| 编号 | 中文名称 | 英文名称 |
|---|
| BS 2S 112-1964
| 飞机材料规范.易切削碳素钢、光亮冷拔棒(40-50吨力/平方英寸;最大直径或最小断面尺寸1/2英寸)(主要用于制造
| Specification for aircraft material - Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size 1/2 inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts)
|
| BS 2S 113-1964
| 飞机材料规范.机械制造用40号碳素钢光亮冷拔棒(45-55吨力/平方英寸;限定等圆断面1英寸)(主要用于制造螺母)
| Specification for aircraft material - '40' carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts)
|
| BS 2S 116-1964
| 飞机材料规范.机械制造用40号碳素钢光亮冷棒(55-65吨力/平方英寸;限定等圆断面1/4英寸)(主要用于制造螺栓)
| Specification for aircraft material - '40' carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section 3/4 inch) (primarily intended for the manufacture of machined bolts)
|
| BS 2SP 91-92-1973
| 飞行器用碳素钢蜗杆传动夹紧装置规范
| Specification for carbon steel worm drive clamps for aircraft
|
| BS 2W 12-1989
| 预制镀锌碳素钢丝绳规范(公制和英制系列)
| Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
|
| BS 3146-1-1974
| 金属熔模铸造规范.第1部分:碳素钢与低合金钢
| Specification for investment castings in metal - Carbon and low alloy steels
|
| BS 3293-1960
| 石油工业用碳素钢管法兰(标称尺寸24英寸以上)规范
| Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
|
| BS 3673-2-1965
| 弹簧固定环规范.第2部分:碳素钢E 型卡箍
| Specification for spring retaining rings - Carbon steel E clips
|
| BS 3673-3-1968
| 弹簧固定环规范.第3部分:碳素钢 C型卡箍
| Specification for spring retaining rings - Carbon steel C clips
|
| BS 3673-4-1977
| 弹簧固定环规范.第4部分:米制系列碳素钢开口簧环
| Specification for spring retaining rings - Carbon steel circlips - metric series
|
| BS 3S 105-1969
| 碳素钢(仅供锻造螺栓用的棒材)规范
| Specification for carbon steel (bar for the manufacture of forged bolts only)
|
| BS 405-1987
| 通用未涂覆的板网碳素钢薄板规范
| Specification for uncoated expanded metal carbon steel sheets for general purposes
|
| BS 4637-1970
| 盘簧(衬垫和底座)用碳素钢丝规范
| Specification for carbon steel wire for coiled springs (bedding and seating)
|
| BS 4638-1970
| Z形和方形弹簧用碳素钢丝规范
| Specification for carbon steel wire for zigzag and square-form springs
|
| BS 6043-1.1-2002
| 制铝工业用碳素材料的取样与试验方法.电极用沥青.取样
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Sampling - Section 1.1: Sampling
|
| BS 6043-1.10-2000
| 制铝工业用碳素材料的取样与试验方法.电极用沥青.挥发物含量的测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of volatile matter content - Section 1.10 Determination of volatile matter content
|
| BS 6043-1.11-2000
| 制铝工业用碳素材料的取样与试验方法.电极用沥青.喹啉不溶物中C/H原子比的测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of the atomic C/H ratio of the quinoline-insoluble material - Section 1.11 Determination of the atomic C/H ratio of the quinoline-insoluble material
|
| BS 6043-1.13-2000
| 制铝工业用碳素材料的取样与试验方法.电极用沥青.硫含量的测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of sulfur content - Section 1.13 Determination of sulfur content
|
| BS 6043-1.6-1998
| 制铝工业用碳素材料的取样与试验方法.电极用沥青.焦化值测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of coking value - Section 1.6 Determination of coking value
|
| BS 6043-2-18-2001
| 制铝工业用碳素材料的取样与试验方法.电极用焦炭.用艾氏卡(Eschlca)法测定总硫量
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the total sulfur by the Eschka method - Section 2.18 Determination of total sulfur by the Eschka method
|
| BS 6043-2.20.1-2001
| 制铝工业用碳素材料的取样与试验方法.电极用焦炭.煅烧焦炭的羧基反应性.通过质量损失法测定反应性
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Carboxy reactivity of calcined coke - Determination of the reactivity by a loss in mass method - Section 2.20: Carboxy reactivity of calcined coke Subsection 2.20.1: Determination of the reactivity by a loss in mass method
|
| BS 6043-2.21.1-2001
| 铝生产用碳素材料的取样和试验方法.电极用焦炭.煅烧焦炭的空气反应性.通过灼烧温度测定反应性
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Air reactivity of calcined coke - Determination of the reactivity by determination of ignition temperature - Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by determination of ignition temperature
|
| BS 6043-2.4-2000
| 制铝工业用碳素材料的取样与试验方法.电极用焦炭.X射线荧光光谱法分析
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Analysis by X-ray fluorescence spectroscopy - Section 2.4: Analysis by X-ray fluorescence spectroscopy
|
| BS 6043-2.9-2000
| 制铝工业用碳素材料的取样与试验方法.电极用焦炭.粒度分布的测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution - Section 2.9 Determination of particle size distribution
|
| BS 6043-3.1.1-1999
| 制铝工业用碳素材料的取样与试验方法.电极.取样.阴极取样
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of cathodes - Section 3.1 Sampling Subsection 3.1.1 Sampling of cathodes
|
| BS 6043-3.1.2-1999
| 制铝工业用碳素材料的取样与试验方法.电极.取样.阳极取样
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of anodes - Section 3.1 Sampling Subsection 3.1.2 Sampling of anodes
|
| BS 6043-3.3-2000
| 制铝工业用碳素材料的取样与试验方法.电极.用尺寸法测定阴极碳块和预焙阳极的体密度(表观密度)
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method - Section 3.3 Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
|
| BS 6043-3.4-2000
| 制铝工业用碳素材料的取样与试验方法.电极.用静流法测定阴极碳块和预焙阳极的开口孔隙率和体密度(表观密度)
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes using a hydrostatic method - Section 3.4 Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
|
| BS 6043-3.5.1-2000
| 制铝工业用碳素材料的取样与试验方法.电极.抗弯强度的测定.三点法
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method - Section 3.5 Determination of flexural strength Subsection 3.5.1 Three point method
|
| BS 6043-3.6-2000
| 制铝工业用碳素材料的取样与试验方法.电极.室温下阴极碳块和预焙阳极电阻率的测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature - Section 3.6 Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
|
| BS 6043-3.8.1-2001
| 制铝工业用碳素材料的取样与试验方法.电极用焦炭.预焙阳极的羧基反应性.通过质量损失法测定反应性
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Carboxy reactivity of prebaked anodes - Determination of the reactivity by a loss in mass method - Sec 3.8 Carboxy reactivity of prebaked anodes Subsec 3.8.1 Determination of the reactivity buy a loss in mass method
|
| BS 6043-4.1-2000
| 制铝工业用碳素材料的取样和试验方法.冷压糊料.取样方法
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Methods of sampling - Section 4.1 Methods of sampling
|
| BS 6043-4.10-1991
| 制铝工业用碳素材料的取样和试验方法.第4部分:冷捣糊块.第10节:热捣糊块表观孔隙率测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the apparent porosity of baked rammed paste
|
| BS 6043-4.11-1991
| 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第11节:烘焙捣糊块热膨胀性测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the thermal expansion of baked rammed paste
|
| BS 6043-4.13-1991
| 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第13节:烘焙捣实糊块灰分测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of ash of baked rammed paste
|
| BS 6043-4.2-2000
| 制铝工业用碳素材料的取样和试验方法.冷压糊料.通过喹啉萃取测定有效粘合剂含量和聚焦体含量.聚焦体尺寸分
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution - Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution
|
| BS 6043-4.4-2000
| 制铝工业用碳素材料的取样和试验方法.冷压糊料.未烘烧糊料的挥发物含量的测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the volatile matter content of unbaked paste - Section 4.4 Determination of the volatile matter content of unbaked paste
|
| BS 6043-4.5-1991
| 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第5节:未烘焙糊块含水量测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of water content of unbaked pastes
|
| BS 6043-4.6-1991
| 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第6节:未烘焙糊块最大表观捣实密度测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of maximum rammed apparent density of unbaked paste
|
| BS 6043-4.8-1991
| 制铝工业用碳素材料取样和试验方法.第4部分:冷捣糊块.第8节:烘焙捣实糊块电阻率测定
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of electrical resistivity of baked rammed paste
|
| BS 7S 1-1964
| 飞机材料规范.机械加工用碳素钢光亮冷拔棒材(35/45吨力/平方英寸.最大直径或最小断面尺寸4英寸)
| Specification for aircraft material - Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension)
|
| BS EN 2557-1997
| 碳素纤维预浸织物.单位面积质量测定
| Carbon fibre preimpregnates - Determination of mass per unit area
|
| BS EN 2559-1997
| 碳素纤维预浸织物.树脂成份,纤维成份以及单位面积纤维质量测定
| Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
|
| BS EN 2561-1995
| 碳素纤维增强的塑料.无向的塑料层压制品.平行与纤维方向的抗拉试验
| Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction
|
| BS EN 2562-1997
| 碳素纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验
| Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
|
| BS EN ISO 2566-1-1999
| 钢.伸长值的换算.碳素钢和低合金钢
| Steel - Conversion of elongation values - Carbon and low alloy steels
|
| BS HC 1-1973
| 碳素钢铸件(500牛顿/平方毫米)规范
| Specification for carbon steel castings (500 N/mm2)
|
| BS ISO 12986-2-2005
| 铝生产用碳素材料.预焙阳极和阴极碳块.用四点法测定抗弯强度
| Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method
|
| BS ISO 12989-2-2005
| 铝生产用碳素材料.焙烧阳极和侧壁块.空气反应性的测定.热重分析法
| Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Thermogravimetric method
|
| BS ISO 3575-2005
| 商品级和冲压级连续热镀锌碳素钢薄板
| Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
|
| BS ISO 4999-2006
| 商品级和冲压和结构级连续热镀锡(合金)冷轧碳素薄钢板
| Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| BS ISO 8005-2006
| 铝生产用碳素材料.生焦炭和煅烧焦炭.灰分含量的测定
| Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
|
| BS ISO 8007-3-2005
| 铝生产用碳素材料.单个材料的取样方案和取样.侧壁块
| Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks
|
| BS SP 166-1982
| 航空航天用弹簧限动环规范.碳素钢开口簧环(米制系列)
| Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series)
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com