5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




美国润滑油标准(ANSI lubrication standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号 中文名称 英文名称
ANSI/AGMA 9001-B-1997 柔性耦合器.润滑 Flexible Couplings - Lubrication
ANSI/AGMA 9005-E-2002 工业齿轮润滑 Industrial Gear Lubrication
ANSI/ANS 59.52-1998 安全相关应急柴油发电机用润滑油系统 Lubricating Oil Systems for Safety-Related Emergency Diesel Generators
ANSI/API 614-1999 特殊目的用润滑油、轴封和控制油系统 Lubrication, Shaft-Sealing, and Control-Oil Systems for Special-Purpose Applications
ANSI/ASHRAE 41.4-1996 液体制冷剂中润滑油比例的测量方法 Method for Measurement of Proportion of Lubricant in Liquid Refrigerant
ANSI/ASME A112.14.6-2006 脂肪、油和润滑脂(FOG)排除系统 FOG (Fats, Oils & Greases) Disposal Systems
ANSI/ASTM D1091-2000 润滑油和添加剂中磷含量测试方法(05.01) Test Methods for Phosphorus in Lubricating Oils and Additives (05.01)
ANSI/ASTM D1092-2005 润滑脂表观粘度的测试方法 Test Method for Apparent Viscosity of Lubricating Greases
ANSI/ASTM D1263-1994 机动车车轮轴承润滑脂的泄漏倾向.试验方法 Leakage Tendencies of Automotive Wheel Bearing Greases, Method of Test for (05.01)
ANSI/ASTM D1264-2003 测定润滑脂的水冲洗特性的试验方法 Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ANSI/ASTM D128-1998 润滑油脂分析方法,(05.01)法 Analysis of Lubricating Grease, Methods of (05.01)
ANSI/ASTM D1403-2002 用四分之一和二分之一标度的锥度设备测定润滑脂针入度的试验方法(05.01) Test Method for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment (05.01)
ANSI/ASTM D1404-1999 润滑脂中有害颗粒估计.试验方法 Estimation of Deleterious Particles in Lubricating Grease, Method for (05.01)
ANSI/ASTM D1478-2007 滚珠轴承润滑脂的低温扭矩试验方法 Test Method for Low-temperature Torque of Ball Bearing Grease
ANSI/ASTM D1742-2006 存储中润滑油和脂分离的试验方法(05.01) Oil Separation from Lubricating Grease during Storage, Test Method for (05.01)
ANSI/ASTM D1743-2005 测定润滑脂防腐蚀特性的试验方法 Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ANSI/ASTM D1831-2001 润滑脂横向滚动稳定性测试方法 Test Method for Roll Stability of Lubricating Grease
ANSI/ASTM D217-2002 润滑脂圆锥贯入试验方法 Cone Penetration of Lubricating Grease, Method of Test for (05.01)
ANSI/ASTM D2265-2006 超过宽温度范围的润滑脂的滴定点测试方法 Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ANSI/ASTM D2266-2001 润滑脂耐磨损特性试验方法(四球法) Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) (05.01)
ANSI/ASTM D2273-2005 润滑油痕迹沉淀测试方法 Test Method for Trace Sediment in Lubricating Oils
ANSI/ASTM D2422-1997 用粘度系统对工业液体润滑剂的分类 Classification of Industrial Fluid Lubricants by Viscosity System
ANSI/ASTM D2509-2003 测量润滑脂承载能力的试验方法(泰姆肯试验法)(05.01) Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) (05.01)
ANSI/ASTM D2510-2004 固态薄膜润滑剂的粘合性的试验方法 Test Method for Adhesion of Solid Film Lubricants
ANSI/ASTM D2511-1983 干式固体薄膜润滑剂的热冲击敏感性的试验方法(05.01) Thermal Shock Sensitivity of Dry Solid Film Lubricants, Methods of Test for (05.01)
ANSI/ASTM D2532-2004 低温静止后飞机燃气涡轮发动机润滑剂的粘度和粘度变化的试验方法 Viscosity and Viscosity Change after Standing at Low Temperature of Aircraft Turbine Lubricants, Method of Test for (05.01)
ANSI/ASTM D2595-1997 宽温度范围润滑脂蒸发损耗测试方法(05.01) Evaporation Loss of Lubricating Greases over Wide-Temperature Range, Method of Test for (05.01)
ANSI/ASTM D2596-1997 润滑脂超高压特性测量方法(四球法)(05.01) Method for Measurement of Extreme-Pressure Properties of Lubricating Greases (Four-Ball Method) (05.01)
ANSI/ASTM D2625-1994 干性固态薄膜润滑剂的耐久(磨损)寿命和承载能力的测定方法(润滑剂耐热耐压法)(05.02) Determining Endurance (Wear) Life and Load-Carrying Capacity of Dry Sold Film Lubricants (Falex Method), Method for (05.02)
ANSI/ASTM D2649-2004 干性固态薄膜润滑剂的腐蚀特性的测定方法 Corrosion Characteristics of Dry Sold Film Lubricants, Method for Determining (05.02)
ANSI/ASTM D2670-1994 液体润滑剂的耐磨损性的测量方法(润滑剂的耐热耐压法)(05.02) Measuring Wear Properties of Fluid Lubricants (Falex Method), Method for (05.02)
ANSI/ASTM D2711-2001 润滑油乳化分解性测定方法(05.02) Demulsibility Characteristics of Lubricating Oils, Method of Test for (05.02)
ANSI/ASTM D2711a-2001 润滑油抗乳化性特征试验方法 Test Method for Demulsibility Characteristics of Lubricating Oils
ANSI/ASTM D2715-1992 真空中润滑剂挥发率的试验方法 Test Method for Volatilization Rates of Lubricants in Vacuum
ANSI/ASTM D2782-2002 润滑流体耐极端压力特性的测量方法(泰姆肯试验方法)(05.02) Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method), Method for (05.02)
ANSI/ASTM D2783-2003 润滑液极压特性测量的试验方法(四球法) Test Method for Measurement of Extreme-pressure Properties of Lubricating Fluids Four-ball Method
ANSI/ASTM D2878-1995 评估润滑油的表观蒸气压力和分子重量的方法(05.02) Method for Estimating Apparent Vapor Pressures and Molecular Weight of Lubricating Oils (05.02)
ANSI/ASTM D2893-2004 超高压润滑油的氧化特性的试验方法 Test Method for Oxidation Characteristics of Extreme Pressure Lubricating Oils
ANSI/ASTM D2981-1994 振动中粘性固态薄膜润滑剂的耐磨寿命的测量方法(05.02) Measuring the Wear Life of Bonded Solid Film Lubricants in Oscillating Motion, Test Method for (05.02)
ANSI/ASTM D2982-1998 已用润滑油中乙二醇基防冻剂检测的试验方法(05.02) Detecting Glycol-Base Antifreeze in Used Lubricating Oils, Method of Test for
ANSI/ASTM D2983-2004 用Brookfield粘度计测定机动车试验液体润滑剂的低温粘度的试验方法 Low-Temperature Viscosity of Automotive Test Fluid Lubricants Measured by Brookfield Viscometer, Method of Test for (05.02)
ANSI/ASTM D3115-1995 在高剪切力作用下润滑剂对宇航合金的爆炸反应性的试验方法(05.02) Explosive Reactivity of Lubricants with Aerospace Alloys under High Shear, Method of Test for (05.02)
ANSI/ASTM D3228-2005 利用改良的凯氏(测定氮)法对润滑油和燃油中的总氮量进行测定的方法 Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ANSI/ASTM D3233-1993 液体润滑剂的极端压力特性的测量方法(润滑剂耐热耐压法)(05.02) Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Methods), Methods for (05.02)
ANSI/ASTM D3336-2005 在高温条件下滚珠轴承润滑油脂寿命的测试方法 Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ANSI/ASTM D3340-1998 火焰光度计测定润滑脂锂和钠的方法(05.02) Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (05.02)
ANSI/ASTM D3342-1990 新(未用过的)冷轧润滑油在水中弥散的乳化稳定性的测量方法(05.02) Test Method for Dispersion Stability of New Unused Rolling Oil Dispersions in Water
ANSI/ASTM D3527-2007 机动车轮轴轴承润滑脂的寿命性能用试验方法 Test Method for Life Performance of Automotive Wheel Bearing Grease
ANSI/ASTM D3702-1994 用止推垫圈试验机测定在非润滑摩擦接触中材料的磨损率的试验(05.02) Wear Rate of Materials in Unlubricated Rubbing Contact Using a Thrust Washer Testing Machine, Test for (05.02)
ANSI/ASTM D3704-1996 在震荡运动中用润滑剂耐热耐压试验机测定润滑脂的耐磨损特性的试验(05.02) Test Method for Wear Preventive Properties of Lubricating Greases Using the Falex Block on Ring Test Machine in Oscillating Motion
ANSI/ASTM D3705-1998 润滑液雾状属性标准测试方法 Standard Test Method for Misting Properties of Lubricating Fluids
ANSI/ASTM D4047-2005 用喹啉磷钼酸盐法测定润滑油及添加剂中磷含量的试验方法 Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ANSI/ASTM D4048-2002 用铜带生锈试验检测润滑油对铜腐蚀的方法 Method for Detection of Copper Corrosion from Lubricating Grease by the Copper Strip Tarnish Test (05.02)
ANSI/ASTM D4049-2006 测定润滑脂耐水喷射性用试验方法 Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ANSI/ASTM D4056-2001 烃类和脂肪族脂化润滑剂中水的可溶性 Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
ANSI/ASTM D4170-1997 润滑脂磨损侵蚀防护试验方法(05.02) Test Method for Fretting Wear Protection by Lubricating Grease (05.02)
ANSI/ASTM D4172-1994 润滑液防磨性试验方法(四球法) Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method), Method of Test for (05.02)
ANSI/ASTM D4175-2005 石油、石油产品和润滑剂的相关术语 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ANSI/ASTM D4241-1999 燃气轮机润滑油系统的设计(05.02) Gas Turbine Generator Lubricating Oil System, Design of (05.02)
ANSI/ASTM D4289-2003 润滑脂与弹性体兼容性的试验方法 Method of Testing Compatibility of Lubricating Grease with Elastomers (05.02)
ANSI/ASTM D4290-2007 在加速条件下测定汽车轮轴轴承润滑脂渗漏倾向的试验方法 Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ANSI/ASTM D4293-1983 涡轮机润滑用磷酸盐酯基液体规范 Phosphate Ester Based Fluids for Turbine Lubrication, Specification for (05.02)
ANSI/ASTM D4304a-2006 汽轮机或燃气轮机用矿物润滑油规范 Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
ANSI/ASTM D4425-1997 离心法从润滑脂中分离油的方法(Koppers法)(05.02) Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method) (05.02)
ANSI/ASTM D4628-2005 利用原子光谱吸收法分析从未使用的润滑油中钡、钙、镁和锌的试验方法 Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic ABSorption Spectrometry
ANSI/ASTM D4636-1998 液压油、航空透平引擎润滑剂和其他高精炼油的腐蚀与氧化稳定性测试方法 Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ANSI/ASTM D4682-1996 二冲程汽油发动机润滑油与汽油的混溶性和流动性规范 Specification for Miscibility with Gasoline and the Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
ANSI/ASTM D4693-2004 润滑脂润滑的车轮轴承低温扭矩的试验方法 Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ANSI/ASTM D4857-2004 令二冲程循环汽油发动机(外侧发动机除外)中活塞环结胶和活塞沉积物最小化的润滑剂作用的测定 Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards, Test Method for (05.03)
ANSI/ASTM D4858-2002 润滑剂促使两冲程汽油发动机预点火可能性的测定方法 Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines, Test Method for (05.03)
ANSI/ASTM D4859-1997 二冲程汽油发动机用TC润滑剂规范(05.03) Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines - TC, Specification for (05.03)
ANSI/ASTM D4863-2002 两冲程汽油发动机润滑剂的润滑性测定 Determination of the Lubricity of Two-Stroke Cycle Gasoline Engine Lubricants (05.03)
ANSI/ASTM D4927-2005 润滑剂和添加料的元素分析试验方法.用波长色散X射线荧光分析法测定钡、钙、磷、硫和锌(05.02) Test Methods for Elemental Analysis of Lubricant and Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence (05.02)
ANSI/ASTM D4950-2001 机动车设备用润滑油的分类和规范 Classification and Specification for Automotive Service Greases
ANSI/ASTM D4951-2006 感应耦合等离子体原子发射光谱法测定润滑油添加元素的方法 Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ANSI/ASTM D5001-2006 用球柱式润滑性评定仪(BOCLE)测量航空涡轮燃料润滑性的试验方法 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ANSI/ASTM D5133-2005 温度扫描法测试润滑油的低温低剪切率粘性/温度关系的试验方法 Test Method for Low Temperature, Low Shear Rate Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ANSI/ASTM D5183-2005 用四球磨损试验机测定润滑油摩擦系数的试验方法 Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
ANSI/ASTM D5185-2005 在已被使用过的润滑中利用油感应耦合等离子体原子发射光谱法测定添加物质、磨损金属和污染物的试验方法 Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (05.03)
ANSI/ASTM D5291-2002 石油产品和润滑剂中碳、氢和氮含量的仪器测定用试验方法 Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ANSI/ASTM D5306-1997 润滑油和液压液的线性传播速率的测试新方法 New Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids (05.03)
ANSI/ASTM D5483-2005 利用压力差示扫描量热法测定润滑油脂氧化诱导时间的试验方法 Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ANSI/ASTM D5579-2006 循环耐久试验中人力操纵传动润滑剂耐热性评估测试方法 Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
ANSI/ASTM D5620-1999 在排水和干燥模式下利用针式和V-块式试验机评价薄膜流动性润滑剂性能的测试方法 (05.03) Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and V-Block Test Machine (05.03)
ANSI/ASTM D566-2002 润滑脂滴点试验方法(05.01) Test Method for Dropping Point of Lubricating Grease (05.01)
ANSI/ASTM D5704-2007 手动传输和主传动轴用润滑油的热稳定性和氧化稳定性评价的试验方法 Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
ANSI/ASTM D5706-2005 用高频、线性振动(SRV)试验机测定润滑油脂超压特性的试验方法(05.03) Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine (05.03)
ANSI/ASTM D5707-2005 用于高频、线性振动(SRV)试验机测量润滑油脂的摩擦力与磨损特性测定试验 Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-frequency, Linear-oscillation (SRV) Test Machine
ANSI/ASTM D5760-2005 人工传输齿轮润滑剂性能规范(05.03) Specification for Performance of Manual Transmission Gear Lubricants (05.03)
ANSI/ASTM D5770-2002 氧化测试期间润滑油酸值半定量微观测定用试验方法 Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ANSI/ASTM D5800a-2005 Noack法测定润滑油的蒸发损失的试验方法 Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ANSI/ASTM D5815-1995 用液相色谱法测定线性低密度聚乙烯中酚醛阻氧化剂和 Erucamide润滑添加剂的方法 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low Density Polyethylene Using Liquid Chromatography (LC)
ANSI/ASTM D5864-2005 测定润滑剂或其组分的水中需氧生物降解的试验方法 Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components
ANSI/ASTM D5969-2005 在含稀释合成海水环境下测定润滑脂防腐性能的试验方法 Test Method for Corrosion-Preventive Properties of Lubricating Greases in the Presence of Dilute Synthetic Sea Water Environments
ANSI/ASTM D5984-1997 用显色指示剂滴定法测定新的和使用过的润滑剂中碱值的半定量现场试验方法 Test Method for Semi-quantitative Field Test Method for Base Number in New and Used Lubricants by Color-indicator Titration
ANSI/ASTM D6074-1999 氢类润滑剂机油特性指南 Guide for Characterizing Hydrocarbon Lubricant Base Oils
ANSI/ASTM D6078-2004 通过磨损负载下气缸上球润滑性鉴定器(SLBOCLE)评价柴油燃料润滑性的试验方法 Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-On-Cylinder Lubricity Evaluator (SLBOCLE)
ANSI/ASTM D6079-2004 用高频往复移动式装置评价柴油燃料润滑性的试验方法 Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ANSI/ASTM D6081-1997 润滑油对水边植物毒性测试惯例:样品制备和结果解释 Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparataion and Results Interpretation
ANSI/ASTM D6082-2006 润滑油高温泡沫特性试验方法 Test Method for High Temperature Foaming Characteristics of Lubricating Oils
ANSI/ASTM D6121a-2006 评价在低速和高扭矩条件下准双曲面主齿轮驱动轴用润滑剂负载能力的试验方法 Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ANSI/ASTM D6138-2007 在动态潮湿条件下润滑脂的防腐蚀特性测定的试验方法(EMCOR方法) Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
ANSI/ASTM D6139-2000 润滑剂或其组分需氧水生生物降解测定的标准Gledhill摇动烧瓶试验法 Standard Gledhill Shake Flask Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or their Components
ANSI/ASTM D6184-1997 从润滑脂中分离油的标准试验方法(锥形筛方法) Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
ANSI/ASTM D6185-1997 润滑脂两元混合物兼容性评估试验方法 Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
ANSI/ASTM D6186-1997 利用压力差示扫描量热法(PDSC)测定润滑油氧化诱导时间定测定方法 Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ANSI/ASTM D6203-2006 导轨润滑剂热稳定性的试验方法 Test Method for Thermal Stability of Way Lubricants
ANSI/ASTM D6224-2002 辅助动力装置的润滑油的使用监测实施规范 Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ANSI/ASTM D6300a-2007 石油产品和润滑剂试验方法中使用的精确度和偏差数据测定的实施规程 Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ANSI/ASTM D6304-2007 用库仑卡尔费歇尔(Coulometric Karl Fischer)滴定法测定石油产品、润滑油和添加剂中含水量的试验方法 Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ANSI/ASTM D6375-2005 用热重分析仪(TGA)Noack法测定润滑油蒸发损耗的试验方法 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ANSI/ASTM D6384-1999 润滑剂和润滑剂合成物生物降解性和生态性术语 Terminology Relating to Biodegradability and Ecotoxicity of Lubricants and Lubricant Components
ANSI/ASTM D6425-2005 用SRV试验机测量EP润滑油摩擦和磨损特性的试验方法 Test Method for Measuring Friction and Wear Properties of EP Lubricating Oils Using the SRV Test Machine
ANSI/ASTM D6439-2005 蒸汽、气体和水电涡轮润滑系统的清洁、冲洗和纯化指南 Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems
ANSI/ASTM D6443-2004 用波长散射X射线荧光光谱法测定未用过的润滑油和添加剂中的钙、氯、铜、镁、磷、硫和锌的试验方法 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-Ray Fluorescence Spectrometry (Mathematical)
ANSI/ASTM D6448-2004 来自废润滑油的工业锅炉燃料规范 Specification for Industrial Burner Fuels from Used Lubricating Oils
ANSI/ASTM D6481-1999 能量散射X射线荧光谱仪测定润滑油中磷,硫,钙,锌含量的方法 Test Method for Determination of Phosphorus, Sulfur, Calcium and Zinc in Lubricating Oils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ANSI/ASTM D6547-2000 双金属耦合润滑液流腐蚀性试验方法 Test Method for Corrosiveness of a Lubricating Fluid to a Bi-Metallic Couple
ANSI/ASTM D6553-2000 润滑油的冷冻液相容性试验方法 Test Method for Coolant Compatibility of Way Lubricants
ANSI/ASTM D6595-2005 用转盘电极原子发射光谱法测定已用润滑油或已用液压液中磨损金属和杂质的试验方法 Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ANSI/ASTM D6731-2001 关闭的透气性测定器中润滑剂或润滑剂组分的有氧生物降解性和水中生物降解性的测定方法 Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
ANSI/ASTM D6792-2007 石油产品和润滑剂测试实验室中的质量体系指南 Guide for a Quality System in Petroleum Products and Lubricants Testing Laboratories
ANSI/ASTM D6821-2002 恒定剪切应力粘度计传动线路润滑剂粘度测定方法 Test Method for Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ANSI/ASTM D6823-2002 掺有废润滑油的商用锅炉燃料标准规范 Standard Specification for Commercial Boiler Fuels with Used Lubricating Oils
ANSI/ASTM D6898-2003 用喷油泵装置评价柴油润滑性的试验方法 Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
ANSI/ASTM D7038-2007 汽车齿轮润滑剂的耐潮湿腐蚀评估用试验方法 Test Method for the Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
ANSI/ASTM D7040-2004 用感应耦合等离子体原子辐射光谱测定法测定Gf 4润滑油中低能磷的试验方法 Test Method for Determination of Low Levels of Phosphorus in Gf 4 Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry"
ANSI/ASTM D7066-2004 用红外测定法测定三氟氯乙烯(s-316)可回收石油和润滑脂及非极性材料的二聚物/三聚物的试验方法 Test Method for Dimer/Trimer of Chlorotrifluoroethylene (s-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ANSI/ASTM D7098-2006 用薄膜氧吸收(TFOUT)催化剂B测定润滑剂氧化稳定性的试验方法 Test Method for Oxidation Stability of Lubricants by Thin-film Oxygen Uptake (TFOUT) Catalyst B
ANSI/ASTM D7155-2007 评估涡轮机润滑油混合物兼容性的实施规程 Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ANSI/ASTM D7214-2007 利用峰面积积分用FT-IR测定已使用润滑剂中氧化物的试验方法 Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ANSI/ASTM D7260-2006 石油产品和润滑油天然成分分析用电感耦合等离子体原子发射光谱仪的最佳校准和确认的标准实施规程 Standard Practice for Optimization, Calibration and Validation of Inductively Coupled Plasma-atomic Emission Spectrometry (icp-aes) for the Elemental Analysis of Petroleum Products and Lubricants
ANSI/ASTM D7303-2007 用感应耦合等离子原子发射光谱法测定润滑脂中的金属含量用标准试验方法 Standard Test Method for the Determination of Metals in Lubricating Greases by Inductively Coupled Plasama Atomic Emission Spectrometry
ANSI/ASTM D7317a-2007 用纸过滤废润滑油中凝结戊烷不溶物的试验方法(LMOA法) Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ANSI/ASTM D7342-2007 水存在下润滑脂剪切稳定性的试验方法(水稳定性试验) Test Method for Shear Stability of Lubricating Grease in the Presence of Water (water Stability Test)
ANSI/ASTM D7343-2007 石油产品和润滑剂元素分析用X射线荧光光谱法的优化、制样、校正和鉴定的实施规程 Practice for Optimization, Sample Handling, Calibration and Validation of X-ray Fluorescence Spectrometry Methods for the Elemental Analysis of Petroleum Products and Lubriants
ANSI/ASTM D7373-2007 用生物动力学模型预测润滑剂的生物降解能力用试验方法 Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
ANSI/ASTM D874-2006 润滑油和添加剂中硫酸盐类灰分测试方法 Test Method for Sulfated Ash from Lubricating Oils and Additives
ANSI/ASTM D892-2006 润滑油起泡特性的试验方法 Test Method for Foaming Characteristics of Lubricating Oils
ANSI/ASTM D893a-2005 用过的润滑油中不溶物质的试验方法(05.01) Insolubles in Used Lubricating Oils, Method of Test for (05.01)
ANSI/ASTM D91-2002 润滑油沉淀值的试验方法 Test Method for Precipitation Number of Lubricating Oils
ANSI/ASTM D942-2002 用氧压容器法测定润滑脂的氧化稳定性用试验方法 Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
ANSI/ASTM D972-2002 润滑脂及油(05.01)蒸发损失试验方法 Test Method for Evaporation Loss of Lubricating Greases and Oils (05.01)
ANSI/ASTM F1567-1997 机加或铸造的自清洁燃料油和润滑油过滤器规范 Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ANSI/ASTM F670-2003 5和10加仑(20和40升)的润滑油配料容器规范 Specification for Tanks, 5- and 10-Gal (20- and 40-L) Lube Oil Dispensing
ANSI/IEEE 1210-2004 使用电线和电缆测定电缆润滑剂可混用性的标准试验 Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable
ANSI/SAE J1468-1993 油-空气式润滑油冷却器的冷却性能应用试验 Application Testing of Oil-to-Air Oil Coolers for Cooling Performance
ANSI/SAE J2116-1993 二冲程汽油发动机润滑剂的性能和轻级滑油分类 Two-Stroke-Cycle Gasoline Engine Lubricants, Performance and Service Classification
ANSI/SAE J300-1993 发动机润滑油的粘度分类 Engine Oil Viscosity Classification
ANSI/SAE J304-1993 发动机润滑油的试验 Engine Oil Tests
ANSI/SAE J306-1998 轴及手动变速器用汽车齿轮润滑剂粘度的分类 Automotive Gear Lubricant Viscosity Classification, Axle and Manual Transmission
ANSI/SAE J310-1993 汽车用润滑脂 Automotive Lubricating Greases
ANSI/SAE J534-1998 润滑配件 Lubrication Fittings
ANSI/UL 1978-2005 润滑脂管道的安全标准 Standard for Safety for Grease Ducts
ASME B5.28-1971 机床润滑和冷却泵的装配尺寸 (Mounting dimensions of lubricating and coolant pumps for machine tools)
ASTM D 1091-2000 润滑油和添加剂中磷含量的标准试验方法 Standard Test Methods for Phosphorus in Lubricating Oils and Additives
ASTM D 1092-2005 润滑脂测量表观粘度的标准试验方法 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
ASTM D 1263-1994 汽车轮轴承润滑脂泄漏倾向的标准试验方法 Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases
ASTM D 1264-2003 确定润滑脂抗水洗特性的标准试验方法 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 128-1998 润滑脂的分析标准试验方法 Standard Test Methods for Analysis of Lubricating Grease
ASTM D 1401-2002 石油润滑油与合成燃料的水分离特性的标准试验方法 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 1403-2002 用1/4和1/2标度锥形设备测定润滑脂锥入度的标准试验方法 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
ASTM D 1404/D 1404M-1999 评定润滑脂中有害粒子的标准试验方法 Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
ASTM D 1478-2007 滚珠轴承润滑脂的低温扭矩用标准试验方法 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
ASTM D 1662-1992 切削润滑油中活性硫的标准试验方法 Standard Test Method for Active Sulfur in Cutting Oils
ASTM D 1742-2006 贮存过程中油从润滑脂中分离的标准试验方法 Standard Test Method for Oil Separation from Lubricating Grease During Storage
ASTM D 1743a-2005 润滑脂防腐蚀性能测定的标准试验方法 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 1831-2000 润滑脂滚轧稳定性的标准试验方法 Standard Test Method for Roll Stability of Lubricating Grease
ASTM D 1996-1997 用液相色谱法(LC)测定低浓度聚乙烯中酚醛抗氧剂和棕榈纤维酰胺润滑添加剂的试验方法 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)
ASTM D 217-2002 润滑脂锥头针入度的标准试验方法 Standard Test Methods for Cone Penetration of Lubricating Grease
ASTM D 2265-2006 超宽温度范围润滑脂滴点的标准试验方法 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 2266-2001 润滑脂耐磨特性的标准试验方法(四球法) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
ASTM D 2273-2005 润滑油中痕量沉积物的试验方法 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D 2422-1997 通过粘度体系对工业液态润滑剂的标准分类 Standard Classification of Industrial Fluid Lubricants by Viscosity System
ASTM D 2501-1991 石油润滑油粘度-重力常数(VGC)的计算试验方法 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 2502-2004 粘度测量法估算石油润滑油分子量(相对分子量)的标准试验方法 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D 2509-2003 润滑脂负载能力的标准试验方法(泰姆肯法) Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
ASTM D 2510-1994 固态膜润滑剂的粘附性标准试验方法 Standard Test Method for Adhesion of Solid Film Lubricants
ASTM D 2511-1993 固态薄膜润滑剂热震敏感度的标准试验方法 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
ASTM D 2532-2003 航空汽轮机润滑剂承受低温后粘度和粘度变化的标准测试方法 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D 2595-1996 过宽温度范围内润滑油蒸发损失的标准试验方法 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
ASTM D 2596-1997 润滑脂极压性能的标准试验方法(四球法) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D 2625-1994 固态薄膜润滑剂的寿命持久性和荷载能力的标准试验方法(法列克司钉及V形物法) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
ASTM D 2649-2004 固态薄膜润滑剂腐蚀特性的标准试验方法 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM D 2670-1995 液态润滑剂耐磨性能的测定(润滑剂耐热耐压法)的标准试验方法 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
ASTM D 2711a-2001 润滑油的反乳化性的标准试验方法 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
ASTM D 2715-1992 真空中润滑剂挥发速率的标准试验方法 Standard Test Method for Volatilization Rates of Lubricants in Vacuum
ASTM D 2782-2002 润滑液极端压力特性的标准试验法(泰姆肯法) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
ASTM D 2783-2003 润滑油极压特性测量的标准试验方法(四球法) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM D 2835-1989 混凝土铺面用预制压缩密封物安装用润滑剂的标准规范 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D 2878-1995 润滑油表面蒸气压力和分子量评估的标准试验方法 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D 2893-2004 耐特高压润滑油氧化特性的标准试验方法 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
ASTM D 2981-1994 摆动中固态膜润滑剂磨损寿命的标准试验方法 Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D 2982-1998 检测已用润滑油中乙二醇基防冻剂的标准试验方法 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D 2983a-2004 用Brookfield粘度计测量润滑剂低温粘度的标准试验方法 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 3115-1995 高剪切应力下润滑剂与航空用合金爆炸反应性的标准试验方法 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 3228-2005 用改进的克椰达方法测定润滑油及燃料油中总氮量的标准试验方法 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 3233-1993 液态润滑剂极压性能的试验方法(润滑油耐热耐压法) Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
ASTM D 3336-2005 高温下滚珠轴承中润滑脂使用寿命的标准试验方法 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D 3337-1991 小型滚珠轴承中润滑脂使用寿命和转矩测定的标准试验方法 Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
ASTM D 3340-1998 用火焰光度计策动润滑油脂中锂和钠的试验方法 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D 3527-2007 汽车轮轴轴承润滑脂的寿命性能用标准试验方法 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 3650-1993 用萤光分析法比较水中石油润滑油的方法 Test Method for Comparison of Waterborne Petroleum Oils by Fluorescence Analysis
ASTM D 3702-1994 用止推垫圈试验机测定自润滑磨擦接触中材料磨损速率和摩擦系数的标准试验方法 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
ASTM D 3704-1996 在摆动运动中使用法列克司环和块磨擦试验机测定润滑脂防磨性的标准试验方法 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
ASTM D 3705-1986 润滑液起雾性能的标准试验方法 Standard Test Method for Misting Properties of Lubricating Fluids
ASTM D 4047-2000 喹啉磷钼酸盐法测定润滑油和添加剂中磷的标准试验方法 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ASTM D 4048-2002 检测润滑油脂对铜的腐蚀的标准试验方法 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
ASTM D 4049-2006 测定润滑脂耐水喷射性的标准试验方法 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ASTM D 4056-2001 评定水在烃和脂肪酯润滑剂中溶解度的标准试验方法 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
ASTM D 4170-1997 润滑脂对流水侵蚀磨损保护性的标准试验方法 Standard Test Method for Fretting Wear Protection by Lubricating Greases
ASTM D 4172-1994 润滑液防磨损特性的标准试验方法(四球法) Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
ASTM D 4175-2005 与石油、石油产品和润滑剂相关的标准术语 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4241-1998 气体涡轮发电机润滑油系统设计的标准实施规范 Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems
ASTM D 4248-1998 蒸气涡轮发电机润滑油系统设计的标准实施规范 Standard Practice for Design of Steam Turbine Generator Oil Systems
ASTM D 4281-1995 石油和润滑脂(碳氟化物可提取的物质)的重量测定标准试验方法 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
ASTM D 4289-2003 润滑脂及润滑液与弹性材料的配伍性的标准试验方法 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 4290-2007 在加速条件下测定汽车轮轴轴承润滑脂的渗漏倾向用标准试验方法 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ASTM D 4293-1983 涡轮机润滑用磷酸酯基液体的标准规范 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication
ASTM D 4304a-2006 蒸汽或燃气轮机中用矿物润滑剂的标准规范 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
ASTM D 4425-1997 离心法从润滑脂中分离油的标准试验方法(科佩斯法) Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)
ASTM D 4628-2005 原子吸收光谱法分析未用润滑油中钡、钙、镁和锌的标准试验方法 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
ASTM D 4636-1999 液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性的试验方法 Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ASTM D 4682-1987 二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
ASTM D 4693-2003 润滑脂润滑的车轮轴承低温扭转的标准试验方法 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D 4857-2003 将二冲程循环汽油发动机(外侧发动机除外)中的活塞环结胶和活塞积垢减到最小的润滑油能力测定用标准试验方法 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM D 4858-2002 测定润滑油对改进二冲程循环汽油发动机预燃倾向的标准试验方法 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
ASTM D 4859-1997 二冲程循环汽油发动机用润滑油标准规范 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
ASTM D 4863-2002 测定二冲程循环汽油发动机润滑剂润滑性的标准试验方法 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
ASTM D 4927-2005 润滑剂和添加剂元素分析的标准试验方法.用波长色散的X-射线荧光光谱测定法测定钡、钙、磷、硫和锌的含量 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 4950-2001 汽车保养润滑脂的标准分类和规范 Standard Classification and Specification of Automotive Service Greases
ASTM D 4951-2006 用感应耦合等离子体原子发射光谱法测定润滑油中添加剂的标准试验方法 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 5001-2006 用球柱式润滑性评定仪(BOCLE)测量航空涡轮燃料润滑性的标准试验方法 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 5133-2005 采用温度扫描技术的润滑油的低温、低剪切率、粘性/温度关系的标准试验方法 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D 5183-2005 用四球磨损试验机测定润滑剂摩擦系数的标准试验方法 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
ASTM D 5185-2005 用感应耦合等离子体原子发射光谱法(ICP-AES)测定使用过的润滑油中的添加元素、磨损金属和污染物以及原油中 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5291-2002 仪器测定石油产品及润滑剂中碳、氢和氮含量的标准试验方法 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 5306-1992 润滑油和液压液线性火焰传播速度的测试方法 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM D 5346-1993 测定油乳液和软化化合物用石油润滑油倾点的试验方法 Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
ASTM D 5579-2006 循环耐久性试验中人工传动装置用润滑剂热稳定性评价的标准试验方法 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
ASTM D 5620-1994 使用销钉和V形块试验机以排水和干燥方式评定薄膜流体润滑油的标准试验方法 Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine
ASTM D 566-2002 润滑脂滴点的标准试验方法 Standard Test Method for Dropping Point of Lubricating Grease
ASTM D 5704-2007 手动传输和主传动轴用润滑油热稳定性和氧化稳定性的评估用标准试验方法 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
ASTM D 5760-2005 人工传动齿轮润滑油性能的标准规范 Standard Specification for Performance of Manual Transmission Gear Lubricants
ASTM D 5770-2002 用十六倍显微镜测量氧化试验中润滑油酸值的标准试验方法 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D 5800-2005 用Noack法测定润滑油蒸发损失的标准试验方法 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 5862-2006 评估两冲程循环装有涡轮增压器的6V92TA柴油发动机中机器润滑油的标准试验方法 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
ASTM D 5864-2005 测定润滑油及其成分水中好氧生物降解性的标准试验方法 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
ASTM D 5969-2005 在含稀释合成海水环境下测定润滑脂防腐蚀性能的标准试验方法 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D 5984-1997 利用显色指示剂滴定法测试新的和已用过的润滑剂碱值的半定量现场试验法的标准试验方法 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
ASTM D 6042-2004 用液相色谱法对聚丙烯均聚物配方中酚醛抗氧化剂和酰胺纤维润滑添加剂测定的标准试验方法 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
ASTM D 6074-1999 烃类润滑基油特性的标准导则 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
ASTM D 6078-2004 通过磨损负载下气缸上球润滑性鉴定器评价柴油燃料润滑性的标准试验方法 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
ASTM D 6079-2004 利用高频往复设备(HFRR)评价柴油燃料润滑性的标准试验方法 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 6081-1998 润滑剂水中毒性试验的标准操作规程:样品制备和结果判断 Standard Practice for Aquatic Toxicity Testing of lubricants: Sample Preparation and Results Interpretation
ASTM D 6082-2006 润滑油高温起泡特性的标准试验方法 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
ASTM D 6121a-2006 评估主双曲面齿轮传动轴低速和高扭矩条件的润滑剂承载能力的标准试验方法 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D 6138-2007 在动态潮湿条件下润滑脂的防腐蚀性能的测定用标准试验方法(EMCOR方法) Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
ASTM D 6139-2000 用Gledhill摇瓶测定润滑剂或其化合物需氧水中生物降解性的标准试验方法 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
ASTM D 6184-1998 从润滑脂中分离油的标准试验方法(锥形筛方法) Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
ASTM D 6185-1997 评价润滑脂的二元混合物相容性的标准规程 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
ASTM D 6186-1998 利用压差扫描量热法(PDSC)测试润滑油的氧化感应时间的标准试验方法 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D 6203-2006 导轨润滑剂的热稳定性的标准试验方法 Standard Test Method for Thermal Stability of Way Lubricants
ASTM D 6224-2002 附属动力工厂设备用润滑油运行中检测的标准实施规程 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 6300-2007 石油产品和润滑剂试验方法中使用的精确度和偏差数据测定的标准实施规程 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6304-2007 用库仑卡尔费歇尔滴定法测定石油产品、润滑油和添加剂中水含量的标准试验方法 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D 6375-2005 用热重分析仪(TGA)Noack法测定润滑油蒸发损失的标准试验方法 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D 6384a-1999 润滑剂的生物降解性和生态毒性的相关标准术语 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
ASTM D 6425-2005 用SRV试验机测量极压(EP)润滑油摩擦和磨损特性的标准试验方法 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
ASTM D 6439-2005 汽轮机、燃气轮机和水电轮机润滑系统的清洁、冲洗和净化的标准指南 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
ASTM D 6443-2004 波长色散X射线荧光光谱法测定未用润滑油和添加剂中钙、氯、铜、镁、磷、硫和锌的标准试验方法(数学修正程序 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D 6448-2004 来自用过的润滑油的工业燃烧器燃料的标准规范 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM D 6481-1999 用能量扩散X射线荧光光谱测定法测定润滑油中磷、硫、钙和锌的标准试验方法 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM D 6547-2000 双金属电偶用润滑液防腐性能的标准试验方法 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
ASTM D 6553-2000 导轨润滑剂冷却能力的标准试验方法 Standard Test Method for Coolant Compatibility of Way Lubricants
ASTM D 6595-2000 用旋转盘电极原子发射光谱法测定已用润滑油或已用液压流体中杂质的标准试验方法 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 6731-2001 封闭的呼吸器中润滑剂或润滑组分水中需氧生物降解能力测定的标准试验方法 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
ASTM D 6792-2007 石油产品和润滑剂测试实验室中质量体系的标准实施规程 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 6821-2002 恒定剪切应力粘度计中传动线路润滑剂的低温粘度的标准试验方法 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D 6823-2002 掺有用过的润滑油的商用锅炉燃料标准规范 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM D 6898-2003 用喷油泵装置评价柴油润滑性的标准试验方法 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
ASTM D 7038-2007 汽车齿轮润滑剂抗湿腐蚀性的评估用标准试验方法 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
ASTM D 7097a-2006 用热氧化机械润滑油模拟试验(TEOST MHT)测定适度高温活塞沉积物的标试验方法 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
ASTM D 7098-2006 用薄膜氧气吸收(TFOUT)催化剂B测定润滑剂氧化稳定性的标准试验方法 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D 7107-2004 自润滑套管的蠕变测量的标准试验方法 Standard Test Method for Creep Measurement of Self-Lubricating Bushings
ASTM D 7155-2006 评估涡轮机润滑油混合物互溶性的标准实施规程 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D 7214-2007 利用峰面积积分用FT-IR测定已使用润滑剂中氧化物的标准试验方法 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D 7260-2006 石油产品和润滑剂的元素分析的感应耦合等离子体-原子发散光谱法(ICP-AES)的识别、校正和最优化的标准规程 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 7303-2006 用感应耦合等离子体原子发射分光光谱测定法测定润滑脂中金属的标准试验方法 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7317-2007 用纸过滤使用过的润滑油中凝结戊烷不溶物用标准试验方法(LMOA法) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM D 7342-2007 水存在下润滑脂剪切稳定性的标准试验方法(水稳定性试验) Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM D 7343-2007 石油产品和润滑剂元素分析用X射线荧光光谱法的优化、制样、校正和鉴定的实施规程 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 7373-2007 用生物动力学模型预测润滑油生物可降解性的标准试验方法 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
ASTM D 892-2006 润滑油起泡特性的标准试验方法 Standard Test Method for Foaming Characteristics of Lubricating Oils
ASTM D 893a-2005 用过的润滑油中不溶解物的标准试验方法 Standard Test Method for Insolubles In Used Lubricating Oils
ASTM D 91-2002 润滑油的沉淀值标准试验方法 Standard Test Method for Precipitation Number of Lubricating Oils
ASTM D 942-2002 氧弹法测定润滑脂氧化稳定性的标准试验方法 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
ASTM D 972-2002 润滑脂和润滑油蒸发损失的标准试验方法 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
ASTM E 2336-2004 耐火润滑脂管道密封系统的标准试验方法 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E 2412-2004 利用傅立叶变换红外线(FT-IR)光谱测定法通过趋势分析监测使用过的润滑剂状态的标准实施规程 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM F 119-1982 挠性阻挡层材料润滑脂渗透率的试验方法 Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
ASTM F 1567-1994 制造的或铸造的自动清洗燃料油和润滑油过滤器标准规范 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASTM F 2161-2001 轴承润滑剂测量仪器及精度的标准指南.第1部分:油 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils
ASTM F 2489-2006 仪器和精密轴承润滑剂的标准指南.第2部分:润滑脂 Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases
ASTM F 2519-2005 商用厨房过滤器和萃取器的润滑脂颗粒捕获效率的标准试验方法 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
ASTM F 2661-2007 用螺旋轨道磨擦计测定液体润滑剂磨擦学性能和相对寿命的标准试验方法 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
ASTM F 670-2002 5和10加仑(20和40升)的润滑油配料容器的标准规范 Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
ASTM G 164-1999 挠性网状物表面润滑性测定的标准试验方法 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM G 181-2004 在润滑条件下进行活塞环和缸衬材料摩擦试验的标准实施规程 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM PS 74-1998 用重量分析测定法测定水中油和润滑脂(溶解的可萃取物质)的临时标准试验方法 Provisional Standard Test Method for Oil and Grease (Solvent Extractable Substances) in Water by Gravimetric Determination
编号 中文名称 英文名称

返回