5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




英国验收标准(BS acceptance standards)翻译目录查询

ASME |  BS |  DIN |  EN |  GB |  IEC |  IEEE |  ISO |  JIS |  NF | 
编号中文名称英文名称
BIP 2064-2004 建筑物规则2000.验收文献B Building Regulations 2000 - Approved Document B
BIP 2065-2003 建筑物规则2000.验收文献M Building Regulations 2000 - Approved Document M
BS 1571-2-1975 容积式压缩机与排气机的试验.第2部分:空气压缩机与排气机的简化验收方法 Specification for testing of positive displacement compressors and exhausters - Methods for simplified acceptance testing for air compressors and exhausters
BS 3135-1989 燃气轮机验收试验规范 Specification for gas turbine acceptance test
BS 3S 500-1996 钢板和钢带检验、试验及验收程序 Procedure for inspection, testing and acceptance of steel sheet and strip
BS 4L 100-1993 锻铝和铝合金的检验、试验和验收程序 Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
BS 4L 101-1990 铝基和镁基铸锭和铸件的检验、试验和验收程序 Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
BS 4T 100-1997 无缝钢管和管材的检验、试验和验收程序 Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
BS 5947-1992 包括验收条件的农用轮式拖拉机保护驾驶室及机架的静负荷试验方法 Method of test for static loading of protective cabs and frames for agricultural wheeled tractors, including acceptance conditions
BS 5964-1-1990 建筑放样和测量.第1部分:测量、计划和组织方法与验收准则 Building setting out and measurement - Methods of measuring, planning and organization and acceptance criteria
BS 5S 100-1993 锻钢制品(钢板、薄钢板、钢带和钢管除外)检验、试验和验收程序 Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
BS 6001-7-2006 计数检验抽样程序.基于控制出厂质量用的信用原则的验收零抽样系统 Acceptance sampling procedures for inspection by attributes - Part 7: Accept-zero sampling system based on credit principle for controlling outgoing quality
BS 6001-9-2002 计数取样检验程序.分批检验时控制出厂质量的以信任为基础的零抽样验收计划 Sampling procedures for inspection by attributes - Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
BS 6065-1981 成型耐火材料制品的取样和验收试验方法 Methods for sampling and acceptance testing of shaped refractory products
BS 6434-1984 BS 6065"成形耐火材料制品取样和验收方法" 使用指南 Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
BS 6587-1985 紧固件的验收检验方法 Method of acceptance inspection for fasteners
BS 7121-2-2003 起重机安全操作实用规程.验收、试验和检查 Code of practice for safe use of cranes - Inspection, testing and examination
BS 7676-2-1993 齿轮验收法规.验收试验期间齿轮机构机械振动的测定 Acceptance code for gears - Determination of mechanical vibrations of gear units during acceptance testing
BS 7783-1994 验收控制图 Acceptance control charts
BS 7910-2005 金属结构裂纹验收评定方法指南 Guide to methods for assessing the acceptability of flaws in metallic structures
BS B 100-1992 锻造铜合金的检测,试验和验收程序 Procedure for inspection, testing and acceptance of wrought copper alloys
BS DD ENV 1317-4-2002 道路路障系统.安全路障的终端和过渡端的性能等级、冲击试验验收标准和试验方法 Road restraint systems - Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
BS DD IEC/TS 62257-6-2006 农村电气化用小型可再生能源和混合系统的推荐.验收、操作、维护和替换 Recommendations for small renewable energy and hybrid systems for rural electrification - Acceptance, operation, maintenance and replacement
BS EN 10222-4-1999 压力容器用钢锻件.具有高验收强度的可焊接细晶粒钢 Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength
BS EN 12266-1-2003 工业用阀门.阀门试验.压力试验、试验规程和验收标准.强制要求 Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements
BS EN 12266-2-2002 工业用阀门.阀门试验.试验、试验规程和验收标准.补充要求 Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
BS EN 12484-4-2002 灌溉技术.自动草坪灌溉系统.设备安装和验收 Irrigation techniques - Automatic turf irrigation systems - Installation and acceptance
BS EN 12517-1-2006 焊缝的无损检验.用放射线照相术评定钢、镍、钛及其合金的焊接接缝.验收等级 Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
BS EN 1289-1998 焊接的无损检验.焊接的超声波探检验.验收等级 Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels
BS EN 1291-1998 焊缝的无损检验.焊缝的磁粉检验.验收等级 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
BS EN 12952-15-2003 水管锅炉和辅助设备.验收试验 Water-tube boilers and auxiliary installations - Acceptance tests
BS EN 12953-11-2003 火管锅炉.验收试验 Shell boilers - Acceptance tests
BS EN 13121-1-2003 地面用玻璃钢槽罐和容器.原材料.技术条件和验收条件 GRP tanks and vessels for use above ground - Raw materials - Specification conditions and acceptance conditions
BS EN 1317-2-1998 道路防护体系.安全栅栏的性能等级、冲击试验、验收标准和试验方法 Road restraint systems - Performance classes, impact test acceptance criteria and test methods for safety barriers
BS EN 1317-3-2000 道路防护系统.防撞缓冲物的性能等级、冲击试验验收标准和试验方法 Road restraint systems - Performance classes, impact test acceptance criteria and test methods for crash cushions
BS EN 13231-1-2006 铁路设施.轨道.作业验收.有碴轨道的作业.平原线 Railway applications - Track - Acceptance of works - Part 1:Works on ballasted track - Plain line
BS EN 13231-2-2006 铁路设施.轨道.作业验收.有碴轨道的作业.道岔和交叉口 Railway applications - Track - Acceptance of works - Part 2:Works on ballasted track - Switches and crossings
BS EN 13231-3-2006 铁路设施.轨道.作业验收.钢轨打磨、铣削和轨道计划作业验收 Railway applications - Track - Acceptance of works - Part 3:Acceptance of rail grinding, milling and planing works in track
BS EN 13432-2000 包装.通过合成及生物降解规定包装可回收性的求.试验计划和包装最终验收评定标准 Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
BS EN 13741-2003 机械通风系列湿式冷却塔的热性能验收试验 Thermal performance acceptance testing of mechanical draught series wet cooling towers
BS EN 1395-1996 热喷涂.热喷涂设备的验收检验 Thermal spraying - Acceptance inspection of thermal spraying equipment
BS EN 13975-2003 体外诊断用医疗装置的验收试验用取样规程.统计特性 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects
BS EN 13979-1-2004 铁路设施.轮副和转向架.整轮.技术验收程序.锻制和轧制轮 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval - Forged and rolled wheels
BS EN 14343-2005 旋转容积泵.验收性能试验 Rotary positive displacement pumps — Performance tests for acceptance
BS EN 14363-2005 铁路设施.铁路车辆运行特性的验收试验.运行性能试验和稳定性试验 Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests
BS EN 14584-2005 无损检验.声学辐射.验收试验过程中金属压力设备的检查.AE源的平面位置 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
BS EN 14612-2004 航天产品保险.自动机械波焊的检定和验收 Space product assurance - Verification and approval of automatic machine wave soldering
BS EN 1610-1998 排水管和下水道的施工和验收 Construction and testing of drains and sewers
BS EN 168100-1995 电子元器件质量评定协调体系.石英晶体器件的分规范.(性能验收) Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (capability approval)
BS EN 1712-1997 焊接无损检验.焊点超声检测.验收水平 Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
BS EN 28206-1992 氧气切割机的验收试验.可重复准确度.操作特性 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
BS EN 60041-1995 水轮机,现场验收试验测定蓄水泵和涡轮泵液压性能 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
BS EN 60193-1999 水轮机、蓄水泵和泵轮机.模型验收试验 Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests
BS EN 60383-1-1998 标称电压1000V以上的架空线用绝缘子.交流系统用陶瓷或玻璃绝缘子装置.定义、试验方法和验收准则 Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
BS EN 60383-2-1995 标称电压高于1000V的架空线路用绝缘子.第2部分:交流电路系统绝缘子串和绝缘子装置.定义、试验方法和验收标 Insulators for overhead lines with a nominal voltage above 1000 V. Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
BS EN 60514-1995 2级交流电度表验收检验 Acceptance inspection of class 2 alternating-current watthour meters
BS EN 60747-16-10-2004 半导体器件.单片微波集成电路的技术验收程序(TAS) Semiconductor devices - Technology Approval Schedule (TAS) for monolithic microwave integrated circuits
BS EN 60953-1-1996 汽轮机热验收试验规程.大型冷凝汽轮机的高精度规范 Rules for steam turbine thermal acceptance tests - High accuracy for large condensing steam turbines
BS EN 60953-3-2002 汽轮机热力验收试验规则.改装的汽轮机的热性能验证试验 Rules for steam turbine thermal acceptance tests - Thermal performance verification tests of retrofitted steam turbines
BS EN 61064-1993 汽轮机速度控制系统验收试验指南 Guide to acceptance tests for steam turbine speed control systems
BS EN 61223-3-1-1999 医疗成像部门的评定及常规试验.验收试验.辐射照相和辐射显微照相系统用X射线设备的成像性能 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for radiographic and radiscopic systems
BS EN 61223-3-3-1997 医用成像部门常规试验评定.验收检验.数字减法血管造影术(DSA)用X射线成像性能 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiograp
BS EN 61223-3-4-2000 医疗成像部门的评定及常规试验.验收试验.牙科X射线设备成像性能 Evaluation and routine testing in medical imaging departments - Acceptance tests
BS EN 61223-3-5-2004 医疗成像部门的评价及常规试验.验收试验.计算机断层摄影X射线设备的成像性能 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of computed tomography X-ray equipment
BS EN 61325-1996 标称电压高于1000V以上高架线的绝缘.直流装置陶瓷或玻璃绝缘件.定义,试验方法和验收规则 Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems - Definitions, test methods and acceptance criteria
BS EN 61358-1996 电力系统(1和2类)用直接连接的交流电流静态瓦特表的验收检验 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN 818-1-1996 提升用的短节链条.安全性.一般验收条件 Short link chain for lifting purposes - Safety - General conditions of acceptance
BS EN ISO 1-2002 产品几何量技术规范(GPS).产品几何量技术规范和验收的标准温度 Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification
BS EN ISO 10360-1-2001 产品几何量规范(GPS).坐标测量机(CMM)的验收和复检试验.词汇 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Vocabulary
BS EN ISO 10360-2-2002 产品几何量技术规范(GPS).坐标式测量机(CMM)的验收和再验证试验.测量尺寸用坐标式测量机 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring size
BS EN ISO 10360-3-2001 产品几何量规范(GPS).坐标测量机(CMM)的验收和复检试验.旋转台的轴线作为第四条轴线的坐标测量机 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs with the axis of the rotary table as the fourth axis
BS EN ISO 10360-4-2001 产品几何量规范(GPS).坐标测量机(CMM)的验收和复检试验.用于扫描测量模式的坐标测量机 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used in scanning measuring mode
BS EN ISO 10360-5-2001 产品几何量规范(GPS).坐标式测量设备(CMM)的验收和复检试验.带多触针探测系统的坐标测量机 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs using multiple stylus probing systems
BS EN ISO 10360-6-2002 产品几何量技术规范(GPS).坐标测量机(CMM)的验收和复验试验.计算高斯相关特性误差的估计 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features
BS EN ISO 10545-1-1997 瓷砖.抽样和验收依据 Ceramic tiles - Sampling and basis for acceptance
BS EN ISO 11546-2-1996 声学.隔音罩隔声性能的测定.现场测定(验收和鉴定用) Acoustics - Determination of sound insulation performances of enclosures - Measurements in situ (for acceptance and verification purposes)
BS EN ISO 14744-1-2001 焊接.电子束焊接机的验收检验.原理和验收条件 Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions
BS EN ISO 14744-2-2001 焊接.电子束焊接机的验收检验.加速电压特性测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of accelerating voltage characteristics
BS EN ISO 14744-3-2001 焊接.电子束焊接机的验收检验.电子束电流特性的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of beam current characteristics
BS EN ISO 14744-4-2001 焊接.电子束焊接机的验收检验.焊接速度的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of welding speed
BS EN ISO 14744-5-2001 焊接.电子束焊接机的验收检验.偏转精度的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of run-out accuracy
BS EN ISO 14744-6-2001 焊接.电子束焊接机的验收检验.电焊位置稳定性的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of stability of spot position
BS EN ISO 14982-1998 农业和林业机械.电磁兼容性.试验方法和验收标准 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
BS EN ISO 15616-1-2003 高质量焊接和切割用CO2激光束机的验收试验.通用原则和验收条件 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
BS EN ISO 15616-2-2003 高质量焊接和切割用CO2激光束机的验收试验.静态和动态精确度的测定 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
BS EN ISO 15616-3-2003 高质量焊接和切割用CO2激光束机的验收试验.气体流量和压力测量仪的校正 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
BS EN ISO 22827-1-2006 Nd:YAG激光束焊接机器的验收试验.带光纤送的机器.激光装配 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
BS EN ISO 22827-2-2006 Nd:YAG激光束焊接机器的验收试验.带光纤传送的机器.移动机理 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
BS EN ISO 3269-2001 紧固件.验收检验 Fasteners - Acceptance inspection
BS EN ISO 5674-2004 农林用拖拉机和机械.动力输出轴护罩(PTO).强度和磨损试验及验收标准 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria
BS EN ISO 9906-2000 涡轮式泵.液压性能验收试验.1和2级 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
BS ISO 10099-2001 气压液动.气液缸.最终检验和验收标准 Pneumatic fluid power - Cylinders - Final examination and acceptance criteria
BS ISO 10100-2001 液压传动.液压缸.验收试验 Hydraulic fluid power - Cylinders - Acceptance tests
BS ISO 10425-2003 石油和天然气工业用钢丝绳.最低要求和验收条件 Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
BS ISO 10725-2001 散装材料检验的验收取样计划和程序 Acceptance sampling plans and procedures for the inspection of bulk materials
BS ISO 1217-1997 位移式压缩机.验收试验 Displacement compressors - Acceptance tests
BS ISO 13448-1-2005 基于优先分配原则的验收取样规程(APP).APP法指南 Acceptance sampling procedures based on the allocation of priorities principle (APP) - Guidelines for the APP approach
BS ISO 13448-2-2004 基于优先分配原则(APP)的验收抽样过程.按照属性验收抽样用协调单个抽样计划 Acceptance sampling procedures based on the allocation of priorities principles (APP) - Coordinated single sampling plans for acceptance sampling by attributes
BS ISO 14560-2004 根据属性验收抽样程序.每百万非合格样品中规定的质量等级 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
BS ISO 15394-2000 包装.航运、运输和验收标签的两维符号和条形码 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
BS ISO 17101-2004 农用机械.转式和甩刀式割草机.抛掷物体试验和验收标准 Agricultural machinery - Rotary and flail mowers - Thrown-object test and acceptance criteria
BS ISO 1834-1999 起重用短环链.验收总则 Short link chain for lifting purposes - General conditions of acceptance
BS ISO 1986-1-2001 卧轴矩台平面磨床的验收条件.精度检验.工作台长度达到1600mm的机床 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm
BS ISO 21247-2005 产品验收用组合验收零取样系统和过程控制程序 Combined accept-zero sampling systems and process control procedures for product acceptance
BS ISO 23079-2005 镁和镁合金.回炉料.要求、分类和验收 Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
BS ISO 3070-3-1999 卧式镗铣床的验收条件.精度试验.第3部分:带独立固定工作台的落地式机床 Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Floor type machines with detached, stationary work-holding table
BS ISO 3070-4-1999 卧式镗铣床的验收条件.精度试验.第4部分:可移动床身的多刀刨床 Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Planer type machines with movable column
BS ISO 3601-3-2005 液压流体动力.O型环.质量验收标准 Fluid power systems - O-rings - Quality acceptance criteria
BS ISO 4094-2005 纸、纸板和纸浆.试验仪器的国际间校准.标准化和授权实验室的验收和任命 Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories
BS ISO 4703-2001 双柱式平面磨床的验收条件.导轨磨床.精度试验 Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy
BS ISO 8579-1-2002 齿轮装置验收规程.空气中噪声试验规程 Acceptance code for gear units - Test code for airborne sound
DD ENV 1317-4-2002 道路减震系统.安全屏障的接线端与过渡配件的性能等级、 冲击试验验收标准和试验方法 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
DD ENV 1402-3-1999 不定型耐火产品.验收特性 Unshaped refractory products. Characterization as received
PD CR 13909-2002 识别卡系统.部门间用柔性薄卡.验收准则 Identification card systems. Intersector thin flexible cards. Acceptance criteria
编号中文名称英文名称

返回