5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




英国垃圾和污水处理标准(BS)翻译目录查询

ASME | BS | DIN | EN | GB | ISO | JIS | NF | 
返回

编号中文名称英文名称
BS EN 752-1-1996室外建筑物的排水和污水系统.概述和定义Drain and sewer systems outside buildings - Generalities and definitions
BS 6297-1983小型污水处理工程和污水池设计及安装实用规程Code of practice for design and installation of small sewage treatment works and cesspools
BS EN 598-1995污水工程用球墨铸铁管、接头、配件及其连接件.要求和试验方法Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
BS EN 295-6-1996排水管和污水管用陶制管、管件及管接头.陶制管人孔的要求Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes
BS EN 295-7-1996排水管和污水管用陶制管、管件及管接头.陶制管和管插接接头的要求Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking
BS EN 681-1-1996弹性密封件.水和污水排放设施用管联接密封件的材料要求.硫化橡胶Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Vulcanized rubber
BS EN 1054-1996塑料管道系统.建筑物内粪水和污水排放下水道用热塑管道系统.连接件的气密性试验方法Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
BS EN 1306-1996内河航运船只.污水排放用连接件Inland navigation vessels - Connections for the discharge of waste water
BS EN 752-3-1997室外建筑物的排水和污水系统.计划Drain and sewer systems outside buildings - Planning
BS EN 752-2-1997室外建筑物的排水和污水系统.性能要求Drain and sewer systems outside buildings - Performance requirements
BS EN 1671-1997建筑物外压力污水系统Pressure sewerage systems outside buildings
BS EN ISO 5667-13-1998水质.采样.第13部分:生活污水和水处理厂的污泥采样指南Water quality - Sampling - Guidance on sampling of sludges from sewage and water treatment works
BS EN 752-5-1998建筑物外的排水和污水系统.修复Drain and sewer systems outside buildings - Rehabilitation
BS EN 752-6-1998室外建筑物的排水和污水系统.泵抽排装置Drain and sewer systems outside buildings - Pumping installations
BS EN 12889-2000排水管和污水管的非挖沟施工和试验Trenchless construction and testing of drains and sewers
BS EN 752-4-1998建筑物外的排水和污水系统.水工设计和环境考虑Drain and sewer systems outside buildings - Hydraulic design and environmental considerations
BS EN 1401-1-1998不承压地下雨水管和污水管用塑料管道系统.未增塑聚氯乙烯(PVC-U).管道、配件和系统规范Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system
BS EN 752-7-1998室外建筑物的排水和污水系统.维修和使用Drain and sewer systems outside buildings - Maintenance and operations
BS EN 1123-1-1999污水系统用插接管的纵向焊接热浸镀锌钢管及配件.要求、试验和质量控制Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control
BS EN 1124-1-1999污水系统用带套管和孔座的纵向焊接不锈钢管和配件.要求、测试和质量控制Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
BS EN 1124-3-1999污水系统用带套管和孔座的纵向焊接不锈钢管和配件.系统X、尺寸Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions
BS EN 1293-1999气压排气管、排水管和污水道中使用部件的一般要求General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
BS EN 773-1999液压压力排气管、排水管和污水管道中使用部件的一般要求General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
BS EN 1123-2-1999污水系统用带套管和孔座的纵向焊接的热浸镀锌钢管和配件.尺寸Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions
BS EN 12255-11-2001污水处理厂.要求的一般数据Wastewater treatment plants - General data required
BS EN 1989-2000热塑管道系统.地下埋装的非承压污水设施用连接件.通过对密封压力的估计对带热塑弹力密封件的连接件的长期密Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
BS EN 12255-3-2000污水处理厂.预处理Wastewater treatment plants - Preliminary treatment
BS EN 12255-1-2002污水处理工厂.一般建造原则Wastewater treatment plants - General construction principles
BS EN 13566-3-2003地下无压排水管网和污水管网翻新用塑料管道系统.紧密配合管加衬Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with close fit pipes
BS EN 12255-4-2002污水处理厂.初次澄清Wastewater treatment plants - Primary settlement
BS EN 13566-1-2003地下无压排水管网和污水管网翻新用塑料管道系统.总则Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - General
BS EN 13566-4-2003地下无压排水管网和污水管网翻新用塑料管道系统.现场加工管衬里Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes
BS DD ENV 1852-2-2001非承压地下排放和污水用塑料管道系统.聚丙烯(PP).符合性评定指南Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity
BS EN 12255-9-2002污水处理厂.气味控制和通风Wastewater treatment plants - Odour control and ventilation
BS EN 12255-6-2002污水处理厂.活性污泥处理法Wastewater treatment plants - Activated sludge processes
BS EN 12255-7-2002污水处理厂.生物固定薄膜反应器Wastewater treatment plants - Biological fixed-film reactors
BS DD ENV 1401-2-2001非承压地下排放和污水用塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for assessment of conformity
BS DD ENV 13801-2001建筑物内污物污水排放(低温和高温)用塑料管道系统.热塑管.推荐的安装实施规程Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
BS DD ENV 1566-2-2001建筑物内污物污水排放(高、低温)用塑料管道系统.氯化聚氯乙烯(PVC-C).符合性评定指南Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Guidance for the assessment of conformity
BS DD ENV 1455-2-2001建筑物内污物污水排放(高、低温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物(ABS).符合性评定指南Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene- styrene (ABS) - Guidance for the assessment of conformity
BS DD ENV 1519-2-2001建筑物内污物污水排放(高、低温)用塑料管道系统.聚乙烯(PE).符合性评定指南Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Guidance for the assessment of conformity
BS DD ENV 1329-2-2001建筑内污物污水排放(高、低温)用塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity
BS DD ENV 1401-3-2001非承压地下排放和污水用塑料管道系统.未增塑的聚氯乙烯(PVC-U).安装指南Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for installation
BS DD ENV 1451-2-2001建筑物内污物和污水排放(高、低温)用塑料管道系统.聚丙烯(PP).符合性评定指南Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Guidance for the assessment of conformity
BS ISO 9631-2004橡胶密封件.温度为110℃及以下的热水供给、排水和污水管道用连接环.材料规范Rubber seals - Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C - Specifications for the material
BS EN ISO 15083-2003小艇.舱底污水抽吸系统Small craft - Bilge-pumping systems
BS EN 13508-1-2003建筑物外部排水和污水道系统的条件.一般要求Condition of drain and sewer systems outside buildings - General requirements
BS EN 13244-2-2003一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.管道Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Pipes
BS EN 13244-1-2003一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.总则Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - General
BS EN 12255-15-2003污水处理厂.活性污泥处理厂曝气池清水中充氧量的测量Wastewater treatment plants - Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
BS EN 13244-5-2003一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.系统目的的适合性Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fitness for purpose of the system
BS EN 13244-4-2003一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.阀门Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves
BS EN 13244-3-2003一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.配件Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fittings
BS DD CEN/TS 13244-7-2004排水和污水处理通用地下和地上压力设备用塑料管道系统.聚乙烯(PE).符合性评定指南Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity
BS EN ISO 15749-4-2004船舶和海上技术.船舶和海上结构物的排水系统.卫生排水和污水处理管Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, sewage disposal pipes
BS EN 1123-3-2004污水系统用带插接套的纵向焊接热浸镀锌钢管及配件.真空排水系统以及造船用排水系统的尺寸和特殊要求Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
BS EN 295-10-2005排水和污水管道用陶土管、配件及管连接件.性能要求Vitrified clay pipes and fittings and pipe joints for drains and sewers - Performance requirements
BS EN 13508-2-2003建筑物外部排水和污水道系统的条件.目视检验编码系统Conditions of drain and sewer systems outside buildings - Visual inspection coding system
BS DD CEN/TS 12666-2-2006非承压地下排放和污水用塑料管道系统.聚乙烯(PE).符合性评定指南Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity
BS 3495-1972铝垃圾箱规范Specification for aluminium refuse storage containers
BS 792-1973低碳钢垃圾箱规范Specification for mild steel dustbins
BS 1136-1972低碳钢垃圾箱规范Specification for mild steel refuse storage containers
BS 6642-1985一次使用的聚乙烯塑料垃圾袋规范Specification for disposable plastics refuse sacks made from polyethylene
BS EN 1501-1-1998垃圾收集车及其相关提升装置.一般要求和安全性要求.后部装载的垃圾收集车Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Rear-end loaded refuse collection vehicles
BS 1703-2005垃圾道和垃圾斗规范Refuse chutes and hoppers - Specification
编号中文名称英文名称

返回
程序 | 样本HTML文件