5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




英国阀标准(BS valve standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
BS 10-1962 管子、阀门和配件用法兰和螺栓连接规范 Specification for flanges and bolting for pipes, valves, and fittings
BS 1010-2-1973 供水设备(旋压式)用放水旋阀和截止阀规范.第2部分:放水旋阀和地面上截止阀 Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves
BS 1212-1-1990 浮子阀.第1部分:活塞式浮子阀(铜合金阀体)(不含浮子)规范 Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212-2-1990 浮子阀.第2部分:隔膜式浮子阀(铜合金阀体)(不含浮子)规范 Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
BS 1212-3-1990 浮子阀.第3部分:仅供冷水用隔膜型塑料体浮子操作阀(不包括浮子) Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
BS 1212-4-1991 浮子阀.第4部分:厕所冲水箱用小型浮子阀规范(包含浮子) Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats)
BS 1552-1995 压力可达200毫巴家庭用一类、二类和三类燃气敞口底部锥形旋塞阀规范 Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
BS 1560-3.2-1990 管子、阀门和接头(规定等级)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第2节:铸铁法兰规范 Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges
BS 1655-1950 过程控制工业用法兰连接自动控制阀(面至面尺寸)规范 Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
BS 1868-1975 石油、石化及联合企业用钢制单向阀(有法兰及对焊端)规范 Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1873-1975 石油、石化及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范 Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1968-1953 球阀用浮球(铜)规范 Specification for floats for ballvalves (copper)
BS 2456-1990 冷水设备用浮子操作阀的浮子(塑料制品)规范 Specification for floats (plastics) for float operated valves for cold water services
BS 2767-1991 散热器用手动控制铜合金阀的规范 Specification for manually operated copper alloy valves for radiators
BS 2782-11 Method 1108A-1989 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1108A:管界面限定碰撞率 Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes
BS 2782-11 Method 1109A-1989 塑料试验方法.第11部分:热塑性塑料、接头和阀门.试验方法1109A:非承压聚乙烯管和接头耐坏境应力开裂性 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
BS 2782-11 Method 1110-1989 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1110:非承压聚氯乙烯槽形管哑铃状试样的抗拉性能 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications
BS 2782-11 Method 1121B-1997 塑料的试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121B:额定外部直径和额定压力.米 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series
BS 2782-11 Method 1121C-1997 塑料试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121C:额定外部直径和额定压力.英尺 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series
BS 2782-11 Method 1121H-1996 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1121H:非承压液体输送热塑性塑料管.管头损失计算 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses
BS 2782-11 Method 1127P-1997 塑料试验方法.第11部分:热塑管,接头和阀门.液体输送用热塑材管.试验方法1127P:抗内压力.试验方法 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes, for the conveyance of fluids - Resistance to internal pressure - Test method
BS 2782-11 Method 1150B-1998 塑料试验方法.第11部分:热塑管,接头和阀门.塑料管道和配件.试验方法1150D:对接熔融法聚乙烯(PE)管/管或管道 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS 2782-11 Method 1150E-1997 塑料试验方法.第11部分:热塑性塑料管,接头和阀门.试验方法1150E:塑料管和配件.聚乙烯管和电熔融接头间试件 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS 2S 111-1964 飞机材料规范.镍铬钨阀门钢 Specification for aircraft material - Nickel-chromium-tungsten valve steel
BS 341-3-2002 可运输气体容器的阀门.阀门出口接头 Transportable gas container valves - Valve outlet connections
BS 341-4-2004 可运输气体容器的阀门.减压装置 Transportable gas container valves - Pressure relief devices
BS 3457-1973 水龙头与截止阀座垫圈材料规范 Specification for materials for water tap and stopvalve seat washers
BS 3727-1-1966 电子管和电子阀用镍的分析方法.第1部分:铝含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method)
BS 3727-10-1964 电子管和电子阀用镍的分析方法.第10部分:0.020-0.25%硅含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method)
BS 3727-11-1965 电子管和电子阀用镍的分析方法.第11部分:0.001-0.020%硅含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method)
BS 3727-12-1970 电子管和电子阀用镍的分析方法.硫含量测定(燃烧法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method)
BS 3727-13-1965 电子管和电子阀用镍的分析方法.第13部分:钛含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method)
BS 3727-14-1964 电子管和电子阀用镍的分析方法.第14部分:钨含量测定(重量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method)
BS 3727-15-1968 电子管和电子阀用镍的分析方法.第15部分:锌含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method)
BS 3727-16-1966 电子管和电子阀用镍的分析方法.第16部分:化合镁和游离镁含量测定 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of combined and free magnesium
BS 3727-2-1968 电子管和电子阀用镍的分析方法.第2部分:硼含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method)
BS 3727-20-1966 电子管和电子阀用镍的分析方法.第20部分:光谱法 Methods for the analysis of nickel for use in electronic tubes and valves - Spectrographic method
BS 3727-21-1966 电子管和电子阀用镍的分析方法.第21部分:镁含量测定(原子吸收法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method)
BS 3727-3-1966 电子管和电子阀用镍的分析方法.第3部分:碳含量测定 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of carbon
BS 3727-4-1964 电子管和电子阀用镍的分析方法.第4部分:铬含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method)
BS 3727-5-1964 电子管和电子阀用镍的分析方法.第5部分:钴含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method)
BS 3727-6-1964 电子管和电子阀用镍的分析方法.第6部分:铜含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method)
BS 3727-7-1964 电子管和电子阀用镍的分析方法.第7部分:铁含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method)
BS 3727-8-1964 电子管和电子阀用镍的分析方法.第8部分:锰含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method)
BS 3727-9-1967 电子管和电子阀用镍的分析方法.第9部分:镁含量测定(光度测量法) Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method)
BS 4062-2-1990 液压动力系统阀门.第2部分:性能测定方法 Valves for hydraulic fluid power systems - Methods for determining performance
BS 4151-1967 输入信号为 3至15磅/平方英寸(压力计)的气动阀定位器的评定方法 Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge)
BS 4319-1-1968 电子管和电子阀(包括微波器件)电气特性测量方法.第1部分:测量等效输入和输出导纳的基本条件 Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances
BS 5041-1-1987 消防栓系统设备.第1部分:湿式水嘴接地阀规范 Fire hydrant systems equipment - Specification for landing valves for wet risers
BS 5041-2-1987 消防栓系统设备.第2部分:干式水嘴接地阀规范 Fire hydrant systems equipment - Specification for landing valves for dry risers
BS 5041-4-1975 消防栓系统设备.第4部分:干式水嘴用接地阀箱规范 Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers
BS 5158-1989 铸铁旋塞阀规范 Specification for cast iron plug valves
BS 5159-1974 通用铸铁和碳钢球阀规范 Specification for cast iron and carbon steel ball valves for general purposes
BS 5163-1-2004 水厂用阀.主要键操作的铸铁闸阀.操作规范 Valves for waterworks purposes - Predominantly key-operated cast iron gate valves - Code of practice
BS 5163-2-2004 水厂用阀.隔离阀和相关控水设备用船首柱冠板.规范 Valves for waterworks purposes - Stem caps for use on isolating valves and associated water control apparatus - Specification
BS 5353-1989 钢塞阀规范 Specification for steel plug valves
BS 5433-1976 供水用地下闸阀规范 Specification for underground stopvalves for water services
BS 5672-1991 往复式内燃机汽缸头的汽缸和阀旋转方向标示和左、右单列发动机定义的规范 Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
BS 5793-4-1987 工业过程控制阀.第4部分:检验和例行试验规范 Industrial-process control valves - Specification for inspection and routine testing
BS 5944-4-1984 液压动力系统和部件空气噪音测量.第4部分:流量和压力控制阀声功率级测定方法 Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure
BS 5998-1983 钢阀铸件的质量级规范 Specification for quality levels for steel valve castings
BS 6023-1980 自动疏水阀的技术术语词汇 Glossary of technical terms for automatic steam traps
BS 6282-1-1982 防止回流水污染用带动件装置.第1部分:公称尺寸小于等于DN54的单向阀规范 Devices with moving parts for the prevention of contamination of water by backflow - Specification for check valves of nominal size up to and including DN 54
BS 6282-2-1982 防止回流水污染用带动件装置.第2部分:公称尺寸小于等于DN54的终端反压力阀规范 Devices with moving parts for the prevention of contamination of water by backflow - Specification for terminal anti-vacuum valves of nominal size up to and including DN 54
BS 6282-4-1982 防止回流水污染用带动件装置.第4部分:公称尺寸小于等于DN42的组合单向阀和反压力阀规范 Devices with moving parts for the prevention of contamination of water by backflow - Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42
BS 6283-2-1991 热水系统安全控制装置.第2部分:压力范围从1bar到10bar的温度减压阀规范 Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-4-1991 热水系统中安全控制装置.第4部分:最大供给压力不超过12bar、标准尺寸不超过DN50的放松减压阀规范 Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar
BS 6290-4-1997 铅酸固定电池和电池组.阀门调节类型分类规范 Lead-acid stationary cells and batteries - Specification for classifying valve regulated types
BS 6364-1984 制冷设备用阀门规范 Specification for valves for cryogenic service
BS 6675-1986 供水设备用供水阀门(铜合金)规范 Specification for servicing valves (copper alloy) for water services
BS 6683-1985 阀门安装和使用指南 Guide to installation and use of valves
BS 7016-3-1988 往复式内燃机部件和系统.第3部分:阀门、凸输轴传动和驱动机构的术语词汇 Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms
BS 7296-1-1990 液压动力卡盘式阀的空腔.第1部分:二通镶套滑动阀规范 Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves
BS 7350-1990 加热和冷却水系统用双调节球形阀和流量测量装置规范 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
BS 7403-2-1998 内燃机满液流润滑油过滤器.元件分支阀特性试验方法 Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics
BS 7403-9-1995 内燃机用全流式润滑油过滤器.入口和出口防泄油阀试验方法 Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves
BS 7438-1991 弹簧加载型钢和铜合金单盘压片止回阀规范 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 7461-1991 装有流量调节器、闭路开关检验、闭合位置指示开关或气流量控制器电动式气体自动关闭阀规范 Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS 7478-1991 恒温散热器阀的选择和使用指南 Guide to selection and use of thermostatic radiator valves
BS 759-1-1984 锅炉与锅炉连接管路用阀门、水位计及其它安全管件.第1部分:阀门、安装件和管件规范 Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings
BS 7942-2000 检修机构用恒温混合阀 Thermostatic mixing valves for use in care establishments
BS AU 50-3.1e-2002 轮胎和车轮.阀门.尺寸、名称与符号、使用中阀门压力等级和夹紧阀门扭矩 Tyres and wheels - Valves - Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves
BS C 22-1995 航空用内胎轮胎和无内胎轮胎阀的试验方法.气门芯和帽 Test methods for aircraft inner tube and tubeless tyre valves - Cores and caps
BS C 9-1970 航空用高压充气阀连接尺寸规范 Specification for coupling dimensions for high pressure air charging valves for aircraft
BS EN 10090-1998 内燃机用阀门钢和合金 Valve steels and alloys for internal combustion engines
BS EN 1074-1-2000 供水用阀门.对目的要求的符合性及合适的验证试验.一般要求 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - General requirements
BS EN 1074-2-2000 供水用阀门.对目的要求的符合性及合适的验证试验.截止阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Isolating valves
BS EN 1074-3-2000 供水用阀门.对目的要求的符合性及合适的验证试验.止回阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves
BS EN 1074-4-2000 供水系统用的阀门.产品与用途要求的适用性和合适的验证试验.空气阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Air valves
BS EN 1074-5-2001 供水阀门.与用途要求的适用性和合适的验证试验.控制阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves
BS EN 1074-6-2004 供水用阀门.目的要求和适当检定试验的合理性.给水栓 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Hydrants
BS EN 1092-1-2002 法兰及其连接.按PN标示的管、阀门、配件和附件用的圆形法兰.钢法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Steel flanges
BS EN 1092-2-1997 法兰及其连接.按PN标注的管、阀门、管接头和附件的圆形安装法兰.第2部分:铸铁法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges
BS EN 1092-3-2004 法兰及其连接件.标注PN的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges
BS EN 1092-4-2002 法兰及其连接件.按PN标注的管道、阀门、配件和附件用圆形法兰.铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges
BS EN 1111-1999 卫生用具龙头.恒温混合阀(PN10).一般技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
BS EN 1171-2002 工业阀门.铸铁闸阀 Industrial valves - Cast iron gate valves
BS EN 12050-4-2001 建筑物和工地用废水处理设备.施工和试验规则.不含粪便和含有粪便的废水用止回阀 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Non-return valves for faecal-free wastewater and wastewater containing faecal matter
BS EN 12094-13-2001 固定消防系统.气体灭火系统元件.止回阀和非止回阀试验方法和要求 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for check valves and non-return valves
BS EN 12094-4-2004 固定式消防系统.气体灭火系统用元件.容器阀组件及其传动器的要求和试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for container valve assemblies and their actuators
BS EN 12100-1998 塑料管道系统.聚乙稀(PE)阀门.阀座间抗弯曲性的试验方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
BS EN 12106-1998 塑料管道系统.聚乙稀(PE)阀门.挤压后抗内压力的试验方法 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
BS EN 12107-1998 塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
BS EN 12117-1998 塑料管道系统.管件、阀门和附件.气体流速与压降之间关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
BS EN 12119-1997 塑料管道系统.聚乙烯(PE)阀.耐力热循环抗性的测试方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
BS EN 1213-2000 建筑物阀门.建筑物内饮水供水用的铜合金断流阀.试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
BS EN 12201-4-2002 供水用塑料管道系统.聚乙烯.阀门 Plastic piping systems for water supply - Polyethylene (PE) - Valves
BS EN 12259-2-1999 固定灭火系统.喷洒器和喷水系统元部件.报警湿阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Wet alarm valve assemblies
BS EN 12259-3-2000 固定灭火系统.喷洒器和喷水系统用元部件.报警干阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Dry alarm valve assemblies
BS EN 12266-1-2003 工业用阀门.阀门试验.压力试验、试验规程和验收标准.强制要求 Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements
BS EN 12266-2-2002 工业用阀门.阀门试验.试验、试验规程和验收标准.补充要求 Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
BS EN 12284-2003 冷却系统和加热泵.阀.要求、试验及标记 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
BS EN 12288-2003 工业用阀.铜合金闸阀 Industrial valves - Copper alloy gate valves
BS EN 12334-2001 工业阀门.铸铁单向阀门 Industrial valves - Cast iron check valves
BS EN 12351-1999 工业阀门.带法兰连接的阀门保护帽 Industrial valves - Protective caps for valves with flanged connections
BS EN 12380-2002 排水系统用进气阀.要求、试验方法和合格评定 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity
BS EN 12514-2-2000 油燃烧器供油系统的安装.安全性要求和试验.部件、阀门、管道、过滤器、油空气分离器、油量计 Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
BS EN 12516-1-2005 工业阀门.外壳设计强度.钢制阀门外壳的列表法 Industrial valves - Shell design strength - Tabulation method for steel valve shells
BS EN 12516-2-2004 工业阀门.外壳设计强度.钢制阀门外壳的计算方法 Industrial vales - Shell design strength - Calculation method for steel valve shells
BS EN 12516-3-2002 阀门.外壳设计强度.实验方法 Valves - Shell design strength - Experimental method
BS EN 12541-2003 卫生设备配件.压力冲洗阀和自动关闭便池冲水阀PN10 Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10
BS EN 12567-2000 工业阀门.液化天然气用隔离阀.适用性验证试验规范 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
BS EN 12569-1999 工业阀门.化学和石油化学工艺工业阀门.要求和试验 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
BS EN 12570-2000 工业阀门.操作元件尺寸控制方法 Industrial valves - Method for sizing the operating element
BS EN 12627-1999 工业阀门.钢阀门的对接焊接端 Industrial valves - Butt welding ends for steel valves
BS EN 1267-1999 阀门.用水作为试验流体的耐流动性能试验 Valves - Test of flow resistance using water as a test fluid
BS EN 12760-1999 阀门.钢阀门的套节焊接端 Valves - Socket welding ends for steel valves
BS EN 1286-1999 卫生排水塞.低压机械混合阀.一般技术规范 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
BS EN 1287-1999 卫生排水塞.低压恒温混合阀.一般技术规范 Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
BS EN 12982-2000 工业阀门.对焊尾阀一端至另一端和中心到端面的尺寸 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
BS EN 13082-2001 危险品运输罐.装罐设备.蒸汽传输阀门 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
BS EN 13152-2002 液化石油气瓶阀门规范和测试.自闭锁 Specification and testing of LPG cylinder valves - Self closing
BS EN 13153-2002 液化石油气瓶阀门规范和测试.手动操作 Specification and testing of LPG cylinder valves - Manually operated
BS EN 13175-2003 液化石油气(LPG)罐阀和配件的规范和试验 Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings
BS EN 13244-4-2003 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.阀门 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves
BS EN 13308-2002 危险物品运输用槽罐车.槽罐车用辅助设备.无压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
BS EN 13312-5-2001 生物技术.管道和仪表性能标准.阀门 Biotechnology - Performance criteria for piping and instrumentation - Valves
BS EN 13316-2002 危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
BS EN 13397-2002 工业阀.金属材料制隔膜阀 Industrial valves - Diaphragm valves made of metallic materials
BS EN 1349-2000 工业用工序控制阀门 Industrial process control valves
BS EN 13617-3-2004 加油站.剪切阀的结构和性能的安全要求 Petrol filling stations - Safety requirements for constuction and performance of shear valves
BS EN 13648-1-2002 冷凝容器.防超压安全保护装置.冷凝设备的安全阀 Cryogenic vessels - Safety devices for protection against excessive pressure - Safety valves for cryogenic service
BS EN 1366-2-1999 服务设施的耐火试验.防火阀 Fire resistance tests for service installations - Fire dampers
BS EN 13709-2003 工业用阀.钢制球阀、球状截止阀和止回阀 Industrial valves - Steel globe and globe stop and check valves
BS EN 13774-2003 最大工作压力小于或等于16巴的配气系统用阀门.性能要求 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
BS EN 13786-2004 丁烷、丙烷或它们的混合物用最大输出压力4巴及以下和100 kg/h及以下容积的自动转换阀及其相关安全设备 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
BS EN 13789-2003 工业用阀.铸铁球阀 Industrial valves - Cast iron globe valves
BS EN 13792-2002 实验室内用水龙头和阀门的识别色码 Colour coding of taps and valves for use in laboratories
BS EN 13828-2003 建筑物用阀.建筑物内饮用水供给用手动铜合金及不锈钢球阀.试验及要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements
BS EN 13942-2003 石油和天然气工业.管道输送.管道阀 Petroleum and natural gas industries - Pipeline transportation - Pipeline valves
BS EN 13953-2003 液化石油气(LPG)用移动式可填充储气瓶的减压安全阀 Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG)
BS EN 14071-2004 LPG罐用减压阀.辅助设备 Pressure relief valves for LPG tanks - Ancillary equipment
BS EN 14124-2004 带内溢流口的冲洗水箱的进水阀 Inlet valves for flushing cisterns with internal overflow
BS EN 14129-2004 LPG罐用减压阀 Pressure relief valves for LPG tanks
BS EN 14141-2003 天然气输送用管道阀.性能要求和试验 Valves for natural gas transportation in pipelines - Performance requirements and tests
BS EN 14189-2003 可运输气瓶.气瓶定期检查时气瓶阀的检查和维修 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
BS EN 14382-2005 气压调节站和装置用安全设备.进气口压力100巴及以下的气体安全截止阀 Safety devices for gas pressure regulating stations and installations — Gas safety shut-off devices for inlet pressures up to 100 bar
BS EN 144-1-2000 呼吸保护装置.气瓶阀.插入式连接器用螺纹连接 Respiratory protective devices - Gas cylinder valves - Thread connections for insert connector
BS EN 144-2-1999 呼吸保护装置.气瓶阀.出口连接 Respiratory protective devices - Gas cylinder valves - Outlet connections
BS EN 144-3-2003 呼吸保护装置.气瓶阀.潜水用Nitrox和氧气气瓶的出口接头 Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen
BS EN 1452-4-2000 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).阀门和附属设备 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment
BS EN 14529-2005 呼吸保护装置.逃生用包含由需求阀控制的正压呼吸器的带半罩式面具的自持式开路压缩气体呼吸机 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
BS EN 14593-1-2005 呼吸防护装置.带用量阀的压缩空气管路呼吸装置.全罩式装置.要求、检验和标记 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a full mask - Requirements, testing, marking
BS EN 14593-2-2005 呼吸防护装置.带用量阀的压缩空气管路呼吸装置.在正压下半罩式装置.要求、检验和标记 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a half mask at positive pressure - Requirements, testing, marking
BS EN 14596-2005 危险物品运输用罐.罐用辅助设备.应急减压阀 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
BS EN 14848-2005 气溶胶容器.25.4 mm孔径的金属容器.阀座尺寸 Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups
BS EN 14849-2005 气溶胶容器.玻璃容器.气溶胶阀门金属箍尺寸 Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules
BS EN 1487-2000 建筑物阀门.液压安全组.试验和要求 Building valves - Hydraulic safety groups - Tests and requirements
BS EN 1488-2000 建筑物阀门.膨胀组.试验和要求 Building valves - Expansion groups - Tests and requirements
BS EN 1489-2000 建筑物阀门.安全阀.试验和要求 Building valves - Pressure safety valves - Tests and requirements
BS EN 1490-2000 建筑物阀门.温度和压力结合型的释放阀门.试验和要求 Building valves - Combined temperature and pressure relief valves - Tests and requirements
BS EN 1491-2000 建筑物阀门.膨胀阀门.试验和要求 Building valves - Expansion valves - Tests and requirements
BS EN 1503-1-2000 阀门.阀门体、帽和盖用材料.欧洲标准中规定的钢材 Valves - Materials for bodies, bonnets and covers - Steels specified in European Standards
BS EN 1503-2-2000 阀门.阀门体、帽和盖用材料.欧洲标准中规定之外的钢材 Valves - Materials for bodies, bonnets and covers - Steels other than those specified in European Standards
BS EN 1503-3-2000 阀门.阀门体,帽和盖用材料.欧洲标准中规定的铸铁 Valves - Materials for bodies, bonnets and covers - Cast irons specified in European Standards
BS EN 1503-4-2002 阀门.阀体、阀帽和阀盖用材料.欧洲标准中规定的铜合金 Valves - Materials for bodies, bonnets and covers - Copper alloys specified in European Standards
BS EN 1555-4-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves
BS EN 1567-2000 建筑物阀门.供水减压阀和组合减压阀.要求和试验 Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests
BS EN 161-2002 气体燃烧器和燃气器具自动关闭阀 Automatic shut-off valves for gas burners and gas appliances
BS EN 1626-1999 制冷容器.制冷用阀门 Cryogenic vessels - Valves for cryogenic service
BS EN 1643-2000 燃气燃烧装置和燃气器具的自动关闭阀的阀门检验系统 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
BS EN 1680-1997 塑料软管系统.聚乙烯(PE)管道系统用的阀门.弯曲力施加在工作机构上和之后的密封性的检验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
BS EN 1704-1997 塑料管道系统.热塑料管阀.弯曲情况下温度循环后阀门完整性的试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
BS EN 1705-1997 塑料管道系统.热塑性阀门.经过外部冲击后阀门的完整性试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
BS EN 1751-1999 建筑物通风.出气口设备.减振器和阀的空气动力学试验 Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves
BS EN 1759-1-2004 法兰及其连接件.等级标示的管、阀门、配件和附件用环形法兰.NPS 1/2到24 钢法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class-designated - Steel flanges, NPS 1/2 to 24
BS EN 1759-3-2004 法兰及其连接件.标注等级的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges
BS EN 1759-4-2003 法兰及其连接件.标注等级的管道、阀门、配件及附件用圆形法兰.铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges
BS EN 1827-1999 呼吸保护装置.防气体或气体和颗粒或只防颗粒的无吸气阀带分离式过滤器的半面罩.要求、试验和标记 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
BS EN 19-2002 工业阀门.金属阀门的标志 Industrial valves - Marking of metallic valves
BS EN 1984-2000 工业阀门.钢插板阀门 Industrial valves - Steel gate valves
BS EN 215-2004 恒温散热器控制阀.要求和试验方法 Thermostatic radiator valves - Requirements and test methods
BS EN 26553-1991 自动凝汽阀标志规范 Specification for marking of automatic steam traps
BS EN 26554-1991 法兰式自动凝汽阀的面对面尺寸规范 Specification for face-to-face dimensions for flanged automatic steam traps
BS EN 26704-1991 自动凝汽阀分类 Classification of automatic steam traps
BS EN 26948-1991 自动凝汽阀生产和性能特点试验规范 Specification for production and performance characteristic tests for automatic steam traps
BS EN 27841-1991 自动凝汽阀蒸汽损失的测定方法 Methods for determination of steam loss of automatic steam traps
BS EN 27842-1991 自动凝汽阀排放量的测定方法 Methods for determination of discharge capacity of automatic steam traps
BS EN 28233-1992 热塑性塑料阀门的扭矩试验方法 Thermoplastics valves - Torque - Test method
BS EN 28659-1992 热塑性塑料阀门.疲劳强度.试验方法 Thermoplastics valves - Fatigue strength - Test method
BS EN 331-1998 建筑物燃气供应设备用手动球阀和密封底部锥体旋塞阀 Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings
BS EN 405-2002 呼吸保护装置.防气体或防气体和颗粒的阀滤式半面罩.要求、试验和标记 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
BS EN 417-1992 与便携式灶具配用的带有或不带阀门的一次性金属液化石油气瓶.制作、检验、试验和标记 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
BS EN 45510-7-1-2000 发电站设备采购指南.管道系统和阀门.高压管道系统.第1节:高压管道系统 Guide for the procurement of power station equipment - Pipework and valves - High pressure piping systems - Section 1: High pressure piping systems
BS EN 45510-7-2-2000 发电站设备采购指南.管道系统和阀门.锅炉和高压阀门.第2节:锅炉和高压阀门 Guide for the procurement of power station equipment - Pipework and valves - Boiler and high pressure valves - Section 2: Boiler and high pressure valves
BS EN 488-2003 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层钢管用钢阀门 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 50216-8-2005 电力变换器和电抗器附件.绝缘液电路用蝶阀 Power transformer and reactor fittings — Part 8: Butterfly valves for insulating liquid circuits
BS EN 558-1-1996 工业用阀.法兰管系统使用的金属阀的面至面和中心至面的尺寸.PN设计阀 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN-designated valves
BS EN 558-2-1996 工业用阀.法兰管系统使用的金属阀.面至面和中心至面的尺寸.分类设计阀 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Class-designated valves
BS EN 561-2002 气焊设备.焊接、切割和类似加工工艺用断路阀门快速连接器 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS EN 593-2004 工业阀门.金属蝶阀 Industrial valves - Metallic butterfly valves
BS EN 60534-1-2005 工业过程控制阀.控制阀术语和一般考虑 Industrial-process control valves - Control valve terminology and general considerations
BS EN 60534-2-1-1999 工业过程控制阀 .流量.在安装条件下确定流体流量的规模方程 Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions
BS EN 60534-2-3-1998 工业过程控制阀.流量.试验程序 Industrial-process control valves - Flow capacity - Test procedures
BS EN 60534-2-5-2003 工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式 Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
BS EN 60534-3-1-2000 工业过程控制阀.尺寸.带法兰的两路、球型、直立式控制阀门端面间尺寸和带法兰的两路、球型、角度控制阀门中 Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
BS EN 60534-3-2-2001 工业过程控制阀.尺寸.蝶形阀除外的转式控制阀端面距 Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
BS EN 60534-3-3-1998 工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀端对端尺寸 Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60534-5-2004 工业过程控制阀.标记 Industrial-process control valves - Marking
BS EN 60534-6-1-1998 工业过程控制阀 .控制阀位置控制器的安装详图.位置控制器在线性执行机构上的安装 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators
BS EN 60534-6-2-2001 工业过程控制阀.定位器装到控制阀的安装细则.旋转传动装置上安装的定位器 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators - Positioner mounting on rotary actuators
BS EN 60534-8-1-2005 工业过程控制阀.噪声问题.气动流流经控制阀产生的噪声的实验室测量 Industrial-process control valves — Part 8-1: Noise considerations — Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-8-2-1991 工业过程控制阀.第8部分:噪声.第2节:控制阀气动噪声实验室测量 Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS EN 60534-8-3-2000 工业流程控制阀.噪声.控制阀气动噪声预测法 Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method - Control valve aerodynamic noise prediction method
BS EN 60534-8-4-1994 工业过程控制阀.第8部分:噪声.第4节.气动噪声预测 Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow
BS EN 60700-1-1999 高压直流(HVDC)电力传输半导体闸流阀.电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Electrical testing
BS EN 60730-2-19-2002 家用及类似用途的电自动控制装置.特殊要求 .电动油阀的特殊要求,包括机械要求 Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated oil valves, including mechanical requirements
BS EN 60730-2-8-2002 家用和类似用途的自动电控制器规范.特殊要求.电操作水阀门的特殊要求,包括机械要求 Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated water valves, including mechanical requirements
BS EN 60896-21-2005 固定式铅酸蓄电池组.阀门调节型.试验方法 Stationary lead-acid batteries - Valve regulated types - Methods of test
BS EN 60896-22-2005 固定式铅酸蓄电池组.阀门调节型.要求 Stationary lead-acid batteries - Valve regulated types - Requirements
BS EN 61056-1-2003 便携式铅酸电池和蓄电池(阀调节型).一般要求、功能特性.试验方法 Portable lead-acid cells and batteries (valve-regulated types) - General requirements, functional characteristics - Methods of test
BS EN 61056-2-2003 便携式铅酸电池和蓄电池(阀调节型).尺寸、接线端和标记 Portable lead-acid cells and batteries (valve-regulated types) - Dimensions, terminals and marking
BS EN 61514-2-2004 工业过程控制系统.气动输出智能阀门定位器性能评价的方法 Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
BS EN 61514-2002 工业过程控制系统.气动输出阀门定位器性能评价的方法 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
BS EN 61954-2000 送电和配电系统用电力电子设备.静态变量补偿器用半导体闸流管阀门的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
BS EN 629-1-1996 可移动的储气瓶.连接储气瓶和阀用的25E锥螺纹.规范 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification
BS EN 629-2-1996 可移动的储气瓶.连接储气瓶和阀用的25E锥螺纹.量规检验 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Gauge inspection
BS EN 736-1-1995 阀门.术语.阀门类型定义 Valves - Terminology - Definition of types of valves
BS EN 736-2-1997 阀门.术语.阀门零部件的定义 Valves - Terminology - Definition of components of valves
BS EN 736-3-1999 阀门.术语.术语定义 Valves - Terminology - Definition of terms
BS EN 738-3-1999 医疗用气体的压力调节器.与气瓶阀组合的压力调节器 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
BS EN 816-1997 卫生间水龙头旋塞装置.自动切断阀 PN 10 Sanitary tapware - Automatic shut-off valves PN 10
BS EN 917-1997 塑料管道系统.热塑阀门.抗内压和泄漏密封性的试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
BS EN 962-1997 气瓶.工业和医用气瓶的阀保护帽和阀罩 Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
BS EN ISO 10417-2004 石油和天然气工业.井下安全阀系统.设计、安装、操作和矫正 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
BS EN ISO 10432-2005 石油和天然气工业.下降孔设备.地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
BS EN ISO 10434-2004 石油、石化和相关工业用螺栓帽状钢闸阀 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
BS EN ISO 10497-2004 阀门试验.耐火试验要求 Testing of valves - Fire type-testing requirements
BS EN ISO 10692-2-2001 气瓶.用于微电子工业的储气瓶阀的连接接头.接到钢瓶连接接头上的阀门的定型试验和规范 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Specification and type testing for valve to cylinder connections
BS EN ISO 11114-1-1998 可运输气瓶.装气气瓶和阀门材料的兼容性.金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials
BS EN ISO 11114-2-2001 可运输气瓶.气瓶和含气阀门材料的可兼容性.非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Non-metallic materials
BS EN ISO 11114-3-1998 可运输气瓶.装气气瓶和阀门材料的兼容性.有氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Autogenous ignition test in oxygen atmosphere
BS EN ISO 11116-1-1999 气瓶.阀门与气瓶连接用17E锥型螺纹.规范 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Specifications
BS EN ISO 11116-2-1999 气瓶.气瓶与瓶阀连接用17E锥螺纹.检验量规 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges
BS EN ISO 12209-1-2001 气瓶.压缩可呼吸空气用气瓶阀的放气连接器.叉形连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Yoke type connections
BS EN ISO 12209-2-2001 气瓶.压缩可呼吸空气用气瓶阀的放气连接器.螺纹式连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Threaded connections
BS EN ISO 12209-3-2001 气瓶.压缩可呼吸气体用气瓶阀的出口连接.230巴阀门转接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Adaptor for 230 bar valves
BS EN ISO 13340-2001 可运输燃气瓶.不可再填充气体的钢气瓶的阀门.规范和原型件试验 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing
BS EN ISO 13341-1998 可运输储气瓶.储气瓶阀配件 Transportable gas cylinders - Fitting of valves to gas cylinders
BS EN ISO 13758-1997 石油和石油产品的试验方法.液化石油气.丙烷干燥性的评估.阀冻结法 Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
BS EN ISO 14246-2001 可运输的储气瓶.储气瓶阀门.生产试验和检验 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections
BS EN ISO 14723-2002 石油和天然气工业.管道输送系统.海下管道阀门 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
BS EN ISO 15245-1-2001 气瓶.连接储气瓶阀门接头用平行螺纹.规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification
BS EN ISO 15245-2-2001 储气瓶.气阀与储气瓶连接的平行螺纹.量规检验 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Gauge inspection
BS EN ISO 15364-2000 船舶与海上技术.散货船真空/压力阀 Ships and marine technology - Pressure/vacuum valves for cargo tanks
BS EN ISO 15761-2003 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
BS EN ISO 15848-1-2006 工业阀门.漏气的测量、试验和鉴定程序.阀门定型试验的分类系统和鉴定程序 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Classification system and qualification procedures for type testing of valves
BS EN ISO 15996-2005 储气瓶.剩余压力阀.一般要求和型式试验 Gas cylinders - Residual pressure valves - General requirements and type testing
BS EN ISO 17292-2004 石油、石油化工和相关工业用金属球阀 Metal ball valves for the petroleum, petrochemical and allied industries
BS EN ISO 3822-2-1996 声学.由供水设施和设备发出噪音的实验室试验.放水龙头和混合阀的安装和工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves
BS EN ISO 3822-3-1997 声学.供水设施中使用的设备和装置发出噪音的实验室试验.管路阀门和装置的安装和工作条作 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for in-line valves and appliances
BS EN ISO 407-2004 小型医用气瓶.针导轭式阀连接 Small medical gas cylinders - Pin-index yoke-type valve connections
BS EN ISO 4126-1-2004 防超压安全装置.安全阀 Safety devices for protection against excessive pressure - Safety valves
BS EN ISO 4126-4-2004 过压保护安全设备.由伺服电动机控制的安全阀 Safety devices for protection against excessive pressure - Pilot operated safety valves
BS EN ISO 5135-1999 声学.通过混响室测定空调终端设备、空调终端装置、阻尼器和阀门噪音的声音功率级 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
BS EN ISO 5210-1996 工业阀门.多回转阀门驱动装置的附件 Industrial valves - Multi-turn valve actuator attachments
BS EN ISO 5211-2001 工业用阀门.部分回转阀门驱动装置的附件 Industrial valves - Part-turn actuator attachments
BS EN ISO 9093-1-1995 小艇.金属海水阀和通体配件 Small craft - Seacocks and through-hull fittings - Metallic
BS ISO 10294-2-1999 耐火试验.空气调节系统用防火阀.试验结果的分类、标准和应用领域 Fire-resistance tests - Fire dampers for air distribution systems - Classification, criteria and field of application of test results
BS ISO 10294-4-2001 耐火试验.用于空气调节系统的防火阀.热释放装置试验 Fire-resistance tests - Fire dampers for air distribution systems - Test of thermal release mechanism
BS ISO 10294-5-2005 耐火试验.用于空气分配系统的防火阀.膨胀防火阀 Fire-resistance tests - Fire dampers for air distribution systems - Intumescent fire dampers
BS ISO 10372-1998 液压流体动力.4孔和5孔伺服阀.安装面 Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces
BS ISO 10770-1-1998 液压流体动力.电动调节液压控制阀.第1部分:四向流动控制阀的试验方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves
BS ISO 10770-2-1998 液压流体动力.电动调节液压控制阀.第2部分:三向流动控制阀的试验方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves
BS ISO 11727-1999 气动流体力学.控制阀和其它元部件的气门和控制机构的标识 Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components
BS ISO 11929-4-2001 电离辐射测量的检测限和判断阀的确定.在没有样品处理的影响下用模拟线性刻度辐射强度计测量的基本原理和方 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
BS ISO 12238-2001 气压液动.方向控制阀门.转换时间的测量 Pneumatic fluid power - Directional control valves - Measurement of shifting time
BS ISO 14617-8-2004 图示的图形符号.阀门和气流调节器 Graphical symbols for diagrams - Valves and dampers
BS ISO 15218-2003 气液传动.3/2电磁阀.安装接口表面 Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces
BS ISO 15364-2000 船舶技术.货槽用压力/真空阀 Ships and marine technology. Pressure/vacuum valves for cargo tanks
BS ISO 15407-1-2000 气动流体动力.尺寸为18mm和26mm的五孔方向控制阀.无电气连接器的安装界面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector
BS ISO 15407-2-2003 气压传动.五气口定向控制阀,规格18mm和26mm.有任选电连接器的安装接口 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector
BS ISO 15665-2003 声学.管、阀和法兰隔声 Acoustics - Acoustic insulation for pipes, valves and flanges
BS ISO 17082-2004 气压传动.阀.供货商文件中的数据 Pneumatic fluid power - Valves - Data to be included in supplier literature
BS ISO 20401-2005 气动液压驱动系统.方向控制阀.直径为8mm-12mm的电动圆形连接器的管脚分布规范 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
BS ISO 4401-2005 液压流体动力.四孔定向控制阀.安装面 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
BS ISO 5599-1-2001 气压流体动力.五通方向控制阀.不带电连接器的安装接口表面 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector
BS ISO 5599-2-2001 气压流体动力.五通方向控制阀.带选用电气连接器的安装接口面 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector
BS ISO 5781-2000 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面 Hydraulic fluid power - Pressure reducing valves, sequence valves , unloading valves, throttle valves and check valves - Mounting surfaces
BS ISO 6263-1997 液压流体动力.补偿式流量控制阀.安装面 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
BS ISO 6264-1998 液压流体动力.减压阀.安装面 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
BS ISO 6953-2-2001 气压传动.压缩空气调压阀和带过滤器的调压阀.评定供应商文件中包括的主要特性的试验方法 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliers
BS ISO 7789-1998 液压流体动力.二孔、三孔和四孔拧入式卡盘阀.孔腔 Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
BS ISO 7790-1998 液压流体动力.规格为02、03和05型的四孔模数叠阀和四孔定向控制阀.夹紧尺寸 Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
BS ISO 9393-1-2004 工业用热塑性阀门.压力试验方法和要求.总则 Thermoplastics valves for industrial applications - Pressure test methods and requirements - General
BS ISO/TR 7470-2000 储气瓶阀门出口.已标准化或使用中的供应目录 Valve outlets for gas cylinders - List of provisions which are either standardized or in use
BS MA 5-1970 阀门黄铜名牌规范 Specification for brass service nameplates for valves
编号中文名称英文名称

返回