| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI A112.14.1-1975
| 回水逆止阀
| Backwater valves
|
| ANSI B93.112M-1988
| 液压气动阀内部漏泄特性的测定方法
| Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics
|
| ANSI B93.77M-1987
| 液压气动缸传动安装阀安装表面的标准尺寸
| Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces
|
| ANSI B93.9M-1969
| 流体动力阀上标记电导线和端口的符号
| Symbols for Marking Electrical Leads and Ports on Fluid Power Valves
|
| ANSI T1.330-1997
| 电信.电信环境用的阀调的铅酸电池
| Telecommunications - Valve-regulated lead-acid batteries used in the telecommunications environment
|
| ANSI Z21.15-1997
| 煤气设备、设备连接阀和软管终端阀的手动煤气阀(同 CGA 9.1)
| Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1)
|
| ANSI Z21.15a-2001
| 煤气设备、设备连接阀和软管终端阀的手动煤气阀(同 CGA 9.1a)
| Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1a)
|
| ANSI Z21.21-2005
| 燃气器具用自动阀
| Automatic Valves for Gas Appliances (same as CSA 6.5)
|
| ANSI Z21.21b-2004
| 燃气器具用自动阀
| Automatic Valves for Gas Appliances (same as CSA 6.5b)
|
| ANSI Z21.22-1999
| 热水供给系统用安全阀(与CSA 4.4-1998相同)
| Relief Valves for Hot Water Supply Systems (same as CSA 4.4-1998)
|
| ANSI Z21.22a Addenda-1990
| 热水供给系统的安全阀和气体自动关闭装置.补充件
| Relief valves and automatic gas shutoff devices for hot water supply systems; Addenda
|
| ANSI Z21.22a-1999
| 减压阀和真空截止阀
| Pressure Relief Valves and Vacuum Relief Valves
|
| ANSI Z21.22b-2001
| 热水供应系统用截止阀
| Relief Valves for Hot Water Supply Systems (same as CSA 4.4b)
|
| ANSI Z21.79-1997
| 燃气器具冷凝阀
| Gas Appliances Sediment Traps
|
| ANSI Z21.79a-2005
| 燃气器具除垢阀
| Gas Appliance Sediment Traps (Same as CGA 6.21a)
|
| ANSI/API 14A-2005
| 井下安全阀设备的规范
| Specification for Subsurface Safety Valve Equipment
|
| ANSI/API 553-1999
| 炼油控制阀
| Refinery Control Valve
|
| ANSI/API 574-1998
| 管、阀门及配件的检验
| Inspection of Piping, Tubing, Valves, and Fittings
|
| ANSI/API 599-2002
| 金属塞阀.法兰和焊接端
| Metal Plug Valves - Flanged and Welding Ends
|
| ANSI/API 603-2001
| 150级,铸铁,耐腐蚀,法兰端闸阀
| Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
|
| ANSI/API 608-2002
| 对焊和法兰端金属球阀
| Metal Ball Valves - Flanged and Butt-Welding Ends
|
| ANSI/API 621-2001
| 金属闸阀、球阀和止回阀的重新调整
| Reconditioning of Metallic Gate, Globe, and Check Valves
|
| ANSI/API Std.600-2001
| 石油和天然气工业用螺栓接合钢制帽状阀门
| Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
|
| ANSI/API STD600-2001
| 石油和天然气工业用栓紧帽状钢门阀
| Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
|
| ANSI/ARI 750-2001
| 制冷剂恒温膨胀阀
| Thermostatic Refrigerant Expansion Valves
|
| ANSI/ARI 770-1994
| 制冷压力调节阀
| Refrigerant Pressure Regulating Valves
|
| ANSI/ASHRAE 158.1-2004
| 制冷电磁阀的容量试验方法
| Methods of Testing Capacity of Refrigerant Solenoid Valves
|
| ANSI/ASHRAE 17-1998
| 温度调节用制冷安全阀容量分级测试方法
| Capacity Rating of Thermostatic Refrigerant Expansion Valves, Method of Testing for
|
| ANSI/ASME A112.14.1-2003
| 回水阀
| Backwater Valves
|
| ANSI/ASME A112.18.7M-1999
| 预防内部回流的立式浴缸/淋浴转换阀
| Deck Mounted Bath/Shower Transfer Valves with Internal Backflow Prevention
|
| ANSI/ASME A112.4.1-1993
| 热水器安全阀排水管
| Water Heater Relief Valve Drain Tubes
|
| ANSI/ASME A112.4.14-2004
| 卫生管道系统中使用的手动直角转弯截止阀
| Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
|
| ANSI/ASME B16.10-2003
| 阀门的面对面及端对端尺寸
| Face-to-Face and End-to-End Dimensions of Valves
|
| ANSI/ASME B16.33-2002
| 125表压及以下的气体管道系统中使用的手动金属气体阀
| Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig
|
| ANSI/ASME B16.34-2004
| 阀门.带法兰、有螺纹和焊接端部
| Valves - Flanged, Threaded and Welding End
|
| ANSI/ASME B16.38-1985
| 气分配系统用大型手动金属阀(NPS 2 1/2到12,最大压力为125psig)
| Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum)
|
| ANSI/ASME B16.40-2002
| 气体分配系统中手动热塑气体截流阀及阀门
| Gas Shut-Offs and Valves in Gas Distribution Systems, Manually Operated Thermoplastic
|
| ANSI/ASME B16.44-2002
| 家用管道系统中使用的手工操作的金属气体阀门
| Manually Operated Metallic Gas Valves for Use in House Piping Systems
|
| ANSI/ASME B16.44a-1997
| 家庭管道系统中用手动金属气阀
| Manually Operated Metallic Gas Valves for Use in House Piping Systems
|
| ANSI/ASSE 1003-2001
| 水压减压阀的性能要求
| Performance Requirements for Water Pressure Reducing Valves
|
| ANSI/ASSE 1016-2005
| 单个淋浴装置和浴盆/淋浴组合中淋浴装置用自动补偿阀门的性能要求
| Performance Requirements for Automatic Compensating Valves for Individual Showers and Showers in Tub/Shower Combinations
|
| ANSI/ASSE 1017-1999
| 主要用于家庭的温控混合阀性能要求
| Performance Requirements for Temperature Actuated Mixing Valves for Primary Domestic Use
|
| ANSI/ASSE 1018-2002
| 分离器密封起动阀.轻便供水装置
| Trap Seal Primer Valves - Potable Water Supplied
|
| ANSI/ASSE 1024-2004
| 双重止回阀型防回流装置
| Dual Check Valve Type Backflow Preventers
|
| ANSI/ASSE 1044-2002
| 分离器密封起动阀.排水装置类型和电子设计类型
| Trap Seal Primer Devices - Drainage Types and Electronic Design Types
|
| ANSI/ASSE 1051-1998
| 污水管道系统用气体导入阀
| Air Admittance Valves for Plumbing Drainage Systems
|
| ANSI/ASSE 1056-2002
| 倒虹吸回流真空关闭阀
| Back Siphonage Backflow Vacuum Breakers
|
| ANSI/ASSE 1069-2005
| 自动温度控制混合阀门的性能要求
| Performance Requirements for Automatic Temperature Control Mixing Valves
|
| ANSI/ASTM A182/A 182M-2001
| 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范
| Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
| ANSI/ASTM B834-1996
| 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件规范
| Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
|
| ANSI/ASTM D2713-2001
| 测定丙烷干燥性的试验方法(阀门冷冻法)
| Test Method for Dryness of Propane (Valve Freeze Method)
|
| ANSI/ASTM D5500-1999
| 进气阀沉淀物中汽车点火无铅机油评估测试方法(05.03)
| Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit (05.03)
|
| ANSI/ASTM D6201-2004
| 进油阀沉积物形成用无铅火花点火发动机燃料的功率计评价用试验方法
| Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation
|
| ANSI/ASTM E1008-1997
| 地热和其他高温压力设备用阀身压力释放装置的装配、检测和维护惯例
| Practice for Installation, Inspection, and Maintenance of Value Body Pressure Relief Methods for Geothermal and Other High-Temperature Applications
|
| ANSI/ASTM F1020-1997
| 船用管路截流阀惯例
| Practice for Line Blind Valves for Marine Applications
|
| ANSI/ASTM F1030-1986
| 阀门操作人员的实施规程
| Practice for Selection of Valve Operators
|
| ANSI/ASTM F1098-1987
| 蝶阀-NPS 2 到 24包封尺寸的规范
| Specification for Envelope Dimensions for Butterfly Valves - NPS 2 to 24
|
| ANSI/ASTM F1139-1988
| 疏水阀和排水管的规范
| Specification for Steam Traps and Drains
|
| ANSI/ASTM F1271-1997
| 船上储罐液体过压保护装置溢流阀规范
| Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
|
| ANSI/ASTM F1370-1992
| 舰船用水系统减压阀的规范
| Specification for Pressure-Reducing Valves for Water Systems, Shipboard
|
| ANSI/ASTM F1508-1997
| 用于蒸汽、气体和液体设备的角型减压阀规范
| Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
|
| ANSI/ASTM F1565-2000
| 蒸汽供应减压阀规范
| Specification for Pressure-Reducing Valves for Steam Service
|
| ANSI/ASTM F1792-1997
| 气态氧供气阀门特殊要求规范
| Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
|
| ANSI/ASTM F1793-1997
| 空气或氮气供应截流阀(亦称流量限制阀()规范
| Specification for Automatic Shut-Off Valves (also known as Excess Flow Valves EFV) for Air or Nitrogen Service
|
| ANSI/ASTM F1794-1997
| 气体(除氧气)和液压系统手动球形阀门规范
| Specification for Hand-Operated Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
|
| ANSI/ASTM F1795-2000
| 空气或氮气系统减压阀规范
| Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
|
| ANSI/ASTM F1802-2004
| 溢流阀性能试验的试验方法
| Test Method for Performance Testing of Excess Flow Valves
|
| ANSI/ASTM F1970-2005
| 聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统专用工程配件、附件或阀门的规范
| Specification for Special Engineered Fittings, Appurtenances or Valves for Use in Poly(Vinyl Chloride) (PVC) or Chlorinated Poly(Vinyl Chloride) (CPVC) Systems
|
| ANSI/ASTM F1985-1999
| 气动球形控制阀规范
| Specification for Pneumatic-Operated, Globe-Style, Control Valves
|
| ANSI/ASTM F2138-2001
| 天然气设备溢流阀规范
| Specification for Excess Flow Valves for Natural Gas Service
|
| ANSI/ASTM F2324-2003
| 预清洗喷雾阀的试验方法
| Test Method for Pre-rinse Spray Valves
|
| ANSI/ASTM F885-1997
| 美国标准直管螺纹1/4至2英寸青铜球阀阀壳尺寸规范
| Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
|
| ANSI/ASTM F992-1997
| 阀门标识牌规范
| Specification for Valve Label Plates
|
| ANSI/ASTM F993-1997
| 阀门锁紧装置规范
| Specification for Valve Locking Devices
|
| ANSI/AWWA C500-2002
| 排水和污水系统闸门阀
| Gate Valves for Water and Sewage Systems
|
| ANSI/AWWA C504-2006
| 橡胶垫密封蝶阀
| Rubber-Seated Butterfly Valves
|
| ANSI/AWWA C507-2005
| 从6英寸(150mm)到48英寸(1200mm)的球阀
| Ball Valves 6 in (150 mm) through 48 in (1200 mm)
|
| ANSI/AWWA C508-2001
| 2in(50mm)-24in(600mm)NPS水厂设备摆动止回阀
| Swing-Check Valves for Waterworks Service, 2 in (50 mm) through 24 in (600 mm) NPS
|
| ANSI/AWWA C510-1997
| 双止回阀防回流组件
| Double Check Valve Backflow-Prevention Assembly
|
| ANSI/AWWA C512-2004
| 给水装置用放气阀、空气/真空和混合空气阀
| Air Release, Air/Vacuum, and Combination Air Valves for Water Works Service
|
| ANSI/AWWA C517-2005
| 弹性座式铸铁偏心塞阀
| Resilient-Seated Cast Iron Eccentric Plug Valves
|
| ANSI/AWWA C540-2002
| 阀门和水闸用作动装置
| Power-Actuating Devices for Valves and Sluice Gates
|
| ANSI/AWWA C550-2005
| 阀门和给水栓用防护性内部涂层
| Protective Interior Coatings for Valves and Hydrants
|
| ANSI/AWWA C800-2005
| 地下管道阀门和配件
| Underground Service Line Valves and Fittings
|
| ANSI/FCI 69-1-1989
| 疏水阀的压力额定值标准
| Pressure Rating Standard for Steam Traps
|
| ANSI/FCI 91-1-1997
| 控制阀门密性封的鉴定标准
| Standard for Qualification of Control Valve Stem Seals
|
| ANSI/IAS NGV4.6-1999
| 天然气分装系统手动控制阀
| Manually Operated Valves for Natural Gas Dispensing Systems
|
| ANSI/IAS NGV4.7-1999
| 天然气分装系统用自动压力控制阀
| Automatic Pressure-Operated Valves for Natural Gas Dispensing Systems
|
| ANSI/IEEE 1187-2002
| 固定用途的阀调节铅酸蓄电池的安装设计和安装的推荐实施规程
| Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications
|
| ANSI/IEEE 1189-1996
| 固定设备用的阀调节铅酸(VRLA)蓄电池的选择指南
| Guide for the Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Application
|
| ANSI/IEEE 1290-1996
| 核电站电动控制阀门电机的应用、保护、控制和试验指南
| Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
|
| ANSI/IEEE 382-1996
| 核电厂用带安全相关功能的电力操作阀组件的执行机构的合格鉴定
| Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power-Plants, Qualification of
|
| ANSI/IEEE 857-1996
| 高压直流可控硅换流阀试验程序的推荐实施规程
| Recommended Practice for Test Procedures for High Voltage Direct Current Thyristor Valves
|
| ANSI/IEEE C62.32-2004
| 气隙电涌防护装置(阀门和冲出式装置除外)的低压试验规范
| Air Gap Surge-Protective Devices (Excluding Valve and Expulsion-Type Devices), Test Specifications for the Low-Voltage
|
| ANSI/IIAR 3-2005
| 氨制冷机阀门
| Ammonia Refrigeration Valves
|
| ANSI/ISA 75.01.01-2002
| 尺寸控制阀用流量方程式
| Flow Equations for Sizing Control Valves
|
| ANSI/ISA 75.02-1996
| 控制阀能力试验程序
| Control Valve Capacity Test Procedures
|
| ANSI/ISA 75.04-1995
| 无凸缘控制阀的端面间尺寸(ANSI类型150、300和600)
| Face-to-Face Dimensions of Flangeless Control Valves (ANSI Classes 150, 300, and 600)
|
| ANSI/ISA 75.05.01-2001
| 控制阀术语
| Control Valve Terminology
|
| ANSI/ISA 75.08-1999
| 安装好的凸缘夹具或夹紧阀的端面间尺寸
| Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
|
| ANSI/ISA 75.08.01-2002
| 整体式带凸缘的球型(类型125、150、250、300和600)控制阀体的端面间尺寸
| Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)
|
| ANSI/ISA 75.08.02-2003
| 无凸缘的控制阀端面间的尺寸(级别150、300和600)
| Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600)
|
| ANSI/ISA 75.08.03-2001
| 承插焊接端和螺旋端球型控制阀的端面间尺寸(ANSI类型150、300、600、900、1500和2500)
| Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
|
| ANSI/ISA 75.08.04-2001
| 对焊端球型控制阀的端面尺寸
| Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
|
| ANSI/ISA 75.08.05-2002
| 端面对焊球型(类型150、300、600、900、1500和2500)控制阀的端面间尺寸
| Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)
|
| ANSI/ISA 75.08.06-2002
| 带凸缘的球型(类型900、1500和2500)控制阀体的面对面尺寸
| Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)
|
| ANSI/ISA 75.08.07-2001
| 可分离的凸缘球型控制阀的端面间尺寸(类型150、300和600)
| Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
|
| ANSI/ISA 75.08.09-2005
| 滑动杆无凸缘控制阀的端面间尺寸(类型150、300和600)
| Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600)
|
| ANSI/ISA 75.11.01-1985
| 控制阀的固有流量特征和可调范围
| Control Valves, Inherent Flow Characteristic and Rangeability of
|
| ANSI/ISA 75.19.01-2001
| 控制阀水压试验
| Hydrostatic Testing of Control Valves
|
| ANSI/ISA 75.22-1999
| 凸缘球型角度控制阀身的端面至中心间尺寸
| Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
|
| ANSI/ISA 75.25.01-2001
| 步进输入控制阀反应测量试验程序
| Test Procedures for Control Valve Response Measurement from Step Inputs
|
| ANSI/ISA S75.02-1996
| 控制阀容量测试程序
| Control Valve Capacity Test Procedures
|
| ANSI/ISA S75.04-1995
| 无法兰控制阀端间尺寸(ANSI 150,300和600级)
| Face-to-Face Dimensions of Flangeless Control Valves (ANSI Classes 150, 300, and 600)
|
| ANSI/ISA S75.08-1985
| 法兰夹具或夹紧阀的安装面与面间尺寸
| Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
|
| ANSI/ISA S75.08.03-2001
| 承插焊接端头和螺旋端头球状控制阀的面到面尺寸
| Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
|
| ANSI/ISA S75.08.04-2001
| 对焊端头球状控制阀的面到面尺寸
| Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
|
| ANSI/ISA S75.08.07-2001
| 独立法兰球状控制阀的面到面尺寸
| Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
|
| ANSI/ISA S75.11-1985
| 控制阀内在流量特性和幅度变化量
| Control Valves, Inherent Flow Characteristic and Rangeability of
|
| ANSI/ISA S75.14-1984
| 对焊端球型控制阀端间尺寸
| Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
|
| ANSI/ISA S75.19.01-2001
| 控制阀静水压试验
| Hydrostatic Testing of Control Valves
|
| ANSI/ISA S75.22-1992
| 法兰球式角度控制阀体的端面至中心尺寸
| Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
|
| ANSI/ISA S93.00.01-1999
| 手动和自动关闭阀门外泄露评估的标准方法
| Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves
|
| ANSI/ISA TR75.25.02-2000
| 阶式信号输入控制阀反应测量
| Control Valve Response Measurement from Step Inputs
|
| ANSI/NFPA 1964-2003
| 喷嘴(关闭阀和端头)
| Spray Nozzles (Shutoff and Tip)
|
| ANSI/SAE J1118-1993
| 摩托车制动系统试验程序用液压阀
| Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
|
| ANSI/SAE J1409-1998
| 空气制动阀试验程序
| Air Brake Valves Test Procedure
|
| ANSI/SAE J1410-1998
| 空气制动阀.性能要求
| Air Brake Valve - Performance Requirements
|
| ANSI/SAE J351-1994
| 油回火碳素钢阀、弹簧钢丝和弹簧
| Oil Tempered Carbon Steel Valve, Spring Quality Wire, and Springs
|
| ANSI/UL 1002-1996
| 分类危险场所用电动阀
| Electrically Operated Valves for Use in Hazardous (Classified) Locations
|
| ANSI/UL 125-2001
| 无水氨和液化气阀门的安全标准（安全阀除外）
| Standard for Safety for Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)
|
| ANSI/UL 132-2002
| 无水氨气和液化石油气的安全阀的安全标准
| Standard for Safety for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
|
| ANSI/UL 144-2001
| 液化石油气压力调节阀的安全标准
| Standard for Safety for Pressure-Regulating Valves for LP Gas
|
| ANSI/UL 1468-2004
| 消防设施用直接作用的降压和控压阀
| Direct-Acting Pressure-Reducing and Pressure-Control Valves for Fire Protection Service
|
| ANSI/UL 1478-2004
| 消防水泵减压阀
| Fire Pump Relief Valves
|
| ANSI/UL 1486-2003
| 防火设施用干管阀快速打开装置的安全标准
| Standard for Safety for Quick Opening Devices for Dry Pipe Valves for Fire Protection Service
|
| ANSI/UL 1739-2004
| 消防用液压控制阀
| Pilot-Operated Pressure-Control Valves for Fire-Protection Service
|
| ANSI/UL 193-2003
| 防火设施用报警阀门
| Alarm Valves for Fire-Protection Service
|
| ANSI/UL 312-2003
| 防火设施用止回阀
| Check Valves for Fire-Protection Service
|
| ANSI/UL 668-2004
| 消防设备用水带阀
| Hose Valves for Fire Protection Service
|
| ANSI/UL 753-1996
| 消防装置用自动供水控制阀的警报附件
| Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service
|
| ANSI/UL 842-1999
| 易燃液用阀门
| Valves for Flammable Fluids
|
| ASME A112.14.1-1975
| 回水阀门
| (Backwater valves)
|
| ASME A112.18.7-1999
| 装盖板的带整体回流保护的浴室/淋浴转换阀
| (Deck mounted bath/shower transfer valves with integral backflow protection)
|
| ASME A112.4.1-1993
| 热水器减压阀排水管
| (Water heater relief valve drain tubes)
|
| ASME B 16.40 Erratum-2003
| 燃气分配系统中的手动热塑性气体开关和阀门.对ASME B 16.40-2002的勘误
| (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems; Erratum to ASME B16.40-2002)
|
| ASME B16.10-2000
| 阀的面对面及端对端尺寸
| (Face-to-face and end-to-end dimensions of valves)
|
| ASME B16.33-2002
| 125表压及以下的气体管道系统中使用的手动金属气阀
| (Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2))
|
| ASME B16.34-1996
| 阀门.法兰、螺纹和焊接端
| (Valves - Flanged, threaded, and welding end)
|
| ASME B16.34a Addenda-1998
| 带螺纹的法兰式阀门和焊接端.附录
| (Valves - Flanged, threaded, and welding end; Addenda)
|
| ASME B16.38-1985
| 气体分配系统中用手动大型金属阀门(NPS 2 1/2到12,其最大允许表压不超过125巴)
| (Large metallic valves for gas distribution (manually operated, NPS 2 1/2 to 12, 125 psig maximum))
|
| ASME B16.40-2002
| 气体分配系统中的手动热塑性气体截流阀及阀门
| (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems)
|
| ASME B40.6-1994
| 限压阀
| (Pressure limiter valves)
|
| ASME N278.1-1975
| 与安全相关的自动和机动阀门.功能规范标准
| (Self-operated and power-operated safety-related valves - Functional specification standard)
|
| ASME PTC 25.3-1988
| 安全和减压阀
| (Safety and relief valves)
|
| ASME Y32.2.3-1949
| 管道配件,阀门,管道配置用图形符号
| (Graphical symbols for pipe fittings, valves and piping)
|
| ASTM A 126-2004
| 阀门、法兰和管配件用灰铁铸件的标准规范
| Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
|
| ASTM A 182/A 182Ma-2005
| 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件的标准规范
| Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
| ASTM A 230/A 230M-2005
| 阀簧级油回火碳素钢丝的标准规范
| Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
|
| ASTM A 232/A 232M-2005
| 阀簧级铬矾合金钢的标准规范
| Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
|
| ASTM A 338-1984
| 铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件
| Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C)
|
| ASTM A 522/A 522M-2001
| 低温设备用锻制或轧制含镍8%和9%的合金钢法兰、配件、阀门和零件的标准规范
| Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
|
| ASTM A 694/A 694M-2003
| 高压传输设备用管法兰、配件、阀门及零件用碳素钢及合金钢锻件的标准规范
| Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
|
| ASTM A 877/A 877M-2005
| 阀簧级铬硅合金钢丝的标准规范
| Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
|
| ASTM A 878/A 878M-2005
| 阀簧级改进的铬硅合金钢丝的标准规范
| Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
|
| ASTM A 961/A 961M-2005
| 管道设施用钢法兰、锻件、阀门和部件的通用要求的标准规范
| Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
|
| ASTM A 988/A 988M-2005
| 高温设备用热等静压压制的不锈钢法兰、配件、阀门和部件的标准规范
| Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
|
| ASTM A 989/A 989M-2005
| 高温设备用热等静压压制的合金钢法兰、配件、阀门和部件的标准规范
| Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
|
| ASTM B 61-2002
| 蒸气或阀门青铜铸件的标准规范
| Standard Specification for Steam or Valve Bronze Castings
|
| ASTM B 763-2004
| 阀门用铜合金砂型铸件标准规范
| Standard Specification for Copper Alloy Sand Castings for Valve Applications
|
| ASTM B 834-1995
| 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件标准规范
| Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
|
| ASTM C 1129-1989
| 通过给凸面阀门及法兰增加热绝缘材料评估蓄热量的标准实施规程
| Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
|
| ASTM D 2512-1995
| 材料与液氧兼容性标准试验方法(冲击敏感阀与可靠性技术)
| Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
|
| ASTM D 2713-1991
| 丙烷干燥性的标准试验方法(阀冻结法)
| Standard Test Method for Dryness of Propane (Valve Freeze Method)
|
| ASTM D 3076-2000
| 气溶胶容器外部卷合阀的有效卷合度的标准试验方法
| Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
|
| ASTM D 3089-1997
| 测量气溶胶阀填料斜管A-D尺寸的标准操作规程
| Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
|
| ASTM D 5500-1998
| 进液阀门沉积形成的不含铅自动火花点火引擎燃料的车辆评价标准试验方法
| Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
|
| ASTM D 6201-2004
| 进油阀沉积物形成用火花点燃式发动机无铅燃料的功率计评定标准试验方法
| Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
|
| ASTM E 1008-2003
| 地热和其它高温液体设备用减压阀体的安装、检验及维修用标准实施规范
| Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
|
| ASTM E 675-2002
| 可互换的圆锥接地旋塞阀和栓塞的标准规范
| Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
|
| ASTM E 911-1998
| 有聚四氟乙烯(PTFE)插头的玻璃管旋塞阀标准规范
| Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
|
| ASTM F 1020-1986
| 船用暗线阀
| Standard Specification for Line-Blind Valves for Marine Applications
|
| ASTM F 1030-1986
| 阀门操作器的选择
| Standard Practice for Selection of Valve Operators
|
| ASTM F 1094-1987
| 用直接加压分接抽样阀和用预先消毒塑料包法对电子和微电子器件加工用水微生物监测的测试方法
| Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
|
| ASTM F 1098-1987
| 管子公称尺寸2-24号用蝶阀外壳尺寸
| Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
|
| ASTM F 1139-1988
| 蒸汽疏水阀和排水管
| Standard Specification for Steam Traps and Drains
|
| ASTM F 1271-1990
| 船上储罐液体过压保护装置用溢流阀
| Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
|
| ASTM F 1370-1992
| 船上给水系统用减压阀
| Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
|
| ASTM F 1373-1993
| 气体分配系统组件用自动阀的周期寿命测定的标准试验方法
| Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
|
| ASTM F 1394-1992
| 测定从气体分配系统阀门产生的粒子成分的标准试验方法
| Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
|
| ASTM F 1431-1992
| 柴油机排气阻水阀
| Standard Specification for Water Trap for Diesel Exhaust
|
| ASTM F 1508-1996
| 用于蒸汽、气体和液体设备的角型减压阀标准规范
| Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
|
| ASTM F 1565-2000
| 蒸汽设备用减压阀标准规范
| Standard Specification for Pressure-Reducing Valves for Steam Service
|
| ASTM F 1792-1997
| 用于氧气服务的阀门的特殊要求的标准规范
| Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
|
| ASTM F 1793-1997
| 空气或氮服务用自动截流阀(也称为溢流阀)的标准规范
| Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
|
| ASTM F 1794-1997
| 手动、球型阀气体(除氧气)和液压系统标准规范
| Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
|
| ASTM F 1795-2000
| 空气或氮气系统用减压阀标准规范
| Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
|
| ASTM F 1802-2004
| 溢流阀性能测试标准试验方法
| Standard Test Method for Performance Testing of Excess Flow Valves
|
| ASTM F 1970-2005
| 聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统中使用的专用工程配件、附件或阀门的标准规范
| Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
|
| ASTM F 1985-1999
| 气动球形控制阀标准规范
| Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
|
| ASTM F 2138-2001
| 天然气设备用溢流阀标准规范
| Standard Specification for Excess Flow Valves for Natural Gas Service
|
| ASTM F 2215-2005
| 轴承、阀门和轴承设备用黑色和有色金属滚珠轴承标准规范
| Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications |
| ASTM F 2324-2003
| 预清洗喷雾器阀用标准试验方法
| Standard Test Method for Prerinse Spray Valves
|
| ASTM F 885-1984
| 美国标准直管螺纹1/4至2英寸青铜球型阀的阀壳尺寸标准规范
| Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
|
| ASTM F 992-1986
| 阀门标识牌
| Standard Specification for Valve Label Plates
|
| ASTM F 993-1986
| 阀门锁紧装置标准规范
| Standard Specification for Valve Locking Devices
|
| IEEE 1187-2002
| 固定设备用的阀调节铅酸蓄电池的安装设计和安装的推荐性实施规程
| (Recommended practice for installation design and installation of valve-regulated lead-acid storage batteries for stationary applications)
|
| IEEE 1188-1996
| 发电站用阀调节铅酸(VRLA)蓄电池组的保养、试验和更新的推荐规程
| (Recommended practice for maintenance, testing, and replacement of valve-regulated lead-acid (VRLA) batteries for stationary applications)
|
| IEEE 1189-1996
| 固定设备用调节阀铅酸(VRLA)蓄电池的选择指南
| (Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications)
|
| IEEE 1290-1996
| 核电站中电动阀门(MOV)的电机使用,保护,控制和试验的指南
| (Guide for motor operated valve (MOV) motor application, protection, control, and testing in nuclear power generating stations)
|
| IEEE 382-1996
| 对核电站用有安全功能的电动阀组驱动器的鉴定
| (Qualification of actuators for power-operated valve assemblies with safety-related functions for nuclear power plants)
|
| IEEE 857-1996
| 高压直流半导体闸流管阀试验程序推荐规程
| (Recommended practice for test procedures for high-voltage direct-current thyristor valves)
|
| UL 1002-1994
| 危险(分类的)场所用电动阀门
| (Electrically operated valves for use in hazardous (classified) locations )
|
| UL 1091-1994
| 消防装置用蝶阀
| (Butterfly valves for fire-protection service )
|
| UL 1106-1998
| 船舶用可燃液体人工操作断流阀
| (Marine manually operated shutoff valves for flammable liquids )
|
| UL 1121-1998
| 船用贯穿船身的配件和舷侧进水阀
| (Marine through-hull fittings and sea-valves )
|
| UL 125-1997
| 无水液氨和液化石油气阀门(不包括安全卸荷阀)
| (Valves for anhydrous ammonia and LP-gas (other than safety relief) )
|
| UL 132-1997
| 无水液体石油气用安全卸荷阀门
| (Safety relief valves for anhydrous ammonia and LP-gas )
|
| UL 144-1999
| 液化石油气调节阀
| (LP-gas regulators )
|
| UL 1468-1995
| 防火设备用直接控制的减压阀和压力控制阀
| (Direct acting pressure reducing and pressure restricting valves )
|
| UL 1469-1995
| 回流专用止回阀的阀身强度和液压损失率检验
| (Strength of body and hydraulic pressure loss testing of backflow special check valves )
|
| UL 1478-1995
| 消防泵减压阀
| (Fire pumps relief valves )
|
| UL 1486-2004
| 消防设备用干管阀门的快速开启装置
| (Quick opening devices for dry pipe valves for fire protection service )
|
| UL 17-1994
| 燃油设备用通风孔或烟囱连接器调节阀门
| (Vent or chimney connector dampers for oil-fired appliances )
|
| UL 1726-2001
| 储水系统用自动排水阀
| (Automatic drain valves for standpipe systems )
|
| UL 1739-1994
| 消防设备用液压控制的压力控制阀
| (Pilot-operated pressure-control valves for fire-protection service )
|
| UL 1769-2003
| 气瓶阀
| (Cylinder valves )
|
| UL 193-2004
| 防火用报警阀门
| (Alarm valves for fire-protection service )
|
| UL 260-1994
| 防火用蒸汽收集器和和集水阀门
| (Dry pipe and deluge valves for fire-protection service )
|
| UL 262-2004
| 防火用闸阀
| (Gate valves for fire-protection service )
|
| UL 312--2004
| 防火用切断阀
| (Check valves for fire-protection service )
|
| UL 352-1997
| 恒定液面油阀门
| (Constant-level oil valves )
|
| UL 429-1999
| 电动控制阀
| (Electrically operated valves )
|
| UL 668-1995
| 消防用软管阀门
| (Hose valves for fire-protection service )
|
| UL 753-1995
| 消防装置用自动供水控制阀报警附件
| (Alarm accessories for automatic water-supply control valves for fire protection service )
|
| UL 842-1997
| 可燃流体用阀门
| (Valves for flammable fluids )
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com