| 编号 |
中文名称 |
英文名称 |
| ANSI ATIS0600307-2007
|
远程通信.耐火标准.设备组件的可燃性要求和电线及电缆用火焰传播要求
|
Telecommunications - Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies and Fire Spread Requirements for Wire and Cable
|
| ANSI/ASTM D1047-2007
|
电线和电缆用聚氯乙烯套的规范
|
Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable
|
| ANSI/ASTM D1351-2002
|
电线和电缆用热塑性聚乙烯绝缘规范
|
Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
|
| ANSI/ASTM D1523-2000
|
工作在90℃的电线和电缆用合成橡胶绝缘材料的规范
|
Specification for Synthetic Rubber Insulation for Wire and Cable, 90 C Operation
|
| ANSI/ASTM D2219-2002
|
工作温度为60℃的聚氯乙烯电线和电缆绝缘规范(10.01)
|
Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 C Operation
|
| ANSI/ASTM D2220-2002
|
工作温度为75℃的聚氯乙烯电线和电缆绝缘规范(10.01)
|
Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
|
| ANSI/ASTM D2308-2007
|
电线和电缆用热塑性聚乙烯包装物规范
|
Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
|
| ANSI/ASTM D2633-2002
|
电线和电缆用热塑性绝缘体和护套测试方法
|
Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
|
| ANSI/ASTM D2655-2000
|
额定电压达到2000伏的电线和电缆交联聚乙烯绝缘材料规范(10.02)
|
Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ANSI/ASTM D2656-2006
|
额定电压2001～35 000V的电线和电缆交联聚乙烯绝缘材料用规范
|
Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
|
| ANSI/ASTM D2770-2001
|
电线及电缆用耐臭氧乙丙橡胶整体绝缘材料及套管规范
|
Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
|
| ANSI/ASTM D2802-2003
|
电线和电缆用耐臭氧乙丙橡胶绝缘材料规范
|
Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable
|
| ANSI/ASTM D4244-1995
|
重负载和超重负载丙烯腈丁二烯聚氯乙烯(NBR PVC)电线和电缆护套通用规范
|
Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02)
|
| ANSI/ASTM D4245-2002
|
工作温度为90℃干/75℃湿的电线和电缆的耐臭氧热塑性合成橡胶绝缘规范
|
Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation
|
| ANSI/ASTM D4246-2002
|
工作温度为90℃的电线和电缆的耐臭氧热塑性合成橡胶绝缘规范
|
Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation
|
| ANSI/ASTM D4313-2003
|
电线及电缆用普通、重型及超重型交联氯化聚乙烯套管规范
|
Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable
|
| ANSI/ASTM D4314-1999
|
普通重负载和超重负载交叉链环的氯磺化聚乙烯电线和电缆护套规范(10.02)
|
Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02)
|
| ANSI/ASTM D4363-1998
|
电线和电缆的热塑氯化聚乙烯套管规范
|
Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable
|
| ANSI/ASTM D4565-1999
|
远程通信电线和电缆用绝缘体和套管物理和环境性能特性的试验方法(10.02)
|
Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
|
| ANSI/ASTM D4566-1998
|
远程通信电线和电缆用绝缘体和套管电气性能特性试验方法(10.02)
|
Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)
|
| ANSI/ASTM D470-2005
|
电线和电缆用交联绝缘材料和护套的试验方法(10.01)
|
Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)
|
| ANSI/ASTM D4730-2002
|
电信电线和电缆浸渍化合物规范
|
Specification for Flooding Compounds for Telecommunications Wire and Cable
|
| ANSI/ASTM D4731-2002
|
电信电线和电缆用热充填化合物规范
|
Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
|
| ANSI/ASTM D4732-2002
|
电信电线和电缆用冷充填化合物规范
|
Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
|
| ANSI/ASTM D4872-1999
|
电线和电缆填充化合物介电试验的试验方法
|
Test Method for Dielectric Testing of Wire and Cable Filling Compounds
|
| ANSI/ASTM D6070-2002
|
预组装电线和电缆用光壁可盘绕聚乙烯(PE)管道物理特性试验方法
|
Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
| ANSI/ASTM D866-1999
|
电线及电缆用丁苯合成橡胶套规范
|
Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01)
|
| ANSI/ASTM F1883-2003
|
用美国线规(AWG)或米制单位选择电线和电缆规格的实施规程
|
Practice for Selection of Wire and Cable Size, in AWG or Metric Units
|
| ANSI/EIA 654-2000
|
电线和电气元件耐焊接热试验程序
|
Resistance to Soldering Heat Test Procedure for Wire and Electrical Components
|
| ANSI/EIA-364-92-1997
|
电连接器绝缘位移触点(IDC)的电线弯曲试验程序
|
Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
|
| ANSI/EIA-364-93-1997
|
电连接器绝缘位移触点(IDC)的电线重复连接和断开试验程序
|
Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
|
| ANSI/EIA-654-2000
|
电线和电器元件耐焊接热试验程序
|
Resistance to Soldering Heat Test Procedure for Wire and Electrical Components
|
| ANSI/ICEA S-100-685-2006
|
室内/室外用热塑性绝缘和有套通信站用电线
|
Thermoplastic Insulated and Jacketed Telecommunications Station Wire for Indoor/Outdoor Use
|
| ANSI/IEEE 1202-2006
|
电线和电缆的火焰传播测试用标准
|
Standard for Flame-Propagation Testing of Wire & Cable
|
| ANSI/IEEE 1210-2004
|
使用电线和电缆测定电缆润滑剂可混用性的标准试验
|
Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable
|
| ANSI/IEEE 1410-2004
|
电力架空配电线的避雷性能提高的指南
|
Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines
|
| ANSI/IEEE 776-1993
|
供电线路和通信线感应配合指南
|
Guide for Inductive Coordination of Electric Supply and Communication Lines
|
| ANSI/IEEE 977-1991
|
输电线结构基础安装指南
|
Installataion of Foundations for Transmission Line Structures, Guide for
|
| ANSI/IEEE C37.104-2002
|
交流配电线和输电线用户线断路器自动重闭指南
|
Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines
|
| ANSI/IPC/EIA J-STD-002B-2003
|
元件引线、终端、接线片、端子和电线的可钎焊性试验
|
Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires
|
| ANSI/NECA 104-2006
|
安装铝建筑电线和电缆的推荐规程
|
Recommended Practice for Installing Aluminum Building Wire and Cable
|
| ANSI/NEMA HP3-2000
|
电子和电气用ET(250V)、E(600V)和EE(1000V)型PTFE(聚四氟乙烯)绝缘高温架空电线
|
Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire, Types ET (250 Volt), E (600 Volt) and EE (1000 Volt)
|
| ANSI/NEMA HP4-2000
|
KT型(250V)、K型(600V)和KK型(1000V)电和电子FEP(氟乙烯丙烯)绝缘高温架空电线
|
Electrical and Electronic FEP (Fluorinated Ethylene Propylene)-Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt) and KK (1000 Volt)
|
| ANSI/NFPA 262-2002
|
电线和电缆的着火和烟雾特征试验
|
Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces
|
| ANSI/SCTE 39-2002
|
共轴总线、馈电线和配线电缆用静态最小弯曲半径的试验方法
|
Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables
|
| ANSI/TIA/EIA 102.BAEA-1-2002
|
项目25.数据综述.附录1.USB/PPP.新技术标准项目.数字无线电线路技术项目
|
Project 25 - Data Overview - Addendum 1 - USB/PPP - New Technology Standards Project - Digital Radio Technical Standards
|
| ANSI/TIA/EIA 102.BAEB-2-2002
|
项目25.分组数据规范.附录1.USB/PPP.新技术标准项目.数字无线电线路技术标准项目
|
Project 25 - Packet Data Specification - Addendum 1 - USB/PPP - New Technology Standards Project - Digital Radio Technical Standards
|
| ANSI/TIA/EIA 102.BAEE-1-2002
|
项目25.无线电控制协议.附录1.USB/PPP.新技术标准项目.数字无线电线路技术标准
|
Project 25 - Radio Control Protocol - Addendum 1 - USB/PPP - New Technology Standards Project - Digital Radio Technical Standards
|
| ANSI/TIA/EIA 455-200-2001
|
连接偏振嵌入损失.维护光纤和极化光纤软电线装置和电缆组件
|
Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
|
| ANSI/UL 1565-2004
|
电线定位装置
|
Wire Positioning Devices
|
| ANSI/UL 1581-2006
|
安全标准.电线、电缆和软线的基准标准
|
Standard for Safety - Reference Standard for Electrical Wires, Cables, and Flexible Cords
|
| ANSI/UL 2438-2006
|
户外季节性使用的电线连接的布线设备的安全标准
|
Standard for Safety for Outdoor Seasonal-Use Cord-Connected Wiring Devices
|
| ANSI/UL 2556-2007
|
电线和电缆试验方法的安全标准
|
Standard for Safety for Wire and Cable Test Methods
|
| ANSI/UL 44-2005
|
橡胶绝缘电线和电缆
|
Rubber-Insulated Wires and Cables
|
| ANSI/UL 486A-486B-2006
|
电线连接器标准
|
Standard for Wire Connectors (Proposals dated 3/17/06)
|
| ANSI/UL 83-2003
|
热塑性绝缘电线和电缆
|
Thermoplastic-Insulated Wires and Cables
|
| ANSI/UL 870-2003
|
电线管道、辅助槽和相关配件
|
Wireways, Auxiliary Gutters, and Associated Fittings
|
| ASTM B 47a-1995
|
铜架空电线的标准规范
|
Standard Specification for Copper Trolley Wire
|
| ASTM D 1047-2007
|
电线及电缆用聚氯乙烯套管的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
|
| ASTM D 1248-2005
|
电线和电缆用聚乙烯塑料挤制材料标准规范
|
Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
|
| ASTM D 1351-2002
|
电线和电缆用热塑性聚乙烯绝缘材料的标准规范
|
Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
|
| ASTM D 1523-2000
|
工作温度为90℃的电线和电缆用合成橡胶绝缘材料的标准规范
|
Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
|
| ASTM D 2219-2002
|
工作温度60°C的电线和电缆用聚氯乙烯绝缘性的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 °C Operation
|
| ASTM D 2220-2002
|
工作温度75°C的电线和电缆用聚氯乙烯绝缘性的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75 °C Operation
|
| ASTM D 2307a-2007
|
薄膜绝缘磁性圆电线的热稳定性用标准试验方法
|
Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
|
| ASTM D 2308-2007
|
电线及电缆用热塑性聚乙烯套管的标准规范
|
Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
|
| ASTM D 2633-2002
|
电线及电缆用热塑绝缘材料和护套的标准试验方法
|
Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
|
| ASTM D 2655-2000
|
额定电压为0到2000V的电线和电缆用交联聚乙烯绝缘材料的标准规范
|
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ASTM D 2656-2006
|
额定电压:2001～35000V的电线和电缆用交联聚乙烯绝缘材料的标准规范
|
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
|
| ASTM D 2768-1995
|
电线和电缆用普通的乙丙橡胶护套标准规范
|
Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable
|
| ASTM D 2802-2003
|
电线及电缆用耐臭氧乙烯烃聚合物绝缘材料的标准规范
|
Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
|
| ASTM D 3485-2002
|
预组合电线及电缆用平滑壁螺旋式聚乙烯导管的标准规范
|
Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
| ASTM D 3554-2007
|
工作温度75°C的电线和电缆用不留痕迹的黑色高密度聚乙烯绝缘材料的标准规范
|
Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
|
| ASTM D 3555-2007
|
90°C工作条件下的电线和电缆用不留痕迹的黑色交联聚乙烯绝缘材料的标准规范
|
Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90°C Operation
|
| ASTM D 4244-1995
|
电线及电缆用普通的、重型及超重型丙烯腈-丁二烯/聚氯乙烯套管的标准规范
|
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable
|
| ASTM D 4245-2002
|
在干90℃/湿75℃时电线和电缆的耐臭氧热塑性弹性体绝缘的标准规范
|
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
|
| ASTM D 4246-2002
|
在90℃时电线和电缆的耐臭氧热塑性弹性体绝缘的标准规范
|
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
|
| ASTM D 4313-2003
|
电线及电缆用普通、重型及超重型交联氯化聚乙烯(CM)套管标准规范
|
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
|
| ASTM D 4314-2005
|
电线及电缆用普通、重型及超重型交联氯磺化聚乙烯(CSM)套管的标准规范
|
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
|
| ASTM D 4363-1998
|
电线和电缆用热塑氯化聚乙烯套管规格标准规范
|
Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
|
| ASTM D 4565-1999
|
远程通信电线和电缆用绝缘体和套管的物理和环境性能特性的标准试验方法
|
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
| ASTM D 4566-2005
|
远程通信电线和电缆用绝缘体和套管的电气性能特性的标准试验方法
|
Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
| ASTM D 470-2005
|
电线和电缆用交联绝缘材料与套管的标准试验方法
|
Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
|
| ASTM D 4730-2002
|
电信电线和电缆用浸渍化合物的标准规范
|
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
|
| ASTM D 4731-2002
|
电信电线和电缆用热充填化合物的标准规范
|
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
|
| ASTM D 4732-2002
|
电信电线和电缆用冷充填化合物的标准规范
|
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
|
| ASTM D 4872-1999
|
电线和电缆填充物介电性测试的标准试验方法
|
Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
|
| ASTM D 532-1990
|
电线及电缆用天然橡胶套管规格
|
Natural Rubber Jacket for Wire and Cable
|
| ASTM D 6070-2002
|
预组装的电线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性的标准试验方法
|
Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
| ASTM D 6096-2007
|
工作温度90°C的电线和电缆用聚氯乙烯绝缘性的标准规范
|
Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90 °C Operation
|
| ASTM D 866-1999
|
电线及电缆用丁苯合成橡胶套
|
Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
|
| ASTM F 16-1967
|
电子器件和电灯用电线及带条的直径或厚度测量方法
|
Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
|
| ASTM F 2522-2005
|
测定带电线路工具或齿条上用于防电弧伤害的护罩的防护性能的标准试验方法
|
Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
|
| ASTM F 777-1989
|
与火焰成60°角时电线绝缘材料的耐火性的试验方法
|
Test Method for Resistance of Electrical Wire Insulation Materials to Flame at 60 Degrees
|
| IEEE 1025-1993
|
混凝土电线杆结构组装和竖立安装
|
(Assembly and erection of concrete pole structures)
|
| IEEE 1138-1994
|
用于电气设备电线的架空复合光钎线缆的建造
|
(Construction of composite fiber optic overhead ground wire (OPGW) for use on electric utility power lines)
|
| IEEE 1410-1997
|
提高电力架空配电线路避雷性能指南
|
(Guide for improving the lightning performance of electric power overhead distribution lines)
|
| IEEE 977-1991
|
输电线结构基础安装南指南
|
(Guide to installation of foundations for transmission line structures)
|
| IEEE C 135.61-1997
|
架空传输和配电线硬件试验
|
(Testing of overhead transmission and distribution line hardware)
|
| IEEE C 37.104-2002
|
交流配电线和输电线用线路断路器的自动重闭指南
|
(Guide for automatic reclosing of line circuit breakers for AC distribution and transmission lines)
|
| UL 1063-1998
|
机床用电线和电缆
|
(Machine-tool wires and cables )
|
| UL 1565-2002
|
电线定位装置
|
(Wire positioning devices )
|
| UL 1581-2001
|
电线、电缆和软线的参考标准
|
(Reference standard for electrical wires, cables, and flexible cords )
|
| UL 1951-1994
|
电线管道附件
|
(Electric plumbing accessories )
|
| UL 2231-1-2002
|
电动车辆供电线路的人员保护系统.一般要求
|
(Personnel protection systems for electric vehicle (EV) supply circuits - General requirements )
|
| UL 2231-2-2002
|
电动车辆供电线路的人员保护系统.充电系统用保护装置的特殊要求
|
(Personnel protection systems for electric vehicle (EV) supply circuits - Particular requirements for protective devices for use in charging systems )
|
| UL 817-2001
|
电线集和电力供给电线
|
(Cord sets and power-supply cords )
|
| UL 83-2003
|
热塑绝缘电线和电缆
|
(Thermoplastic-insulated wires and cables )
|
| UL 870-1995
|
电线槽、辅助槽及有关配件
|
(Wireways, auxiliary gutters, and associated fittings )
|
| UL 884-1998
|
地板下的电线管和配件
|
(Underfloor raceways and fittings )
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com