| 编号 |
中文名称 |
英文名称 |
| BS 1133 Secs.1 to 3-1989
|
包装规程.第1-3节:包装概括介绍
|
Packaging code - Introduction to packaging
|
| BS 1133-10.1-1990
|
包装规程.第10节:金属容器.第1小节:马口铁制听桶和罐
|
Packaging code - Metal containers - Tins and cans
|
| BS 1133-10.2-1991
|
包装规程.第10节:金属容器.第2小节:铁桶
|
Packaging code - Metal containers - Metal drums
|
| BS 1133-15-1991
|
包装规程.第15节:伸缩性捆绑带
|
Packaging code - Tensional strapping
|
| BS 1133-18-1991
|
包装规程.第18节:玻璃包装
|
Packaging code - Packaging in glass
|
| BS 1133-19-1986
|
包装规程.包装中使用的干燥剂
|
Packaging code - Use of desiccants in packaging
|
| BS 1133-1986
|
包装法规.第19节:包装中干燥剂的使用
|
Packaging code. Use of desiccants in packaging
|
| BS 1133-21-1991
|
包装规程.第21节:再生纤维素薄膜,塑料薄膜,铝箔,挠性多层板和金属化材料
|
Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
|
| BS 1133-22-1989
|
包装规程.第22节:塑料容器包装
|
Packaging code - Packaging in plastics containers
|
| BS 1133-7.6-1988
|
包装规程.第7节:纸和纸板包装物、袋和包装箱.第6小节:模压纸浆包装
|
Packaging code - Paper and board wrappers, bags and containers - Moulded pulp packaging
|
| BS 1133-8-1991
|
包装规程.第8节:木箱、木盒和木板条箱
|
Packaging code - Wooden boxes, cases and crates
|
| BS 1262-2002
|
金属包装.有表面涂料用带圆拉环的金属容器.规范
|
Metal packaging - Round lever-lid metal containers for surface coatings - Specification
|
| BS 1489-1972
|
电工用包覆绕组线的包装规范
|
Specification for the packaging of covered winding wires for electrical purposes
|
| BS 1683-1987
|
已加工乳酪包装用铝箔规范
|
Specification for coated aluminium foil for wrapping processed cheese
|
| BS 2548-1986
|
一般包装用刨花规范
|
Specification for wood wool for general packaging purposes
|
| BS 2782-6 Method 643A-1976
|
塑料的试验方法.第6部分:尺寸特性.试验方法643A:收缩包装用薄膜热缩变
|
Methods of testing plastics - Dimensional properties - Shrinkage on heating of film intended for shrink wrapping applications
|
| BS 2837-1988
|
包装箱提升装置用钢铰链与链带组件规范
|
Specification for steel links and strap assemblies for lifting attachments for packing cases
|
| BS 2982-1992
|
带可卸刀片的外科解剖刀的材料和包装规范
|
Specification for materials and packaging of surgical scalpels with detachable blades
|
| BS 3130-1-1989
|
包装术语.总则(包括辅助材料)
|
Glossary of packaging terms - General (including auxiliary materials)
|
| BS 3130-2-1990
|
包装术语.第2部分:纸与纸板包装
|
Glossary of packaging terms - Paper and board packaging
|
| BS 3130-5-1994
|
包装术语.第5部分:塑料和软包装(不包括纸包装)
|
Glossary of packaging terms - Plastics and flexible packaging (excluding paper)
|
| BS 3130-6-1981
|
包装术语.第6部分:木包装
|
Glossary of packaging terms - Wooden packaging
|
| BS 3177-1959
|
包装用柔性薄片材料的水蒸汽渗透性的测定方法
|
Method for determining the permeability to water vapour of flexible sheet materials used for packaging
|
| BS 3755-1964
|
食品包装材料气味评定的试验方法
|
Methods of test for the assessment of odour from packaging materials used for foodstuffs
|
| BS 3895-1976
|
放射性物质安全运输包装的设计、试验及使用指南
|
Guide to the design, testing and use of packaging for the safe transport of radioactive materials
|
| BS 3F 69-1979
|
硫化橡胶产品包装和识别标志规范
|
Specification for packaging and identification of vulcanized rubber items
|
| BS 4361-15-1988
|
木工机械.第15部分:单板包装边缘剪切机规范
|
Woodworking machines - Specification for veneer pack edge shears
|
| BS 4672-1-1971
|
包装件运输和储存危害指南.第1部分:气候性危害
|
Guide to hazards in the transport and storage of packages - Climatic hazards
|
| BS 4672-2-1971
|
包装件运输和储存危害指南.第2部分:气候性危害(地图与图表)
|
Guide to hazards in the transport and storage of packages - Climatic hazards (maps and diagrams)
|
| BS 4879-1973
|
冰淇淋与冷冻糖果包装用上腊纸板规范
|
Specification for waxed board for packaging ice cream and frozen confectionery |
| BS 5167-1978
|
洗衣粉和清洁剂包装.纤维板盒及筒尺寸和容积
|
Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibreboard
|
| BS 5771-1981
|
预装食品的包装规范.玻璃和金属容器的容量
|
Specification for packages for certain pre-packed foodstuffs: capacities of glass and metal containers
|
| BS 5N 100-7-2002
|
飞行器氧气系统和设备.标签与包装品的清洁处理指南
|
Aircraft oxygen systems and equipment - Guide to cleaning labelling and packaging
|
| BS 6455-1984
|
挠性包装材料溶剂残留成分监测方法
|
Method for monitoring the levels of residual solvents in flexible packaging materials
|
| BS 6720-1986
|
发行包装用运输标志规范
|
Specification for marking transit information on packages for distribution
|
| BS 6788-2-1990
|
神经外科植入物.第2部分:可植入式神经刺激器的标志和包装规范
|
Neurosurgical implants - Specification for marking and packaging of implantable neural stimulators
|
| BS 6837-1987
|
与1200mmｘ1000mm、1200mmｘ800mm托盘和成组载荷模数有关的刚性长方形运输包装的平面尺寸规范
|
Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads
|
| BS 6988-1989
|
用于盘碟包装材料的热压带粘合力的测定方法
|
Method for determination of the adhesion of autoclave tape to tray wrap material
|
| BS 7539-1992
|
包装设计用减震材料性能测定试验方法
|
Methods for test for determination of properties of cushioning materials for package design purposes
|
| BS 7948-1-1997
|
包装橡胶包用薄膜.不可剥拆的高熔点薄膜
|
Films for wrapping rubber bales - Non-strippable high melting point films
|
| BS 8404-2001
|
包装.防止儿童打开的包装.药品用不可再封装包装的要求和检验程序
|
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for pharmaceutical products
|
| BS 984-1990
|
编织与地毯用纱零售包装净重的测定方法
|
Method for determination of net mass of retail packages of knitting and rug yarns
|
| BS DD 264-2007
|
包装.医学产品用盲文和其他型式
|
Packaging - Braille and other formats for medicinal products
|
| BS DD CEN/TS 14014-2006
|
邮政服务.混合邮件.用户－业务员文件形式定义.自动邮政处理的信件包装的XML定义
|
Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling
|
| BS DD CEN/TS 14631-2005
|
邮政服务.容器和包装物的自动识别.容器的资产编号
|
Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering
|
| BS EN 10333-2005
|
包装用钢.与人和动物消费用食品、产品或饮料接触的扁钢制品.镀锡钢(马口铁)
|
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Tin coated steel (tinplate)
|
| BS EN 10334-2005
|
包装用钢.与人和动物消费用食品、产品或饮料接触的扁平钢制品.非镀层钢(黑钢板)
|
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)
|
| BS EN 10335-2005
|
包装用钢.与人和动物消费用食品、产品或饮料接触的扁平钢制品.非合金电解铬/氧化铬镀钢
|
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
|
| BS EN 1086-1996
|
食品运输用口袋.口袋类型和与包装有关的内衬袋的选择推荐规范
|
Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed
|
| BS EN 12246-1999
|
货盘和包装用木材的质量分类
|
Quality classification of timber used in pallets and packaging
|
| BS EN 12248-1999
|
工业包装用的锯材.允许偏差和最佳尺寸
|
Sawn timber used in industrial packaging - Permitted deviations and preferential sizes
|
| BS EN 12374-1998
|
包装.软管.术语
|
Packaging - Flexible tubes - Terminology
|
| BS EN 12375-1998
|
包装.软铝管.壁厚度测定方法
|
Packaging - Flexible aluminium tubes - Wall thickness determination method
|
| BS EN 12377-1999
|
包装材料.软管.封装气密性试验方法
|
Packaging - Flexible tubes - Test method for the airtightness of closures
|
| BS EN 12546-3-2000
|
与食品接触的材料和器具.家用保温容器.热包装材料规范
|
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for thermal packs
|
| BS EN 12566-3-2005
|
＜50 PT的小型废水处理系统.第3部分:包装的和/或现场组装的家用废水处理设备
|
Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants
|
| BS EN 12702-2000
|
包装和一次性卫生用品用纸和纸板用胶粘剂.潜在胶粘层阻隔测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers
|
| BS EN 12703-1999
|
纸,纸板,包装和一次性卫生产品用胶粘剂.低温柔韧性和冻裂温度的测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
|
| BS EN 12704-2000
|
纸,纸板,包装和一次性卫生产品用胶粘剂.含水胶粘剂泡沫形成测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives
|
| BS EN 12726-2000
|
包装.口径为18.5mm的瓶口用软木塞和锥度明显的瓶塞
|
Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
|
| BS EN 12960-2001
|
纸,纸板,包装和一次性卫生用品用胶粘剂.剪切强度测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
|
| BS EN 13010-2003
|
包装.单件包装.标记板显示的尺寸和要求
|
Packaging - Unit packaging - Dimensions and requirements for pegboard display
|
| BS EN 13025-1-2005
|
包装.轻型金属包装箱.第1部分:容积最大不超过40000ml的圆形、柱形和锥形通用金属容器标称填充体积
|
Packaging — Light gauge metal containers — Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
|
| BS EN 13025-2-2005
|
包装.轻型金属容器.20000ml、25000ml和30000ml标称容量不可移动盖(活盖)圆钢和马口铁容器
|
Packaging — Light gauge metal containers — Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
|
| BS EN 13025-3-2005
|
包装.轻型金属容器.20000ml、25000ml和30000ml标称容量可移动盖(活盖)圆钢和马口铁容器
|
Packaging — Light gauge metal containers — Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
|
| BS EN 13026-2001
|
包装.轻型金属包装.一般用途的非圆形,圆柱形,锥形容积达30000ml的金属容器的标称填充容积
|
Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
|
| BS EN 13027-2001
|
包装.轻型金属包装.由标称容量限定的圆形敞口容器
|
Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
|
| BS EN 13028-2001
|
包装.轻型金属包装.由标称容量限定的有或无填充气体的圆形敞口容器
|
Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes
|
| BS EN 13029-2001
|
包装.轻型金属包装.塞塑料封闭物的缝隙
|
Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
|
| BS EN 13045-2000
|
包装.圆柱形塑料软管.尺寸和公差
|
Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
|
| BS EN 13046-2000
|
包装.圆柱形金属软管.尺寸和公差
|
Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances
|
| BS EN 13047-2000
|
包装.锥形金属软管.尺寸和公差
|
Packaging - Flexible conical metallic tubes - Dimensions and tolerances
|
| BS EN 13048-2000
|
包装.铝软管.内部清漆膜厚度测量方法
|
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
|
| BS EN 13054-2001
|
包装.完全填充运输包装.包裹重心测定方法
|
Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package
|
| BS EN 13117-1-2000
|
运输包装.可重复使用的刚性塑料配送箱.通用配送箱
|
Transport packaging - Reusable, rigid plastics distribution boxes - General purpose application
|
| BS EN 13117-2-2000
|
运输包装.可重复使用的刚性塑料配送箱.通用试验规范
|
Transport packaging - Reusable, rigid plastics distribution boxes - General specifications for testing
|
| BS EN 13193-2000
|
包装.包装和环境.术语
|
Packaging - Packaging and the environment - Terminology
|
| BS EN 13199-1-2000
|
包装.低负荷载运系统.通用要求和试验方法
|
Packaging - Small load carrier systems - Common requirements and test methods
|
| BS EN 13199-2-2000
|
包装.低负荷载运系统.柱形叠架制(CSS)
|
Packaging - Small load carrier systems - Column Stackable System (CSS)
|
| BS EN 13199-3-2000
|
包装.低负荷载运系统.联结式叠架制(BSS)
|
Packaging - Small load carrier systems - Bond Stackable System (BSS)
|
| BS EN 13246-2001
|
包装.捆扎钢带规范
|
Packaging - Specification for tensional steel strapping
|
| BS EN 13393-2001
|
包装.边缘保护器的规范
|
Packaging - Specification for edge protectors
|
| BS EN 13394-2001
|
包装.非金属拉伸带材规范
|
Packaging - Specification for non-metallic tensional strapping
|
| BS EN 13427-2004
|
包装.包装和包装废弃物欧洲标准的使用要求
|
Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste
|
| BS EN 13428-2004
|
包装.生产和组成的特殊要求.资源减少的预防
|
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
|
| BS EN 13429-2004
|
包装.重复使用
|
Packaging - Reuse
|
| BS EN 13430-2004
|
包装.通过材料再循环评定包装可回收性的要求
|
Packaging - Requirements for packaging recoverable by material recycling
|
| BS EN 13431-2004
|
包装.以能量恢复的形式评定包装可回收性的要求(包括最小次热值规范)
|
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
|
| BS EN 13432-2000
|
包装.通过合成及生物降解规定包装可回收性的求.试验计划和包装最终验收评定标准
|
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
|
| BS EN 13437-2004
|
包装和材料回收.回收方法的标准.回收过程和流程图的描述
|
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart
|
| BS EN 13439-2004
|
包装.能源回收率.定义和计算方法
|
Packaging - Rate of energy recovery - Definition and method of calculation
|
| BS EN 13440-2004
|
包装.回收率.定义和计算方法
|
Packaging - Rate of recycling - Definition and method of calculation
|
| BS EN 13461-2001
|
包装.圆柱柔性叠层板管道.尺寸和公差
|
Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
|
| BS EN 13538-3-2002
|
睡袋尺寸特性的测定.加载下的容积和易包装性
|
Determination of dimensional characteristics of sleeping bags - Volume under load and easiness of packing
|
| BS EN 13590-2003
|
包装.各种零售货物运输用柔性装载袋.体积和装载量测定的一般特性和试验方法
|
Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
|
| BS EN 13593-2003
|
包装.家用废弃物收集纸袋.类型、要求和试验方法
|
Packaging - Paper sacks for household waste collection - Types, requirements and test methods
|
| BS EN 13626-2003
|
包装.框形货盘.一般要求和试验方法
|
Packaging - Box pallets - General requirements and test methods
|
| BS EN 13628-1-2002
|
包装.软性包装材料.应用静态液体上部气体色谱分析法测定剩余溶质.绝对法
|
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Absolute methods
|
| BS EN 13628-2-2002
|
包装.软性包装材料.应用静态液体上部气相色谱分析法测定残余溶质.工业法
|
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Industrial methods
|
| BS EN 13920-14-2003
|
铝和铝合金.废料.废铝包装件
|
Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings
|
| BS EN 13920-15-2003
|
铝和铝合金.废料.已去除废铝包装件中涂层的铝废料
|
Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings
|
| BS EN 14045-2003
|
包装.在规定了合成条件的实际定向试验中包装材料分解的评定
|
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
|
| BS EN 14046-2003
|
包装.在可控合成条件下包装材料的最大需氧生物降解性和分解的评定.释放的二氧化碳的分析方法
|
Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide
|
| BS EN 14047-2003
|
包装.测定在水介质中包装材料的最终需氧生物降解性.析出二氧化碳分析法
|
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
|
| BS EN 14048-2002
|
包装.测定在水介质中包装材料的最终需氧生物降解性.封闭式呼吸机需氧量测量方法
|
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
|
| BS EN 14053-2004
|
包装.瓦楞或实心纤维纸板制成的包装件.类型和结构
|
Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction
|
| BS EN 14054-2004
|
包装.纸和纸板包装.纸板箱的设计
|
Packaging - Paper and paperboard packaging - Design of cartons
|
| BS EN 14149-2004
|
包装.完全满运输包装件和成组货件.旋转下落的冲击试验
|
Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop
|
| BS EN 14182-2002
|
包装.术语.基本术语和定义
|
Packaging - Terminology - Basic terms and definitions
|
| BS EN 14287-2004
|
铝和铝合金.包装和包装元件制造用产品的化学成分的具体要求
|
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
|
| BS EN 14375-2005
|
保护儿童的不可重封口的药品包装.要求及试验
|
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
|
| BS EN 14391-2004
|
包装.可折叠铝管.触摸式危险警告
|
Packaging - Collapsible aluminium tubes - Tactile warnings of danger
|
| BS EN 14427-2004
|
液化石油气(LPG)用可移动的可再充填式全包装复合气瓶.设计和建造
|
Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases (LPG) - Design and construction
|
| BS EN 14477-2004
|
包装.柔性包装材料.抗击穿性的测定.试验方法
|
Packaging - Flexible packaging material - Determination of puncture resistance - Test methods
|
| BS EN 14479-2004
|
包装.柔性包装材料.用动态液上气相色谱法测定剩余溶剂.绝对法
|
Packaging — Flexible packaging material — Determination of residual solvents by dynamic headspace gas chromatography — Absolute method
|
| BS EN 14713-2005
|
纸和纸板、包装和一次性清洁产品用胶粘剂.可能适合粘结的薄膜的摩擦性能测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding
|
| BS EN 14798-2005
|
玻璃包装.手动冠形开瓶器.尺寸
|
Glass packaging — Hand-held crown bottle openers — Dimensions
|
| BS EN 14806-2005
|
包装.在实验室试验中模拟堆肥条件下初步评价包装材料的分解
|
Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
|
| BS EN 14866-2005
|
釉瓷和搪瓷.空气与气体和气体与气体热交换器用交流换热、上釉和包装的板材.规范
|
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications
|
| BS EN 14867-2005
|
包装.塑料冰冻袋.规范和试验方法
|
Packaging — Plastic freezer bags — Specifications and test methods
|
| BS EN 14887-2005
|
玻璃包装.开启软木塞工具.一般要求
|
Glass packaging — Cork removal devices — General requirements
|
| BS EN 14932-2006
|
塑料.包装袋用伸缩热塑性薄膜.要求和试验方法
|
Plastics — Stretch thermoplastic films for wrapping bales - Requirements and test methods
|
| BS EN 14979-2006
|
包装.柔性塑料/金属叠层管.S13型喷嘴的尺寸公差
|
Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
|
| BS EN 15208-2007
|
危险物品的运输槽罐.密封包装运输系统.工作原理和接口规范
|
Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications
|
| BS EN 15385-2007
|
包装.柔性叠层管.测定头部焊接强度的试验方法
|
Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding
|
| BS EN 1719-1999
|
纸和纸板胶粘剂.包装和一次性用卫生制品.压敏胶粘剂粘着力测定.环行粘着力测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure-sensitive adhesives - Determination of loop tack
|
| BS EN 1720-1999
|
纸和纸板胶粘剂.包装和一次性用卫生制品.压敏胶粘剂粘着力测定.分散性测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability
|
| BS EN 1721-1999
|
纸张和纸板胶粘剂.包装材料和一次性卫生制品.压敏胶粘剂表面粘性测定.滚球法
|
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack
|
| BS EN 1895-2001
|
纸和纸板、包装和一次性卫生产品用胶粘剂.柔性对柔性组装的180°"T"型剥离试验
|
Adhesives for paper and board, packaging and disposable sanitary products - 180 °. "T" peel test for a flexible-to-flexible assembly
|
| BS EN 1896-2001
|
纸和纸板用胶粘剂.包装和一次性卫生用品.拉伸强度和伸长性的测定
|
Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
|
| BS EN 22206-1988
|
整包运输包装件.在试验时各部件的识别方法
|
Complete, filled transport packages - Method for identifying parts when testing
|
| BS EN 22248-1986
|
整包运输包装件.耐垂直跌落碰撞的性能测定方法
|
Complete, filled transport packages - Method for determination of resistance to vertical impact by dropping
|
| BS EN 22872-1993
|
整包运输包装耐压性测定方法
|
Complete, filled transport packages - Method for determination of resistance to compression
|
| BS EN 22874-1986
|
整包运输包装件.压缩试验机用堆放试验方法
|
Complete, filled transport packages - Method of test for stacking using compression tester
|
| BS EN 22876-1986
|
整包运输包装件.耐滚动破坏的性能测定方法
|
Complete, filled transport packages - Method for determination of resistance to damage by rolling
|
| BS EN 24178-1981
|
涉及完整、满载运输包装分发试验信息记录规范
|
Specification for information to be recorded in distribution trials involving complete, filled transport packages
|
| BS EN 26590-1-1993
|
包装袋.第1部分:术语和类型.纸袋
|
Packaging - Sacks - Vocabulary and types - Paper sacks
|
| BS EN 26590-2-1993
|
包装袋.第2部分:术语和类型.热塑性塑料软薄膜袋
|
Packaging - Sacks - Vocabulary and types - Sacks made from thermoplastic flexible film
|
| BS EN 26591-1-1993
|
包装袋.第1部分:测量方法和说明.空纸袋
|
Packaging - Sacks - Description and method of measurement - Empty paper sacks
|
| BS EN 26591-2-1993
|
包装袋.第2部分:测量方法和说明.热塑性塑料软薄膜空袋
|
Packaging - Sacks - Description and method of measurement - Empty sacks made from thermoplastic flexible film
|
| BS EN 26599-1-1993
|
包装袋.检验环境调节.第1部分:纸袋
|
Packaging - Sacks - Conditioning for testing - Paper sacks
|
| BS EN 27023-1993
|
包装袋.检验用空袋取样方法
|
Packaging - Sacks - Method of sampling empty sacks for testing
|
| BS EN 27965-1-1993
|
包装袋.第1部分:跌落试验.纸袋
|
Packaging - Sacks - Drop test - Paper sacks
|
| BS EN 28474-1987
|
满包运输包装件.耐浸水性能测定方法
|
Complete, filled transport packages - Method for determination of resistance to immersion in water
|
| BS EN 28768-1987
|
满包运输包装件.耐颠覆损坏性能测定方法
|
Complete, filled transport packages - Method for determination of resistance to damage by toppling
|
| BS EN 29454-1-1994
|
软钎焊剂.分类和要求.分类、标签和包装
|
Soft soldering fluxes - Classification and requirements - Classification, labelling and packaging
|
| BS EN 365-2004
|
预防高空坠落的个人保护设备.使用、维护、周期检验、修理、标记和包装说明的一般要求
|
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
|
| BS EN 415-1-2000
|
包装机械的安全性.包装机械和相关设备术语和分类
|
Safety of packaging machines - Terminology and classification of packaging machines and associated equipment
|
| BS EN 415-2-2000
|
包装设备的安全.预制刚性容器包装设备
|
Safety of packaging machines - Pre-formed rigid container packaging machines
|
| BS EN 415-3-2000
|
包装机械的安全性.成型,填充和密封机械
|
Safety of packaging machines - Form, fill and seal machines
|
| BS EN 415-4-1998
|
机械包装的安全性.托板装载装置和托板卸载装置
|
Safety of packaging machines - Palletizers and depalletizers
|
| BS EN 415-5-2006
|
包装机械安全.包装机械
|
Safety of packaging machines - Wrapping machines
|
| BS EN 415-6-2006
|
包装机械的安全性.第6部分:托盘包装机械
|
Safety of packaging machines - Part 6: Pallet wrapping machines
|
| BS EN 415-7-2006
|
包装机械安全.组件和二次包装机械
|
Safety of packaging machines - Group and secondary packaging machines
|
| BS EN 60191-6-3-2001
|
半导体装置的机械标准化.表面固定半导体装置包装外廓线绘制一般规则.包装尺寸测量方法
|
Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP)
|
| BS EN 60264-3-5-1999
|
绕组线的包装.锥形筒输出线轴.热塑材料制成的线轴容器规范
|
Packaging of winding wires - Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material
|
| BS EN 60286-1-1998
|
自动装卸元件的包装.轴向引导连续带的元件用带包装
|
Packaging of components for automatic handling - Tape packaging of components with axial leads on continuous tapes
|
| BS EN 60286-2-1998
|
自动装卸元件的包装.具有连续带上非直接引导的元件的带状包装
|
Packaging of components for automatic handling - Tape packaging of components with unidirectional leads on continuous tapes
|
| BS EN 60286-3-2007
|
自动处理用元件的包装.在连续传送带上的表面安装元件的包装
|
Packaging of components for automatic handling - Packaging of surface mount components on continuous tapes
|
| BS EN 60286-5-2004
|
自动装卸元件的包装.矩阵盘
|
Packaging of components for automatic handling - Matrix trays
|
| BS EN 60286-6-2004
|
自动装配用元件的包装.表面安装元件的散装盒包装
|
Packaging of components for automatic handling - Bulk case packaging for surface mounting components
|
| BS EN 60512-11-13-2002
|
电子设备连接器.试验和测量.气候试验.试验11n.无钎焊包装连接的气密性
|
Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11n - Gas tightness, solderless wrapped connections
|
| BS EN 61076-4-108-2003
|
电子设备连接器.经质量评定的印制板连接器.符合IEC 60917-1的基本网格为2.5mm、有25mm模数间距和集成屏蔽功
|
Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
|
| BS EN 62090-2003
|
使用条形码和二维符号的电子元器件的产品包装标签
|
Product package labels for electronic components using bar code and two-dimensional symbologies
|
| BS EN 62137-2004
|
环境和耐用试验.区域阵列式包装件表面安装板的试验方法FBGA、BGA、FLGA、LGA、SON和QFN
|
Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
|
| BS EN 62148-11-2004
|
纤维光学有源元件及器件.包装和接口标准.14针调制器集成激光二极管发射机
|
Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters
|
| BS EN 62148-12-2004
|
纤维光学有源元件和器件.包装和接口标准.带同轴RF连接器的激光发射机
|
Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector
|
| BS EN 62148-4-2004
|
纤维光学有源元件和器件.包装和接口标准.PN 1x9塑料光纤无线电收发信机
|
Fibre optic active components and devices - Package and interface standards - PN 1x9 plastic optical fibre transceivers
|
| BS EN 62148-6-2003
|
纤维光学有源元件及器件.包装和接口标准.ATM-PON无线电收发信机
|
Fibre optic active components and devices - Package and interface standards - ATM-PON transceivers
|
| BS EN 862-2005
|
包装.防儿童拆开的包装.非药物产品用不能再封包的包装要求和试验程序
|
Packaging — Childresistant packaging — Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
|
| BS EN 868-10-2000
|
准备消毒的医疗装置用的包装材料和系统.用于生产热密封袋,卷轴和合盖的粘接剂包覆的非纺织的聚烯烃材料.要
|
Packaging materials and systems for medical devices which are to be sterilized - Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
|
| BS EN 868-2-1999
|
准备消毒的医疗设备用的包装材料和系统.消毒包裹物.要求和试验方法
|
Packaging materials and systems for medical devices which are to be sterilized - Sterilization wrap - Requirements and test methods
|
| BS EN 868-3-1999
|
准备消毒的医疗设备用的包装材料和系统.生产纸袋用的纸(EN 868-4中规定的)和生产盒和卷筒用的纸(EN 868-5中
|
Packaging materials and systems for medical devices which are to be sterilized - Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5): Requirements and test methods
|
| BS EN 868-4-1999
|
准备消毒的医疗设备用的包装材料和系统.纸袋.要求和试验方法
|
Packaging materials and systems for medical devices which are to be sterilized - Paper bags - Requirements and test methods
|
| BS EN 868-5-1999
|
消毒的医疗设备用包装材料和系统.纸和塑料薄膜制的热和可自密封袋及卷绕材料.要求和试验方法
|
Packaging materials and systems for medical devices which are to be sterilized - Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
|
| BS EN 868-6-1999
|
准备消毒的医疗设备用的包装材料和系统.经氧化乙烯或辐照杀菌的生产医用包裹的纸.要求和试验方法
|
Packaging materials and systems for medical devices which are to be sterilized - Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods
|
| BS EN 868-7-1999
|
准备消毒的医疗设备用的包装材料和系统.经环氧乙烷或辐射消毒的生产医用热密封包裹的粘性涂覆纸.要求和试验
|
Packaging materials and systems for medical devices which are to be sterilized - Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods
|
| BS EN 868-8-1999
|
准备消毒的医疗设备用的包装材料和系统.符合EN 285规定的蒸汽消毒器用的可重复使用的消毒容器.要求和试验方
|
Packaging materials and systems for medical devices which are to be sterilized - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods
|
| BS EN 868-9-2000
|
准备消毒的医疗装置用的包装材料和系统.用于生产热密封袋,卷轴和合盖的非包敷的非纺织聚烯烃材料.要求和试
|
Packaging materials and systems for medical devices which are to be sterilized - Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
|
| BS EN ISO 10303-210-2002
|
工业自动化系统和集成.产品数据表示和信息交流.应用协议.电子组装、互连和包装设计
|
Industrial automation systems and integration - Product data representation and exchange - Application protocol - Electronic assembly, interconnection, and packaging design
|
| BS EN ISO 11607-1-2006
|
终端无菌医学设备的包装.原材料、消毒阻挡系统和包装的要求
|
Packaging for terminally sterilized medical devices - Requirements for materials, sterile barrier systems and packaging systems
|
| BS EN ISO 11607-2-2006
|
终端无菌医学设备的包装.组成、密封和装配过程的确认要求
|
Packaging for terminally sterilized medical devices - Validation requirements for forming, sealing and assembly processes
|
| BS EN ISO 11683-1997
|
包装.触摸危险警告的要求
|
Packaging - Tactile warnings of danger - Requirements
|
| BS EN ISO 11897-2001
|
包装.热塑性塑料软薄膜袋.折边处的撕裂扩展试验
|
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds
|
| BS EN ISO 12048-2001
|
包装.满装运输包装.用压力试验机的压力试验和堆积试验
|
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester
|
| BS EN ISO 13355-2002
|
包装.完全满运输包装件和成组货件.垂直随机振动试验
|
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test
|
| BS EN ISO 15378-2006
|
药品的主要包装材料.以最佳制造实践(GMP)为参考的ISO 9001:2000应用的特殊要求
|
Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP)
|
| BS EN ISO 16101-2004
|
包装.危险物品的运输包装.塑料可混用性检验
|
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing
|
| BS EN ISO 16103-2006
|
包装.危险物品运输包装.再生塑料材料
|
Packaging - Transport packages for dangerous goods - Recycled plastics material
|
| BS EN ISO 16104-2003
|
包装.危险物品的运输包装.试验方法
|
Packaging - Transport packaging for dangerous goods - Test methods
|
| BS EN ISO 16106-2006
|
包装.危险货品运输包装.危险货物包装、中间散货容器(IBCs)和大型包装.应用ISO 9001的指南
|
Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001
|
| BS EN ISO 16467-2004
|
包装.危险货物的运输包装.IBCs的试验方法
|
Packaging - Transport packaging for dangerous goods - Test methods for IBCs
|
| BS EN ISO 21898-2006
|
包装.非危险货物用软的过渡性散货集装箱(FIBCs)
|
Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
|
| BS EN ISO 2233-2001
|
包装.满装的运输包装件和单元货物.试验状态的调节
|
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing
|
| BS EN ISO 2234-2002
|
包装.完全满装的运输包装和单元装载.利用静态装载法进行堆积试验
|
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load
|
| BS EN ISO 2244-2002
|
包装.完全满装运输包装和单元装载.水平冲击试验
|
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests
|
| BS EN ISO 2247-2003
|
包装.满装的运输包装件和单件荷载.固定低频率振动试验
|
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency
|
| BS EN ISO 23667-2007
|
包装.危险货物的运输包装.硬质塑料和塑料合成的IBCs.兼容性测试
|
Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing
|
| BS EN ISO 2873-2003
|
包装.满装运输包装件和单件荷载.低压试验
|
Packaging - Complete, filled transport packages and unit loads - Low pressure test
|
| BS EN ISO 2875-2002
|
包装.完全满装的运输包装件和单元装载.水喷淋试验
|
Packaging - Complete, filled transport packages and unit loads - Water-spray test
|
| BS EN ISO 7711-1-1998
|
牙科用旋转器械.金刚钻器具.尺寸、要求、标记和包装
|
Dental rotary instruments - Diamond instruments - Dimensions, requirements, marking and packaging
|
| BS EN ISO 780-1999
|
包装.货物装卸的图形标志
|
Packaging - Pictorial marking for handling of goods
|
| BS EN ISO 7965-2-1995
|
包装.包装袋.跌落试验.第2部分:热塑性塑料软簿膜包装袋
|
Sacks - Drop test - Sacks made from thermoplastic flexible film
|
| BS EN ISO 801-1-1995
|
纸浆.成批销售质量的测定.板式成捆包装的纸浆
|
Pulps - Determination of saleable mass in lots - Pulp baled in sheet form
|
| BS EN ISO 8317-2005
|
防儿童拆开的包装.可再次包装的要求和试验程序
|
Child-resistant packaging - Requirements and testing procedures for reclosable packages
|
| BS EN ISO 8318-2002
|
包装.完全满装运输包装和单元装载.用变频进行正弦波振动试验
|
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency
|
| BS EN ISO 8351-1-1995
|
包装.袋包装规格方法.纸袋
|
Packaging - Method of specification for sacks - Paper sacks
|
| BS EN ISO 8351-2-1995
|
包装.包装袋分类方法.热塑性塑料软薄膜包装袋
|
Packaging - Method of specification for sacks - Sacks made from thermoplastic flexible film
|
| BS EN ISO 8367-1-1995
|
包装.一般用途包装袋的尺寸公差.纸袋
|
Packaging - Dimensional tolerances for general purpose sacks - Paper sacks
|
| BS EN ISO 8367-2-1995
|
包装.一般用途包装袋的尺寸公差.热塑性塑料软薄膜包装袋
|
Packaging - Dimensional tolerances for general purpose sacks - Sacks made from thermoplastic flexible film
|
| BS ISO 10531-1995
|
包装.满装的运输包装.成组货件稳定性试验
|
Packaging - Complete, filled transport packages - Stability testing of unit loads
|
| BS ISO 13302-2003
|
感官分析.评定食品包装引起的味道改变的方法
|
Sensory analysis - Methods for assessing modifications to the flavour of foodstuffs due to packaging
|
| BS ISO 13355-2002
|
包装.完全填充的运输包装和单元装载.垂直随机振动试验
|
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test
|
| BS ISO 1434-1996
|
包装式天然橡胶.包装涂层量的测定
|
Natural rubber in bales - Amount of bale coating - Determination
|
| BS ISO 14535-2001
|
摄影技术.电子扫描仪、成像胶片和胶卷的室光负载包装件.尺寸和有关要求
|
Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements
|
| BS ISO 14850-1-2004
|
核能.废弃物包装件的活性测量.带公开几何条件的整体模型中的高分辨率γ光谱测定法
|
Nuclear energy - Waste-packages activity measurement - High-resolution gamma spectrometry in integral mode with open geometry
|
| BS ISO 15378-2006
|
药品的主要包装材料.以优秀制造实践(GMP)为基准对ISO 9001:2000应用的特殊要求
|
Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to good manufacturing practice (GMP)
|
| BS ISO 15394-2000
|
包装.航运、运输和验收标签的两维符号和条形码
|
Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
|
| BS ISO 15750-1-2002
|
包装.钢筒.最小总容量为 208 升、 210 升和216.5 升的活动盖圆筒(盖可拆下)
|
Packaging - Steel drums - Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l
|
| BS ISO 15750-2-2002
|
包装.钢筒.最小总容量为 212升、216,5 升和 230 升的密封盖圆筒
|
Packaging - Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l
|
| BS ISO 15750-3-2002
|
包装.钢筒.插入法兰型密封系统
|
Packaging - Steel drums - Inserted flange-type closure systems
|
| BS ISO 16883-2007
|
包装.危险物品运输包装件.大包装试验方法
|
Packaging - Transport packages for dangerous goods - Test methods for large packagings
|
| BS ISO 1997-1993
|
粒状软木和软木粉.分类、性能和包装
|
Granulated cork and cork powder - Classification, properties and packing
|
| BS ISO 20299-1-2006
|
橡胶包包装用薄膜.丁二烯橡胶(BR)和丁苯橡胶(SBR)
|
Film for wrapping rubber bales - Butadiene rubber (BR) and styrene-butadiene rubber (SBR)
|
| BS ISO 20848-1-2007
|
包装.塑料圆筒.标称容量113.6 L～220 L的活动开口圆桶
|
Packaging - Plastics drums - Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l
|
| BS ISO 20848-2-2007
|
包装.塑料桶.标称容量208.2 L和220 L的固定盖(密封盖)圆桶
|
Packaging - Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l
|
| BS ISO 20848-3-2007
|
包装.塑料圆筒.标称容量113.6 L～220 L塑料圆桶的塞子/桶孔关闭系统
|
Packaging - Plastics drums - Plug/bungs closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l
|
| BS ISO 22715-2006
|
化妆品.包装和标签
|
Cosmetics - Packaging and labelling
|
| BS ISO 3869-2001
|
合成材料的瓶塞.膨胀连接填料.规范、包装和标记
|
Composition cork - Expansion joint fillers - Specifications, packaging and marking
|
| BS ISO 4709-2001
|
复合软木.衬垫材料.分类体系、要求、取样、包装和标记
|
Composition cork - Gasket material - Classification system, requirements, sampling, packing and marking
|
| BS ISO 4714-2000
|
合成软木.规范、抽样、包装和作标记
|
Composition cork - Specifications, sampling, packaging and marking
|
| BS ISO 5989-1996
|
摄影技术.卤化银基照相材料冲洗用预包装化学制品.词汇
|
Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary
|
| BS ISO 6196-4-1999
|
显微摄影.词汇.第4部分:材料和包装
|
Micrographics - Vocabulary - Materials and packaging
|
| BS ISO 6670-2002
|
速溶咖啡.带内衬层的散装单元包装的取样方法
|
Instant coffee - Sampling method for bulk units with liners
|
| BS ISO 8009-9-1997
|
可重复使用的橡胶避孕工具.第9部分:包装和标签
|
Reusable rubber contraceptive diaphragms - Packaging and labelling
|
| BS ISO/IEC 11430-1995
|
信息技术.编程语言.ADA的初等函数的一般包装
|
Information technology. Programming languages. Generic package of elementary functions for ADA
|
| BS ISO/IEC 11729-1995
|
信息技术.编程语言.ADA原函数的一般包装
|
Information technology. Programming languages. Generic package of primitive functions for Ada
|
| BS PAS 103-2004
|
收集的废塑料的包装.用于再循环的收集和制备的良好规程指南和质量规范
|
Collected waste plastics packaging - Specification for quality and guidance for good practice in collection and preparation for recycling
|
| BS SP 13, 14, 15 and 16-1949
|
飞行器用垫圈规范(主要用于包装)
|
Specification for washers for aircraft purposes (primarily for packing purposes)
|
| KIT 15-1999
|
玩具安全包装
|
Toy safety pack
|
| KIT 69-2001
|
包装和环境丛书
|
Packaging and the environment set
|
| PD 6592-1996
|
包装.包装用能源恢复
|
Packaging. Energy recovery from used packaging
|
| PD 6607-1996
|
包装.包装系统用寿命周期库存管理分析的推荐标准
|
Packaging. Recommendations for conducting life-cycle inventory analysis of packaging systems
|
| PD ISO/TR 210-2000
|
香精油.包装、状态调节和储存的一般规则
|
Essential oils. General rules for packaging, conditioning and storage
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com