5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




英国泵标准(BS pump standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
BS 3766-1978 机床用冷却液泵规范 Specification for coolant pumps for machine tools
BS 4082-1-1969 立式管线离心泵外部尺寸规范.第1部分:"I"型 Specification for external dimensions for vertical in-line centrifugal pumps - 'I' Type
BS 4082-2-1969 立式管线离心泵外部尺寸规范.第2部分:"U"型 Specification for external dimensions for vertical in-line centrifugal pumps - 'U' Type
BS 4617-1983 液压流体动力传输用动力泵和电动机性能的测定方法 Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
BS 5173-102.3-1988 橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第3节:燃料分配泵软管体积膨胀测定 Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses
BS 5257-1975 卧式端吸离心泵(16bar)规范 Specification for horizontal end-suction centrifugal pumps (16 bar)
BS 5860-1980 水轮机、蓄水泵及涡轮泵的效率测定方法(热力学法) Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method)
BS 5944-1-1992 液压动力系统和部件气动噪声测量.第1部分:液压泵试验方法 Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps
BS 5944-5-1985 液压系统和部件气动噪音测量.第5部分:使消声室测定液压泵声功率等级的简易方法 Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber
BS 5944-6-1992 液压动力系统和部件气动噪声测量.第6部分:平行六面体传声器阵列测试液压泵噪声 Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array
BS 6169-1-1981 液态烃类体积测量方法.第1部分:置换流量计系统(不包括配剂泵) Methods for volumetric measurement of liquid hydrocarbons - Displacement meter systems (other than dispensing pumps)
BS 6907-4-1988 露天矿和采石场的电气装置.第4部分:开采、层叠和处理机械设备、泵和低信号级及通信系统推荐标准 Electrical installations for open-cast mines and quarries - Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems
BS 7117-2-1991 安装在加油站并用以加液体燃料的计量泵和分配器.安装指南 Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to installation
BS 7117-3-1991 安装在加油站并用以加液体燃料的计量泵和分配器.安装后维护指南 Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to maintenance after installation
BS 7250-1989 液压传动正排量泵和电动机导出量的测定方法 Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
BS 7929-1999 泵铸造设计程序鉴定指南 Guide for the verification of a pump casing design procedure
BS 799-7-1988 燃油设备.第7部分:有旋转轴和外部传动装置的雾化燃油器泵的尺寸规范 Oil burning equipment - Specification for dimensions of atomizing oil burner pumps with rotating shaft and external drive
BS 8204-7-2003 找平层、底基和现场铺筑地板材料.可泵送自找平找平层.实施规范 Screeds, bases and in-situ floorings - Pumpable self-smoothing screeds - Code of practice
BS DD CEN/TS 14825-2004 对流式供暖和制冷用带有电动压缩机的空气调节器、液体制冷包和热泵.部分负载条件下的检验和额定 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating at part load conditions
BS DD ENV 12102-1997 带电驱动压缩机的空调、加热泵和除湿器.空气噪声的测量.声功率水平的测定 Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level
BS DD IEC TS 62091-2003 低压开关设备和控制设备.固定式消防泵驱动器用控制器 Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps
BS EN 1012-1-1997 压缩机和真空泵.安全性要求.压缩机 Compressors and vacuum pumps - Safety requirements - Compressors
BS EN 1012-2-1997 压缩机和真空泵.安全性要求.真空泵 Compressors and vacuum pumps - Safety requirements - Vacuum pumps
BS EN 1028-1-2002 消防泵.起动注油器的消防离心泵.分类.总则和安全性要求 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Classification - General and safety requirements
BS EN 1028-2-2002 消防泵.带起动油泵的消防离心泵.一般要求和安全性要求的验证 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Verification of general and safety requirements
BS EN 1076-1997 工作地点的环境.测定气体和蒸气用的泵吸附管.要求和试验方法 Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods
BS EN 12157-1999 离心泵.机床用冷却液泵装置.公称流动速率、尺寸 Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions
BS EN 12162-2001 液体泵.安全要求.液压静态试验程序 Liquid pumps - Safety requirements - Procedure for hydrostatic testing
BS EN 12178-2003 制冷系统和热泵.液位指示设备.要求、试验和标记 Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
BS EN 12262-1999 旋转动力泵.技术文献.术语,交付范围,布局 Rotodynamic pumps - Technical documents - Terms, delivery range, layout
BS EN 12263-1999 制冷系统和热力泵.限压安全开关装置.要求和试验 Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
BS EN 12284-2003 冷却系统和加热泵.阀.要求、试验及标记 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
BS EN 12309-1-2000 净热输入不超过70KW的燃气吸收和吸收空气调节式和/或热力泵装置 Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Safety
BS EN 12309-2-2000 净热输入不超过70KW的燃气吸收和吸收空气调节式和/或热力泵装置.能量的合理使用 Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Rational use of energy
BS EN 1232-1997 工作场所环境.化学试剂的小型专用抽样泵.要求和试验方法 Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods
BS EN 12462-1998 生物技术.泵性能准则 Biotechnology - Performance criteria for pumps
BS EN 12483-1999 液泵.带变频机的泵装置.担保和兼容性试验 Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
BS EN 12514-1-2000 油燃烧器供油系统的安装.安全性要求和试验.零部件、供油泵、控制和安全装置、供油罐 Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks
BS EN 12583-2000 供气系统.压缩机泵站.功能要求 Gas supply systems - Compressor stations - Functional requirements
BS EN 12639-2000 液压泵和泵组.噪音测试规程.2级和3级精度 Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
BS EN 12723-2000 液压泵.泵和设备的通用术语.定义、数量、字母符号和单位 Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units
BS EN 12919-1999 工作场所空气.体积流速大于51/min的化学试剂取样用泵.要求和试验方法 Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 51/min - Requirements and test methods
BS EN 13136-2001 灭火系统和热力泵.释压装置和配套管道.计算方法 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
BS EN 13275-2000 低温容器.低温设备用泵 Cryogenic vessels - Pumps for cryogenic service
BS EN 13313-2002 制冷系统和加热泵.人员的能力. Refrigerating systems and heat pumps - Competence of personnel
BS EN 13617-1-2004 加油站.计量泵、分配器和遥控泵送装置的性能和建造的安全要求 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 13617-2-2004 加油站.计量泵和配油器上安全制动器的建造和性能的安全要求 Petrol filling stations - Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
BS EN 13617-4-2004 加油站.计量泵和配油器用转环的建造和性能的安全与环境要求 Petrol filling stations - Safety and environmental requirements for construction and performance of swivels for use on metering pumps and dispensers
BS EN 13951-2003 液泵.安全要求.农产食品设备.使用中卫生保证的设计原则 Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use
BS EN 14275-2003 车用燃料.汽油及柴油质量的评估.零售点油泵及商业点燃料自动售货机的抽样 Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
BS EN 14343-2005 旋转容积泵.验收性能试验 Rotary positive displacement pumps — Performance tests for acceptance
BS EN 14466-2005 消防泵.便携式消防泵.安全和性能要求、试验 Fire fighting pumps - Portable pumps - Safety and performance requirements, tests
BS EN 14511-1-2004 房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.术语和定义 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling
BS EN 14511-2-2004 房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.试验条件 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Test conditions
BS EN 14511-3-2004 房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.试验方法 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Test methods
BS EN 14511-4-2004 房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.要求 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Requirements
BS EN 14662-1-2005 环境空气质量.测量苯浓度的标准方法.热解吸和气相色谱法后的泵取样 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-2-2005 环境空气质量.苯浓度测量的标准方法.溶剂解吸和气相色谱法后的泵送取样 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-3-2005 环境空气质量.测量苯浓度的标准方法.自动泵取样和现场气相色谱法 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS EN 14710-1-2005 消防泵.无起动注油器的消防离心泵.分类、一般要求和安全要求 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Classification, general and safety requirements
BS EN 14710-2-2005 消防泵.无起动注油器的消防离心泵.一般要求和安全要求的验证 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Verification of general and safety requirements
BS EN 1736-2000 制冷系统和热力泵.柔性管元件.振动隔绝器和膨胀节.要求,设计和安装 Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation
BS EN 1861-1998 制冷系统和热力泵.系统流量图,管道和设备图.布局和符号 Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols
BS EN 1947-2002 消防软水管.消防泵和车用半刚性输送软水管和水管组件 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
BS EN 22858-1993 端吸式离心泵(额定压力16巴).命名、标称效率点和尺寸 End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions
BS EN 23661-1993 端吸式离心泵的底板和安装尺寸 End-suction centrifugal pumps - Baseplate and installation dimensions
BS EN 255-3-1997 带电动压缩机的空调器.液体制冷设备和热力泵.加热方式.卫生间热水装置的试验和标记要求 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Testing and requirements for marking for sanitary hot water units
BS EN 378-1-2000 制冷系统和加热泵规范.安全性和环境要求.基本要求、定义、分类和选择规范 Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Basic requirements, definitions, classification and selection criteria
BS EN 378-2-2000 制冷系统和加热泵规范.安全性和环境要求.设计、制造、试验、标记和文献 Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Design, construction, testing, marking and documentation
BS EN 378-3-2000 制冷系统和加热泵规范.安全性和环境要求.安装现场和人员保护 Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Installation site and personal protection
BS EN 378-4-2000 制冷系统和加热泵规范.安全性和环境要求.操作、维修、检修和回收 Refrigerating systems and heat pumps - Safety and environmental requirements - Operation, maintenance, repair and recovery
BS EN 45510-5-4-1998 发电站设备采购指南.水轮机、蓄水泵和水泵水轮机 Guide for the procurement of power station equipment - Hydraulic turbines, storage pumps and pump-turbines
BS EN 45510-6-4-2000 发电站设备采购指南.涡轮机辅助设备.泵 Guide for the procurement of power station equipment - Turbine auxiliaries - Pumps - Pumps
BS EN 50216-7-2002 电力变压器和反应堆配件.运输油用电泵 Power transformers and reactor fittings - Electric pumps for transformer oil
BS EN 60041-1995 水轮机,现场验收试验测定蓄水泵和涡轮泵液压性能 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
BS EN 60193-1999 水轮机、蓄水泵和泵轮机.模型验收试验 Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests
BS EN 60335-2-40-2003 家用和类似用途电器的安全规范.特殊要求.电热泵、空气调节器和去湿器 Household and similar electrical appliances - Safety - Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
BS EN 60335-2-41-2003 家用和类似用途电器.泵的特殊要求 Household and similar electrical appliances - Particular requirements for pumps
BS EN 60335-2-51-2003 家用和类似用途电器的安全.加热和供水设施用固定式循环泵的特殊要求 Specification for safety of household and similar electrical appliances - Particular requirements for stationary circulation pumps for heating and service water installations
BS EN 60601-2-24-1998 医疗电气设备.特殊安全要求.输液泵和控制器的特殊安全要求. Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of infusion pumps and controllers
BS EN 60609-1-2005 水轮机、蓄能泵和水泵水轮机.气蚀损坏的评定.反击式水轮机、蓄能泵和水泵水轮机的评定 Hydraulic turbines, storage pumps and pump-turbines - Caviatation pitting evaltuation - Evalution in reaction turbines, storage pumps and pumps-turbines
BS EN 60609-2-1998 水轮机、蓄能泵和水泵水轮机气蚀损坏的评定.水斗式水轮机的评定 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines
BS EN 60994-1993 水力机械(水轮机、蓄水泵和水轮泵)振动和脉动现场测量指南 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
BS EN 61290-6-1-1998 光纤放大器.基本规范.泵漏参数测试方法.光信号分离器 Optical fibre amplifiers - Basic specification - Test methods for pump leakage parameters - Optical demultiplexer
BS EN 61702-2000 直接耦合光伏(PV)水泵系统的额定值 Rating of direct coupled photovoltaic (PV) pumping systems
BS EN 733-1995 带支承架的额定值为10bar的端吸式离心泵.公称负荷点、主要尺寸和命名系统 End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system
BS EN 734-1995 侧槽泵PN40.公称负荷点、主要尺寸和命名系统 Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system
BS EN 735-1995 旋转动态泵的总体尺寸.公差 Overall dimensions of rotodynamic pumps - Tolerances
BS EN 752-6-1998 室外建筑物的排水和污水系统.泵抽排装置 Drain and sewer systems outside buildings - Pumping installations
BS EN 809-1998 液体用泵和泵装置.一般安全性要求 Pumps and pump units for liquids - Common safety requirements
BS EN ISO 13709-2003 石油、石化和天然气工业用离心泵 Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 13710-2004 石油、石化和天然气工业.往复式变容真空泵 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
BS EN ISO 14847-1999 回转容积泵.技术要求 Rotary positive displacement pumps - Technical requirements
BS EN ISO 15136-1-2001 石油和天然气工业的钻孔设备.人工提升用步进式空腔泵系统.泵 Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps
BS EN ISO 15783-2003 无密封旋转动力泵.II级.规范 Seal-less rotodynamic pumps - Class II - Specification
BS EN ISO 16330-2003 往复式正排量泵和泵装置.技术要求 Reciprocating positive displacement pumps and pump units - Technical requirements
BS EN ISO 20763-2004 石油和相关产品.液压液耐磨性的测定.叶轮泵法 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
BS EN ISO 21049-2005 泵.离心泵和旋转泵用轴封系统 Pumps - Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 2151-2004 声学.压缩机和真空泵的噪声试验规范.工程法(2级) Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)
BS EN ISO 5198-1999 离心式混流轴向泵.液压性能试验规程.精密级 Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class
BS EN ISO 5199-2002 离心泵的技术规范.2级 Technical specifications for centrifugal pumps - Class II
BS EN ISO 7886-2-1996 一次性使用无菌皮下注射器.动力驱动注射器泵的注射器 Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps
BS EN ISO 8849-2003 小艇.电动直流舱底泵 Small craft - Electrically operated direct-current bilge-pumps
BS EN ISO 9905-1994 离心泵技术规范.I类 Technical specifications for centrifugal pumps - Class I
BS EN ISO 9906-2000 涡轮式泵.液压性能验收试验.1和2级 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
BS EN ISO 9908-1994 离心泵技术规范.III类 Technical specifications for centrifugal pumps - Class III
BS IEC 60609-2-1998 水轮机、蓄能泵和水泵涡轮机空穴评估.水戽式水轮机的评估 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines
BS IEC 61366-1-1998 水轮机、蓄能泵和水泵涡轮.投标文件.综述及附录 Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - General and annexes
BS IEC 61366-2-1998 水轮机、蓄能泵和水泵涡轮.投标文件.弗兰西斯涡轮机技术规范指南 Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Francis turbines
BS IEC 61366-3-1998 水轮机、蓄能泵和水泵涡轮.投标文件.水戽式水轮机的技术规范指南 Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Pelton turbines
BS IEC 61366-4-1998 水轮机、蓄能泵和水泵涡轮.投标文件.卡普兰式水轮机和推进式水轮机的技术规范指南 Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Kaplan and propeller turbines
BS IEC 61366-5-1998 水轮机、蓄能泵和水泵涡轮.投标文件.管状水轮机技术规范指南 Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for tubular turbines
BS IEC 61366-6-1998 水轮机、蓄能泵和水泵涡轮.投标文件.水泵涡轮技术规范指南 Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for pump-turbines
BS IEC 61366-7-1998 水轮机、蓄能泵和水泵涡轮.投标文件.蓄水泵技术规范指南 Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for storage pumps
BS ISO 10767-1-1996 液压流体动力.对系统和部件产生压力波动级的测定.第1部分:泵精度法 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps
BS ISO 10767-2-1999 液压传动.系统和元件中产生压力波动值的测定.泵的简化方法 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps
BS ISO 10816-5-2001 机械振动.在非旋转部件上测量评价机械振动.水力发电厂和泵站机组 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Machine sets in hydraulic power and pumping plants
BS ISO 12334-2000 航空航天.液压的压力补偿的变量输送泵.35000KPa系统的一般要求 Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems
BS ISO 14617-9-2004 图示的图形符号.泵、压缩机和风扇 Graphical symbols for diagrams - Pumps, compressors and fans
BS ISO 14681-1998 柴油发动机.燃料喷射泵试验.燃料喷嘴的校准 Diesel engines - Fuel injection pump testing - Calibrating fuel injectors
BS ISO 14686-2003 液体比重的测定.水井的泵送试验.设计、性能和使用的考虑和指南 Hydrometric determinations - Pumping tests for water wells - Considerations and guidelines for design, performance and use
BS ISO 16902-1-2003 液压传动.用声强法测定声功率级的试验规程.工程法.泵 Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps
BS ISO 17559-2004 液压传动.电控液压泵.性能特征测定的试验方法 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
BS ISO 3019-1-2001 液力传动.容积式泵和马达的安装法兰盘和轴伸的尺寸及标识代码.以米制单位表示的英制系列 Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Inch series shown in metric units
BS ISO 3019-2-2001 液力传动.容积式泵和马达的安装法兰盘和轴伸的尺寸及标识代码.米制系列 Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Metric series
BS ISO 3069-2001 端吸离心泵.机械密封和软密封件密封腔尺寸 End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing
BS ISO 4008-3-2003 道路车辆.喷油泵试验.应用和试验程序 Road vehicles - Fuel injection pump testing - Application and test procedures
BS ISO 4093-2000 柴油发动机.喷油泵.试验用高压管 Diesel engines - Fuel injection pumps - High-pressure pipes for testing
BS ISO 6145-2-2001 气体分析.标定用混合气体的制备.动态容量法.容积计量泵 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps
BS ISO 6519-2004 柴油机.喷油泵.轴端和毂盘的锥度 Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs
BS ISO 7299-1997 柴油发动机.燃油注射泵端面安装法兰盘 Diesel engines - End-mounting flanges for fuel injection pumps
BS ISO 7612-2006 柴油机.共轨燃料喷射系统用基座安装直列式喷油泵和高压供油泵.安装尺寸 Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions
BS ISO 7879-1998 柴油发动机.托架安装直列式燃料喷射泵.安装尺寸 Diesel engines - Cradle mounted in-line fuel injection pumps - Mounting dimensions
BS ISO 7919-5-2005 机械振动.通过对旋转轴的测量评价机械振动.水力发电厂和泵站机组 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Machine sets in hydraulic power generating and pumping plants
BS ISO 8976-2004 夹扭钳和剪切钳.水泵钳.尺寸和试验值 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
BS M 65-1987 压力补偿变量液压泵规范 Specification for pressure compensated variable delivery hydraulic pumps
DD ENV 12102-1997 带电动压缩机的空调器、热力泵和除湿器.机载噪音的测量.噪音等级的测定. Air conditioners, heat pumps and dehumidifiers with electrically driven compressors. Measurement of airborne noise. Determination of the sound power level
KIT 76-2001 制冷系统和热泵.安全和环境规定(BS EN 378) Refrigeration and heat pumps - Safety and environment set (BS EN 378)
编号中文名称英文名称

返回