| 编号 | 中文名称 | 英文名称 |
|---|
| BS 5499-1-2002
| 图形符号和标志.包括消防安全标志在内的安全性标志.几何图形、颜色和布置规范
| Graphical symbols and signs - Safety signs, including fire safety signs - Specification for geometric shapes, colours and layout
|
| BS 5499-10-2006
| 包括防火安全标志的安全标志.包括防火安全标志的安全标志使用实施规则
| Safety signs, including fire safety signs - Code of practice for the use of safety signs, including fire safety signs
|
| BS 5499-11-2002
| 图形符号和标志.安全标志，包括防火安全标志.水域安全性标志
| Graphical symbols and signs - Safety signs, including fire safety signs - Water safety signs
|
| BS 5499-2-1986
| 消防安全标志、通告和图形符号.第2部分:自发光标记规范
| Fire safety signs, notices and graphic symbols - Specification for self-luminous fire safety signs
|
| BS 5499-4-2000
| 消防安全标志、包括防火灾安全符号.逃离路线标记的实施规程
| Safety signs, including fire safety signs - Code of practice for escape route signing
|
| BS 5499-5-2002
| 图形符号和标志.安全性标志，包括防火安全标志.含有特殊安全性意义的标志
| Graphical symbols and signs - Safety signs, including fire safety signs - Signs with specific safety meanings
|
| BS 5499-6-2002
| 图形符号和标志.包括防火安全标志的安全标志.用于安全标志的图形符号的形成和设计.要求
| Graphical symbols and signs - Safety signs, including fire safety signs - Creation and design of graphical symbols for use in safety signs - Requirements
|
| BS 6854-1-1987
| 木工机械安全装置实用规程.第1部分:一般推荐标准
| Code of practice for safeguarding woodworking machines. General recommendations
|
| BS 6854-2-1988
| 木工机械安全装置实用规程.第2部分:圆锯木机(装有旋转刀具的圆形锯木机)
| Code of practice for safeguarding woodworking machines. Circular sawing machines (sawing machines with rotating tools)
|
| BS 6854-3-1989
| 木工机械安全装置实用规程.第3部分:垂直主轴制模、造模铣和成形机械(用于单面修整的制模机)
| Code of practice for safeguarding woodworking machines. Vertical spindle moulding, routing and shaping machines (moulding machines for one side dressing)
|
| BS 6854-5-1989
| 木工机械安全装置实用规程.第5部分:窄带锯木机
| Code of practice for safeguarding woodworking machines. Narrow band sawing machines
|
| BS 6912-19-1996
| 土方机械安全.机械操作人员座椅的尺寸和要求用规范
| Safety of earth-moving machinery - Specification for dimensions and requirements for operator's seat
|
| BS 6912-20-1996
| 运土机械安全性.操作者控制系统
| Safety of earth-moving machinery - Specification for operator's controls
|
| BS 6912-21-1996
| 运土机械安全性.照明、信号灯和标记灯、以及反射式反射镜装置
| Safety of earth-moving machinery - Specification for lighting, signalling and marking lights, and reflex-reflector devices
|
| BS 6912-22.1-1996
| 运土机械安全性.第22部分:驾驶室环境.第1节:综述和定义
| Safety of earth-moving machinery - Operator enclosure environment - General and definitions
|
| BS 6912-22.2-1996
| 运土机械安全性.第22部分:驾驶室环境.第2节:空气过滤器试验
| Safety of earth-moving machinery - Operator enclosure environment - Air filter test
|
| BS 6912-22.3-1996
| 运土机械安全性.第22部分:驾驶室环境.第3节:驾驶室增压试验方法
| Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure pressurization test method
|
| BS 6912-22.4-1996
| 运土机械安全性.第22部分:驾驶室环境.第4节:驾驶室的通风、加热和/或空调试验法
| Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure ventilation, heating and/or air-conditioning test method
|
| BS 6912-22.5-1996
| 运土机械安全性.第22部分:驾驶室环境.第5节:挡风玻璃解冻系统试验方法
| Safety of earth-moving machinery - Operator enclosure environment - Windscreen defrosting system test method
|
| BS 6912-22.6-1996
| 运土机械安全性.第22部分:驾驶室环境.第6节:驾驶室上面太阳能加热效应的测定
| Safety of earth-moving machinery - Operator enclosure environment - Determination of the effect of solar heating on the operator enclosure
|
| BS 6912-23-1996
| 运土机械安全性.第23部分:安全信号和危险图号.一般原理
| Safety of earth-moving machinery - Safety signs and hazard pictorials - General principles
|
| BS 6912-5-1992
| 运土机械安全性.第5部分:最小入口尺寸推荐标准
| Safety of earth-moving machinery. Recommendations for minimum access dimensions
|
| BS 6912-8-1992
| 运土机械安全性.第8部分:铰接式车架锁紧装置的性能要求规范
| Safety of earth-moving machinery - Specification for performance requirements of an articulated frame locking device
|
| BS 7907-1997
| 提高机械安全性的儿童服装设计和生产实用规程
| Code of practice for the design and manufacture of children's clothing to promote mechanical safety
|
| BS 848-5-1999
| 一般用途风扇.机械安全专用(保护)
| Fans for general purposes - Special for mechanical safety (guarding)
|
| BS DD CLC/TS 50418-2004
| 机械安全.电感防护设备.无源红外线防护设备(PIPDs)
| Safety of machinery - Electro-sensitive protective equipment - Passive infra-red protective devices (PIPDs)
|
| BS DD CLC/TS 61496-2-2004
| 机械安全.电感防护设备.使用有源光电防护器件的设备的特殊要求
| Safety of machinery - Electro-sensitive protective equipment - Particular requirements for equipment using active opto-electronic protective devices (AOPD)
|
| BS DD CLC/TS 61496-3-2004
| 机械安全.电感防护设备.响应漫反射的有源光电防护设备的特殊要求(AOPDDR)
| Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
|
| BS DD CLC/TS 62046-2005
| 机械安全.检测时人的防护设备的应用
| Safety of machinery - Application of protective equipment to detect the presence of persons
|
| BS DD ENV 581-2-2000
| 室外家具.野营、家用和工作用桌椅.桌椅的机械安全性要求和试验方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for seating
|
| BS EN 1005-2-2003
| 机械安全.人体特性.机械和机械元部件的人工搬运
| Safety of machinery - Human physical performance - Manual handling of machinery and component parts of machinery
|
| BS EN 1005-3-2002
| 机械安全.人体特性.机械操作的推荐使用的力极限值
| Safety of machinery - Human physical performance - Recommended force limits for machinery operation
|
| BS EN 1005-4-2005
| 机械安全.人体特性.有关机械的工作姿势和活动的评价
| Safety of machinery - Human physical performance - Evaluation of working postures and movements in relation to machinery
|
| BS EN 1005-5-2007
| 机械安全.人体特性.高频率重复操作的风险评估
| Safety of machinery - Human physical performance - Risk assessment for repetitive handling at high frequency
|
| BS EN 1010-1-2004
| 机械安全.印刷和纸加工机械的设计和建造的安全要求.通用要求
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Common requirements
|
| BS EN 1010-2-2006
| 机械安全性.印刷机和换纸机的设计和建造的安全要求.包括预压机械的印刷机和涂漆机
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
|
| BS EN 1010-3-2003
| 机械安全.印刷和纸加工机械的设计和制造的安全要求.切纸机
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines
|
| BS EN 1010-4-2004
| 机械安全.设计和生产打印机和纸加工机的安全要求.装订机、纸加工机和装饰机
| Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Bookbinding, paper converting and finishing machines
|
| BS EN 1023-2-2000
| 办公家具.遮板.机械安全性要求
| Office furniture - Screens - Mechanical safety requirements
|
| BS EN 1034-13-2005
| 机械安全.造纸和整饰机械的设计和建造用安全要求.第13部分:货物和装置除线用机器
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
|
| BS EN 1034-14-2005
| 机械安全.造纸机械和精整机设计和结构的安全要求.卷纸切纸机
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter
|
| BS EN 1034-2-2005
| 机械安全.造纸机和修整机的设计和建造的安全要求.第2部分:鼓式剥皮机
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
|
| BS EN 1034-22-2005
| 机械安全.纸张制造和整饰机械设计和建造的安全要求.碎木机
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Woodgrinders
|
| BS EN 1034-4-2005
| 机械安全.造纸机械和精整机设计和结构的安全要求.碎浆机和装载工具
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities
|
| BS EN 1034-6-2005
| 机械安全.造纸和整饰机械的设计和建造用安全要求.第6部分:砑光机
| Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender
|
| BS EN 1034-7-2005
| 机械安全.纸张制造和整饰机械设计和建造的安全要求.箱
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
|
| BS EN 1088 1995 + A1-1996
| 机械安全.与保护装置结合的联锁装置.设计和选择原则
| Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
|
| BS EN 1093-2-2006
| 机械安全.空气中有害物质排放的评估.特定污染物排放率测量用示踪气体法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given pollutant
|
| BS EN 1093-3-2006
| 机械安全.空气中有害物质排放的评估.第3部分:特定污染物排放率的测量用试验台方法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
|
| BS EN 1093-4-1996
| 机械安全.空气中有害物质排放的评估.除尘系统的吸收效率.示踪法
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Capture efficiency of an exhaust system - Tracer method
|
| BS EN 12198-1-2000
| 机械安全.评估和降低机器辐射产生的风险.总则
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - General principles
|
| BS EN 12198-2-2002
| 机械安全.由机器辐射而产生的危害的评估和降低.辐射测量规程
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Radiation emission measurement procedure
|
| BS EN 12198-3-2002
| 机械安全.机器辐射而产生的风险的评估和降低.通过衰减或屏蔽降低辐射
| Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Reduction of radiation by attenuation or screening
|
| BS EN 12750-2001
| 木工机械安全性.四边造型机
| Safety of woodworking machines - Four-sided moulding machines
|
| BS EN 12779-2005
| 木工机械安全.带固定装置的碎屑和灰尘排放装置.安全相关性能和安全要求
| Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements
|
| BS EN 12786-1999
| 机械安全.安全标准中振动条款编写指南
| Safety of machinery - Guidance for the drafting of vibration clauses of safety standards
|
| BS EN 13210-2004
| 儿童护理用品.儿童安全背带、学步绳和类似物品.安全要求和试验方法
| Child care articles - Children's safety harnesses, reins and similar type articles - Safety requirements and test methods
|
| BS EN 13478-2002
| 机械安全性.防火与消防措施
| Safety of machinery - Fire prevention and protection
|
| BS EN 13675-2004
| 机械安全.管道成型和轧制机及其精整作业线设备的安全要求
| Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
|
| BS EN 13861-2002
| 机械安全.机械设计中人类工效学应用指南
| Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
|
| BS EN 14010-2004
| 机械安全.摩托车的动力传动停车设备.设计、生产、装配和交付使用阶段的安全和EMC要求
| Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
|
| BS EN 14656-2006
| 机械安全.钢和有色金属用挤压机的安全要求
| Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
|
| BS EN 14673-2006
| 机械安全.钢和有色金属锻制的液压动力开模热锻锻压机的安全要求
| Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
|
| BS EN 1746-1999
| 机械安全.安全标准噪声条款编写指南
| Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
|
| BS EN 1760-1-1998
| 机械安全.压力敏感防护装置.压力敏感垫和压力敏感地板的设计和试验通用规则
| Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
|
| BS EN 1760-2-2001
| 机械安全.压敏防护装置.压敏垫和压敏楼板设计和试验通用规则
| Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
|
| BS EN 1760-3-2004
| 机械安全.压敏防护装置.压敏减震器、板材、线材和类似设备的设计和试验通用规则
| Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
|
| BS EN 1807-1999
| 木工机械安全.带锯机械
| Safety of woodworking machines - Band sawing machines
|
| BS EN 1837-1999
| 机械安全.机械的整体照明
| Safety of machinery - Integral lighting of machines
|
| BS EN 1870-1-2007
| 木工机械安全.圆盘锯机床.圆盘锯架(带和不带滑动台)、方板锯和建筑工地用锯
| Safety of woodworking machines - Circular sawing machines - Circular saw benches (with and without sliding table), dimension saws and building site saws
|
| BS EN 1870-16-2005
| 木工机械安全.圆盘锯床.V切割用双斜角锯床
| Safety of woodworking machines - Circular sawing machines - Double mitre sawing machines for V-cutting
|
| BS EN 1870-3-2001
| 木工机械安全.圆盘锯床.下横切锯、两用下横切锯和圆锯台
| Safety of woodworking machines - Circular sawing machines - Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
|
| BS EN 294-1992
| 机械安全.避免上肢可触及危险区的安全距离
| Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs
|
| BS EN 294-1992
| 机械安全.避免上肢可触及危险区的安全距离
| Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs
|
| BS EN 349-1993
| 机械安全.避免挤压人体各部位的最小空间
| Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
|
| BS EN 4057-405-2005
| 导线电缆扎匝.试验方法.第405部分:罗盘安全距离
| Cable ties for harnesses - Test methods - Part 405: Compass safe distance
|
| BS EN 414-2000
| 机械安全性.安全性标准的起草和报批规则
| Safety of machinery - Rules for the drafting and presentation of safety standards
|
| BS EN 415-5-2006
| 包装机械安全.包装机械
| Safety of packaging machines - Wrapping machines
|
| BS EN 415-7-2006
| 包装机械安全.组件和二次包装机械
| Safety of packaging machines - Group and secondary packaging machines
|
| BS EN 474-3-1996
| 土方机械安全性.第3部分:装载机的要求
| Earth-moving machinery - Safety - Requirements for loaders
|
| BS EN 474-4-1996
| 土方机械安全性.第4部分:反铲装载机的要求
| Earth-moving machinery - Safety - Requirements for backhoe loaders
|
| BS EN 50144-2-15-2001
| 手持电动工具的安全.树篱修剪机的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for hedge trimmers
|
| BS EN 50144-2-16-2003
| 手持电动工具的安全.用平头钉钉东西的工具的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for tackers
|
| BS EN 50144-2-3-2002
| 手持电动工具的安全.研磨机、圆盘砂轮机和抛光机的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers
|
| BS EN 50144-2-7-2001
| 手持电动工具的安全性.喷枪专门要求
| Safety of hand-held electric motor operated tools - Particular requirements for spray guns
|
| BS EN 527-2-2003
| 办公家具.工作台和写字台.机械安全要求
| Office furniture - Work tables and desks - Mechanical safety requirements
|
| BS EN 574-1997
| 机械安全性.双柄控制装置.功能特性.设计原理
| Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
|
| BS EN 581-3-2007
| 户外家具.野营、家用和办公用座椅和桌子.桌子的机械安全要求和试验方法
| Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for tables
|
| BS EN 60204-1-2006
| 机械安全性.机械用电气设备.一般要求
| Safety of machinery - Electrical equipment of machines - General requirements
|
| BS EN 60204-32-1998
| 机械安全性.机械用电气设备.提升机要求
| Safety of machinery - Electrical equipment of machines - Requirements for hoisting machines
|
| BS EN 60745-2-1-2003
| 手持式电动工具的安全.电钻和冲击钻的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for drills and impact drills
|
| BS EN 60745-2-11-2003
| 手持式电动工具的安全.往复锯(曲线锯和刀锯)的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)
|
| BS EN 60745-2-12-2003
| 手持式电动工具的安全.混凝土振捣器的特殊要求
| Hand-held motor-operated electric tools - Safety Part 2-12:Particular requirements for concrete vibrators
|
| BS EN 60745-2-17-2003
| 手持式电动工具的安全.木铣和修整机的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers
|
| BS EN 60745-2-2-2003
| 手持式电动工具的安全.电动旋具和冲击扳手的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for screwdrivers and impact wrenches
|
| BS EN 60745-2-4-2003
| 手持式电动工具的安全.盘式除外的砂轮机和抛光机的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type
|
| BS EN 60745-2-5-2003
| 手持式电动工具的安全.圆盘锯的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for circular saws
|
| BS EN 60745-2-9-2003
| 手持式电动工具的安全.攻丝机的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for tappers
|
| BS EN 61029-2-11-2003
| 移动式电动工具的安全.组合横切锯和台锯的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for combined mitre and bench saws
|
| BS EN 61029-2-4-2003
| 移动式电动工具的安全.台式磨床的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for bench grinders
|
| BS EN 61029-2-8-2003
| 移动式电动工具的安全.单芯轴垂直模压机的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for single spindle vertical moulders
|
| BS EN 61029-2-9-2003
| 移动式电动工具的安全.斜切锯的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for mitre saws
|
| BS EN 61310-1-1995
| 机械安全.指示,标志和活动.第1部分:可视,可听和可触模信号要求
| Safety of machinery - Indication, marking and actuation - Requirements for visual, auditory and tactile signals
|
| BS EN 61310-2-1995
| 机械安全性.指示,标志和作动.第2部分:标志要求
| Safety of machinery - Indication, marking and actuation - Requirements for marking
|
| BS EN 61310-3-1999
| 机械安全性.指示、标志和作动.作动位置和操作要求
| Safety of machinery - Indication, marking and actuation - Requirements for the location and operation of actuators
|
| BS EN 61472-2005
| 带电作业.电压范围为72.5 kV至800 kV的交流系统的最小安全距离.计算方法
| Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
|
| BS EN 61496-1-2004
| 机械安全.电敏保护设备.一般要求和试验
| Safety of machinery - Electro-sensitive protective equipment - General requirements and tests
|
| BS EN 61496-3-2001
| 机械安全性.电敏防护设备.防漫反射有源光电子保护器件专门要求
| Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
|
| BS EN 61965-2003
| 阴极射线管的机械安全
| Mechanical safety of cathode ray tubes
|
| BS EN 62061-2005
| 机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
|
| BS EN 811-1997
| 机械的安全性.预防被低处部件碰撞的危险区安全距离
| Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
|
| BS EN 848-1-2007
| 木工机械安全.带旋转刀具的单面镂铣机.第1部分:单轴立式镂铣机
| Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
|
| BS EN 848-2-2007
| 木工机械安全.带旋转刀具的单面镂铣机.第2部分:单轴手动进料/一体进料镂铣机
| Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
|
| BS EN 848-3-2007
| 木工机械安全.旋转刀具单面模压机械.数控镗床和靠模铣床
| Safety of woodworking machines - One side moulding machines with rotating tools - Numerically controlled (NC) boring and routing machines
|
| BS EN 859-1998
| 木工机械安全.手送表面刨平机械
| Safety of woodworking machines - Handfed surface planing machines
|
| BS EN 860-2007
| 木工机械安全.单面厚度刨床
| Safety of woodworking machines - One side thickness planing machines
|
| BS EN 861-2007
| 木工机械安全.平面刨床和增厚机
| Safety of woodworking machines - Surface planing and thicknessing machines
|
| BS EN 953-1998
| 机械安全的性.防护装置.固定和移动防护装置的设计和构造的一般要求
| Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
| BS EN ISO 10418-2003
| 石油和天然气工业.近海生产装置.基础表面操作安全系统
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
| BS EN ISO 11161-2007
| 机械安全.集成制造系统.基本要求
| Safety of machinery - Integrated manufacturing systems - Basic requirements
|
| BS EN ISO 11553-1-2005
| 机械安全.激光加工机械.一般安全要求
| Safety of machinery - Laser processing machines - General safety requirements
|
| BS EN ISO 11553-2-2007
| 机械安全.激光加工机械.手持式激光加工设备的安全要求
| Safety of machinery - Laser processing machines - Safety requirements for hand-held laser processing devices
|
| BS EN ISO 12100-1-2003
| 机械安全.设计基本概念和一般原理.基本术语和方法
| Safety of machinery - Basic concepts, general principles for design - Basic terminology, methodology
|
| BS EN ISO 12100-2-2003
| 机械安全.设计基本概念和一般原理.技术原理
| Safety of machinery - Basic concepts, general principles for design - Technical principles
|
| BS EN ISO 13849-1-2006
| 机械安全.安全相关的控制系统部件.一般设计原则
| Safety of machinery - Safety-related parts of control systems - General principles for design
|
| BS EN ISO 13849-2-2003
| 机械安全.控制系统有关安全部分.确认
| Safety of machinery - Safety-related parts of control systems - Validation
|
| BS EN ISO 13850-2007
| 机械安全.紧急停止.设计原则
| Safety of machinery - Emergency stop - Principles for design
|
| BS EN ISO 14121-1-2007
| 机械安全.危险评估.原则
| Safety of machinery - Risk assessment - Principles
|
| BS EN ISO 14159-2004
| 机械安全.机械设计的卫生要求
| Safety of machinery - Hygiene requirements for the design of machinery
|
| BS EN ISO 21469-2006
| 机械安全.附带产品接触的润滑剂.卫生要求
| Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
|
| BS ISO 15870-2001
| 工业用机动卡车.安全标志和危险图示.一般原则
| Powered industrial trucks - Safety signs and hazard pictorials - General principles
|
| BS ISO 16069-2004
| 图形符号.安全标志.安全路径指示系统(SWGS)
| Graphical symbols - Safety signs - Safety way guidance systems (SWGS)
|
| BS ISO 17080-2007
| 手持便携式农业和林业机械与电动草坪和园艺设备.单面产品安全标签的设计原则
| Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels
|
| DD ENV 581-2-2000
| 户外家具.野营、家用和订做的座椅和桌子.座椅的机械安全要求和试验方法
| Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for seating
|
| FD E09-027-1999
| 机械安全性.控制系统与安全相关的零部件.第100部分:EN 954-1-1996的应用指南
| Safety of machinery - Safety-related parts of control systems - Part 100 : guide on the use and application of EN 954-1:1996.
|
| KT 8-1999
| 机械安全性
| Safety of machinery
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com