定陶瓷粉末的绝对密度 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer
ISO 18754-2003 精细陶瓷(高级陶瓷和高级工业陶瓷).密度和表观孔隙率的测定 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity
ISO 18755-2005 细陶瓷(高级陶瓷、高级工业陶瓷).用激光闪光法测定块体陶瓷的热扩散 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method
ISO 18756-2003 细陶瓷(高级陶瓷、高级工业陶瓷).用弯曲时的表面裂纹(SCF)法测定室温下块体陶瓷的断裂韧性 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
ISO 18757-2003 细陶瓷(高级陶瓷、高级工业陶瓷).利用BET法通过气体吸收率测定陶瓷粉末的比表面积 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
ISO 20501-2003 细陶瓷(高级陶瓷、高级工业陶瓷).强度数据的维伯统计 Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data
ISO 20502-2005 细陶瓷(高级陶瓷、高级工业陶瓷).用划痕试验测定陶瓷涂层的粘附性 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing
ISO 20504-2006 精细陶瓷(高级陶瓷、高级工业陶瓷).在室温下连续纤维增强复合材料的压缩特性试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature
ISO 20505-2005 精密陶瓷(高级陶瓷、高级工业陶瓷).用双凹口试件挤压和Iosipescu试验在环境温度下连续纤维增强复合材料层间 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
ISO 20506-2005 细陶瓷(高级陶瓷、高级工业陶瓷).在室温下用Iosipescu试验测定连续纤维增强复合材料的面内剪切强度 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test
ISO 20507-2003 细陶瓷(高级陶瓷、高级工业陶瓷).词汇 Fine ceramics (advanced ceramics, advanced technical ceramics) - Vocabulary
ISO 20508-2003 细陶瓷(高级陶瓷、高级工业陶瓷).有透明衬底的陶瓷膜的透光系数的测定 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of light transmittance of ceramic films with transparent substrate
ISO 20509-2003 细陶瓷(高级陶瓷、高级工业陶瓷).非氧化块体陶瓷的抗氧化性测定 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics
ISO 20808-2004 精细陶瓷(高级陶瓷、高级工业陶瓷).用球盘法测定块体陶瓷的摩擦和磨损特性 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
ISO 22214-2006 精细陶瓷(高级陶瓷、高级工业陶瓷).室温下单片陶瓷周期性弯曲疲劳的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for cyclic bending fatigue of monolithic ceramics at room temperature
ISO 22215-2006 精细陶瓷(高级陶瓷、高级工业陶瓷).单片陶瓷拉伸蠕变试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile creep of monolithic ceramics
ISO 24369-2005 细陶瓷(高级陶瓷、高级工业陶瓷).用湿筛分法测定陶瓷粉末的粗晶粒含量 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of content of coarse particles in ceramic powders by wet sieving method
ISO 24370-2005 细陶瓷(高级陶瓷、高级工业陶瓷).室温下用锯齿形切口试杆(CNB)法测定单片陶瓷断裂韧性的试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method
ISO 6474-1994 外科植入物 高纯氧化铝陶瓷材料 Implants for surgery; ceramic materials based on high purity alumina
ISO 6486-1-1999 与食物接触的陶瓷制品、玻璃陶瓷制品和玻璃餐具 铅、镉溶出量 第1部分:检验方法 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Test method
ISO 6486-2-1999 与食物接触的陶瓷制品、玻璃陶瓷制品和玻璃餐具 铅、镉溶出量 第2部分:允许极限 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 2: Permissible limits
ISO/TTA 1-1994 高级工业陶瓷 统一分类体系 Advanced technical ceramics - Unified classification system
JB/T 10111-1999 灭弧罩陶瓷件及其材料 ()
JB/T 6829-1993 金属陶瓷X 射线管 技术条件 ()
JC/T 897-2002 抗菌陶瓷制品抗菌性能 ()
JIS A5207-2005 卫生陶瓷制品 Sanitary wares
JIS H8306-2002 金属陶瓷热喷镀 Cermet thermal spraying
JIS H8667-2002 金属陶瓷喷镀涂层的试验方法 Test methods for cermet sprayed coatings
JIS H9303-2004 金属陶瓷喷镀涂层的推荐规程 Recommended practice for cermet sprayed coatings
JIS R1657-2003 连续纤维增强陶瓷基质复合材料用连续陶瓷纤维的测试方法 Testing methods of continuous ceramic fibers for continuous fiber-reinforced ceramic matrix composites
JIS R1701-1-2004 精细陶瓷(高级陶瓷、高级工业陶瓷).光催化材料的空气净化性能试验方法.第1部分:氧化氮的清除 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials -- Part 1: Removal of nitric oxide
JIS R3311-1991 陶瓷纤维毡 Ceramic fiber blanket
JIS T6118-2005 金属陶瓷的牙科修复系统.贵金属 Metal-ceramic dental restorative systems -- Precious metals
JIS T6120-2001 金属陶瓷牙科修复系统.试验方法 Metal-ceramic dental restorative systems -- Test methods
JIS T6121-2005 金属陶瓷牙科修复系统.金属 Metal-ceramic dental restorative systems -- Metals
NF A92-801-1-2003 高级工业陶瓷.陶瓷覆层的试验方法.第1部分:用接触式探针轮廓测定仪测定覆层厚度 (Advanced technical ceramics - Methods of test for ceramic coatings - Part 1 : determination of coating thickness by contact probe filometer.)
NF A92-801-2-2003 高级工程陶瓷.陶瓷覆层的试验方法.第2部分:用环形研磨法测定覆层厚度 (Advanced technical ceramics - Methods of test for ceramic coatings - Part 2 : determination of coating thickness by the crater grinding method.)
NF B40-010-1997 耐火制品.第1部分:陶瓷纤维制品的术语(欧洲标准EN 1094-1) (INSULATING REFRACTORY PRODUCTS. PART 1 : TERMINOLOGY FOR CERAMIC FIBRE PRODUCTS. (EUROPEAN STANDARD EN 1094-1).)
NF B41-204-2002 工程陶瓷.单片陶瓷.一般特征和结构特征.第3部分:粒度和粒径分布的测定(用线性截断法表征) (Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3 : determination of grain size and size distribution (characterized by the linear intercept method).)
NF B41-210-1-2003 高级工业陶瓷.整体陶瓷的试验方法.热机械特性.第1部分:高温下挠曲强度的测定 (Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1 : determination of flexural strength at elevated temperatures.)
NF B41-210-2-2003 高级工业陶瓷.整体陶瓷的试验方法.热机械特性.第2部分:自重变形的测定 (Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2 : determination of self-loaded deformation.)
NF B42-006-1996 高级工业陶瓷.陶瓷粉末试验方法.第6部分:比表面积的测定 (Advanced technical ceramics. Methods of test for ceramic powders. Part 6 : determination of the specific surface area.)
NF B42-007-1996 高级工业陶瓷.陶瓷粉末的试验方法.第7部分:绝对密度的测定 (Advanced technical ceramics. Methods of test for ceramic powders. Part 7 : determination of the absolute density.)
NF B42-012-2002 高级工程陶瓷.陶瓷粉末的试验方法.第12部分:锆氧土的化学分析 (Advanced technical ceramics - Methods of test for ceramic powders - Part 12 : chemical analysis of zirconia.)
NF B43-202-2003 高级工业陶瓷.室温下陶瓷复合材料的机械性能.第2部分:抗压性能的测定 (Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2 : determination of compression properties.)
NF B43-203-2002 高级工业陶瓷.室温下陶瓷合成材料的机械特性.第3部分:抗弯强度的测定 (Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3 : determination of flexural strength.)
NF B43-204-2003 高级工业陶瓷.室温下陶瓷复合材料的机械性能.第4部分:通过对切口试样的压缩负荷测定内层的剪切强度 (Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4 : determination of interlaminar shear strength by compression loading of notched test specimens.)
NF B43-205-2003 高级工业陶瓷.室温下陶瓷复合材料的机械性能.第5部分:利用瞬间弯曲试验测定内层状剪切强度(三点法) (Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).)
NF B43-207-2003 高级工业陶瓷.陶瓷复合材料.热物理性能.第1部分:热膨胀的测定 (Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 : determination of thermal expansion.)
NF B43-210-2003 高级工业陶瓷.陶瓷复合材料的热物理性能.第3部分:比热的测定 (Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3 : determination of specific heat capacity.)
NF B43-303-2003 高级工业陶瓷.陶瓷复合材料在高温、大气压和空气中的机械性能.压缩性能的测定 (Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties.)
NF B43-305-2003 高级工业陶瓷.在大气压力下高温时陶瓷复合物的机械特性.挠曲强度的测定 (Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength.)
NF C26-501-1-2002 陶瓷材料和元件的压电特性.第1部分:术语和定义 (Piezoelectric properties of ceramic materials and components - Part 1 : terms and definitions.)
NF C26-501-2-2002 陶瓷材料和元件的压电特性.第2部分:低功率测量方法 (Piezoelectric properties of ceramic materials and components - Part 2 : methods of measurement - Low power.)
NF C26-501-3-2002 陶瓷材料和元件的压电特性.第3部分:高功率测量方法 (Piezoelectric properties of ceramic materials and components - Part 3 : properties and methods of measurement - High power.)
NF D14-601-1986 卫生设备.涂釉的卫生陶瓷制品.一般技术规范 (SANITARY APPLIANCES. VITREOUS ENAMELLED SANITARY CERAMIC. GENERAL SPECIFICATIONS.)
NF D21-631-1997 与食品接触的材料和物品.陶瓷材料半透明性试验方法(欧洲标准EN 184) (Materials and articles in contact with foodstuffs. Test methods for translucency of ceramic articles.)
NF S90-408-1981 外科医疗器械.外科植入物.氧化铝陶瓷制品 (MEDICAL AND SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. CERAMIC MATERIALS BASED ON ALUMINA.)
NF S91-233-2000 牙科金属陶瓷修补材料 (Metal-ceramic dental restorative systems.)
NF S94-063-1997 外科植入物.钇稳定处理的四方形锆基陶瓷材料 (Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP).)
NF T25-710-2002 高级工业陶瓷.增强度试验方法.第1部分:测定尺寸范围 (Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1 : determination of size content.)
NF T25-711-2002 高级工业陶瓷.陶瓷合成材料.第2部分:测定线性密度 (Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 2 : determination of linear density.)
NF T25-712-2002 高级工业陶瓷.陶瓷合成材料.第3部分:测定线直径和截面面积 (Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3 : determination of filament diameter and cross-section area.)
NF T25-715-2003 高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.第5部分:室温下复丝束中长丝拉伸强度分布和断裂时拉伸应变 (Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5 : determination of distribution of tensile strength and of tensile strain to failure of filaments within)
QB/T 1010-1999 陶瓷材料、颜料真密度的测定 ()
QB/T 1321-1991 陶瓷材料平均线热膨胀系数测定方法 ()
QB/T 1547-1992 陶瓷材料烧法温度范围测定方法 ()
SH/T 3128-2002 一般炼油装置火焰加热炉陶瓷纤维衬里 ()
YS/T 518-2006 金属陶瓷热挤压模坯 ()
编号中文名称英文名称

返回