| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI B11.2-1995
| 机床.液压机.制造、维护和使用的安全性要求
| Machine tools - Hydraulic power presses - Safety requirements for construction, care, and use
|
| ANSI B93.10M-1969
| 方头液压传动缸的静态压力旋转法
| Static Pressure Rating Methods of Square Head Fluid Power Cylinders
|
| ANSI B93.112M-1988
| 液压气动阀内部漏泄特性的测定方法
| Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics
|
| ANSI B93.46-1978
| 过滤器元件、可清洁表面型液压传动孔大小的测定方法
| Filter Element, Method of Determining the Pore Size of a Cleanable Surface Type Hydraulic Fluid Power
|
| ANSI B93.54M-1981
| 液压传动.组装系统.实现辗轧洁净度的方法
| Hydraulic Fluid Power - Assembled Systems - Method for Achieving Roll-off Cleanliness
|
| ANSI B93.62M-1982
| 液压传动.线性执行器中往复式动力密封设备.泄露的试验、测量和报告方法
| Hydraulic Fluid Power - Reciprocating Dynamic Sealing Devices in Linear Actuators - Method of Testing, Measuring, and Reporting Leakage
|
| ANSI B93.76-1988
| 液压气动缸.往复运动用活塞和活塞杆密封腔的尺寸和公差
| Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances
|
| ANSI B93.77M-1987
| 液压气动缸传动安装阀安装表面的标准尺寸
| Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces
|
| ANSI B93.95M-1987
| 液压气动用容积式泵、马达、整体传输.稳态性能的测量
| Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance
|
| ANSI B93.98M-1987
| 液压用旋转轴凸缘密封圈的公称尺寸和公差
| Fluid Power - Rotary Shaft Lip Type Seals - Nominal Dimensions and Tolerances
|
| ANSI S2.48-1993
| 振动发生器的伺服液压试验设备.特性的描述方法
| Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics
|
| ANSI/(NFPA) T2.12.1-2002
| 液压传动.系统和产品.测量平均稳态压力的方法
| Hydraulic fluid power - Systems and products - Method of measuring average steady-state pressure (to be used in conjunction with ANSI/(NFPA)T2.12.10)
|
| ANSI/(NFPA) T2.12.10-2002
| 推荐实施规程.液压传动.系统和产品.检验一般测量原则和公差
| Recommended practice - Hydraulic fluid power - Systems and products - Testing general measurement principles and tolerances (to be used in conjunction with ANSI/(NFPA)T2.12.1)
|
| ANSI/(NFPA) T3.19.25 R1-2004
| 信息报告.液压系统.密封装置.弹性密封件和隔离装置的存储、搬运和安装
| Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation of Elastomeric Seals and Exclusion Devices
|
| ANSI/ASAE S201.4-1982
| 农用拖拉机拖挂型农具、液压遥控汽缸的应用
| Agricultural Tractors and Trailing-Type Agricultural Implements, Application of Hydraulic Remote Control Cylinders to
|
| ANSI/ASAE S366.2-2004
| 农业拖拉机和机械.一般用途快速液压接头
| Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
|
| ANSI/ASME A112.19.13-2001
| 电动液压抽水马桶
| Electrohydraulic Water Closets
|
| ANSI/ASTM D1599-1999
| 塑料管材、管道和管件短时液压故障压力试验方法
| Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
|
| ANSI/ASTM D2070-1991
| 液压油的热稳定性的试验方法(05.01)
| Method for Thermal Stability of Hydraulic Oils (05.01)
|
| ANSI/ASTM D2619-1995
| 液压油的水解稳定性的试验方法(酒瓶试验法)(05.02)
| Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Test Method), Test Method for (05.02)
|
| ANSI/ASTM D4174-1989
| 石油液压系统的清洁、冲洗和净化惯例
| Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems, Practice for the (05.02)
|
| ANSI/ASTM D4636-1998
| 液压油、航空透平引擎润滑剂和其他高精炼油的腐蚀与氧化稳定性测试方法
| Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
|
| ANSI/ASTM D4898-1990
| 重力测量分析液压油不溶性污染试验方法
| Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
|
| ANSI/ASTM D4998-1995
| 评定拖拉机液压油耐磨特性的试验方法
| Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids (05.03)
|
| ANSI/ASTM D5306-1997
| 润滑油和液压液的线性传播速率的测试新方法
| New Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids (05.03)
|
| ANSI/ASTM D5534-1999
| 液压液汽相生锈预防特性的测试方法
| Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
|
| ANSI/ASTM D5846-2002
| 液压流体和涡轮机油的一般氧化试验方法
| Test Method for Universal Oxidation Test for Hydraulic Fluids and Turbine Oils
|
| ANSI/ASTM D6006a-1997
| 液压液生物降解性的评定指南
| Guide for Assessing Biodegradabillty of Hydraulic Fluids
|
| ANSI/ASTM D6046-2002
| 环境冲击用液压液的分类
| Classification of Hydraulic Fluids for Environmental Impact
|
| ANSI/ASTM D6158-2005
| 矿物液压油规范
| Specification for Mineral Hydraulic Oils
|
| ANSI/ASTM D6351-1999
| 液压油低温流动性和外观测定方法
| Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
|
| ANSI/ASTM D6546-2000
| 工业用液压油密封圈兼容性的测定试验方法和提议限制
| Test Methods and Suggested Limits for Determining the Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
|
| ANSI/ASTM D6595-2005
| 用转盘电极原子发射光谱法测定已用润滑油或已用液压液中磨损金属和杂质的试验方法
| Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
|
| ANSI/ASTM D6813a-2002
| 活塞泵的液压流体性能的评定指南
| Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps
|
| ANSI/ASTM D6973-2005
| 高压定容叶轮泵中石油液压液耐磨特性指示的试验方法
| Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
|
| ANSI/ASTM D7043a-2004
| 固定容量离心泵中石油和非石油液压液磨损特性指示的试验方法
| Test Method for Indicating Wear Characteristics of Petroleum and Non-petroleum Hydraulic Fluids in a Constant Volume Vane Pump
|
| ANSI/ASTM D7044a-2004
| 可生物降解的耐火液压液规范
| Specification for Biodegradable Fire Resistant Hydraulic Fluids
|
| ANSI/ASTM F1794-1997
| 气体(除氧气)和液压系统手动球形阀门规范
| Specification for Hand-Operated Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
|
| ANSI/ASTM F2164-2002
| 采用液压法进行聚乙烯压力管道系统场漏试验的惯例
| Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
|
| ANSI/IEEE 1249-1996
| 液压电力工厂以计算机为基础的自动化控制指南
| Guide for Computer-Based Control for Hydroelectric Power Plant Automation
|
| ANSI/ISO 5675-1992
| 农业拖拉机和机械.一般用途快速液压接头
| Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
|
| ANSI/SAE J/ISO10567-1998
| 土方机械.液压挖掘机.提升性能
| Earthmoving Machinery - Hydraulic Excavators - Lift Capacity
|
| ANSI/SAE J/ISO7135-1998
| 土方机械.液压挖掘机.术语和商用规范
| Earthmoving Machinery - Hydraulic Excavators - Terminology and Commercial Specifications
|
| ANSI/SAE J1036-1993
| 农用拖拉机圆柱形液压系统管接头的尺寸标准
| Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors
|
| ANSI/SAE J1118-1993
| 摩托车制动系统试验程序用液压阀
| Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
|
| ANSI/SAE J1371-1993
| 液压挖掘机摆动的最低性能和评定程序
| Hydraulic Excavator Swing Minimum Performance and Rating Procedure
|
| ANSI/SAE J1401-1993
| 道路车辆.使用非石油基液压油的液压制动软管组件
| Road Vehicle - Hydraulic Brake Hose Assemblies for Use with Non-Petroleum Base Hydraulic Fluids
|
| ANSI/SAE J1406-1993
| 汽车辆液压制动软管的应用
| Application of Hydraulic Brake Hose to Motor Vehicles
|
| ANSI/SAE J1568-1993
| 液压盘式制动器制动缸塑料活塞用材料
| Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders
|
| ANSI/SAE J1644-1998
| 液力和一般用途金属管联结件.螺纹式液压传动联结件的试验方法
| Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
|
| ANSI/SAE J1790-1998
| 自行式清扫器和擦洗器方向控制要求.单路液压辅助服务系统
| Self-Propelled Sweepers and Scrubbers Steering Requirements - Single-Circuit Hydraulic Servo-Assisted Systems
|
| ANSI/SAE J2244/3-1998
| 液压传动和通用连接.带ISO 261螺纹和O形密封圈的孔及螺柱端.第3部分:轻型(L系列)螺柱端.尺寸、设计、试验方
| Connections for Fluid Power and General Use-Ports and Stud Ends with ISO 261 Threads and O-Rings Sealing - Part 3: Light-Duty (L Series) Stud Ends - Dimensions, Design, Test Methods, and Requirements
|
| ANSI/SAE J2333-1998
| 船舶系统和设备液压系统.油滤选用参数
| Ship Systems and Equipment Hydraulic Systems - Filter Selection Parameters
|
| ANSI/SAE J283-1993
| 配备有三点式悬挂装置的农用拖拉机液压提升能力测量程序
| Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch, Test Procedure for
|
| ANSI/SAE J514-1998
| 液压管件
| Hydraulic Tube Fittings
|
| ANSI/SAE J516-1997
| 液压软管配件
| Hydraulic Hose Fittings
|
| ANSI/SAE J517-1998
| 液压软管
| Hydraulic Hose
|
| ANSI/SAE J518-1993
| 四螺栓拼合法兰型液压法兰管、管道及软管接头
| Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
|
| ANSI/SAE J641-1993
| 液压传动术语
| Hydrodynamic Drives Terminology
|
| ANSI/SAE J648-1993
| 自动变速器的液压控制系统术语
| Automatic Transmission Hydraulic Control Systems Terminology
|
| ANSI/UL 1739-2004
| 消防用液压控制阀
| Pilot-Operated Pressure-Control Valves for Fire-Protection Service
|
| ASME A112.19.13-2001
| 电动液压抽水马桶
| (Electrohydraulic water closets)
|
| ASME A17 Checklist 3-1991
| 液压升降机试验检验检查表(除保安器和配重外的直接柱塞)
| (Checklist for inspection and test of hydraulic elevators (for direct plunger without safeties or counterweights))
|
| ASME A17.2.2-1997
| 液压升降机的检验员手册(包括液压升降机的检验程序)
| (Inspectors' manual for hydraulic elevators (includes inspection procedures for hydraulic elevators))
|
| ASME A17.2.2a Addenda-1998
| 液压升降机的检验员手册.附录
| (Inspectors' manual for hydraulic elevators; Addenda)
|
| ASME PTC 29-1965
| 液压汽轮发电机组的速度调节系统
| (Speed-governing systems for hydraulic turbine-generator units)
|
| ASME Y32.10-1967
| 液压示意图的图形符号
| (Graphic symbols for fluid power diagrams)
|
| ASTM A 822/A 822M-2004
| 液压系统设备用无缝冷拔碳素钢管的标准规范
| Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
|
| ASTM C 109/C 109M-2005
| 液压水泥灰浆的抗压强度标准试验方法(使用2英寸或50毫米管试样)
| Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50-mm] Cube Specimens)
|
| ASTM C 1196-2004
| 用液压千斤顶现场测量实心砌块抗压应力的标准试验方法
| Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
|
| ASTM C 1197-2004
| 用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法
| Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
|
| ASTM C 1306a-2005
| 液用防水薄膜抗静液压力的标准试验方法
| Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
|
| ASTM D 1599-1999
| 塑料管道和配件耐短时液压力的标准试验方法
| Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
|
| ASTM D 2070-1991
| 液压油热稳定性的标准试验方法
| Standard Test Method for Thermal Stability of Hydraulic Oils
|
| ASTM D 2619-1995
| 液压液水解稳定性的标准试验方法(酒瓶法)
| Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
|
| ASTM D 3786-2001
| 织物液压破裂强度的标准测试方法.薄膜破裂强度试验器法
| Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
|
| ASTM D 4174-1989
| 石油液压系统的清理、冲洗及净化的标准实施规程
| Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
|
| ASTM D 4636-1999
| 液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性的试验方法
| Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
|
| ASTM D 4716-2004
| 使用恒定压头测定土工合成织物(在平面中)单位宽度流速和液压透射率的试验方法
| Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
|
| ASTM D 4998-1995
| 评定牵引车液压液磨损特性的标准试验方法
| Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
|
| ASTM D 5306-1992
| 润滑油和液压液线性火焰传播速度的测试方法
| Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
|
| ASTM D 5534-1994
| 液压液体汽相防锈性能的标准试验方法
| Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
|
| ASTM D 5621-2001
| 液压流体的声波剪切稳定性标准试验方法
| Standard Test Method for Sonic Shear Stability of Hydraulic Fluid
|
| ASTM D 5846-2002
| 使用通用氧化试验设备进行液压液和涡轮机油的通用氧化试验的标准试验方法
| Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
|
| ASTM D 5856-1995
| 使用刚性壁压缩模式磁导率计测量多孔性材料液压导电率的标准试验方法
| Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
|
| ASTM D 5912-1996
| 通过超阻尼井回应顶部的瞬息变化测定自由含水层液压导电率的分析程序的标准试验方法
| Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
|
| ASTM D 6006a-1997
| 评定液压流体生物降解性的标准指南
| Standard Guide for Assessing Biodegradability of Hydraulic Fluids
|
| ASTM D 6046-2002
| 环境冲击液压液的标准分类
| Standard Classification of Hydraulic Fluids for Environmental Impact
|
| ASTM D 6080-1997
| 液压流体粘滞特性定义的标准操作
| Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
|
| ASTM D 6158-2005
| 矿物液压油的标准规范
| Standard Specification for Mineral Hydraulic Oils
|
| ASTM D 6351-1999
| 测定液压液低温流动性和表面特性的标准试验方法
| Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
|
| ASTM D 6391-2006
| 使用从钻孔渗流的两个阶段对多孔材料液压传导性限值进行现场测量的标准试验方法
| Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
|
| ASTM D 6519-2005
| 用液压操作的固定活塞采样器进行土壤取样的标准实施规程
| Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
|
| ASTM D 6527-2000
| 用稳态离心法测定多孔介质中不饱和和饱和液压传导性的标准试验方法
| Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
|
| ASTM D 6546-2000
| 工业液压液用弹性密封件能力测定的标准试验方法和建议极限值
| Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
|
| ASTM D 6574-2000
| 径向流动法测定土工合成物(平面)液压透射率的试验方法
| Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
|
| ASTM D 6595-2000
| 用旋转盘电极原子发射光谱法测定已用润滑油或已用液压流体中杂质的标准试验方法
| Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
|
| ASTM D 6766-2006
| 评价被潜在不可溶液体渗透的土工合成粘土衬液压特性的标准试验方法
| Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
|
| ASTM D 6813a-2002
| 活塞泵的液压液性能评定的标准指南
| Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
|
| ASTM D 6973-2005
| 高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法
| Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
|
| ASTM D 7043a-2004
| 定容叶轮泵中石油和非石油液压液的磨损特性指示的标准试验方法
| Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
|
| ASTM D 7044a-2004
| 可生物降解的阻燃型液压液的标准规范
| Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
|
| ASTM E 641-2001
| 农用液压喷嘴的试验的标准方法
| Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
|
| ASTM E 979-1991
| 评估用逆乳液与其它含水液压液作防腐剂的抗微生物制剂的试验方法
| Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
|
| ASTM F 1794-1997
| 手动、球型阀气体(除氧气)和液压系统标准规范
| Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
|
| ASTM F 2164-2002
| 使用静液压的聚乙烯压力管道系统的现场泄漏试验的标准实施规范
| Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
|
| ASTM F 862-1993
| 航空航天液压流体的氯离子浓度及pH值的试验方法
| Test Method for pH and Chloride-Ion Concentration of Aerospace Hydraulic Fluids
|
| UL 1469-1995
| 回流专用止回阀的阀身强度和液压损失率检验
| (Strength of body and hydraulic pressure loss testing of backflow special check valves )
|
| UL 1739-1994
| 消防设备用液压控制的压力控制阀
| (Pilot-operated pressure-control valves for fire-protection service )
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com