5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




美国压力标准(ANSI pressure standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号 中文名称 英文名称
ANSI A161.2-1998 人造高压力加工的装饰性案台面板的性能标准 Decorative Laminate Countertops, Performance Standards for Fabricated High Pressure
ANSI B11.1-2001 机床.机械动力压力机.制造、维护和使用的安全要求 Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care, and Use
ANSI B11.16-2003 粉末/金属压力机的安全要求 Safety Requirements for Powder / Metal Compacting Presses
ANSI B16.18-2001 铸铜合金焊锡连接压力配件 Cast Copper Alloy Solder Joint Pressure Fittings
ANSI B5.52M-1980 开式通用单点机械压力机(米制) Presses, General Purpose, Single Point, Gap Type, Mechanical Power (Metric)
ANSI S1.15 Part 2-2005 测试传声器.第2部分:用互易技术对实验室标准传声器进行压力校准的主要方法 Measurement Microphones - Part 2: Primary Method for Pressue Calibration of Laboratory Standard Microphones by the Reciprocity Technique
ANSI Z21.18-2007 燃气器具压力调节器(与CSA 6.3相同) Gas Appliance Pressure Regulators (same as CSA 6.3)
ANSI Z21.80-2002 线性压力调节器(同CSA 6.22) Line Pressure Regulators (same as CSA 6.22)
ANSI Z21.80a-2005 管路压力调节器 Line Pressure Regulators (Same as CSA 6.22a)
ANSI/(NFPA) T2.12.1-2002 液压传动.系统和产品.测量平均稳态压力的方法 Hydraulic fluid power - Systems and products - Method of measuring average steady-state pressure (to be used in conjunction with ANSI/(NFPA)T2.12.10)
ANSI/AAMI NS28-1988 颅内压力监测装置 Intracranial Pressure Monitoring Devices
ANSI/AIAA S-080-1998 航天系统.金属压力容器、加压结构和压力构件 Space Systems - Metallic Pressure Vessels, Pressurized Structures, and Pressure Components
ANSI/AIAA S-081A-2006 航天系统.复合包装压力容器(COPV) Space Systems - Composite Overwrapped Pressure Vessels (COPV)
ANSI/API 510-2006 压力容器检验规程:维护、检测、鉴定、修理和更换 Pressure Vessel Inspection Code - Maintenance Inspection, Rating, Repair, and Alteration
ANSI/API 521-2006 石油、石化产品和天然气工业.压力泄放系统 Petroleum, Petrochemical, and Natural Gas Industries - Pressure Relieving and Depressuring Systems (ISO 23251)
ANSI/API 572-2001 压力容器检查 Inspection of Pressure Vessels
ANSI/API 576-2000 压力释放设备检查 Inspection of Pressure-Relieving Devices
ANSI/API RP10B-4-2004 大气压力下泡沫水泥浆的制备和试验的推荐规程 Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure
ANSI/API RP10B-5-2007 大气压力下固井水泥加工制剂的收缩和膨胀测定用推荐实施规程 Recommended Practice on Determination of Shrinkage and Expansion of Well Cement Formulations at Atmospheric Pressure
ANSI/ARI 770-1994 制冷压力调节阀 Refrigerant Pressure Regulating Valves
ANSI/ASAE S385.5-1993 联合收割机轮胎荷载和充气压力 Combine Harvester Tire Loading and Inflation Pressures
ANSI/ASAE S430.1-1996 农用设备轮胎的负载和膨胀压力 Agricultural Equipment Tire Loading and Inflation Pressures
ANSI/ASHRAE 158.2P-2006 制冷剂压力调节器试验功能方法 Methods of Testing Capacity of Refrigerant Pressure Regulators
ANSI/ASME A112.19.15-2005 带压力密封门的浴池/旋涡浴池 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors
ANSI/ASME B16.22-2001 锻铜和铜合金钎焊接压力连接件 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
ANSI/ASME B16.38-1985 气分配系统用大型手动金属阀(NPS 2 1/2到12,最大压力为125psig) Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum)
ANSI/ASME B16.44-2002 压力不超过5psi的地上管道系统中用手工操作的金属气体阀门 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems up to 5 psi
ANSI/ASME B31.9-2004 建筑物服务设施用压力管道标准 Building Services Piping Code for Pressure Piping
ANSI/ASME B40.1-1991 量规.压力显示刻度表型.弹性元件 Gauges - Pressure Indicating Dial Type - Elastic Element
ANSI/ASME B40.100-2005 压力计和压力计附件 Pressure Gauges and Gauge Attachments
ANSI/ASME B40.6-2001 压力限幅电子管 Pressure Limiter Valves
ANSI/ASME B5.49-1998 机械压力机术语、汇编 Press Terms, Glossary of Mechanical
ANSI/ASME B5.55M-1994 机动压力机制动装置规范和性能标准 Specification and Performance Standard, Power Press Brakes
ANSI/ASME B5.61-2003 通用单动直边式动力压力机 Power Presses - General Purpose Single Action Straight Side Type
ANSI/ASME BPVCEdition-2001 ASME锅炉和压力容器编码 ASME Boiler and Pressure Vessel Code
ANSI/ASME BPVCRevision-2007 ASME锅炉和压力容器代码(2/2/07会议) ASME Boiler and Pressure Vessel Code (2/2/07 Meeting)
ANSI/ASME HPS-2003 高压力系统 High Pressure Systems
ANSI/ASME MFC-8M-2001 密封管中流体流量.主要设备和次要设备间压力信号传输用连接件 Fluid Flow in Closed Conduits - Connections for Pressure Signal Transmission Between Primary and Secondary Devices
ANSI/ASME PCC-1-2005 压力限制螺栓连接法兰联轴节组件的导则 Guidelines for Pressure Boundary Bolted Flange Joint Assembly
ANSI/ASME PCC-2-2006 压力设备和管道的维修标准 Repair of Pressure Equipment and Piping Standard
ANSI/ASME PTC19.2-2004 压力测量仪器仪表.第2部分 Pressure Measurement Instruments and Apparatus - Part 2
ANSI/ASME PVHO-1-2007 人占用的压力容器的安全标准 Safety Standard for Pressure Vessels for Human Occupancy
ANSI/ASME PVHO-2-2003 压力容器的安全性标准.在有人占用PVHO丙烯酸窗口时容器的安全使用指南 Safety Standard for Pressure Vessel for Human Occupancy In-Service Guidelines for PVHO Acrylic Windows
ANSI/ASSE 1020-2004 压力真空断路器组件 Pressure Vacuum Breakers Assembly
ANSI/ASTM A20/A 20M-2001 压力容器钢板一般要求规范 Specification for General Requirements for Steel Plates for Pressure Vessels
ANSI/ASTM A299-1996 压力容器用锰硅碳钢板规范 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
ANSI/ASTM A703/A 703M-2001 压力容器部件用钢铸件一般要求规范 Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
ANSI/ASTM B834-1996 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件规范 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
ANSI/ASTM D1267-2002 计量液化石油(LP)气蒸气压力的试验方法(液化石油气法) Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases LP-gas Method
ANSI/ASTM D1599-1999 塑料管材、管道和管件短时液压故障压力试验方法 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ANSI/ASTM D1621-2000 泡沫硬质塑料压力特性试验方法(08.01) Test Method for Compressive Properties of Rigid Cellular Plastics (08.01)
ANSI/ASTM D1657-2002 用压力温差比重计测定轻质烃密度或相对密度的试验方法 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
ANSI/ASTM D1760-2001 木材产品压力处理规范 Specification for Pressure Treatment of Timber Products
ANSI/ASTM D2143-2000 增强热固塑料管循环压力强度试验方法(08.04) Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ANSI/ASTM D2241-2005 聚氯乙烯(PVC)额定压力管规范(SDR系列) Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ANSI/ASTM D2484-2006 聚酯薄膜压力敏感的电绝缘胶带用规范 Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
ANSI/ASTM D2503-1992 用蒸气压力的热电测量法测定烃类分子重量的试验方法(05.01) Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure, Method of Test for (05.01)
ANSI/ASTM D2513a-2007 热塑性燃气压力管及配件的规范 Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings
ANSI/ASTM D2774-2001 热塑压力管地下安装惯例 Practice for Underground Installation of Thermoplastic Pressure Piping
ANSI/ASTM D2782-2002 润滑流体耐极端压力特性的测量方法(泰姆肯试验方法)(05.02) Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method), Method for (05.02)
ANSI/ASTM D2878-1995 评估润滑油的表观蒸气压力和分子重量的方法(05.02) Method for Estimating Apparent Vapor Pressures and Molecular Weight of Lubricating Oils (05.02)
ANSI/ASTM D2879-1997 用液体蒸气压力计测定液体的蒸气压力-温度关系和初始分解温度的试验方法 Test Method for Vapor Pressure-temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ANSI/ASTM D2889-1995 石油馏出燃料的实际蒸气压力的计算(05.02) Vapor Pressures of Petroleum Distillate Fuels, Calculation of True (05.02)
ANSI/ASTM D2924-2001 增强热固性树脂管耐外部压力试验(08.04) Reinforced Thermosetting-Resin Pipe, Test Method for External Pressure Resistance of (08.04)
ANSI/ASTM D2990-2001 塑料的张力、压力和柔性蠕变以及蠕变断裂试验方法(08.02) Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics (08.02)
ANSI/ASTM D2992-2006 玻璃纤维(增强玻璃纤维的热固树脂)管和配件用获得静液压或压力设计基础的规范 Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ANSI/ASTM D3139a-1996 使用柔韧弹性体密封的塑料压力管接头规范 Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ANSI/ASTM D323-2006 石油产品的蒸气压力的试验方法(Reid法) Test Method for Vapor Pressure of Petroleum Products (Reid Method)
ANSI/ASTM D3233-1993 液体润滑剂的极端压力特性的测量方法(润滑剂耐热耐压法)(05.02) Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Methods), Methods for (05.02)
ANSI/ASTM D3291-1997 压力作用下聚氯乙烯塑料增塑剂兼容性惯例 Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics under Compression (08.03)
ANSI/ASTM D3517-2006 玻璃纤维增强热固性树脂压力管的规范 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ANSI/ASTM D3754-2006 玻璃纤维增强热固性树脂污水压力管和工业压力管的规范 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ANSI/ASTM D4953-2006 汽油和汽油氧化混合物的蒸汽压力试验方法(烘干法) Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ANSI/ASTM D5190-2001 石油产品蒸气压力测试方法(自动法) Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (05.03)
ANSI/ASTM D5191-2007 石油产品蒸气压力的试验方法(小型法) Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ANSI/ASTM D5482-2001 石油产品蒸气压力试验方法(最低大气法) Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)
ANSI/ASTM D5483-2005 利用压力差示扫描量热法测定润滑油脂氧化诱导时间的试验方法 Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ANSI/ASTM D5949-2001 石油产品倾点测试方法(自动压力脉冲法) Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
ANSI/ASTM D6186-1997 利用压力差示扫描量热法(PDSC)测定润滑油氧化诱导时间定测定方法 Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ANSI/ASTM D6377-2004 原油蒸气压力测定的试验方法:Vpcrx(膨胀法) Test Method for Vapor Pressure of Crude Oil: Vpcrx (Expansion Method)
ANSI/ASTM D6378-2007 测定石油产品、碳氢化合物和氧化烃类混合物的蒸气压力(Vpx)的试验方法(三胀法) Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
ANSI/ASTM D6749-2002 石油产品倾点测试方法(自动空气压力法) Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ANSI/ASTM D6897-2004 液化石油气(LPG)蒸气压力的试验方法(膨胀法) Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ANSI/ASTM D7344-2007 大气压力下石油产品的蒸馏用试验方法(小型法) Test Method for Distillation of Petroleum Products at Atmospheric Pressure (mini Method)
ANSI/ASTM E1008-1997 地热和其他高温压力设备用阀身压力释放装置的装配、检测和维护惯例 Practice for Installation, Inspection, and Maintenance of Value Body Pressure Relief Methods for Geothermal and Other High-Temperature Applications
ANSI/ASTM E1424-1991 在试验样件规定压力和温差下测定通过外窗、幕墙和门空气泄漏率的试验方法 Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen (04.11)
ANSI/ASTM E1597-1999 海洋环境用光伏电池模拟器盐水浸没压力和温度测试方法 Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
ANSI/ASTM F1041-1995 聚烯烃燃气压力管和配件挤压指南 Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Fittings
ANSI/ASTM F1176-2001 最大工作压力为63psi(磅/平方英寸)的热塑灌溉系统设计和安装惯例 Practice for Design and Installation of Thermoplastic Irrigation Systems with Maximum Working Pressure of 63 PSI
ANSI/ASTM F1199-1988 铸造(所有温度和压力)和焊接管线滤网(150 PSIG 和150oF最大值)的规范 Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 PSIG and 150oF Maximum)
ANSI/ASTM F1281-2007 交联聚乙烯/铝/交联聚乙烯(PEX-AL-PEX)压力管规范 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ANSI/ASTM F1282-2005 聚乙烯/铝/聚乙烯(PE-AL-PE)合成压力管规范 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ANSI/ASTM F1335-2004 高温设备用压力标定复合管规范 Specification for Pressure-Rated Composite Pipe for Elevated Temperature Service
ANSI/ASTM F1483-1999 定向聚氯乙烯(PVCO)压力管的标准规范 Specification for Oriented Poly (Vinyl Chloride), PVCO, Pressure Pipe
ANSI/ASTM F1589-1996 塑料管裂纹快速扩展临界压力测定方法 Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe
ANSI/ASTM F1865-2002 交联聚乙烯管(PEX)用带压力套管的机械冷膨胀插入式配件规范 Specification for Mechanical Cold Expansion Insert Fitting with Compression Sleeve for Crosslinked Polyethylene PEX Tubing
ANSI/ASTM F1964-2006 压力油炸锅和锅状油炸锅性能试验方法 Test Method for the Performance of Pressure and Kettle Fryers
ANSI/ASTM F1974-2004 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插件规范 Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
ANSI/ASTM F2070-2001 压力和差动压力电及光纤换能器规范 Specification for Transducers, Pressure and Differential Pressure, Electrical and Fiber Optic
ANSI/ASTM F2164-2002 采用液压法进行聚乙烯压力管道系统场漏试验的惯例 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
ANSI/ASTM F2222-2002 医用抽吸设备.真空或压力源驱动的抽吸设备 Medical Suction Equipment-suction Equipment Powered from a Vacuum or Pressure Source
ANSI/ASTM F2389-2007 额定压力聚丙烯(PP)管道系统规范 Specification for Pressure-rated Polypropylene Pp Piping Systems
ANSI/ASTM F2562-2007 无压力排水和污水用钢增强热塑性肋状管和配件规范 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ANSI/ASTM F2569-2007 体育运动用表面压力还原性能评估的试验方法 Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ANSI/ASTM F690-1996 热塑压力管道灌溉系统地下安装惯例 Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
ANSI/AWS D14.5-1997 压力机和压力元件焊接规范 Specification for Welding of Presses and Press Components
ANSI/AWWA C111-2006 韧性铸铁压力管和配件的橡胶垫接头 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
ANSI/AWWA C300-2004 水及其他液体用钢制圆柱形加筋混凝土压力管 Reinforced Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids
ANSI/AWWA C301-2007 预应力混凝土压力管.钢筒型 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
ANSI/AWWA C302-2004 非圆柱形钢筋混凝土压力管 Reinforced Concrete Pressure Pipe, Noncylinder Type
ANSI/AWWA C303-2002 钢筒形条绕的混凝土压力管 Concrete Pressure Pipe, Bar-Wrapped, Steel Cylinder Type
ANSI/AWWA C401-2003 配水系统用4到16英寸(100mm到400mm)的石棉水泥压力管的选择 Selection of Asbestos-Cement Pressure Pipe, 4-in through 16-in (100-mm through 400-mm) for Water Distribution Systems
ANSI/AWWA C605-2005 水处理.输水用聚氯乙烯PVC压力管及配件的地下安装 Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water
ANSI/AWWA C900-2007 输水和配水用4英寸~12英寸(100mm~300mm)聚氯乙烯(PVC)压力管和装配配件 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings 4-Inch to 12-Inch (100 mm Through 300 mm) for Water Transmission and Distribution
ANSI/AWWA C901-2002 1/2到3英寸(13-76毫米)聚乙烯压力给水管 Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in (13 mm) through 3 in (76 mm), for Water Service
ANSI/AWWA C903-2005 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管 Polyethylene-Aluminum-Polyethylene & Crosslinked Polyethylene-Aluminum-Crosslinked Polyethylene Composite Pressure Pipes, 1/2 In. (12 mm) Through 2 In. (50 mm), for Water Service
ANSI/AWWA C904-2006 供水用0.5~3英寸(12~76 mm)交联聚乙烯压力管道 Cross-Linked Polyethylene Pressure Pipes, 1/2 In. (12 mm) Through 3 In. (76 mm) for Water Service
ANSI/AWWA C905-1997 14in.-36in.(聚氯乙烯(PVC)压力输水管和成品配件 Polyvinyl Chloride (PVC) Water Transmission Pipe (Nominal Diameters 14-36 inches)
ANSI/AWWA C906-2007 配水和输水用4"(100mm)~63"(1600mm)聚乙烯(PE)压力管和配件 PE Pressure Pipe & Fittings, 4" (100 mm) Through 63" (1600 mm), for Water Distribution and Transmission
ANSI/AWWA C907-2004 给水用注模聚氯乙烯4至12英寸压力管配件 Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. to 12 In. for Water Distribution
ANSI/AWWA C909-2002 给排水用4至12英寸(100至300mm)分子定向聚氯乙烯(PVCO)压力管 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 in. Through 12 in. (100 mm Through 300 mm), for Water Distribution
ANSI/AWWA C950-2007 玻璃纤维压力管 Fiberglass Pressure Pipe
ANSI/DASMA 115-2005 测试车库门用标准方法:在投掷物冲击和循环风压力下结构性能的测定 Standard Method for Testing Garage Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure
ANSI/FCI 69-1-1989 疏水阀的压力额定值标准 Pressure Rating Standard for Steam Traps
ANSI/FCI 73-1-1998 Y型滤器压力额定值标准 Pressure Rating Standard for "Y" Type Strainers
ANSI/FCI 78-1-1998 不包括Y型在内的管道滤器压力额定值标准 Pressure Rating Standard for Pipeline Strainers Other than "Y" Type
ANSI/FCI 79-1-2003 减压器压力额定值的验证 Proof of Pressure Ratings for Pressure Reducing Regulators
ANSI/IAS NGV4.7-1999 天然气分装系统用自动压力控制阀 Automatic Pressure-Operated Valves for Natural Gas Dispensing Systems
ANSI/SAE J188-1998 动力转向压力软管.高容积膨胀型 Power Steering Pressure Hose - High Volumetric Expansion Type
ANSI/SAE J190-1998 金属丝编织的动力转向压力软管 Power Steering Pressure Hose-Wire Braid
ANSI/SAE J191-1998 动力转向压力软管.低容积膨胀型 Power Steering Pressure Hose - Low Volumetric Expansion Type
ANSI/SAE J2050-1993 高温助力转向压力软管 High-Temperature Power Steering Pressure Hose
ANSI/TIA-455-41A-1993 光纤电缆的抗压力负荷性能 Compressive Loading Resistance of Fiber Optic Cable
ANSI/UL 136-2006 压力炊具 Pressure Cookers
ANSI/UL 144-2001 液化石油气压力调节阀的安全标准 Standard for Safety for Pressure-Regulating Valves for LP Gas
ANSI/UL 404-2006 压缩气体装置用压力指示计的安全标准 Standard for Safety for Gauges, Indicating Pressure, for Compressed Gas Service
ASME B16.18-2001 铸铜合金软钎焊连接压力管件 (Cast copper alloy solder joint pressure fittings)
ASME B16.22-2001 锻铜和铜合金钎焊压力配件 (Wrought copper and copper alloy solder joint pressure fittings)
ASME B16.50-2001 锻造铜及铜合金硬焊结合压力配件 (Wrought copper and copper alloy braze-joint pressure fittings)
ASME B31.3 Cases NO. 2-1993 压力管道用套管规程.套管141:在ANSI/ASME B 31.3管道标准中铝合金法兰的使用规则 (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping)
ASME B31G-1991 用于测定受腐蚀管道剩余强度的手册.MSME B31 压力管道规范的补充件 (Manual for determining the remaining strength of corroded pipelines; A supplement to ASME B31 code for pressure piping)
ASME B40.100-1998 压力计及其附件 (Pressure gauges and gauge attachments)
ASME B5.52M-1980 GAP型(米制)通用单点机械动力压力机 (Mechanical power presses - General purpose single point, GAP Type (Metric))
ASME BPVC CCB BPV Supplement 1 ASME锅炉和压力容器规范.CCB BPV.锅炉和压力容器.补充件1 (ASME Boiler and Pressure Vessel Code - Code Cases: CCB BPV; Boilers and Pressure Vessels; Supplement 1)
ASME BPVC CCB BPV-2001 ASME锅炉和压力容器规程.标准件:CCB BPV.锅炉和压力容器 (ASME Boiler & Pressure Vessel Code - Code Cases: CCB BPV; Boilers and Pressure Vessels)
ASME BPVC CCB NC Supplement 1- ASME锅炉和压力容器规范.CCB NC.核部件.补充件1 (ASME Boiler and Pressure Vessel Code - Code Cases: CCB NC; Nuclear Components; Supplement 1)
ASME BPVC CCB NC-2001 ASME锅炉和压力容器规程.标准件:CCB NC.核元件 (ASME Boiler & Pressure Vessel Code - Code Cases: CCB NC; Nuclear Components)
ASME BPVC Section 1-2001 ASME锅炉和压力容器规程.第1节:电力锅炉建造规则 (ASME Boiler & Pressure Vessel Code - Section 1: Rules for Construction of Power Boilers)
ASME BPVC Section 10-2001 ASME锅炉和压力容器规程.第10节:纤维增强塑料压力容器 (ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels)
ASME BPVC Section 11-2001 ASME锅炉和压力容器规程.第11节:核电厂元部件在使用中进行检查的规则 (ASME Boiler & Pressure Vessel Code - Section 11: Rules for Inservice Inspection of Nuclear Power Plant Components)
ASME BPVC Section 2 Part A-200 ASME锅炉和压力容器规程.第2节:材料.第A部分:钢铁材料规范 (ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part A: Ferrous Material Specifications)
ASME BPVC Section 2 Part B-200 ASME锅炉和压力容器规程.第2节:材料.第B部分:有色金属材料规范 (ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part B: Nonferrous Material Specifications)
ASME BPVC Section 2 Part C-200 ASME锅炉和压力容器规程.第2节:材料.第C部分:焊条、焊极和填充材料规范 (ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part C: Specifications for Welding Rods, Electrodes and Filler Metals)
ASME BPVC Section 2 Part D-200 ASME锅炉和压力容器规程.第2节:材料.第D部分:性能 (ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part D: Properties)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 1 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第1分册.第NF子节.支撑物 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 1; Subsection NF; Supports)
ASME BPVC Section 3 Division 2 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第2分册.混凝土反应堆容器和外壳标准 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 2; Code for Concrete Reactor Vessels and Containments)
ASME BPVC Section 3 Division 3 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第3分册.消耗核燃料和高等级放射性废物用外壳系统和运 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Division 3; Containment Systems and Transport Packaging for Spent Nuclear Fuel and High Level Rad)
ASME BPVC Section 3 NCA-2001 ASME锅炉和压力容器规程.第3节:核设施元部件制造规则.第NCA子节.1和2分册的一般要求 (ASME Boiler & Pressure Vessel Code - Section 3: Rules for Construction of Nuclear Facility Components; Subsection NCA; General Requirements for Division 1 and Division 2)
ASME BPVC Section 4-2001 ASME锅炉和压力容器规程.第4节:加热锅炉的建造规则 (ASME Boiler & Pressure Vessel Code - Section 4: Rules for Construction of Heating Boilers)
ASME BPVC Section 5-2001 ASME锅炉和压力容器规程.第5节:无损检验 (ASME Boiler & Pressure Vessel Code - Section 5: Nondestructive Examination)
ASME BPVC Section 6-2001 ASME锅炉和压力容器规程.第6节:加热锅炉维护和操作的推荐规则 (ASME Boiler & Pressure Vessel Code - Section 6: Recommended Rules for Care and Operation of Heating Boilers)
ASME BPVC Section 7-2001 ASME锅炉和压力容器规程.第7节:电力锅炉维护的推荐指南 (ASME Boiler & Pressure Vessel Code - Section 7: Recommended Guidelines for the Care of Power Boilers)
ASME BPVC Section 8 Division 1 ASME锅炉和压力容器规程.第8节:压力容器的制造规则.第1分册.压力容器 (ASME Boiler & Pressure Vessel Code - Section 8: Rules for Construction of Pressure Vessels; Division 1; Pressure Vessels)
ASME BPVC Section 8 Division 2 ASME锅炉和压力容器规程.第8节:压力容器的制造规则.第2分册.替代规则 (ASME Boiler & Pressure Vessel Code - Section 8: Rules for Construction of Pressure Vessels; Division 2; Alternative Rules)
ASME BPVC Section 8 Division 3 ASME锅炉和压力容器规程.第8节:压力容器的制造规则.第3分册.高压容器制造的替代规则 (ASME Boiler & Pressure Vessel Code - Section 8: Rules for Construction of Pressure Vessels; Division 3; Alternative Rules for Construction of High Pressure Vessels)
ASME BPVC Section 9-2001 ASME锅炉和压力容器规则.第9节:焊接和钎焊合格 (ASME Boiler & Pressure Vessel Code - Section 9: Welding and Brazing Qualifications)
ASME MC 88.1-1972 压力传感器的动态校准导则 (A guide for the dynamic calibration of pressure transducers)
ASME PCC-1-2000 压力边界螺栓法兰连接组件导则 (Guidelines for pressure boundary bolted flange joint assembly)
ASME PTC 19.2-1987 装置和仪器:第2部分:压力测量 (Instruments and apparatus - Part 2: Pressure measurement)
ASME PTC 20.3-1970 汽轮发电机组用压力控制系统 (Pressure control systems used on steam turbine-generator units)
ASTM A 1017/A 1017M-2007 铬钼钨合金钢压力容器板材的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
ASTM A 1041/A 1041M-2004 较高强度铬-钼-钨合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
ASTM A 1048/A 1048M-2006 高温工作的高强度铬钼钨合金钢压力容器锻件的标准规范 Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
ASTM A 1049/A 1049M-2006 压力容器和相关元件用铁素体/奥氏体(双重)不锈钢锻件的标准规范 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
ASTM A 20/A 20M-2006 压力容器用钢板一般要求的标准规范 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
ASTM A 203/A 203M-1997 压力容器用镍合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
ASTM A 204/A 204M-2003 压力容器用钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
ASTM A 225/A 225M-2003 压力容器用锰钒镍合金钢板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
ASTM A 240/A 240M-2007 压力容器和一般设备用铬及铬-镍不锈钢厚板材、薄板材和带材的标准规范 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A 266/A 266Ma-2003 压力容器部件用碳素钢锻件标准规范 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
ASTM A 278/A 278M-2001 650华氏温度以下的含压力部件用灰口铁铸件的标准规范 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
ASTM A 285/A 285M-2003 压力容器用低和中等抗拉强度的碳素钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
ASTM A 299/A 299M-2004 压力容器用锰硅碳钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
ASTM A 302/A 302M-2003 压力容器用锰钼和锰钼镍合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 31-2004 压力容器铆接用钢铆钉和铆接棒的标准规范 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
ASTM A 336/A 336M-2007 压力和高温部件用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM A 353/A 353M-2004 压力容器用经二次正火及回火处理的含9%镍的合金钢板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
ASTM A 372/A 372M-2003 薄壁压力容器用碳钢和合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
ASTM A 377-2003 球墨铸铁压力管规范用索引标准 Standard Index of Specifications for Ductile-Iron Pressure Pipe
ASTM A 387/A 387Ma-2006 压力容器用铬钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
ASTM A 414/A 414M-2007 压力容器用碳钢薄板材的标准规范 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
ASTM A 455/A 455M-2003 压力容器用高强度碳锰钢板标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
ASTM A 479/A 479Ma-2006 锅炉及其它压力容器用不锈钢棒材与型材的标准规范 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
ASTM A 508/A 508Mb-2005 压力容器用经淬火和回火真空处理的碳素钢与合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
ASTM A 515/A 515M-2003 中温及高温压力容器用碳素钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM A 516/A 516M-2006 中温及低温压力容器用碳素钢板材的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A 517/A 517M-2006 压力容器用经回火与淬火的高强度合金钢板 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
ASTM A 533/A 533M-1993 压力容器用经回火和淬火的锰钼及锰钼镍合金钢板 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 537/A 537M-2006 压力容器用热处理的碳锰硅钢板的标准规范 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A 541/A 541M-2005 压力容器部件用经淬火和回火的碳素钢及合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
ASTM A 542/A 542M-1999 压力容器用经回火和淬火的铬钼、铬钼钒及铬钼钒钛硼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
ASTM A 543/A 543M-1993 压力容器用经回火和淬火的镍铬钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
ASTM A 553/A 553M-2006 压力容器用经淬火和回火的含8%和9%镍的合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
ASTM A 562/A 562M-2006 玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A 592/A 592M-2004 压力容器用经回火和淬火的高强度低合金钢锻制配件和零件标准规范 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
ASTM A 608/A 608M-2006 高温压力设备用离心铸造的铁铬镍高合金钢管标准规范 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
ASTM A 612/A 612M-2003 中温和低温压力容器用高强度碳素钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
ASTM A 645/A 645M-2005 经特殊热处理的5%镍合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
ASTM A 662/A 662M-2003 中温和低温压力容器用碳锰硅钢板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
ASTM A 696a-1990 压力管道部件用特级热锻或冷精轧碳素钢棒标准规范 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
ASTM A 723/A 723M-2002 高强度压力元件用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
ASTM A 724/A 724M-2004 叠层焊接的压力容器用经淬火及回火的碳锰硅钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
ASTM A 734/A 734Ma-1987 经淬火和回火的合金钢与高强度低合金钢压力容器板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
ASTM A 735/A 735M-2003 中温和低温压力容器用低碳锰钼钶合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
ASTM A 736/A 736M-2003 压力容器用低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
ASTM A 737/A 737M-1999 高强度低合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
ASTM A 738/A 738M-2005 中温和低温设备用经热处理的碳锰硅钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
ASTM A 748/A 748M-1987 压力容器用静电铸造的白口铁-灰口铁双金属柱 Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
ASTM A 765/A 765M-2007 符合强制韧性要求的碳素钢和低合金钢压力容器部件锻件的标准规范 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
ASTM A 782/A 782M-2006 经淬火和回火的锰铬钼硅锆合金钢压力容器板的标准规范 Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
ASTM A 832/A 832M-2006 压力容器用铬钼钒合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
ASTM A 836/A 836M-2002 玻璃衬里的管道系统和压力容器设备用钛稳定的碳素钢锻件标准规范 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
ASTM A 841/A 841Ma-2003 用热机械控制法(TMCP)生产的压力容器用钢板的标准规范 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
ASTM A 844/A 844M-2004 压力容器用直接淬火加工的含镍9%的合金钢板标准规范 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
ASTM A 859/A 859M-2004 压力容器部件用时效硬化合金钢锻件的标准规范 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM A 873/A 873M-1987 压力容器用铬钼合金钢薄板和带材 Steel Sheet and Strip, Chromium-Molybdenum Alloy for Pressure Vessels
ASTM A 905-2004 压力容器缠绕用钢丝的标准规范 Standard Specification for Steel Wire, Pressure Vessel Winding
ASTM ANS/ISO 10079-3-1999 医疗吸引设备.第3部分:与美国国家标准有偏差的ASTM国际标准认可的真空或用压力驱动吸引设备 Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source Approved as an American National Standard with Deviations by ASTM International
ASTM B 171/B 171M-2004 压力容器、冷凝器和热交换器用铜合金板材和薄板材的标准规范 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
ASTM B 469-1994 压力设备用无缝铜合金管 Seamless Copper Alloy Tubes for Pressure Applications
ASTM B 548-2003 压力容器用铝合金板的超声波检验的标准试验方法 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
ASTM B 834-1995 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件标准规范 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
ASTM B 96/B 96M-2006 一般用途和压力容器用铜硅合金板材、薄板、带材和轧制棒材的标准规范 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
ASTM C 1306a-2005 液用防水薄膜抗静液压力的标准试验方法 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
ASTM C 231-2004 用压力法测定新搅拌混凝土中空气含量的标准试验方法 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 296-2000 石棉水泥压力管的标准规范 Standard Specification for Asbestos-Cement Pressure Pipe
ASTM C 361-2005 钢筋混凝土低水头压力管标准规范 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
ASTM C 361M-2005 钢筋混凝土低水头压力管的标准规范(米制) Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
ASTM C 601-1985 玻璃管的压力试验 Pressure Test on Glass Pipe
ASTM C 684-1999 混凝土压力试样的制作、快速养护和测试的标准试验方法 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
ASTM C 830-2000 用真空压力法测定成型耐火材料表观空隙率、吸水性、表观比重和体密度的标准试验方法 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C 973-1987 用压力法从喷制的碱性耐火产品中制备试验样品 Preparing Test Specimens from Basic Refractory Gunning Products by Pressing
ASTM C 975-1987 用压力法从捣实碱性耐火产品中制备试验样品的标准实施规程 Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM D 1143/D 1143M-2007 静态轴向压力载荷下深地基的标准试验方法 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D 1599-1999 塑料管道和配件耐短时液压力的标准试验方法 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 1657-2002 用压力液体比重计测定轻烃类物质的密度或相对密度的标准试验方法 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D 2112a-2001 用压力容器法测定防腐蚀矿物绝缘油氧化稳定性的标准试验方法 Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
ASTM D 2143-2000 增强热固塑料管耐周期性压力强度的标准试验方法 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D 2241-2005 聚氯乙烯(PVC)压力标定管的标准规范(SDR系列) Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D 2293-1996 用压力荷载法测定金属之间胶粘剂蠕变性能的标准试验方法 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D 2434-1968 在常水头压力下颗粒状土壤渗水率的标准试验方法 Standard Test Method for Permeability of Granular Soils (Constant Head)
ASTM D 2503-1992 蒸气压力热电测量法测定烃类相对分子质量(分子量)的标准试验方法 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D 2513a-2007 热塑性煤气压力管、管道系统及配件的标准规范 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D 2585-1968 丝线缠绕的压力容器的准备及抗拉试验方法 Test Method for Preparation and Tension Testing of Filament-Wound Pressure Vessels
ASTM D 2586-1968 玻璃增强塑料圆筒液体静压力强度的试验方法 Test Method for Hydrostatic Compressive Strength of Glass-Reinforced Plastic Cylinders
ASTM D 2759-2000 在正压力下从变压器中抽取气体样品的标准实施规程 Standard Practice for Sampling Gas from a Transformer Under Positive Pressure
ASTM D 2774-2004 热塑(性)压力管的地下安装标准规程 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
ASTM D 2782-2002 润滑液极端压力特性的标准试验法(泰姆肯法) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
ASTM D 2837-2004 获得热塑性管道材料静水压设计基数和热塑管道制品压力设计基数的标准试验方法 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM D 2844-2007 压实土的阻抗R值和膨胀压力的标准试验方法 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM D 2878-1995 润滑油表面蒸气压力和分子量评估的标准试验方法 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D 2879-1997 蒸气压力计测定液体的蒸气压力-温度关系及起始分解温度的标准试验方法 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D 2889-1995 石油馏分燃料真蒸气压力计算的标准试验方法 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
ASTM D 2924-2001 增强的热固树脂管抗外部压力性能的标准试验方法 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D 3003-2001 金属衬底表面有机涂层耐压力斑迹和抗粘连性标准试验方法 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D 3070-2000 加压制品快速压力测定的标准试验方法 Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D 3139-1998 使用挠性弹性密封件的塑料压力管用连接件标准规范 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM D 3152-1972 用压力膜装置对细土壤的毛细管与水分之间关系的试验方法 Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus
ASTM D 323-2006 石油产品蒸气压力的标准测试方法(Reid法) Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
ASTM D 3291-1997 压力作用下聚氯乙烯塑料中增塑剂的兼容性 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
ASTM D 3517-2006 玻璃纤维增强热固性树脂压力管的标准规范 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D 3754-2006 玻璃纤维增强热固性树脂污水压力管和工业压力管的标准规范 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D 3877-2002 土壤石灰混合物单向膨胀,收缩和隆起压力的标准试验方法 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
ASTM D 3915-2006 压力设备用塑料管和配件用硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)化合物的标准规范 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
ASTM D 3931a-1993 测定裂缝强度的标准试验方法.用压力负荷法测定填充胶粘剂的剪切 粘结强度 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 4264-1990 室内储水管用橡胶衬里的消防软管和橡胶增强软管的组合件的压力试验方法 Test Method for Pressure Testing of Assemblies of Rubber-Lined Fire Hose and Rubber Booster Hose in Service on Interior Standpipes
ASTM D 454-2004 用加热及空气压力法测定橡胶变质的标准试验方法 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D 4631-1995 用压力脉冲技术现场测量低渗透性岩石的透射率和释水系数的标准试验方法 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
ASTM D 4719-2007 土壤中预打孔压力计测试的标准试验方法 Standard Test Method for Prebored Pressuremeter Testing in Soils
ASTM D 4953-2006 汽油和汽油元氧混合物蒸气压力的标准试验方法(干燥法) Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 4970-2005 纺织纤维品的耐起球和其他相关表面变化的标准试验方法(马丁戴尔压力检验机法) Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester)
ASTM D 5190-2001 石油产品蒸气压力的标准试验方法(自动方法) Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
ASTM D 5191-2007 石油产品蒸气压力的标准试验方法(小型法) Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 5224-2000 热固模制合成材料的压力模制试样的标准操作规程 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM D 5325-2003 测定水基型(压力罐装)喷雾涂料中挥发物重量百分比的标准试验方法 Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
ASTM D 5385-1993 防水材料耐静水压力的试验方法 Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
ASTM D 5482-2001 石油产品蒸气压力的标准试验方法(大气的小型法) Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)
ASTM D 5685-2005 "玻璃纤维"(玻璃-纤维-增强热固树脂)压力管配件的标准规范 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D 5720-1995 土工用电子传感器型压力测量系统静态校准标准规程 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
ASTM D 6049-2003 通过平行板之间压力测定橡胶化合物和非含硫生橡胶黏性和弹性的橡胶特性的标准试验方法 Standard Test Method for Rubber Property - Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D 6069-2001 通过氧化燃烧和还原压力化学发光检测法测定航空用碳氢化合物中痕量氮的标准试验方法 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D 6377-2003 原油蒸气压力测定的标准试验方法:VPCRx(膨胀法) Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
ASTM D 6378-2007 测定石油产品、烃和烃氧化剂混合物蒸气压力(VPX)的标准试验方法(三级膨胀法) Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
ASTM D 6641-2001 用组合式荷载压力试验夹具测定聚合物基质复合叠材的压力特性的标准试验方法 Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
ASTM D 6897a-2003 液化石油气蒸气压力的标准试验方法(膨胀法) Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ASTM D 7088-2004 砖石工程用地下设施涂层的抗流体静压力的标准规程 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
ASTM D 7089-2006 用压力冲洗水泥、砖石和天然石料表面的除涂鸦的覆层有效性测定的标准实施规程 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
ASTM E 1005-2003 E706(ⅢA)反应堆压力容器监视用辐射测量监视器的应用和分析的标准试验方法   Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM E 1139-2002 连续监测来自金属压力界面的声发射的标准实施规程 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
ASTM E 1214-2006 使用反应堆堆芯压力容器监督用熔丝温度监视器的标准指南.E 706 (IIIE) Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)
ASTM E 1226-2005 可燃粉尘用压力和压力提高率的标准试验方法 Standard Test Method for Pressure and Rate of Pressure Rise for Combustible Dusts
ASTM E 1419b-2002 用声音排放法检验无缝、充气的压力容器的标准试验方法 Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission
ASTM E 1424-1991 在试样两侧特定压力和温度差下透过外窗,护墙和门的空气泄漏率的测定方法 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
ASTM E 1597-2005 海洋环境用光电组件的盐水压力浸渍试验和温度试验的标准试验方法 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
ASTM E 1719-2005 用沸点测定法测定液体蒸气压力的标准试验方法 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM E 1782-2003 用热分析法测定蒸气压力的标准试验方法 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E 1886-2005 受弹性体冲击以及循环压力差下外窗、幕墙、门和冲击保护系统性能的标准试验方法 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
ASTM E 1888/E 1888M-2007 带轻质木心由玻璃纤维增强塑料制成的压力容器声音发出检验用标准实施规程 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
ASTM E 2071-2000 从蒸气压力数据中计算汽化热或蒸馏热的标准规程 Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
ASTM E 2191-2002 利用声辐射检查充气的丝绕复合材料压力容器的标准试验方法 Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
ASTM E 2223-2002 用斜束超声法检验无缝、充气钢制的压力容器的标准实施规程 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics
ASTM E 2581-2007 航天航空用聚合物基复合材料、夹层芯材和纤维缠绕压力容器的剪切测量技术的标准实施规程 Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications
ASTM E 296-1970 用于空间模拟器的电离压力计的标准实施规程 Standard Practice for Ionization Gage Application to Space Simulators
ASTM E 482-2007 反应堆压力容器监视用中子输运法应用的标准指南.E706(IID) Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)
ASTM E 636-2002 对E706(IH)核动力反应堆压力容器进行辅助监视试验的标准指南 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)
ASTM E 637-2005 通过临界点传热与压力的热传递理论和实验测量来计算临界热函的标准试验方法 Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E 706-2002 E706(0)轻水反应堆压力容器监视标准的标准主模型 Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards, E706(0)
ASTM E 789-1995 1.2公升的密封圆筒形容器中粉尘爆炸产生压力以及压力升高的速率的标准测试方法 Standard Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel
ASTM E 918-1983 温度和压力升高时化学药品易燃极限的测定 Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
ASTM F 1025-1994 用于增强或修复聚乙烯煤气压力管上爆裂或破洞的全环绕型带夹紧装置的选择和使用 Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
ASTM F 1041-2002 聚烯烃燃气压力管和管道的燃气排除的标准指南 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM F 1112a-2006 静态测试无内胎充气轮胎的充气压力损耗率的标准试验方法 Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
ASTM F 1176-2001 最大工作压力为125psi的地下热塑灌溉系统设计和安装的标准实施规程 Standard Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi
ASTM F 1199-1988 铸造(各种温度及各种压力)和焊接管道过滤器(最大表压为150磅/英寸及最大温度150华氏度) Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
ASTM F 1281-2007 交联聚乙烯/铝/交联聚乙烯(PEX-AL-PEX)压力管的标准规范 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM F 1282-2006 聚乙烯/铝/聚乙烯(PE-AL-PE)复合材料压力管的标准规范 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F 1335-2004 高温设备用标定压力的复合管道及其配件标准规范 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
ASTM F 1483-2005 定向聚氯乙烯(PVCO)压力管的标准规范 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
ASTM F 1819-2007 使用机械压力技术通过合成血液对防护服用抗渗透材料的标准试验方法 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
ASTM F 1964-1999 压力油炸器和锅状油炸器性能的标准试验方法 Standard Test Method for Performance of Pressure and Kettle Fryers
ASTM F 1974-2004 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插配件标准规范 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
ASTM F 2070-2000 压力和差动压力电及光纤换能器标准规范 Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
ASTM F 2164-2002 使用静液压的聚乙烯压力管道系统的现场泄漏试验的标准实施规范 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
ASTM F 2231-2002 压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM F 2261-2006 表40~80额定压力氯乙烯(PVC)塑料管配件的标准试验方法 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
ASTM F 2389-2007 压力标定的聚丙烯(PP)管道系统标准规范 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
ASTM F 2467-2006 运输用途中用压力指片(PIF)测量静态密封压力的标准实施规程 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
ASTM F 2528-2006 带压力气囊的肠给食装置标准试验方法 Standard Test Methods for Enteral Feeding Devices with a Retention Balloon
ASTM F 2562/F 2562M-2007 非压力排水和排污用增强钢热塑加肋管及其配件的标准规范 Standard Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F 2569-2007 体育运动用表面压力还原性能评估的标准试验方法 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ASTM F 689-1997 有金属套管的地上塑料气体压力管的温度测定 Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
ASTM F 690-1986 热塑性压力管道灌溉系统的地下安装标准规程 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
ASTM F 948-1994 在恒定内流动压力下塑料管道系统和组件损坏时间的标准试验方法 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM/ISO 10079-3-1999 医疗抽吸设备.第3部分:真空或压力抽吸设备 Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source
UL 10C-1998 门组件的正压力燃烧试验 (Positive pressure fire tests of door assemblies )
UL 136-2002 压力锅 (Pressure cookers )
UL 1468-1995 防火设备用直接控制的减压阀和压力控制阀 (Direct acting pressure reducing and pressure restricting valves )
UL 1713-2001 地下消防设备用玻璃纤维增强压力管道和管联接器 (Pressure pipe and couplings, glass fiber-reinforced, for underground fire service )
UL 1739-1994 消防设备用液压控制的压力控制阀 (Pilot-operated pressure-control valves for fire-protection service )
UL 194-1996 防火用球墨铸铁和灰铸铁压力管和配件加垫圈的接头 (Gasketed joints for ductile-iron pipe and fittings for fire protection service )
UL 393-1996 消防设备用压力指示计 (Indicating pressure gauges for fire-protection service )
UL 404-1997 压缩煤气设备用压力指示计 (Gauges, indicating pressure, for compressed gas service )
UL 745-2-32-1995 磁力钻床压力机特殊要求 (Particular requirements for magnetic drill presses )
编号 中文名称 英文名称

返回