5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




英国密封标准(BS seals standards)翻译目录查询

ASTM |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
BS 1806-1989 环形密封圈("O"形环)及其安装座(英制系列)的尺寸规范 Specification for dimensions of toroidal sealing rings ('O'-rings) and their housings (inch series)
BS 2494-1990 管道工程和管道连接用弹性密封件规范 Specification for elastomeric seals for joints in pipework and pipelines
BS 2499-2-1992 混凝土路面热接密封系统.第2部分:接缝密封剂应用惯例 Hot-applied joint sealant systems for concrete pavements - Code of practice for the application and use of joint sealants
BS 2499-3-1993 混凝土路面热敷接缝密封系统.第3部分:试验方法 Hot-applied joint sealant systems for concrete pavements - Methods of test
BS 2782-5 Method 540B-1982 塑料的试验方法.风化条件下光学性能和颜色性能.实验室光源辐照方法,(氙弧灯、密封碳弧灯、敞口火焰碳弧灯、 Methods of testing plastics - Optical and colour properties, weathering - Methods of exposure to laboratory light sources, (xenon arc lamp, enclosed carbon arc lamp, open-flame carbon arc lamp, fluorescent tube lamps)
BS 2M 63-1993 航空航天流体动力系统端口连接、密封和配件端部的尺寸规范 Specification for dimensions of aerospace fluid system port connection, seal and fitting end
BS 3381-1989 符合BS 1560规范的钢法兰缘用螺旋绕组密封垫规范 Specification for spiral wound gaskets for steel flanges to BS 1560
BS 3712-1-1991 建筑和结构密封剂.第1部分:均匀性、相对密度和渗透性试验方法 Building and construction sealants - Methods of test for homogeneity, relative density and penetration
BS 3712-2-1973 建筑施工用密封胶.第2部分:渗流、沾污性、收缩、储存期限和可涂性试验方法 Building and construction sealants - Methods of test for seepage, staining, shrinkage, shelf life and paintability
BS 3712-3-1974 建筑施工用密封胶.第3部分:使用寿命,结皮特性和粘性消失时间试验方法 Building and construction sealants - Methods of test for application life, skinning properties and tack-free time
BS 3712-4-1991 建筑和结构密封剂.第4部分:附着强度剥离试验方法 Building and construction sealants - Method of test for adhesion in peel
BS 3818-1964 柴油机车及有轨内燃机车自动密封加油接头规范 Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
BS 3970-2-1991 医疗制品灭菌消毒设备.第2部分:含水液体密封硬质容器用蒸汽消毒器规范 Sterilizing and disinfecting equipment for medical products - Specification for steam sterilizers for aqueous fluids in sealed rigid containers
BS 4129-1990 板材钢电阻焊用焊接底剂、焊透密封剂、粘合剂和蜡规范 Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel
BS 4371-1991 纤维质密封垫规范 Specification for fibrous gland packings
BS 4518-1982 环形密封圈("O"形环)及其安装座的米制尺寸规范 Specification for metric dimensions of toroidal sealing rings ('O'-rings) and their housings
BS 5288-1976 密封放射源规范 Specification - Sealed radioactive sources
BS 5380-1984 用O 型圈密封及G 系列紧固螺纹的液压系流入口及连接螺栓规范 Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
BS 542-1973 矿井和采石场设备用电缆密封装置和密封盒规范 Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries
BS 5751-1987 往复运动的液压密封件壳体尺寸规范 Specification for dimensions of housings for hydraulic seals for reciprocating applications
BS 5857-1.1-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第1节:总则 Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - General
BS 5857-1.2-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第2节:非放射性示踪剂恒速喷射法 Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Constant rate injection method using non-radioactive tracers
BS 5857-1.3-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第3节:放射性示踪剂恒速喷射法 Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Constant rate injection method using radioactive tracers
BS 5857-1.4-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第4节:非放射性示踪剂渡越时间法 Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Transit time method using non-radioactive tracers
BS 5857-1.5-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第5节:放射性示踪剂渡越时间法 Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Transit time method using radioactive tracers
BS 5857-2.1-1980 密封管道中流体流量的示踪剂测量法.第2部分:气体流量测量.第1节:总则 Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of gas flow - General
BS 5857-2.4-1980 使用示踪剂的密封管道中流体流量的测量方法.气体流量的测量.采用放射性示踪剂的过渡时间法 Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of gas flow - Transit time method using radioactive tracers
BS 6068-5.23-1999 水质.生物法.水介质中有机化合物最终有氧生物降解能力的评价.密封容器中释放无机碳的分析方法(CO2顶空试验) Water quality - Biological methods - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of released inorganic carbon in sealed vessels (CO2 headspace test) - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of released inorganic carbon in sealed vessels
BS 6121-1-2005 机械电缆密封套.铠装密封套.要求和试验方法 Mechanical cable glands - Armour glands - Requirements and test methods
BS 6121-5-2005 机械电缆密封套.电缆密封套和铠装密封套的选择、安装和检验的实施规范 Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands
BS 6199-1.2-1991 用称重及体积法测定密封管道中流体流量的方法.第1部分:称重法.第2节:静态称重装置检验程序 Measurement of liquid flow in closed conduits using weighing and volumetric methods - Weighing method - Procedures for checking static weighing systems
BS 6213-2000 建筑密封剂的选择.指南 Selection of construction sealants - Guide
BS 6499-1998 金属容器的金属螺旋颈、螺旋盖和内部密封件规范 Metal screw necks, screw caps and inner seals for metal containers - Specification
BS 6997-1990 使用BS 6996丁腈橡胶制成的橡胶环形密封圈('O'形圈)规范 Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
BS 7417-1991 平面'O'形密封液压耦合器界面尺寸规范 Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
BS 7603-1992 玻璃对玻璃密封应力测定方法 Method for determination of stresses in glass-to-glass sealings
BS 7677-1993 管道接头用密封圈缺陷分类推荐标准 Recommendations for classification of imperfections in pipe joint rings
BS 7714-2005 液动装置用密封件的保护及检修.指南 Care and handling of seals for fluid power applications - Guide
BS 7777-4-1993 低温用平底、立式、圆柱形储罐.液态氧、液态氮和液态氩储存单层密封储罐的设计和制造规范 Flat-bottomed, vertical, cylindrical storage tanks for low temperature service - Specification for the design and construction of single containment tanks for the storage of liquid oxygen, liquid nitrogen and liquid argon
BS 7780-1-1994 旋转轴唇形密封件规范.标称尺寸和公差 Specification for rotary shaft lip type seals - Nominal dimensions and tolerances
BS 7780-2-1994 旋转轴唇形密封件规范.第2部分:词汇 Specification for rotary shaft lip type seals - Vocabulary
BS 7780-3-1994 旋转轴唇形密封件.储存、搬运和安装 Rotary shaft lip type seals - Storage, handling and installation
BS 7780-5-1994 旋转轴唇形密封件规范.第5部分:目测缺陷标记 Specification for rotary shaft lip type seals - Identification of visual imperfections
BS 7842-1996 具有预作用的螺纹密封特性的安装在螺纹上的螺栓、螺钉和螺柱 Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
BS 7874-1998 管道工程和管线系统连接的弹性密封件微生物损害的试验方法 Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
BS 8000-16-1997 建筑工地操作工艺.建筑物用密封剂的封接件实用规程 Workmanship on building sites - Code of practice for sealing joints in buildings using sealants
BS 8449-2005 移动适应因数大于25%的房屋和建筑物密封剂.在可变温度下粘着特性的测定的试验方法 Building and construction sealants with movement accommodation factors greater than 25% - Method of test for determination of adhesion/cohesion properties at variable temperatures
BS 9073 N0034-1978 固定式钽介质电容器详细规范.极性非固体介质多孔阳极.轴向引线终端PTFE/弹性密封管状绝缘金属壳.全面附加评 Detail specification for fixed tantalum electrolytic capacitors - Porous anode, polar non-solid electrolyte - Tubular insulated metallic case, PTFE/elastomer seal, axial wire terminations - Full plus additional assessment level
BS 9131 N001 to 016-1974 导杆驱动线绕或非线绕预调电位计详细规范.长方形和正方形、密封容器、与电阻元件绝缘的驱动装置、每个行程 Detail specification for lead-screw actuated wirewound or non-wirewound preset potentiometers - Rectangular and square forms, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel - Full assessment level
BS 9133 N001 to 003-1975 单旋非线绕小功率旋转电位器详细规范.与电阻元件绝缘的主轴、主轴和密封仪表板或容器、主轴和密封仪表板.全 Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full assessment level
BS 9210 N0009-1-1978 射频连接器(SMC系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.全面评定级 Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 $2I, screw coupling - Full assessment level
BS 9210 N0009-2-1978 射频连接器(SMA系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.控制图.配合面详图和测量数据 Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information
BS 9210 N001-1-1975 射频连接器(BNC型)的详细规范.50Ω的密封、焊接、静态接触.全面评定级 Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level
BS 9210 N007-1-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50Ω、插入式连接.全面评定级 Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 $2I, snap-on couplings - Full assessment level
BS 9210 N007-2-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50Ω、连接扣.控制图.配合面详图和测量数据 Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information
BS 9250-2007 坡屋顶顶棚密封性设计的实施规范 Code of practice for design of the airtightness of ceilings in pitched roofs
BS 9301 N002-1971 通用硅信号二极管详细规范.150mA、150V、密封、玻璃封装.一般应用范围Q Detail specification for general purpose silicon signal diodes - 150 mA, 150 V, hermetically sealed, glass encapsulation - General application category Q
BS 9305 N001-1972 硅稳压器二极管详细规范.1.5W、3.3-33V(5%)、密封.一般应用范围Q Detail specification for silicon voltage regulator diodes - 1.5 W , 3.3 to 33 V (5%), hermetically sealed - General application category Q
BS 9305 N041-1972 硅稳压器二极管详细规范.400mW、2.7-33V(5%)、密封、玻璃封装.一般应用范围Q Detail specification for silicon voltage regulator diodes - 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation - General application category Q
BS 9305 N042-1972 硅稳压器二极管详细规范.1.5W、6.8-200V(5%)、密封.一般应用范围C Detail specification for silicon voltage regulator diodes - 1.5 W , 6.8 to 200 V (5%), hermetically sealed - General application category C
BS 9305 N044-1974 硅稳压器二极管详细规范.1.0W、3.3-33V(5%)、密封.全面评定级 Detail specification for silicon voltage regulator diodes - 1.0 W , 3.3 to 33 V (5%), hermetically sealed - Full assessment level
BS 9364 N007 and N009-1978 小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、额定环境条件、密封封装.全面附加评定级 Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
BS 9364 N008 and N010-1978 小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、额定环境条件、密封封装(长引线型).全面附加评定级 Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
BS 9364 N011-1978 小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装、全面附加评定级 Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
BS 9364 N012-1978 小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装(长引线型).全面和附加评估级 Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
BS 9364 N013-1979 小功率硅P-N-P型开关晶体管详细规范.25V、平面外延、额定环境条件、密封封装、全面附加评定级 Detail specification for low power silicon p-n-p switching transistors - 25 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
BS 9364 N016-1979 小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装.全面附加评定级 Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
BS 9364 N017-1979 小功率硅n-p-n型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装(长引线型).全面附加评定级 Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
BS 9522 N0003-1990 直流和低频用多触点圆形电气连接器详细规范.带后可插入、后释放、后可拆卸压接触点的无档板密封、耐环境影 Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles - Full plus airframe fit assessment
BS 9612 N004-1977 振荡器用冷焊密封石英晶体振子详细规范.DN、47 U/2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.宽温范围 Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N005-1977 振荡器用冷焊密封石英晶体振子详细规范.DN、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.窄温范围(非温控) Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode , AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
BS 9612 N006-1977 振荡器用冷焊密封石英晶体振子详细规范.DN、47U/2、DQ和DP外壳、17至75MHz频率范围.宽温范围(非温控)操作的 Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N008-1977 振荡器用冷焊密封石英晶体振子详细规范.DN、DQ和DP外壳、50至125MHz频率规范.宽温范围(非温控)操作用第五谐 Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N010-1979 振荡器用冷焊密封石英晶体振子详细规范.DP外壳、6.0至25MHz频率范围.宽温范围(非温控)操作的基波厚度剪切模 Detail specification for cold welded seal quartz crystal units for oscillator applications - DK enclosure, 6.0 to 25 MHz frequency range - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N016-1979 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.宽温范围(非 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N017-1979 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.窄温范围(非 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
BS 9612 N018-1979 振荡器用电阻焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.宽温范围(非温控)操作的 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N019-1979 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.窄温范围(非温控)操作的第 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
BS 9612 N020-1979 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.宽温范围(非温控)操作的第 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N021-1979 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、50至125MHz频率范围.窄温范围(温控)操作的第五 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
BS AU 200-1a-1984 载重货车用减少喷溅装置.第1a部分:密封装置的设计规范 Spray reducing devices for heavy goods vehicles - Specification for design of containment devices
BS AU 40-4a-1966 机动车辆照明及信号设备规范.第4a部分:密封式光束前照灯 Specification for motor vehicle lighting and signalling equipment - Sealed beam headlamps
BS CECC 30201 001-1981 固定式钽电容器详细规范.多孔阳极、固态电解质.圆形绝缘/非绝缘金属外壳、极性/密封、轴向终端.基本附加评 Harmonized detail specification for fixed tantalum capacitors - Porous anode, solid electrolyte - Cylindrical insulated/non-insulated metallic case, polar/hermetic seal, axial terminations - Basic plus additional assessment level
BS CECC 45004-1977 电子元器件用质量评估协调体系规范.空白详细规范:盘形密封功率管 Specification for harmonized system of quality assessment for electronic components - Blank detail specification: disc seal power tubes
BS DD 8455-2007 窗、门、玻璃暖房和幕墙用密封垫和挡风雨条材料.要求和试验方法 Materials for gaskets and weatherstripping for windows, doors, conservatories and curtain walling - Requirements and test methods
BS DD ENV 13050-2001 幕墙.水密封性.空气压力和水喷射动态条件下的实验室试验 Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
BS DD ISO/PAS 17712-2003 货运集装箱.机械密封件 Freight containers - Mechanical seals
BS EN 10226-1-2004 螺纹上有压力密封接缝的管螺纹.锥形外螺纹和平行内螺纹.尺寸、公差及名称与符号 Pipe threads where pressure tight joints are made on the threads - Taper external threads and parallel internal threads - Dimensions, tolerances and designation
BS EN 10226-3-2005 螺纹上有压力密封接缝的管螺纹.用极限量规验证 Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges
BS EN 10246-1-1996 钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
BS EN 10246-2-2000 钢管的无损检验.验证水密封性能用的无缝和焊接的(埋弧焊除外)奥氏体铁素体钢管的自动涡流试验 Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
BS EN 1119-1996 塑料管道系统.玻璃增强的热固塑料管和配件.挠性和还原接合接头密封性和耐损伤性试验方法 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints
BS EN 116205/116206/116207-1996 电子元器件的质量评估协调体系.空白详细规范.气密密封继电器.用于严格的静态环境条件(116025).用于严格的动 Harmonized system of quality assessment for electronic components - Blank detail specification - Hermetically sealed relays - For severe static environmental conditions (116205) - For severe mobile environmental conditions (116206) - For severe airborne environmental conditions (116207)
BS EN 1229-1997 塑料管道系统.玻璃增强的热固性塑料管.验证短期内部压力下墙的密封性试验方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
BS EN 12373-4-1999 铝和铝合金.阳极氧化.预先酸处理的染料污点密封试验的阳极氧镀层吸收强度损失评估 Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
BS EN 12373-5-1999 铝和铝合金.阳极氧化.通过导纳测量评估密封阳极氧化物镀层质量 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
BS EN 12373-6-1999 铝和铝合金.阳极氧化.测定未预先酸处理的浸入磷酸/铬酸溶液后质量损失以评估密封阳极氧化镀层质量 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
BS EN 12373-7-1999 铝和铝合金.阳极氧化.测定预先酸处理的浸入磷酸/铬酸溶液后质量损失评估密封阳极氧化镀层质量 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
BS EN 12690-1999 生物技术.轴密封的性能标准 Biotechnology - Performance criteria for shaft seals
BS EN 12707-2000 塑料圆筒.额定容量为210升,220升和225升的非移动式(盖密封盖)圆筒 Plastic drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l
BS EN 12709-2000 塑料圆桶.额定容量为20L至120L圆形截面的固定桶盖(密封盖)的圆桶 Plastic drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l
BS EN 12711-2000 钢柱桶.最小总容量为230L的不可移动桶盖(密封盖)的柱桶 Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 230 l
BS EN 12756-2001 机械密封件.主要尺寸,标识和材料代码 Mechanical seals - Principal dimensions, designation and material codes
BS EN 1277-2004 塑料管道系统.地下无压用热塑性管道系统.弹性密封环型接头密封性的试验方法 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
BS EN 1279-4-2002 建筑物用玻璃.隔热玻璃组件.封边密封件的物理属性的试验方法 Glass in building - Insulating glass units - Methods of test for the physical attributes of edge seals
BS EN 12928-2000 总容量为17升至230升的钢桶用插入法兰式密封系统 Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l
BS EN 13022-1-2006 建筑玻璃.建筑密封玻璃.支撑和无支撑单层和多层玻璃的建筑密封玻璃系统用玻璃制品 Glass in building - Structural sealant glazing - Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
BS EN 13022-2-2006 建筑玻璃.建筑密封玻璃.安装规则 Glass in building - Structural sealant glazing - Assembly rules
BS EN 13090-2000 建筑物内气体管道的螺纹接头重新密封方法 Means for resealing threaded joints of gas pipework in buildings
BS EN 1366-3-2004 服务设施的防火试验.渗透密封件 Fire resistance tests for service installations - Penetration seals
BS EN 1366-4-2006 服务设施的耐火性试验.线性接缝密封件 Fire resistance tests for service installations - Linear joint seals
BS EN 13880-1-2003 热用接缝密封胶.25 鳦时密度测定的试验方法 Hot applied joint sealants - Test method for the determination of density at 25 °C
BS EN 13880-10-2003 热用接缝密封胶.连续膨胀和压缩后粘结性测定的试验方法 Hot applied joint sealants - Test method for the determination of adhesion and cohesion following continuous extension and compression
BS EN 13880-11-2003 热用密封胶.功能试验用沥青试验块渗透性及与沥青路面兼容性测定的试验方法 Hot applied joint sealants - Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements
BS EN 13880-12-2003 热用接缝密封胶.粘结试验用混凝土试验块生产的试验方法(配方法) Hot applied joint sealants - Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
BS EN 13880-13-2003 热用填缝密封胶.非连续伸展性测定的试验方法(粘附试验) Hot applied joint sealants - Test method for the determination of the discontinuous extension (adherence test)
BS EN 13880-2-2003 热用接缝密封胶.25 鳦时针入度测定的试验方法 Hot applied joint sealants - Test method for the determination of cone penetration at 25 °C
BS EN 13880-3-2003 热用密封胶.渗透性和恢复性(回弹性)测定的试验方法 Hot applied joint sealants - Test method for the determination of penetration and recovery (resilience)
BS EN 13880-4-2003 热用密封胶.耐热性测定的试验方法.穿透值的变化 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value
BS EN 13880-5-2004 热用接缝密封胶.抗流动性测定的试验方法 Hot applied joint sealants - Test method for the determination of flow resistance
BS EN 13880-6-2004 热用密封胶.试验用样品制备的方法 Hot applied joint sealants - Method for the preparation of samples for testing
BS EN 13880-7-2003 热用接缝密封胶.接缝密封胶功能检验 Hot applied joint sealants - Function testing of joint sealants
BS EN 13880-8-2003 热用接缝密封胶.燃料浸渍后耐燃料接缝密封胶重量变化的测定用试验方法 Hot applied joint sealants - Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
BS EN 13880-9-2003 热用密封胶.与沥青路面兼容性的测定的试验方法 Hot applied joint sealants - Test method for the determination of compatibility with asphalt pavements
BS EN 14187-1-2003 冷用密封胶.硬化率测定的试验方法 Cold applied joint sealants - Test method for the determination of rate of cure
BS EN 14187-2-2003 冷用密封胶.消粘时间测定的试验方法 Cold applied joint sealants - Test method for the determination of tack free time
BS EN 14187-3-2003 冷用密封胶.自{动找)平特性测定的试验方法 Cold applied joint sealants - Test method for the determination of self-levelling properties
BS EN 14187-4-2003 冷用密封胶.浸入试验燃油后质量和体积变化测定的试验方法 Cold applied joint sealants - Test method for the determination of the change in mass and volume after immersion in test fuel
BS EN 14187-5-2003 冷用密封胶.耐水解作用测定的试验方法 Cold applied joint sealants - Test method for the determination of the resistance to hydrolysis
BS EN 14187-6-2003 冷用密封胶.浸入化学液体后粘着性/凝聚性测定的试验方法 Cold applied joint sealants - Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids
BS EN 14187-7-2003 冷用密封胶.耐火性测定的试验方法 Cold applied joint sealants - Test method for the determination of the resistance to flame
BS EN 14187-8-2003 冷用密封胶.用紫外线照射法进行人工风化测定的试验方法 Cold applied joint sealants - Test method for the determination of the artificial weathering by UV-irradiation
BS EN 14187-9-2006 冷用密封胶.试验办法.接缝密封胶的功能测试 Cold applied joint sealants - Test methods - Function testing of joint sealants
BS EN 14188-1-2004 填缝料和密封剂.热用密封剂的规范 Joint fillers and sealants - Specifications for hot applied sealants
BS EN 14188-2-2005 填缝料和密封剂.冷用密封剂的规范 Joint fillers and sealants - Specifications for cold applied sealants
BS EN 14188-3-2006 接缝填充物和密封胶.预成型的接缝密封件规范 Joint fillers and sealants - Specification for preformed joint seals
BS EN 14241-1-2005 烟囱.弹性密封件和弹性密封剂.物料要求和试验方法.第1部分:烟道内衬密封件 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods Part 1: Seals in flue liners
BS EN 14741-2006 热塑管和管道系统.非压力掩埋用接头.通过评估密封压力测定弹性密封件接合处的长期密封性能的试验方法 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
BS EN 14840-2005 填缝料和密封剂.预制接缝密封件的试验方法 Joint fillers and sealants - Test methods for preformed joint seals
BS EN 14989-1-2007 烟囱.密封房间加热用金属烟囱和独立材料供气管的要求和试验方法.C6型设施用垂直送空气/燃气风道终端 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Vertical air/flue terminals for C6-type appliances
BS EN 15033-2006 利用LPG(液化石油气)生产车辆和小船用卫生热水的密封型贮水式热水器 Room sealed storage water heaters for the production of sanitaryhot water using LPG for vehicles and boats
BS EN 1514-8-2004 法兰及其连接件.PN标示法兰用垫圈的尺寸.有槽法兰用聚合O形密封圈 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Polymeric O-Ring gaskets for grooved flanges
BS EN 15208-2007 危险物品的运输槽罐.密封包装运输系统.工作原理和接口规范 Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications
BS EN 15434-2006 建筑玻璃.建筑和/或抗紫外线密封材料的产品标准(用于暴露密封的建筑密封打光和/或绝缘玻璃单元) Glass in building - Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
BS EN 1680-1997 塑料软管系统.聚乙烯(PE)管道系统用的阀门.弯曲力施加在工作机构上和之后的密封性的检验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
BS EN 1989-2000 热塑管道系统.地下埋装的非承压污水设施用连接件.通过对密封压力的估计对带热塑弹力密封件的连接件的长期密 Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
BS EN 210-2000 钢柱桶.最小总容积为216.5升的不可拆卸盖(密封盖)柱桶 Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l
BS EN 23369-1993 密封烧结金属材料和硬质合金.密度的测定 Impermeable sintered metal materials and hardmetals - Determination of density
BS EN 24003-1993 不密封烧结金属材料.气泡试验孔隙尺寸的测定 Permeable sintered metal materials - Determination of bubble test pore size
BS EN 2591-324-1998 电气和光学连接元件.试验方法.界面密封 Elements of electrical and optical connection - Test methods - Interfacial sealing
BS EN 2591-407-1999 光电连接件.试验方法.触点保持系统和密封件的耐久性 Elements of electrical and optical connection - Test methods - Durability of contact retention system and seals
BS EN 2591-512-2002 电器和光学连接元件.试验方法.密封连接器外壳不可拆卸固定的有效性 Elements of electrical and optical connection - Test methods - Effectiveness of non-removable fixing of hermetically sealed connector shell
BS EN 2591-6323-2002 航空航天系列.电气和光学连接元件.试验方法.光学元件.热冲击(密封装置) Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Thermal shock (Hermetically sealed devices)
BS EN 2591-6324-2002 电气和光学连接元件.试验方法.光学元件.层间的密封 Elements of electrical and optical connection - Test methods - Optical elements - Interfacial sealing
BS EN 2607-2005 航空航天系列.带锁紧螺纹接合器用O型密封圈.调查 Aerospace series - O-rings for adaptors, threaded, with lockring - Survey
BS EN 26927-1991 房屋建造.勾缝用品.密封剂.术语 Building construction - Jointing products - Sealants - Vocabulary
BS EN 279-1991 使用压力达200毫巴可燃气体的家用器具的动态密封件用均质橡胶材料规范 Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar
BS EN 28394-1991 房屋建筑.连接件.单组分密封剂挤压性测定 Building construction - Jointing products - Determination of extrudability of one-component sealants
BS EN 2881-2006 航空航天系列.耐蚀钢制钝化MoS2润滑双耳游动沉孔密封耐燃料性自锁托板螺母.等级:900MPa(室温)/120℃ Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C
BS EN 29048-1991 房屋建筑.连接件.使用标准化仪器测定密封剂挤压性 Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus
BS EN 291-1992 压力为200毫巴及其以下的家用可燃气体静态密封用橡胶密封件的材料规范 Rubber seals - Static seals in domestic appliances for combustible gas up to 200 mbar - Specification for material
BS EN 29885-1994 广口玻璃容器.顶部密封表面不平度.试验方法 Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods
BS EN 2997-005-2006 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 005: Hermetic square flange receptacle - Product standard
BS EN 2997-006-2006 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
BS EN 2997-007-2006 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard
BS EN 3081-2001 航空航天系列.钛合金管连接件8°30'.带动梁密封端头的修理用焊接箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules welded, with dynamic beam seal end, for repair
BS EN 3243-2001 航空航天系列.钛合金8°30'管连接件.带动力横梁密封端头的焊接环箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrule, welded, with dynamic beam seal end
BS EN 3269-2001 航空航天系列.钛合金管连接件8°30'.带动梁密封端头的暗箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules, blind, with dynamic beam seal end
BS EN 3272-2001 航空航天系列.8°30'钛合金管连接件.动态横梁密封端头的焊接箍.几何配置 Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for ferrule, welded - Geometric configuration
BS EN 3273-2001 航空航天系列.钛合金管连接件8°30'.弯头、十字管和三通管用动梁密封端头.几何配置 Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration
BS EN 3275-2002 航空航天系列.高达28000kPa的管连接 8 0'.动态横梁密封.米制系列.技术规范 Aerospace series - Pipe coupling 8 °30' up to 28000 kPa - Dynamic beam seal - Metric series - Technical specification
BS EN 331-1998 建筑物燃气供应设备用手动球阀和密封底部锥体旋塞阀 Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings
BS EN 3372-005-2007 航空航天系列.工作温度在-65°C到175°C或200°C连续温度下、带卡口连接的、防碰擦、中和高接触密度、圆形 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard
BS EN 3373-012-2005 航空航天系列.电导体压接用终端盒和内嵌式接头.第012部分:温度<150℃铜导体压接用绝缘和密封的内嵌式接头. Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 ℃ - Product standard
BS EN 3545-001-2005 航空航天系列.工作温度-5℃至175℃后部密封或非密封的、塑料壳体矩形连接器.技术规范 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures –55 ℃ to 175 ℃ — Part 001: Technical specification
BS EN 3545-002-2005 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.性能和接触安排的规范 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 002: Specification of performance and contact arrangements
BS EN 3545-003-2005 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.插孔接点的连接器.产品标准 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 003: Connectors with female contacts — Product standard
BS EN 3545-004-2005 工作温度-55℃至175℃后部密封或非密封的、塑料壳体锁紧装置的矩形电连接器.第004部分:带插塞触点的连接器. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ - Part 004: Connectors with male contacts - Product standard
BS EN 3545-005-2006 航空航天系列.工作温度-55℃~175℃的后部密封或非密封的、塑料壳锁定装置矩形电连接器.第005部分:无外壳( Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Male coding and attachment system for mounting on free housing (plug) - Product standard
BS EN 3545-006-2006 航空航天系列.工作温度-55℃~175℃的后部密封或非密封的、塑料壳锁定装置矩形电连接器.第006部分:固定外壳 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment system for fitment on fixed housing (receptacle) - Product standard
BS EN 3545-007-2005 航空航天系列.工作温度-55℃至175℃后部密封或非密封的、塑料壳体矩形连接器.产品标准 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 007: Cable clamp — Product standard
BS EN 3545-008-2006 航空航天系列.工作温度为-55℃~175℃后部密封或非密封的、塑料壳锁定装置矩形电连接器.编码的装配/移除工 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °CC - Tools for assembly/removal of coding and attachment systems - Product standard
BS EN 3561-2001 航空航天系列.钛合金管连接件8°30'.在管端焊接和变径的带动力横梁密封端头的环箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end
BS EN 3645-004-2006 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第004部分:方形法兰密封插 Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 004: Receptacle, hermetic, square flange mounting — Product standard
BS EN 3645-005-2006 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第005部分:brasage 安装圆 Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 005: Receptacle, hermetic, round flange, brasage mounting — Product standard
BS EN 3645-010-2006 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第010部分:防松螺母安装圆 Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 010: Receptacle, hermetic, round flange, jam nut mounting — Product standard
BS EN 3646-004-2006 航空航天系列.175℃~200℃工作温度圆形卡口耦合电连器.第004部分:锁紧螺母安装密封插件.产品标准 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 004: Receptacle, jam-nut mounting - Product standard
BS EN 3646-005-2006 航空航天系列.175℃~200℃工作温度圆形卡口耦合电连接器.第005部分:方形法兰安装密封插座.产品标准 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard
BS EN 3646-006-2006 航空航天系列.175℃~200℃工作温度圆形卡口耦合电器连器.第006部分:锁紧螺母安装密封插座.产品标准 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 006: Receptacle, hermetic jam-nut mounting - Product standard
BS EN 3646-007-2006 航空航天系列.175℃~200℃温度工作的圆形卡口耦合电连接器.第007部分:圆形法兰密封焊接或铜焊接的密封插座 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard
BS EN 3660-004-2006 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.EN 2997和EN 4067中带应变消除夹未密封笔直的A型电缆 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A , straight, unsealed with clamp strain relief for EN 2997 and EN 4067: Product standard
BS EN 3660-005-2006 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.EN 2997和EN 4067中带应变消除夹未密封的A型90°电缆 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A , 90 °, unsealed with clamp strain relief for EN 2997 and EN 4067: Product standard
BS EN 3660-009-2007 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.热缩(插头座)保护罩用密封、直的、J型电缆引出端.产品 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Cable outlet, style J , straight, sealed, for heat shrinkable boot - Product standard
BS EN 3746-2007 航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.硬度为80IRHD Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
BS EN 3747-2007 航空航天系列.氟硅酮橡胶(FVMQ)O型密封圈.技术规范 Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
BS EN 3867-2005 航空航天系列.管连接件、松套法兰和密封件.钛合金TI-P64001法兰 Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001
BS EN 3868-2005 航空航天系列.管连接件、松套法兰和密封件.钛合金TI-P64001焊接法兰连接件 Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001
BS EN 3869-2004 航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy
BS EN 4054-2004 航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳.技术规范 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification
BS EN 415-3-2000 包装机械的安全性.成型,填充和密封机械 Safety of packaging machines - Form, fill and seal machines
BS EN 4529-001-2006 航空航天系列.电气及光学连接元件.密封塞子.技术规范 Aerospace series - Elements of electrical and optical connection - Sealing plugs - Technical specification
BS EN 4529-002-2006 航空航天系列.电气和光学连接元件.密封塞.产品标准索引 Aerospace series - Elements of electrical and optical connection - Sealing plugs - Index of product standards
BS EN 4529-003-2006 航空航天系列.电气及光学连接元件.密封塞.T级产品标准 Aerospace series - Elements of electrical and optical connection - Sealing plugs - Class T. Product standard
BS EN 4530-001-2006 航空航天系列.连接部件用密封套.技术规范 Aerospace series - Sealing sleeves used in elements of connection - Technical specification
BS EN 4530-002-2006 航空航天系列.连接元件用密封套.密封套的列表和使用 Aerospace series - Sealing sleeves used in elements of connection - List and utilization of sealing sleeves
BS EN 4530-005-2006 航空航天系列.连接部件用密封套.第005部分:3mm~4.1mm外直径电缆用密封套.产品标准 Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm - Product standard
BS EN 4530-006-2006 航空航天系列.连接部件用密封套.第006部分:4.68mm~5.05mm外直径电缆用密封套.产品标准 Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard
BS EN 4550-1-2003 航空航天系列.37度管连接件.设计造型.英制.凸形密封球端 Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Male sealing ends, spherical
BS EN 4550-4-2003 航空航天系列.37度管连接件.设计造型.英制.管的承口密封端 Aerospace series - Pipe coupling 37 °. Design configuration - Inch series - Female sealing ends
BS EN 464-1994 防护服.对包括气溶液体和固体粒子的液体和气体化学物质的防护.试验方法.气体密封服的密封性测定(内压力试验 Protective clothing - Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles - Test method - Determination of leak-tightness of gas-tight suits (Internal Pressure Test)
BS EN 50216-3-2002 电力变压器和反应堆配件.密封的液浸变压器和无气垫反应堆用保护继电器 Power Transformer and reactor fittings - Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion
BS EN 50262-1999 电气设备用米制电缆密封装置 Cable glands for electrical installations
BS EN 50411-2-2-2007 用于光纤传递系统的纤维形成体和闭路.产品规范.S&A类密封平盖纤维接缝闭路类型1 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Sealed pan fibre splice closures Type 1, for category S & A
BS EN 50411-2-4-2006 用于光纤通信系统的纤维形成体和闭路.产品规范.S&A类1型密封圆盖纤维接缝闭路 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Sealed dome fibre splice closures type 1, for category S & A
BS EN 541-2006 铝和铝合金.金属罐、密封物和盖子用轧制品.规范 Aluminium and aluminium alloys — Rolled products for cans, closures and lids — Specifications
BS EN 549-1995 燃气器具和设备密封件和隔膜用橡胶材料规范 Specification for rubber materials for seals and diaphragms for gas appliances and gas equipment
BS EN 60068-2-17-1995 环境试验.试验方法.试验Q 密封 Environmental testing - Test methods - Test Q. Sealing
BS EN 60191-6-8-2001 半导体器件的机械标准化.表面安装半导体器件封装外形图绘制一般规则.玻璃密封陶瓷方型扁平封装设计指南 Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed ceramic quad flatpack (G-QFP)
BS EN 60286-4-1998 自动控制用元件的封装.E和G型封装件中密封电子元件用粘结自动送料装置 Packaging of components for automatic handling - Stick magazines for electronic components encapsulated in packages of form E and G
BS EN 60512-12-6-1997 电子设备用机电元件.基本试验规程和测量方法.钎焊性试验. 试验12f:机械钎焊焊接过程中溶剂和清洗剂密封性 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Soldering tests - Test 12f - Sealing against flux and cleaning solvents in machine soldering
BS EN 60512-14-2-2006 电子设备用连接器.试验和测量.密封试验.试验14b.密封.细微的漏气 Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14b - Sealing - Fine air leakage
BS EN 60512-14-4-2006 电子设备用连接器.试验和测量.密封试验.试验14d.浸入.防水 Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14d - Immersion - Waterproof
BS EN 60512-14-5-2006 电子设备连接器.试验和测量.密封试验.试验14e.低气压下浸渍 Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14e - Immersion at low air pressure
BS EN 60512-14-6-2006 电子设备用连接器.试验和测量.密封试验.试验14f.界面间的密封 Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14f - Interfacial sealing
BS EN 60512-14-7-1998 电子设备用机电元件.基本试验规程和测量方法.密封试验.试验14g:水冲击 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Sealing tests - Test 14g - Impacting water
BS EN 60622-2003 含碱性或其它非酸性电解液的蓄电池和蓄电池组.密封镍镉棱柱形可充电单体电池 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
BS EN 60730-2-4-1993 家用和类似用途自动电气控制装置规范.特殊要求.密封和半密封型电动机压缩机组的电动机热保护器 Specification for automatic electrical controls for household and similar use - Particular requirements - Thermal motor protectors for motor-compressors of hermetic and semi-hermetic type - Section 4: Thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
BS EN 60749-8-2003 半导体器件.机械和气候试验方法.密封 Semiconductor devices - Mechanical and climatic test methods - Sealing
BS EN 61150-1994 碱性蓄电池.小型电池设计用密封镍镉单块可充电电池 Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design
BS EN 61300-2-23-1997 光纤互联装置和无源部件.基本试验和测量程序.光纤设备无增压闭路密封试验 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing for non-pressurized closures of fibre optic devices
BS EN 61300-2-25-1997 光纤互联装置和无源部件.基本试验和测量步骤.试验.闭合用密封强度 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing endurance for closures
BS EN 61300-2-38-2006 纤维光学互连器件和无源元件.基本试验和测量程序.第2-38部分:试验.加压纤维光学器件外壳的密封 Fibre optic interconnecting devices and passive components — Basictest and measurement procedures — Part 2-38: Tests — Sealing forpressurized fibre optic closures
BS EN 61857-22-2002 电绝缘系统.热评定规程.密封圈型的特殊要求.绕线电绝缘系统(EIS) Electrical insulation systems - Procedures for thermal evaluation - Specific requirements for encapsulated-coil model - Wire-wound electrical insulation system (EIS)
BS EN 61951-1-2003 含碱性或其它非酸性电解质的蓄电池和蓄电池组.便携式密封可再充电单电池.镍镉电池 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Nickel-cadmium
BS EN 61951-2-2003 含碱性或其它非酸性电解质的蓄电池和蓄电池组.便携式密封可再充电单电池.镍金属氢化物电池 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Nickel-metal hydride
BS EN 61959-2004 含碱性或其他非酸性电解质的二次电池和蓄电池.密封的便携式二次电池和蓄电池的机械试验 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
BS EN 62133-2003 含碱性或其它非酸性电解液的副电池和蓄电池.便携式密封副电池和由它们制成的便携式蓄电池的安全要求 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
BS EN 62339-1-2007 表面安装流体分配部件用模块元部件接口.弹性密封件 Modular component interfaces for surface-mount fluid distribution components - Elastomeric seals
BS EN 624-2000 专用液化石油气器具规范.车辆和小船中安装的房间用密封式液化石油气空间加热设备 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 681-1-1996 弹性密封件.水和污水排放设施用管联接密封件的材料要求.硫化橡胶 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Vulcanized rubber
BS EN 681-2-2000 弹性密封件.输水和排水用管联接密封件材料要求.热塑性弹性体 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
BS EN 681-3-2000 弹性密封件.输水和排水设施用管联接密封件的材料要求.硫化橡胶的多孔材料 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications water and drainage applications - Vulcanized rubber
BS EN 681-4-2000 弹性密封件.输水和排水设施用管联接密封件的材料要求.聚氨酯铸造密封元件 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Cast polyurethane sealing elements
BS EN 682-2002 弹性密封件.运送气体和液态碳氢化合物的管件及配件中用的密封件的材料要求 Elastomeric seals - Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
BS EN 713-1995 塑料管道系统.管件和聚烯烃压力管的机械连接.组件承受弯曲作用时内部压力密封性的试验方法 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
BS EN 714-1995 热塑管道系统.压力管和模塑管件的无端负荷弹性密封环型连接件.在无轴向推力时内部流体静压力下密封性的试验 Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust
BS EN 715-1995 热塑管道系统.小直径压力管和配件间端部负荷轴承接头.在包含端推力的内部水压下密封性的试验方法 Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
BS EN 751-1-1997 与第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.厌氧密封剂 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Anaerobic jointing compounds
BS EN 751-2-1997 与第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.非硬化密封剂 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Non-hardening jointing compounds
BS EN 751-3-1997 第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.非烧结PTFE密封带. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Unsintered PTFE tapes
BS EN 803-1995 塑料管道系统.压力管道的弹性密封圈式连接件用注模制热塑塑料性配件.耐无部端推力的快速内压的试验方法 Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
BS EN 868-10-2000 准备消毒的医疗装置用的包装材料和系统.用于生产热密封袋,卷轴和合盖的粘接剂包覆的非纺织的聚烯烃材料.要 Packaging materials and systems for medical devices which are to be sterilized - Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
BS EN 868-5-1999 消毒的医疗设备用包装材料和系统.纸和塑料薄膜制的热和可自密封袋及卷绕材料.要求和试验方法 Packaging materials and systems for medical devices which are to be sterilized - Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
BS EN 868-7-1999 准备消毒的医疗设备用的包装材料和系统.经环氧乙烷或辐射消毒的生产医用热密封包裹的粘性涂覆纸.要求和试验 Packaging materials and systems for medical devices which are to be sterilized - Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods
BS EN 868-9-2000 准备消毒的医疗装置用的包装材料和系统.用于生产热密封袋,卷轴和合盖的非包敷的非纺织聚烯烃材料.要求和试 Packaging materials and systems for medical devices which are to be sterilized - Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
BS EN 911-1996 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部流体静压条件下防漏密封试验方法 Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
BS EN 917-1997 塑料管道系统.热塑阀门.抗内压和泄漏密封性的试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
BS EN 943-1-2002 耐液体和气体药液、气溶胶和固体粒子腐蚀的防护服.通风和不通风的气体密封(类型1)和非气体密封(类型2)化学 Protective clothing against liquid and gaseous chemicals, aerosols and solid particles - Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical protective suits
BS EN ISO 10563-2005 房屋建筑.密封胶.质量和体积变化的测定 Building construction - Sealants - Determination of change in mass and volume
BS EN ISO 10590-2005 房屋建筑.密封胶.浸水后保持延伸时密封胶拉伸性能的测定 Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water
BS EN ISO 10591-2005 房屋建筑.密封胶.浸水后密封胶粘结/粘合性能的测定 Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water
BS EN ISO 11431-2002 房屋建筑.粘结产品.测定密封剂在暴露于热、水和透过玻璃的人造光线后密封剂的粘着/结合特性 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
BS EN ISO 11432-2005 房屋建筑.密封胶.抗压性测定 Building construction - Sealants - Determination of resistance to compression
BS EN ISO 11600-2003 房屋建筑.连接产品.密封胶的分类和要求 Building construction - Jointing products - Classification and requirements for sealants
BS EN ISO 11607-2-2006 终端无菌医学设备的包装.组成、密封和装配过程的确认要求 Packaging for terminally sterilized medical devices - Validation requirements for forming, sealing and assembly processes
BS EN ISO 13783-1998 塑料管道系统.硬聚氯乙烯(PVC-U)端部承受负荷的双承口连接件.密封和承受弯曲内压的试验方法 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure
BS EN ISO 13844-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下的密封性试验方法 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
BS EN ISO 13845-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
BS EN ISO 13846-2001 塑料管道系统.热塑性压力管用端负载和无端负载支承组件和接头.内部水压下长期密封性的试验方法 Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure
BS EN ISO 14593-1999 水质 水介质中有机化合物最大需氧生物降解能力的评价.密封容器中无机碳分析法(CO2顶空试验) Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test)
BS EN ISO 15783-2003 无密封旋转动力泵.II级.规范 Seal-less rotodynamic pumps - Class II - Specification
BS EN ISO 16433-2006 电阻焊接.无涂覆和涂覆的低碳钢密封焊接用程序 Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels
BS EN ISO 228-1-2003 非螺纹密封连接的管螺纹.尺寸、公差和、名称 Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation
BS EN ISO 228-2-2003 非螺纹密封连接的管螺纹.用极限量规检验 Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges
BS EN ISO 483-2006 塑料.使用水溶液进行调节和试验保持恒定湿度的小型密封容器 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value
BS EN ISO 6149-1-2007 用于液压传动和一般用途的管接头.带ISO261米制螺纹和O形密封圈的端口和螺纹端头.O形密封用平切壳体端口 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Ports with truncated housing for O-ring seal
BS EN ISO 6149-2-2007 液压流体传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的油口和螺纹端头.重型(S系列)螺柱端头的尺 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for heavy-duty (S series) stud ends
BS EN ISO 6149-3-2007 液压流体传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的油口和螺纹端头.轻型(L系列)螺柱端头的尺 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for light-duty (L series) stud ends
BS EN ISO 6876-2002 牙科牙根管密封材料 Dental root canal sealing materials
BS EN ISO 7389-2003 房屋建筑.连接件.密封件回弹性的测定 Building construction - Jointing products - Determination of elastic recovery of sealants
BS EN ISO 7390-2004 房屋建筑.连接件.密封剂的耐流动性测定 Building construction - Jointing products - Determination of resistance to flow of sealants
BS EN ISO 8339-2005 房屋建筑.密封件.拉伸性能的测定(延展至断裂) Building construction - Sealants - Determination of tensile properties (extension to break)
BS EN ISO 8340-2005 房屋建筑.密封件.保持延伸状态时拉伸性能的测定 Building construction - Sealants - Determination of tensile properties at maintained extension
BS EN ISO 9046-2005 建筑施工.连接产品.恒温下密封剂的粘附/粘结性能的测定 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
BS EN ISO 9047-2003 房屋建筑.接缝物品.变温下密封胶粘结力/内聚力的测定 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures
BS EN ISO 9222-1-1995 技术制图.动态密封应用.第1部分:简化画法 Technical drawings - Seals for dynamic application - General simplified representation
BS EN ISO 9222-2-1995 技术制图.动态密封应用.详细简化画法 Technical drawings - Seals for dynamic application - Detailed simplified representation
BS EN ISO 9974-1-2000 普通和液压传动用联接件.用ISO 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.螺纹气门 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Threaded ports
BS EN ISO 9974-2-2000 普通和液压传动用联接件.用ISO 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.(E型)弹性密封的双头螺 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E)
BS EN ISO 9974-3-2000 普通和液压用联接结件.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.(B型)金属与金属间密封 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B)
BS F 159-2006 用符合BS F 153抗油硅橡胶材料制成的弹性环形密封圈("O"形圈)特性.规范 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from oil resistant silicone rubber material conforming to BS F 153 - Specification
BS F 162-2006 用符合BS F 156二元乙丙橡胶材料制成的弹性环形密封圈("O"形圈)特性.规范 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from ethylene-propylene rubber material conforming to BS F 156 - Specification
BS F 164-2006 用符合BS F 154氟硅橡胶材料制成的弹性环形密封圈("O"形圈)的特性.规范 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from fluorosilicone rubber material released to BS F 154 - Specification
BS G 228-1981 航空用两极和四极密封2A和3A电磁继电器的间隙和固定尺寸规范 Specification for clearance and fixing dimensions for 2 A and 3 A, two- and four-pole sealed electromagnetic relays for aircraft
BS HC 404-1977 铬-钼合金铸件铁环形坩埚(适用于离心铸造和砂型铸造密封环、活塞环和汽缸套筒) Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)
BS ISO 10295-1-2007 建筑单元和构件的燃烧试验.服务设施的燃烧测试.渗透密封 Fire tests for building elements and components - Fire testing of service installations - Penetration seals
BS ISO 11933-3-1999 密封箱室部件.第3部分:转运装置如简易门、气闸室、双开门用传送系统和废物桶密封连接件 Components for containment enclosures - Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums
BS ISO 12151-1-1999 液压流体力学和一般用途的连接件.软管配件.有ISO 8434-3 O型环对接密封端的软管组件 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends
BS ISO 12472-2003 木制门组件的耐火性.膨胀型密封剂工效的测定方法 Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
BS ISO 12925-1-1998 润滑剂、工业用油及相关产品(L类).C系列(齿轮).第1部分:密封式齿轮系统用润滑剂规范 Lubricants, industrial oils and related products (class L) - Family C (Gears) - Specifications for lubricants for enclosed gear systems
BS ISO 14656-2000 混凝土加筋钢涂层用环氧树脂粉末和密封材料 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
BS ISO 15705-2002 水质.化学需氧量的测定(ST-COD).小型密封管法 Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
BS ISO 15750-2-2002 包装.钢筒.最小总容量为 212升、216,5 升和 230 升的密封盖圆筒 Packaging - Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l
BS ISO 15750-3-2002 包装.钢筒.插入法兰型密封系统 Packaging - Steel drums - Inserted flange-type closure systems
BS ISO 15838-2004 船舶与海上技术.管道设施中使用的带密封衬垫的机械耦合配件.性能规范 Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications - Performance specification
BS ISO 16132-2004 球墨铸铁管和配件.水泥灰浆衬套的密封涂层 Ductile iron pipes and fittings - Seal coats for cement mortar linings
BS ISO 16589-1-2002 含热塑性密封元件的旋转轴唇型密封件.公称尺寸和公差 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Nominal dimensions and tolerances
BS ISO 16589-2-2002 含热塑性密封元件的旋转轴唇型密封件.词汇 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Vocabulary
BS ISO 16589-3-2002 含热塑性密封元件的旋转轴唇型密封件.储存、搬运和安装 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Storage, handling and installation
BS ISO 16589-4-2002 含热塑性密封元件的旋转轴唇型密封件.性能试验程序 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Performance test procedures
BS ISO 16589-5-2002 含热塑性密封元件的旋转轴唇型密封件.目视缺陷的标识 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Identification of visual imperfections
BS ISO 18185-1-2007 货运集装箱.电子密封.通信规程 Freight containers - Electronic seals - Communication protocol
BS ISO 18185-2-2007 货运集装箱.电子密封.应用要求 Freight containers - Electronic seals - Application requirements
BS ISO 18185-3-2006 货运集装箱.电子密封.环境特征 Freight containers - Electronic seals - Environmental characteristics
BS ISO 18185-4-2007 货运集装箱.电子密封.数据保护 Freight containers - Electronic seals - Data protection
BS ISO 18185-5-2007 货运集装箱.电子密封.物理层 Freight containers - Electronic seals - Physical layer
BS ISO 18916-2007 成像材料.处理过的成像材料.密封材料的摄影活性试验 Imaging materials - Processed imaging materials - Photographic activity test for enclosure materials
BS ISO 19921-2006 船舶和海上技术.带有回弹性和弹性密封件的耐火金属管道组件.试验方法 Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods
BS ISO 19922-2006 船舶和海上技术.带回弹性和弹性密封件的金属管道组件的耐火性.试验台的要求 Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements on the test bench
BS ISO 20848-2-2007 包装.塑料桶.标称容量208.2 L和220 L的固定盖(密封盖)圆桶 Packaging - Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l
BS ISO 3069-2001 端吸离心泵.机械密封和软密封件密封腔尺寸 End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing
BS ISO 4928-2006 道路车辆.使用非石油基液制动液的液压制动系统液压缸的弹性皮碗和密封圈(最高工作温度120℃) Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
BS ISO 4930-2006 道路车辆.非石油基液压制动液的液压制动盘式液压缸用弹性密封垫(最高工作温度150℃) Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.)
BS ISO 6118-2006 道路车辆.使用非石油基制动液的液压制动促动缸的弹性皮碗和密封圈(最高工作温度70℃) Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
BS ISO 6149-4-2006 用于流体传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的油口和螺纹端头.内外六角端口栓塞的尺寸、 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions, design, test methods and requirements for external and internal hex port plugs
BS ISO 6194-4-1999 旋转轴唇型密封件.性能试验程序 Rotary shaft lip type seals - Performance test procedures
BS ISO 6547-2002 液压传动.缸筒.装有支撑环的活塞密封沟槽.尺寸和公差 Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances
BS ISO 7425-1-2002 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞密封汽缸 Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings
BS ISO 7425-2-2002 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞杆密封汽缸 Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings
BS ISO 8434-3-2005 用于液压传动和一般用途的金属管接头.O形圈端面密封管接头 Metallic tube connections for fluid power and general use - O-ring face seal connectors
BS ISO 9631-2004 橡胶密封件.温度为110℃及以下的热水供给、排水和污水管道用连接环.材料规范 Rubber seals - Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C - Specifications for the material
BS ISO 9974-4-2006 一般用途和流体动力用连接件.带弹性体密封件或金属对金属密封件的ISO 261螺纹的孔口和螺柱端.内外六角气门 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Dimensions, design, test methods and requirements for external hex and internal hex port plugs
BS ISO TR 3313-1998 密封管道中液体流量的测量.脉动流动对流量测量仪器影响的指南 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
BS M 48-1975 航空般天用弹性环形密封圈尺寸规范(英制系列) Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series
BS SP 122 to 125-1958 航空用统一六角垫圈(主要是密封用) Washers for Unified hexagons for aircraft (primarily for packing purposes)
BS SP 13-1949 航空用垫圈规范(主要是密封用) Specification for washers for aircraft purposes (primarily for packing purposes)
DD 195-1-1991 水力连接器.第1部分:流体动力系统用连接器端口螺纹及其密封件的试验方法 Hydraulic couplings. Method of test for coupling port threads and their seals intended for use in fluid power systems
DD ENV 1992-1-4-1996 欧洲规程2:混凝土结构的设计.总则.密封结构的轻重聚集混凝土(与英国的应用文件一起使用) Eurocode 2: Design of concrete structures. General rules. Lightweight aggregate concrete with closed structure (together with United Kingdom National Application Document)
HB 10176-1999 IFSA规范.防火用密封孔和防火焰扩散 The IFSA Code - Sealing apertures and service penetrations to maintain fire resistance
M 33-1970 飞机用一类公差弹性环形密封圈尺寸(英制)规范 Specification for dimensions of elastomeric toroidal sealing rings (inch series) to Class 1 tolerances for aircraft
编号中文名称英文名称

返回